diff mbox

[v4,13/21] powerpc/powernv: Introduce pnv_pci_poll()

Message ID 1430460188-31343-14-git-send-email-gwshan@linux.vnet.ibm.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Gavin Shan May 1, 2015, 6:03 a.m. UTC
We might not get some PCI slot information (e.g. power status)
immediately by OPAL API. Instead, opal_pci_poll() need to be called
for the required information.

The patch introduces pnv_pci_poll(), which bases on original
pnv_eeh_poll(), to cover the above case

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/powernv/eeh-powernv.c | 28 ++--------------------------
 arch/powerpc/platforms/powernv/pci.c         | 16 ++++++++++++++++
 arch/powerpc/platforms/powernv/pci.h         |  1 +
 3 files changed, 19 insertions(+), 26 deletions(-)

Comments

Alexey Kardashevskiy May 9, 2015, 2:30 p.m. UTC | #1
On 05/01/2015 04:03 PM, Gavin Shan wrote:
> We might not get some PCI slot information (e.g. power status)
> immediately by OPAL API. Instead, opal_pci_poll() need to be called
> for the required information.
>
> The patch introduces pnv_pci_poll(), which bases on original
> pnv_eeh_poll(), to cover the above case
>
> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
> ---
>   arch/powerpc/platforms/powernv/eeh-powernv.c | 28 ++--------------------------
>   arch/powerpc/platforms/powernv/pci.c         | 16 ++++++++++++++++
>   arch/powerpc/platforms/powernv/pci.h         |  1 +
>   3 files changed, 19 insertions(+), 26 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
> index 58e4dcf..9253b9e 100644
> --- a/arch/powerpc/platforms/powernv/eeh-powernv.c
> +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
> @@ -742,24 +742,6 @@ static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
>   	return ret;
>   }
>
> -static s64 pnv_eeh_poll(uint64_t id)
> -{
> -	s64 rc = OPAL_HARDWARE;
> -
> -	while (1) {
> -		rc = opal_pci_poll(id, NULL);
> -		if (rc <= 0)
> -			break;
> -
> -		if (system_state < SYSTEM_RUNNING)
> -			udelay(1000 * rc);
> -		else
> -			msleep(rc);
> -	}
> -
> -	return rc;
> -}
> -
>   int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
>   {
>   	struct pnv_phb *phb = hose->private_data;
> @@ -788,10 +770,7 @@ int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
>
>   	/* Issue reset and poll until it's completed */
>   	rc = opal_pci_reset(phb->opal_id, scope, OPAL_ASSERT_RESET);
> -	if (rc > 0)
> -		rc = pnv_eeh_poll(phb->opal_id);
> -
> -	return (rc == OPAL_SUCCESS) ? 0 : -EIO;
> +	return pnv_pci_poll(phb->opal_id, rc, NULL);


You are carrying a negative value to the new helper too? Looks complicated.

Also, before you only cared if opal_pci_reset() returned negative value, 
now you treat it as a timeout, is it new change to OPAL or it has always 
been there?


>   }
>
>   static int __pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
> @@ -882,10 +861,7 @@ static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
>   	phb = hose->private_data;
>   	id |= (dev->bus->number << 24) | (dev->devfn << 16) | phb->opal_id;
>   	rc = opal_pci_reset(id, scope, OPAL_ASSERT_RESET);
> -	if (rc > 0)
> -		rc = pnv_eeh_poll(id);
> -
> -	return (rc == OPAL_SUCCESS) ? 0 : -EIO;
> +	return pnv_pci_poll(id, rc, NULL);
>   }
>
>   static int pnv_pci_dev_reset_type(struct pci_dev *pdev, void *data)
> diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
> index bca2aeb..a2da9a3 100644
> --- a/arch/powerpc/platforms/powernv/pci.c
> +++ b/arch/powerpc/platforms/powernv/pci.c
> @@ -44,6 +44,22 @@
>   #define cfg_dbg(fmt...)	do { } while(0)
>   //#define cfg_dbg(fmt...)	printk(fmt)
>
> +int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval)
> +{
> +	while (rval > 0) {
> +		if (system_state < SYSTEM_RUNNING)
> +			udelay(1000 * rval);
> +		else
> +			msleep(rval);

Are these delays the once removed by "PATCH v4 09/21] powerpc/powernv: Use 
PCI slot reset infrastructure"? If so, I would merge this patch into 09/24 
or move this one before that one, for bisect'ability.


> +
> +		rval = opal_pci_poll(id, pval);
> +		if (rval == OPAL_SUCCESS && pval)
> +			rval = opal_pci_poll(id, pval);

Why calling it twice?


> +	}
> +
> +	return rval ? -EIO : 0;
> +}
> +
>   #ifdef CONFIG_PCI_MSI
>   static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
>   {
> diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
> index 8b10f01..82c5539 100644
> --- a/arch/powerpc/platforms/powernv/pci.h
> +++ b/arch/powerpc/platforms/powernv/pci.h
> @@ -202,6 +202,7 @@ struct pnv_phb {
>
>   extern struct pci_ops pnv_pci_ops;
>
> +int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval);
>   void pnv_pci_dump_phb_diag_data(struct pci_controller *hose,
>   				unsigned char *log_buff);
>   int pnv_pci_cfg_read(struct pci_dn *pdn,
>
Gavin Shan May 11, 2015, 7:19 a.m. UTC | #2
On Sun, May 10, 2015 at 12:30:07AM +1000, Alexey Kardashevskiy wrote:
>On 05/01/2015 04:03 PM, Gavin Shan wrote:
>>We might not get some PCI slot information (e.g. power status)
>>immediately by OPAL API. Instead, opal_pci_poll() need to be called
>>for the required information.
>>
>>The patch introduces pnv_pci_poll(), which bases on original
>>pnv_eeh_poll(), to cover the above case
>>
>>Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
>>---
>>  arch/powerpc/platforms/powernv/eeh-powernv.c | 28 ++--------------------------
>>  arch/powerpc/platforms/powernv/pci.c         | 16 ++++++++++++++++
>>  arch/powerpc/platforms/powernv/pci.h         |  1 +
>>  3 files changed, 19 insertions(+), 26 deletions(-)
>>
>>diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
>>index 58e4dcf..9253b9e 100644
>>--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
>>+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
>>@@ -742,24 +742,6 @@ static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
>>  	return ret;
>>  }
>>
>>-static s64 pnv_eeh_poll(uint64_t id)
>>-{
>>-	s64 rc = OPAL_HARDWARE;
>>-
>>-	while (1) {
>>-		rc = opal_pci_poll(id, NULL);
>>-		if (rc <= 0)
>>-			break;
>>-
>>-		if (system_state < SYSTEM_RUNNING)
>>-			udelay(1000 * rc);
>>-		else
>>-			msleep(rc);
>>-	}
>>-
>>-	return rc;
>>-}
>>-
>>  int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
>>  {
>>  	struct pnv_phb *phb = hose->private_data;
>>@@ -788,10 +770,7 @@ int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
>>
>>  	/* Issue reset and poll until it's completed */
>>  	rc = opal_pci_reset(phb->opal_id, scope, OPAL_ASSERT_RESET);
>>-	if (rc > 0)
>>-		rc = pnv_eeh_poll(phb->opal_id);
>>-
>>-	return (rc == OPAL_SUCCESS) ? 0 : -EIO;
>>+	return pnv_pci_poll(phb->opal_id, rc, NULL);
>
>
>You are carrying a negative value to the new helper too? Looks complicated.
>

Yes, a bit complicated :-)

>Also, before you only cared if opal_pci_reset() returned negative value, now
>you treat it as a timeout, is it new change to OPAL or it has always been
>there?
>

No, I didn't change the behaviour from skiboot side. The function should
have following return values:

0 - success; <0 - Error; >0 - Delay in ms;

>
>>  }
>>
>>  static int __pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
>>@@ -882,10 +861,7 @@ static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
>>  	phb = hose->private_data;
>>  	id |= (dev->bus->number << 24) | (dev->devfn << 16) | phb->opal_id;
>>  	rc = opal_pci_reset(id, scope, OPAL_ASSERT_RESET);
>>-	if (rc > 0)
>>-		rc = pnv_eeh_poll(id);
>>-
>>-	return (rc == OPAL_SUCCESS) ? 0 : -EIO;
>>+	return pnv_pci_poll(id, rc, NULL);
>>  }
>>
>>  static int pnv_pci_dev_reset_type(struct pci_dev *pdev, void *data)
>>diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
>>index bca2aeb..a2da9a3 100644
>>--- a/arch/powerpc/platforms/powernv/pci.c
>>+++ b/arch/powerpc/platforms/powernv/pci.c
>>@@ -44,6 +44,22 @@
>>  #define cfg_dbg(fmt...)	do { } while(0)
>>  //#define cfg_dbg(fmt...)	printk(fmt)
>>
>>+int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval)
>>+{
>>+	while (rval > 0) {
>>+		if (system_state < SYSTEM_RUNNING)
>>+			udelay(1000 * rval);
>>+		else
>>+			msleep(rval);
>
>Are these delays the once removed by "PATCH v4 09/21] powerpc/powernv: Use
>PCI slot reset infrastructure"? If so, I would merge this patch into 09/24 or
>move this one before that one, for bisect'ability.
>

No, they are different. The delay here is expected from skiboot firmware, but
that one in "PATCH v4 09/21" is expected from kernel itself.

>
>>+
>>+		rval = opal_pci_poll(id, pval);
>>+		if (rval == OPAL_SUCCESS && pval)
>>+			rval = opal_pci_poll(id, pval);
>
>Why calling it twice?
>

When retrieving slot's presence or power status, we have to do so as the opal_pci_poll()
is implemented like that. It means the first OPAL_SUCCESS from opal_pci_poll() indicates
the state machine, by which the function is implemented has finished. The next call to
the same function will get the result.

>>+	}
>>+
>>+	return rval ? -EIO : 0;
>>+}
>>+
>>  #ifdef CONFIG_PCI_MSI
>>  static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
>>  {
>>diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
>>index 8b10f01..82c5539 100644
>>--- a/arch/powerpc/platforms/powernv/pci.h
>>+++ b/arch/powerpc/platforms/powernv/pci.h
>>@@ -202,6 +202,7 @@ struct pnv_phb {
>>
>>  extern struct pci_ops pnv_pci_ops;
>>
>>+int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval);
>>  void pnv_pci_dump_phb_diag_data(struct pci_controller *hose,
>>  				unsigned char *log_buff);
>>  int pnv_pci_cfg_read(struct pci_dn *pdn,
>>

Thanks,
Gavin

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c
index 58e4dcf..9253b9e 100644
--- a/arch/powerpc/platforms/powernv/eeh-powernv.c
+++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
@@ -742,24 +742,6 @@  static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
 	return ret;
 }
 
-static s64 pnv_eeh_poll(uint64_t id)
-{
-	s64 rc = OPAL_HARDWARE;
-
-	while (1) {
-		rc = opal_pci_poll(id, NULL);
-		if (rc <= 0)
-			break;
-
-		if (system_state < SYSTEM_RUNNING)
-			udelay(1000 * rc);
-		else
-			msleep(rc);
-	}
-
-	return rc;
-}
-
 int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
 {
 	struct pnv_phb *phb = hose->private_data;
@@ -788,10 +770,7 @@  int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
 
 	/* Issue reset and poll until it's completed */
 	rc = opal_pci_reset(phb->opal_id, scope, OPAL_ASSERT_RESET);
-	if (rc > 0)
-		rc = pnv_eeh_poll(phb->opal_id);
-
-	return (rc == OPAL_SUCCESS) ? 0 : -EIO;
+	return pnv_pci_poll(phb->opal_id, rc, NULL);
 }
 
 static int __pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
@@ -882,10 +861,7 @@  static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
 	phb = hose->private_data;
 	id |= (dev->bus->number << 24) | (dev->devfn << 16) | phb->opal_id;
 	rc = opal_pci_reset(id, scope, OPAL_ASSERT_RESET);
-	if (rc > 0)
-		rc = pnv_eeh_poll(id);
-
-	return (rc == OPAL_SUCCESS) ? 0 : -EIO;
+	return pnv_pci_poll(id, rc, NULL);
 }
 
 static int pnv_pci_dev_reset_type(struct pci_dev *pdev, void *data)
diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
index bca2aeb..a2da9a3 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -44,6 +44,22 @@ 
 #define cfg_dbg(fmt...)	do { } while(0)
 //#define cfg_dbg(fmt...)	printk(fmt)
 
+int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval)
+{
+	while (rval > 0) {
+		if (system_state < SYSTEM_RUNNING)
+			udelay(1000 * rval);
+		else
+			msleep(rval);
+
+		rval = opal_pci_poll(id, pval);
+		if (rval == OPAL_SUCCESS && pval)
+			rval = opal_pci_poll(id, pval);
+	}
+
+	return rval ? -EIO : 0;
+}
+
 #ifdef CONFIG_PCI_MSI
 static int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 {
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 8b10f01..82c5539 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -202,6 +202,7 @@  struct pnv_phb {
 
 extern struct pci_ops pnv_pci_ops;
 
+int pnv_pci_poll(uint64_t id, int64_t rval, uint8_t *pval);
 void pnv_pci_dump_phb_diag_data(struct pci_controller *hose,
 				unsigned char *log_buff);
 int pnv_pci_cfg_read(struct pci_dn *pdn,