[v3,06/12] KVM: arm64: guest debug, add SW break point support
diff mbox

Message ID 1430929407-3487-7-git-send-email-alex.bennee@linaro.org
State New
Headers show

Commit Message

Alex Bennée May 6, 2015, 4:23 p.m. UTC
This adds support for SW breakpoints inserted by userspace.

We do this by trapping all guest software debug exceptions to the
hypervisor (MDCR_EL2.TDE). The exit handler sets an exit reason of
KVM_EXIT_DEBUG with the kvm_debug_exit_arch structure holding the
exception syndrome information.

It will be up to userspace to extract the PC (via GET_ONE_REG) and
determine if the debug event was for a breakpoint it inserted. If not
userspace will need to re-inject the correct exception restart the
hypervisor to deliver the debug exception to the guest.

Any other guest software debug exception (e.g. single step or HW
assisted breakpoints) will cause an error and the VM to be killed. This
is addressed by later patches which add support for the other debug
types.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

---
v2
  - update to use new exit struct
  - tweak for C setup
  - do our setup in debug_setup/clear code
  - fixed up comments
v3:
  - fix spacing in KVM_GUESTDBG_VALID_MASK
  - fix and clarify wording on kvm_handle_guest_debug
  - handle error case in kvm_handle_guest_debug
  - re-word the commit message

Comments

Christoffer Dall May 8, 2015, 11:52 a.m. UTC | #1
On Wed, May 06, 2015 at 05:23:21PM +0100, Alex Bennée wrote:
> This adds support for SW breakpoints inserted by userspace.
> 
> We do this by trapping all guest software debug exceptions to the
> hypervisor (MDCR_EL2.TDE). The exit handler sets an exit reason of
> KVM_EXIT_DEBUG with the kvm_debug_exit_arch structure holding the
> exception syndrome information.
> 
> It will be up to userspace to extract the PC (via GET_ONE_REG) and
> determine if the debug event was for a breakpoint it inserted. If not
> userspace will need to re-inject the correct exception restart the
> hypervisor to deliver the debug exception to the guest.
> 
> Any other guest software debug exception (e.g. single step or HW
> assisted breakpoints) will cause an error and the VM to be killed. This
> is addressed by later patches which add support for the other debug
> types.
> 
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> 
> ---
> v2
>   - update to use new exit struct
>   - tweak for C setup
>   - do our setup in debug_setup/clear code
>   - fixed up comments
> v3:
>   - fix spacing in KVM_GUESTDBG_VALID_MASK
>   - fix and clarify wording on kvm_handle_guest_debug
>   - handle error case in kvm_handle_guest_debug
>   - re-word the commit message
> 
> diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> index 4b0132f..5ef937c 100644
> --- a/Documentation/virtual/kvm/api.txt
> +++ b/Documentation/virtual/kvm/api.txt
> @@ -2667,7 +2667,7 @@ when running. Common control bits are:
>  The top 16 bits of the control field are architecture specific control
>  flags which can include the following:
>  
> -  - KVM_GUESTDBG_USE_SW_BP:     using software breakpoints [x86]
> +  - KVM_GUESTDBG_USE_SW_BP:     using software breakpoints [x86, arm64]
>    - KVM_GUESTDBG_USE_HW_BP:     using hardware breakpoints [x86, s390]
>    - KVM_GUESTDBG_INJECT_DB:     inject DB type exception [x86]
>    - KVM_GUESTDBG_INJECT_BP:     inject BP type exception [x86]
> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> index 4a274e1..064c105 100644
> --- a/arch/arm/kvm/arm.c
> +++ b/arch/arm/kvm/arm.c
> @@ -302,7 +302,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
>  	kvm_arm_set_running_vcpu(NULL);
>  }
>  
> -#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE)
> +#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)
>  
>  /**
>   * kvm_arch_vcpu_ioctl_set_guest_debug - set up guest debugging
> diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
> index b1f8731..5bee676 100644
> --- a/arch/arm64/kvm/debug.c
> +++ b/arch/arm64/kvm/debug.c
> @@ -75,6 +75,12 @@ void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
>  	else
>  		vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDA;
>  
> +	/* Trap breakpoints? */
> +	if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
> +		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
> +	else
> +		vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDE;
> +

I also don't think you need the else-clause here.

>  }
>  
>  void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
> diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
> index 524fa25..27f38a9 100644
> --- a/arch/arm64/kvm/handle_exit.c
> +++ b/arch/arm64/kvm/handle_exit.c
> @@ -82,6 +82,40 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
>  	return 1;
>  }
>  
> +/**
> + * kvm_handle_guest_debug - handle a debug exception instruction
> + *
> + * @vcpu:	the vcpu pointer
> + * @run:	access to the kvm_run structure for results
> + *
> + * We route all debug exceptions through the same handler. If both the
> + * guest and host are using the same debug facilities it will be up to
> + * userspace to re-inject the correct exception for guest delivery.
> + *
> + * @return: 0 (while setting run->exit_reason), -1 for error
> + */
> +static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu, struct kvm_run *run)
> +{
> +	u32 hsr = kvm_vcpu_get_hsr(vcpu);
> +	int ret = 0;
> +
> +	run->exit_reason = KVM_EXIT_DEBUG;
> +	run->debug.arch.hsr = hsr;
> +
> +	switch (hsr >> ESR_ELx_EC_SHIFT) {
> +	case ESR_ELx_EC_BKPT32:
> +	case ESR_ELx_EC_BRK64:
> +		break;
> +	default:
> +		kvm_err("%s: un-handled case hsr: %#08x\n",
> +			__func__, (unsigned int) hsr);
> +		ret = -1;
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
>  static exit_handle_fn arm_exit_handlers[] = {
>  	[ESR_ELx_EC_WFx]	= kvm_handle_wfx,
>  	[ESR_ELx_EC_CP15_32]	= kvm_handle_cp15_32,
> @@ -96,6 +130,8 @@ static exit_handle_fn arm_exit_handlers[] = {
>  	[ESR_ELx_EC_SYS64]	= kvm_handle_sys_reg,
>  	[ESR_ELx_EC_IABT_LOW]	= kvm_handle_guest_abort,
>  	[ESR_ELx_EC_DABT_LOW]	= kvm_handle_guest_abort,
> +	[ESR_ELx_EC_BKPT32]	= kvm_handle_guest_debug,
> +	[ESR_ELx_EC_BRK64]	= kvm_handle_guest_debug,
>  };
>  
>  static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu)
> -- 
> 2.3.5
> 

Besides the nit:

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 4b0132f..5ef937c 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -2667,7 +2667,7 @@  when running. Common control bits are:
 The top 16 bits of the control field are architecture specific control
 flags which can include the following:
 
-  - KVM_GUESTDBG_USE_SW_BP:     using software breakpoints [x86]
+  - KVM_GUESTDBG_USE_SW_BP:     using software breakpoints [x86, arm64]
   - KVM_GUESTDBG_USE_HW_BP:     using hardware breakpoints [x86, s390]
   - KVM_GUESTDBG_INJECT_DB:     inject DB type exception [x86]
   - KVM_GUESTDBG_INJECT_BP:     inject BP type exception [x86]
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 4a274e1..064c105 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -302,7 +302,7 @@  void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 	kvm_arm_set_running_vcpu(NULL);
 }
 
-#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE)
+#define KVM_GUESTDBG_VALID_MASK (KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_USE_SW_BP)
 
 /**
  * kvm_arch_vcpu_ioctl_set_guest_debug - set up guest debugging
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index b1f8731..5bee676 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -75,6 +75,12 @@  void kvm_arm_setup_debug(struct kvm_vcpu *vcpu)
 	else
 		vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDA;
 
+	/* Trap breakpoints? */
+	if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
+		vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
+	else
+		vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDE;
+
 }
 
 void kvm_arm_clear_debug(struct kvm_vcpu *vcpu)
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index 524fa25..27f38a9 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -82,6 +82,40 @@  static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	return 1;
 }
 
+/**
+ * kvm_handle_guest_debug - handle a debug exception instruction
+ *
+ * @vcpu:	the vcpu pointer
+ * @run:	access to the kvm_run structure for results
+ *
+ * We route all debug exceptions through the same handler. If both the
+ * guest and host are using the same debug facilities it will be up to
+ * userspace to re-inject the correct exception for guest delivery.
+ *
+ * @return: 0 (while setting run->exit_reason), -1 for error
+ */
+static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+	u32 hsr = kvm_vcpu_get_hsr(vcpu);
+	int ret = 0;
+
+	run->exit_reason = KVM_EXIT_DEBUG;
+	run->debug.arch.hsr = hsr;
+
+	switch (hsr >> ESR_ELx_EC_SHIFT) {
+	case ESR_ELx_EC_BKPT32:
+	case ESR_ELx_EC_BRK64:
+		break;
+	default:
+		kvm_err("%s: un-handled case hsr: %#08x\n",
+			__func__, (unsigned int) hsr);
+		ret = -1;
+		break;
+	}
+
+	return ret;
+}
+
 static exit_handle_fn arm_exit_handlers[] = {
 	[ESR_ELx_EC_WFx]	= kvm_handle_wfx,
 	[ESR_ELx_EC_CP15_32]	= kvm_handle_cp15_32,
@@ -96,6 +130,8 @@  static exit_handle_fn arm_exit_handlers[] = {
 	[ESR_ELx_EC_SYS64]	= kvm_handle_sys_reg,
 	[ESR_ELx_EC_IABT_LOW]	= kvm_handle_guest_abort,
 	[ESR_ELx_EC_DABT_LOW]	= kvm_handle_guest_abort,
+	[ESR_ELx_EC_BKPT32]	= kvm_handle_guest_debug,
+	[ESR_ELx_EC_BRK64]	= kvm_handle_guest_debug,
 };
 
 static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu)