@@ -5,6 +5,7 @@
* Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
* Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
* Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ * Copyright (c) 2009 Sebastian Kapfer <sebastian_kapfer@gmx.net>
*
* ALPS detection, tap switching and status querying info is taken from
* tpconfig utility (by C. Scott Ananian and Bruce Kall).
@@ -37,6 +38,9 @@
#define ALPS_FW_BK_1 0x10 /* front & back buttons present */
#define ALPS_FW_BK_2 0x20 /* front & back buttons present */
#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
+#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
+ 6-byte ALPS packet */
+#define ALPS_SHARED_BTNSTATE 0x100 /* PS/2 and touchpad share button st. */
static const struct alps_model_info alps_model_data[] = {
@@ -58,7 +62,9 @@ static const struct alps_model_info alps_model_data[] = {
{ { 0x20, 0x02, 0x0e }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
{ { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
- { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude E6500 */
+ /* Dell Latitude E6400, E6500, E5500, Precision M4400 */
+ { { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
+ ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED | ALPS_SHARED_BTNSTATE },
{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
};
@@ -69,7 +75,13 @@ static const struct alps_model_info alps_model_data[] = {
*/
/*
- * ALPS abolute Mode - new format
+ * PS/2 packet format
+ *
+ * byte 0: YOFL XOFL YSGN XSGN 1 M R L
+ * byte 1: X7 X6 X5 X4 X3 X2 X1 X0
+ * byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ *
+ * ALPS absolute Mode - new format
*
* byte 0: 1 ? ? ? 1 ? ? ?
* byte 1: 0 x6 x5 x4 x3 x2 x1 x0
@@ -78,11 +90,54 @@ static const struct alps_model_info alps_model_data[] = {
* byte 4: 0 y6 y5 y4 y3 y2 y1 y0
* byte 5: 0 z6 z5 z4 z3 z2 z1 z0
*
+ * Dualpoint device -- interleaved packet format
+ *
+ * byte 0: 1 1 0 0 1 1 1 1
+ * byte 1: 0 x6 x5 x4 x3 x2 x1 x0
+ * byte 2: 0 x10 x9 x8 x7 0 fin ges
+ * byte 3: YOFL XOFL YSGN XSGN 1 1 1 1
+ * byte 4: X7 X6 X5 X4 X3 X2 X1 X0
+ * byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
+ * byte 6: 0 y9 y8 y7 1 m r l
+ * byte 7: 0 y6 y5 y4 y3 y2 y1 y0
+ * byte 8: 0 z6 z5 z4 z3 z2 z1 z0
+ *
+ * CAPITALS = stick, miniscules = touchpad
+ *
* ?'s can have different meanings on different models,
* such as wheel rotation, extra buttons, stick buttons
* on a dualpoint, etc.
*/
+/* at least some Alps units merge the mouse buttons of the touchpad and the
+ * PS/2 passthrough. for the ALPS_PS2_INTERLEAVED units, we then can't
+ * distinguish which device a click came from, since the button bit in the
+ * interleaved packet could mean that either of the devices sent a click.
+ * (this has been tested in the field for all models except the M4400.)
+ * we route all the button clicks to the touchpad device.
+ * otherwise we easily end up with hung buttons.
+ */
+static void alps_report_buttons(struct psmouse *psmouse,
+ int left, int right, int middle,
+ struct input_dev *preferred_dev)
+{
+ struct alps_data *priv = psmouse->private;
+ const struct alps_model_info *model = priv->i;
+ struct input_dev *dev = preferred_dev;
+
+ if (model->flags & ALPS_SHARED_BTNSTATE
+ && model->flags & ALPS_PS2_INTERLEAVED)
+ dev = psmouse->dev;
+
+ input_report_key(dev, BTN_LEFT, left);
+ input_report_key(dev, BTN_RIGHT, right);
+ input_report_key(dev, BTN_MIDDLE, middle);
+
+ /* calling code will input_sync the preferred_dev */
+ if (preferred_dev != dev)
+ input_sync(dev);
+}
+
static void alps_process_packet(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
@@ -93,18 +148,6 @@ static void alps_process_packet(struct psmouse *psmouse)
int x, y, z, ges, fin, left, right, middle;
int back = 0, forward = 0;
- if ((packet[0] & 0xc8) == 0x08) { /* 3-byte PS/2 packet */
- input_report_key(dev2, BTN_LEFT, packet[0] & 1);
- input_report_key(dev2, BTN_RIGHT, packet[0] & 2);
- input_report_key(dev2, BTN_MIDDLE, packet[0] & 4);
- input_report_rel(dev2, REL_X,
- packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
- input_report_rel(dev2, REL_Y,
- packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
- input_sync(dev2);
- return;
- }
-
if (model->flags & ALPS_OLDPROTO) {
left = packet[2] & 0x10;
right = packet[2] & 0x08;
@@ -140,18 +183,13 @@ static void alps_process_packet(struct psmouse *psmouse)
input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x));
input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
- input_report_key(dev2, BTN_LEFT, left);
- input_report_key(dev2, BTN_RIGHT, right);
- input_report_key(dev2, BTN_MIDDLE, middle);
+ alps_report_buttons(psmouse, left, right, middle, dev2);
- input_sync(dev);
input_sync(dev2);
return;
}
- input_report_key(dev, BTN_LEFT, left);
- input_report_key(dev, BTN_RIGHT, right);
- input_report_key(dev, BTN_MIDDLE, middle);
+ alps_report_buttons(psmouse, left, right, middle, dev);
/* Convert hardware tap to a reasonable Z value */
if (ges && !fin)
@@ -202,25 +240,147 @@ static void alps_process_packet(struct psmouse *psmouse)
input_sync(dev);
}
+static void alps_report_bare_ps2_packet(unsigned char packet[],
+ struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+ struct input_dev *dev2 = priv->dev2;
+
+ alps_report_buttons(psmouse, packet[0] & 1, packet[0] & 2,
+ packet[0] & 4, dev2);
+ input_report_rel(dev2, REL_X,
+ packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
+ input_report_rel(dev2, REL_Y,
+ packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
+ input_sync(dev2);
+}
+
+static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
+{
+ struct alps_data *priv = psmouse->private;
+
+ if (psmouse->pktcnt < 7) {
+ if (psmouse->pktcnt == 6 && !(psmouse->packet[3] & 0x80)) {
+ /*
+ * Need to time out before timeout in psmouse core
+ * code. 20 ms should be enough to decide if we are
+ * getting more data or not.
+ */
+ mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20));
+ }
+
+ return PSMOUSE_GOOD_DATA;
+ }
+
+ del_timer(&priv->timer);
+
+ if (psmouse->packet[6] & 0x80) {
+
+ /*
+ * Highest bit is set - that means we either had
+ * complete ALPS packet and this is start of the
+ * next packet or we got garbage.
+ */
+
+ if (((psmouse->packet[3] |
+ psmouse->packet[4] |
+ psmouse->packet[5]) & 0x80) ||
+ (psmouse->packet[6] & priv->i->mask0) != priv->i->byte0) {
+ dbg("refusing packet %x %x %x %x "
+ "(suspected interleaved ps/2)\n",
+ psmouse->packet[3], psmouse->packet[4],
+ psmouse->packet[5], psmouse->packet[6]);
+ return PSMOUSE_BAD_DATA;
+ }
+
+ alps_process_packet(psmouse);
+
+ /* Continue with the next packet */
+ psmouse->packet[0] = psmouse->packet[6];
+ psmouse->pktcnt = 1;
+
+ } else {
+
+ /*
+ * High bit is 0 - that means that we indeed
+ * got a PS/2 packet in the middle of ALPS packet
+ */
+
+ psmouse->packet[3] &= 0xf0 | (psmouse->packet[6] & 0x0f);
+ alps_report_bare_ps2_packet(&psmouse->packet[3], psmouse);
+
+ /*
+ * Continue with the standard ALPS protocol handling
+ */
+ psmouse->packet[3] = psmouse->packet[6];
+ psmouse->pktcnt = 4;
+ }
+
+ return PSMOUSE_GOOD_DATA;
+}
+
+static void alps_flush_packet(unsigned long data)
+{
+ struct psmouse *psmouse = (struct psmouse *)data;
+
+ serio_pause_rx(psmouse->ps2dev.serio);
+
+ if (psmouse->pktcnt == 6) {
+
+ /*
+ * We did not any more data in reasonable amount of time.
+ * Validate the last 3 bytes and process as a standard
+ * ALPS packet.
+ */
+ if ((psmouse->packet[3] |
+ psmouse->packet[4] |
+ psmouse->packet[5]) & 0x80) {
+ dbg("refusing packet %x %x %x "
+ "(suspected interleaved ps/2)\n",
+ psmouse->packet[3], psmouse->packet[4],
+ psmouse->packet[5]);
+ } else {
+ alps_process_packet(psmouse);
+ }
+ psmouse->pktcnt = 0;
+ }
+
+ serio_continue_rx(psmouse->ps2dev.serio);
+}
+
static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
+ const struct alps_model_info *model = priv->i;
if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */
if (psmouse->pktcnt == 3) {
- alps_process_packet(psmouse);
+ alps_report_bare_ps2_packet(psmouse->packet, psmouse);
return PSMOUSE_FULL_PACKET;
}
return PSMOUSE_GOOD_DATA;
}
- if ((psmouse->packet[0] & priv->i->mask0) != priv->i->byte0)
+ /* Check for PS/2 packet stuffed in the middle of ALPS packet. */
+
+ if ((model->flags & ALPS_PS2_INTERLEAVED) &&
+ psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
+ return alps_handle_interleaved_ps2(psmouse);
+ }
+
+ if ((psmouse->packet[0] & model->mask0) != model->byte0) {
+ dbg("refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
+ psmouse->packet[0], model->mask0, model->byte0);
return PSMOUSE_BAD_DATA;
+ }
/* Bytes 2 - 6 should have 0 in the highest bit */
if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
- (psmouse->packet[psmouse->pktcnt - 1] & 0x80))
+ (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
+ dbg("refusing packet[%i] = %x\n",
+ psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]);
return PSMOUSE_BAD_DATA;
+ }
if (psmouse->pktcnt == 6) {
alps_process_packet(psmouse);
@@ -459,6 +619,7 @@ static void alps_disconnect(struct psmouse *psmouse)
struct alps_data *priv = psmouse->private;
psmouse_reset(psmouse);
+ del_timer_sync(&priv->timer);
input_unregister_device(priv->dev2);
kfree(priv);
}
@@ -476,6 +637,8 @@ int alps_init(struct psmouse *psmouse)
goto init_fail;
priv->dev2 = dev2;
+ setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse);
+
psmouse->private = priv;
model = alps_get_model(psmouse, &version);
@@ -15,7 +15,7 @@
struct alps_model_info {
unsigned char signature[3];
unsigned char byte0, mask0;
- unsigned char flags;
+ unsigned int flags;
};
struct alps_data {
@@ -23,6 +23,7 @@ struct alps_data {
char phys[32]; /* Phys */
const struct alps_model_info *i;/* Info */
int prev_fin; /* Finger bit from previous packet */
+ struct timer_list timer;
};
#ifdef CONFIG_MOUSE_PS2_ALPS