@@ -26,6 +26,47 @@
#include "mmc-twl4030.h"
+#ifdef CONFIG_INPUT_KXTE9
+/* KIONIX KXTE9 Digital Tri-axis Accelerometer */
+#include <plat/mux.h>
+#include <linux/kxte9.h>
+#define ZOOM2_KIONIX_INT_GPIO 156
+
+static void __init zoom2_kionix_init(void)
+{
+ omap_cfg_reg(Y21_34XX_GPIO156);
+ if (gpio_request(ZOOM2_KIONIX_INT_GPIO, "kionix_irq") < 0) {
+ printk(KERN_ERR "kionix error retrieving GPIO\n");
+ return;
+ }
+ gpio_direction_input(ZOOM2_KIONIX_INT_GPIO);
+}
+
+static struct kxte9_platform_data zoom2_kxte9_data = {
+ .min_interval = 25,
+ .poll_interval = 200,
+
+ .axis_map_x = 0,
+ .axis_map_y = 1,
+ .axis_map_z = 2,
+
+ .negate_x = 0,
+ .negate_y = 0,
+ .negate_z = 0,
+
+ .ctrl_reg1_init = TPE | WUFE | B2SE,
+ .engine_odr_init = OB2S10 | OWUF40,
+ .int_ctrl_init = KXTE9_IEN | KXTE9_IEA,
+ .tilt_timer_init = 0x03,
+ .wuf_timer_init = 0x01,
+ .b2s_timer_init = 0x01,
+ .wuf_thresh_init = 0x20,
+ .b2s_thresh_init = 0x60,
+
+ .gpio = ZOOM2_KIONIX_INT_GPIO,
+};
+#endif
+
/* Zoom2 has Qwerty keyboard*/
static int board_keymap[] = {
KEY(0, 0, KEY_E),
@@ -250,17 +291,34 @@ static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
},
};
+#ifdef CONFIG_INPUT_KXTE9
+static struct i2c_board_info __initdata zoom2_i2c_bus2info[] = {
+ {
+ I2C_BOARD_INFO("kxte9", KXTE9_I2C_ADDR),
+ .platform_data = &zoom2_kxte9_data,
+ },
+};
+#endif
+
static int __init omap_i2c_init(void)
{
omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
ARRAY_SIZE(zoom_i2c_boardinfo));
+#ifndef CONFIG_INPUT_KXTE9
omap_register_i2c_bus(2, 400, NULL, 0);
+#else
+ omap_register_i2c_bus(2, 400, zoom2_i2c_bus2info,
+ ARRAY_SIZE(zoom2_i2c_bus2info));
+#endif
omap_register_i2c_bus(3, 400, NULL, 0);
return 0;
}
void __init zoom_peripherals_init(void)
{
+#ifdef CONFIG_INPUT_KXTE9
+ zoom2_kionix_init();
+#endif
omap_i2c_init();
omap_serial_init();
usb_musb_init();