[1/2] drm/i915/skl: Documentation for CSR firmware.
diff mbox

Message ID 1431415928-21270-1-git-send-email-animesh.manna@intel.com
State New
Headers show

Commit Message

Animesh Manna May 12, 2015, 7:32 a.m. UTC
Added docbook info regarding context save and restore (CSR)
firmware support added from gen9 onwards to drive newly added
DMC (Display microcontroller) in display engine.

Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com>
---
 Documentation/DocBook/drm.tmpl   | 22 +++++++++++++++++++++-
 drivers/gpu/drm/i915/intel_csr.c | 37 +++++++++++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+), 1 deletion(-)

Comments

Daniel Vetter May 12, 2015, 8:36 a.m. UTC | #1
On Tue, May 12, 2015 at 01:02:07PM +0530, Animesh Manna wrote:
> Added docbook info regarding context save and restore (CSR)
> firmware support added from gen9 onwards to drive newly added
> DMC (Display microcontroller) in display engine.
> 
> Signed-off-by: Animesh Manna <animesh.manna@intel.com>
> Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com>
> ---
>  Documentation/DocBook/drm.tmpl   | 22 +++++++++++++++++++++-
>  drivers/gpu/drm/i915/intel_csr.c | 37 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 58 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
> index 7c68ecc..217b4fc 100644
> --- a/Documentation/DocBook/drm.tmpl
> +++ b/Documentation/DocBook/drm.tmpl
> @@ -4153,6 +4153,27 @@ int num_ioctls;</synopsis>
>  	  </tgroup>
>  	</table>
>        </sect2>
> +
> +      <sect2>
> +       <title>CSR firmware support for DMC</title>
> +       <para>
> +     Display Context Save and Restore (CSR) firmware support added from gen9
> +     onwards to drive newly added DMC (Display microcontroller) in display
> +     engine to save and restore the state of display engine when it enter into
> +     low-power state and comes back to nomral. The above API are used to manage
> +     the firmware loading process.
> +       </para>
> +       <para>
> +     Firmware loading status will be one of the below states: FW_UNINITIALIZED,
> +     FW_LOADED, FW_FAILED.
> +       </para>
> +       <para>
> +     Once the firmware is written into the registers status will be moved from
> +     FW_UNINITIALIZED to FW_LOADED and for any erroneous condition status will
> +     be moved to FW_FAILED.

These kind of overview comments are best put into a DOC: section in the
sourcefiles and then pulled in like the function docs. There's lots of
examples for this in i915 already.
-Daniel

> +       </para>
> +!Idrivers/gpu/drm/i915/intel_csr.c
> +      </sect2>
>      </sect1>
>  
>      <sect1>
> @@ -4204,7 +4225,6 @@ int num_ioctls;</synopsis>
>  !Idrivers/gpu/drm/i915/i915_gem_shrinker.c
>        </sect2>
>      </sect1>
> -
>      <sect1>
>        <title> Tracing </title>
>        <para>
> diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c
> index 9311cdd..174106f 100644
> --- a/drivers/gpu/drm/i915/intel_csr.c
> +++ b/drivers/gpu/drm/i915/intel_csr.c
> @@ -183,6 +183,14 @@ static char intel_get_substepping(struct drm_device *dev)
>  		return -ENODATA;
>  }
>  
> +/**
> + * intel_csr_load_status_get() - to get firmware loading status.
> + * @dev_priv: i915 device.
> + *
> + * This function helps to get the firmware loading status.
> + *
> + * Return: Firmware loading status.
> + */
>  enum csr_state intel_csr_load_status_get(struct drm_i915_private *dev_priv)
>  {
>  	enum csr_state state;
> @@ -194,6 +202,13 @@ enum csr_state intel_csr_load_status_get(struct drm_i915_private *dev_priv)
>  	return state;
>  }
>  
> +/**
> + * intel_csr_load_status_set() - help to set firmware loading status.
> + * @dev_priv: i915 device.
> + * @state: enumeration of firmware loading status.
> + *
> + * Set the firmware loading status.
> + */
>  void intel_csr_load_status_set(struct drm_i915_private *dev_priv,
>  			enum csr_state state)
>  {
> @@ -202,6 +217,14 @@ void intel_csr_load_status_set(struct drm_i915_private *dev_priv,
>  	mutex_unlock(&dev_priv->csr_lock);
>  }
>  
> +/**
> + * intel_csr_load_program() - write the firmware from memory to register.
> + * @dev: drm device.
> + *
> + * CSR firmware is read from a .bin file and kept in internal memory one time.
> + * Everytime display comes back from low power state this function is called to
> + * copy the firmware from internal memory to registers.
> + */
>  void intel_csr_load_program(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -359,6 +382,13 @@ out:
>  	release_firmware(fw);
>  }
>  
> +/**
> + * intel_csr_ucode_init() - initialize the firmware loading.
> + * @dev: drm device.
> + *
> + * This function is called at the time of loading the display driver to read
> + * firmware from a .bin file and copied into a internal memory.
> + */
>  void intel_csr_ucode_init(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -393,6 +423,13 @@ void intel_csr_ucode_init(struct drm_device *dev)
>  	}
>  }
>  
> +/**
> + * intel_csr_ucode_fini() - unload the CSR firmware.
> + * @dev: drm device.
> + *
> + * Firmmware unloading includes freeing the internal momory and reset the
> + * firmware loading status.
> + */
>  void intel_csr_ucode_fini(struct drm_device *dev)
>  {
>  	struct drm_i915_private *dev_priv = dev->dev_private;
> -- 
> 2.0.2
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Patch
diff mbox

diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index 7c68ecc..217b4fc 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -4153,6 +4153,27 @@  int num_ioctls;</synopsis>
 	  </tgroup>
 	</table>
       </sect2>
+
+      <sect2>
+       <title>CSR firmware support for DMC</title>
+       <para>
+     Display Context Save and Restore (CSR) firmware support added from gen9
+     onwards to drive newly added DMC (Display microcontroller) in display
+     engine to save and restore the state of display engine when it enter into
+     low-power state and comes back to nomral. The above API are used to manage
+     the firmware loading process.
+       </para>
+       <para>
+     Firmware loading status will be one of the below states: FW_UNINITIALIZED,
+     FW_LOADED, FW_FAILED.
+       </para>
+       <para>
+     Once the firmware is written into the registers status will be moved from
+     FW_UNINITIALIZED to FW_LOADED and for any erroneous condition status will
+     be moved to FW_FAILED.
+       </para>
+!Idrivers/gpu/drm/i915/intel_csr.c
+      </sect2>
     </sect1>
 
     <sect1>
@@ -4204,7 +4225,6 @@  int num_ioctls;</synopsis>
 !Idrivers/gpu/drm/i915/i915_gem_shrinker.c
       </sect2>
     </sect1>
-
     <sect1>
       <title> Tracing </title>
       <para>
diff --git a/drivers/gpu/drm/i915/intel_csr.c b/drivers/gpu/drm/i915/intel_csr.c
index 9311cdd..174106f 100644
--- a/drivers/gpu/drm/i915/intel_csr.c
+++ b/drivers/gpu/drm/i915/intel_csr.c
@@ -183,6 +183,14 @@  static char intel_get_substepping(struct drm_device *dev)
 		return -ENODATA;
 }
 
+/**
+ * intel_csr_load_status_get() - to get firmware loading status.
+ * @dev_priv: i915 device.
+ *
+ * This function helps to get the firmware loading status.
+ *
+ * Return: Firmware loading status.
+ */
 enum csr_state intel_csr_load_status_get(struct drm_i915_private *dev_priv)
 {
 	enum csr_state state;
@@ -194,6 +202,13 @@  enum csr_state intel_csr_load_status_get(struct drm_i915_private *dev_priv)
 	return state;
 }
 
+/**
+ * intel_csr_load_status_set() - help to set firmware loading status.
+ * @dev_priv: i915 device.
+ * @state: enumeration of firmware loading status.
+ *
+ * Set the firmware loading status.
+ */
 void intel_csr_load_status_set(struct drm_i915_private *dev_priv,
 			enum csr_state state)
 {
@@ -202,6 +217,14 @@  void intel_csr_load_status_set(struct drm_i915_private *dev_priv,
 	mutex_unlock(&dev_priv->csr_lock);
 }
 
+/**
+ * intel_csr_load_program() - write the firmware from memory to register.
+ * @dev: drm device.
+ *
+ * CSR firmware is read from a .bin file and kept in internal memory one time.
+ * Everytime display comes back from low power state this function is called to
+ * copy the firmware from internal memory to registers.
+ */
 void intel_csr_load_program(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -359,6 +382,13 @@  out:
 	release_firmware(fw);
 }
 
+/**
+ * intel_csr_ucode_init() - initialize the firmware loading.
+ * @dev: drm device.
+ *
+ * This function is called at the time of loading the display driver to read
+ * firmware from a .bin file and copied into a internal memory.
+ */
 void intel_csr_ucode_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -393,6 +423,13 @@  void intel_csr_ucode_init(struct drm_device *dev)
 	}
 }
 
+/**
+ * intel_csr_ucode_fini() - unload the CSR firmware.
+ * @dev: drm device.
+ *
+ * Firmmware unloading includes freeing the internal momory and reset the
+ * firmware loading status.
+ */
 void intel_csr_ucode_fini(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;