@@ -82,12 +82,6 @@
cpu_on = <0x84000003>;
};
- uart_clk: dummy26m {
- compatible = "fixed-clock";
- clock-frequency = <26000000>;
- #clock-cells = <0>;
- };
-
clk26m: oscillator@0 {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -193,7 +187,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11002000 0 0x400>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -202,7 +197,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11003000 0 0x400>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -211,7 +207,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11004000 0 0x400>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+ clock-names = "baud", "bus";
status = "disabled";
};
@@ -220,7 +217,8 @@
"mediatek,mt6577-uart";
reg = <0 0x11005000 0 0x400>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&uart_clk>;
+ clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+ clock-names = "baud", "bus";
status = "disabled";
};
};
We used to use a fixed rate clock for the UARTs. Now that we have clock support we can associate the correct clocks to the UARTs and drop the 26MHz fixed rate UART clock. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-)