[RFC,v2,3/4] adv7604: Use interlaced info for cvt/gtf timing detection
diff mbox

Message ID 1432272457-709-4-git-send-email-prladdha@cisco.com
State New
Headers show

Commit Message

Prashant Laddha May 22, 2015, 5:27 a.m. UTC
The interlaced information from stdi is passed to detect_cvt/gtf().
These functions now supports timing calculations for interlaced
format.

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
---
 drivers/media/i2c/adv7604.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Patch
diff mbox

diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index f4ecb73..d290f7a 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -1323,12 +1323,12 @@  static int stdi2dv_timings(struct v4l2_subdev *sd,
 	if (v4l2_detect_cvt(stdi->lcf + 1, hfreq, stdi->lcvs,
 			(stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) |
 			(stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0),
-			false, timings))
+			stdi->interlaced, timings))
 		return 0;
 	if (v4l2_detect_gtf(stdi->lcf + 1, hfreq, stdi->lcvs,
 			(stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) |
 			(stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0),
-			false, state->aspect_ratio, timings))
+			stdi->interlaced, state->aspect_ratio, timings))
 		return 0;
 
 	v4l2_dbg(2, debug, sd,