ALSA: hda/realtek: Enable HP amp and mute LED on HP Folio 9480m
diff mbox

Message ID 86k2u1qlls.fsf@hiro.keithp.com
State New
Headers show

Commit Message

Keith Packard July 15, 2015, 7:14 p.m. UTC
Takashi Iwai <tiwai@suse.de> writes:

> Thanks!  The new patch looks good, but I think we don't have to use
> the headset code, as your case looks more like a headphone, not a
> combo headset that needs the special handling.  If so, the change can
> be reduced something like below.  Could you check whether this is
> enough?

Yes, that seems a lot simpler and works fine. I did remove the
led_power_filter setting; that doesn't seem relevant for GPIO-based
leds, and isn't necessary on my device in any case.

This patch is now otherwise essentially the same as yours, with the
addition of comments.

Thanks again for your help; it's always interesting to dive into some
different area of the kernel and see how it works.

Comments

Takashi Iwai July 16, 2015, 10:26 a.m. UTC | #1
On Wed, 15 Jul 2015 21:14:39 +0200,
Keith Packard wrote:
> 
> Takashi Iwai <tiwai@suse.de> writes:
> 
> > Thanks!  The new patch looks good, but I think we don't have to use
> > the headset code, as your case looks more like a headphone, not a
> > combo headset that needs the special handling.  If so, the change can
> > be reduced something like below.  Could you check whether this is
> > enough?
> 
> Yes, that seems a lot simpler and works fine. I did remove the
> led_power_filter setting; that doesn't seem relevant for GPIO-based
> leds, and isn't necessary on my device in any case.
> 
> This patch is now otherwise essentially the same as yours, with the
> addition of comments.
> 
> Thanks again for your help; it's always interesting to dive into some
> different area of the kernel and see how it works.

Great, I queued the patch now.  It'll be included in the next pull
request for 4.2-rc3.


thanks,

Takashi
Keith Packard July 16, 2015, 2:48 p.m. UTC | #2
Takashi Iwai <tiwai@suse.de> writes:

> Great, I queued the patch now.  It'll be included in the next pull
> request for 4.2-rc3.

Thanks -- you're an awesome maintainer.

Patch
diff mbox

From ca694a8c6d481fd327822dd2adec35e82affb2be Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Tue, 14 Jul 2015 09:30:33 -0700
Subject: [PATCH] ALSA: hda/realtek: Enable HP amp and mute LED on HP Folio
 9480m [v3]

This laptop needs GPIO4 pulled high to enable the headphone amplifier,
and has a mute LED on GPIO3. I modelled the patch on the existing
GPIO4 code which pulls the line low for the same purpose; this time,
the HP amp line is pulled high.

v2: Disable the headphone amplifier when no headphone is connected.
    Don't disable power savings to preserve the LED state.

v3: Remove headset-specific hooks and code; this is just a headphone.

Signed-off-by: Keith Packard <keithp@keithp.com>
---
 sound/pci/hda/patch_realtek.c | 55 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 6d01045..0e1f8c8 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4435,6 +4435,55 @@  static void alc290_fixup_mono_speakers(struct hda_codec *codec,
 	}
 }
 
+/* Hook to update amp GPIO4 for automute */
+static void alc280_hp_gpio4_automute_hook(struct hda_codec *codec,
+					  struct hda_jack_callback *jack)
+{
+	struct alc_spec *spec = codec->spec;
+
+	snd_hda_gen_hp_automute(codec, jack);
+	/* mute_led_polarity is set to 0, so we pass inverted value here */
+	alc_update_gpio_led(codec, 0x10, !spec->gen.hp_jack_present);
+}
+
+/* Manage GPIOs for HP EliteBook Folio 9480m.
+ *
+ * GPIO4 is the headphone amplifier power control
+ * GPIO3 is the audio output mute indicator LED
+ */
+
+static void alc280_fixup_hp_9480m(struct hda_codec *codec,
+				  const struct hda_fixup *fix,
+				  int action)
+{
+	struct alc_spec *spec = codec->spec;
+	static const struct hda_verb gpio_init[] = {
+		{ 0x01, AC_VERB_SET_GPIO_MASK, 0x18 },
+		{ 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x18 },
+		{}
+	};
+
+	if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+		/* Set the hooks to turn the headphone amp on/off
+		 * as needed
+		 */
+		spec->gen.vmaster_mute.hook = alc_fixup_gpio_mute_hook;
+		spec->gen.hp_automute_hook = alc280_hp_gpio4_automute_hook;
+
+		/* The GPIOs are currently off */
+		spec->gpio_led = 0;
+
+		/* GPIO3 is connected to the output mute LED,
+		 * high is on, low is off
+		 */
+		spec->mute_led_polarity = 0;
+		spec->gpio_mute_led_mask = 0x08;
+
+		/* Initialize GPIO configuration */
+		snd_hda_add_verbs(codec, gpio_init);
+	}
+}
+
 /* for hda_fixup_thinkpad_acpi() */
 #include "thinkpad_helper.c"
 
@@ -4512,6 +4561,7 @@  enum {
 	ALC286_FIXUP_HP_GPIO_LED,
 	ALC280_FIXUP_HP_GPIO2_MIC_HOTKEY,
 	ALC280_FIXUP_HP_DOCK_PINS,
+	ALC280_FIXUP_HP_9480M,
 	ALC288_FIXUP_DELL_HEADSET_MODE,
 	ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
 	ALC288_FIXUP_DELL_XPS_13_GPIO6,
@@ -5012,6 +5062,10 @@  static const struct hda_fixup alc269_fixups[] = {
 		.chained = true,
 		.chain_id = ALC280_FIXUP_HP_GPIO4
 	},
+	[ALC280_FIXUP_HP_9480M] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc280_fixup_hp_9480m,
+	},
 	[ALC288_FIXUP_DELL_HEADSET_MODE] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc_fixup_headset_mode_dell_alc288,
@@ -5103,6 +5157,7 @@  static const struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x22b7, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x22bf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
 	SND_PCI_QUIRK(0x103c, 0x22cf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
+	SND_PCI_QUIRK(0x103c, 0x22db, "HP", ALC280_FIXUP_HP_9480M),
 	SND_PCI_QUIRK(0x103c, 0x22dc, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
 	SND_PCI_QUIRK(0x103c, 0x22fb, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
 	/* ALC290 */
-- 
2.1.4