@@ -291,133 +291,11 @@ out:
return -EINVAL;
}
-static struct ir_raw_timings_manchester ir_rc6_timings[4] = {
- {
- .leader = RC6_PREFIX_PULSE,
- .pulse_space_start = 0,
- .clock = RC6_UNIT,
- .invert = 1,
- .trailer_space = RC6_PREFIX_SPACE,
- },
- {
- .clock = RC6_UNIT,
- .invert = 1,
- },
- {
- .clock = RC6_UNIT * 2,
- .invert = 1,
- },
- {
- .clock = RC6_UNIT,
- .invert = 1,
- .trailer_space = RC6_SUFFIX_SPACE,
- },
-};
-
-static int ir_rc6_validate_filter(const struct rc_scancode_filter *scancode,
- unsigned int important_bits)
-{
- /* all important bits of scancode should be set in mask */
- if (~scancode->mask & important_bits)
- return -EINVAL;
- /* extra bits in mask should be zero in data */
- if (scancode->mask & scancode->data & ~important_bits)
- return -EINVAL;
- return 0;
-}
-
-/**
- * ir_rc6_encode() - Encode a scancode as a stream of raw events
- *
- * @protocols: allowed protocols
- * @scancode: scancode filter describing scancode (helps distinguish between
- * protocol subtypes when scancode is ambiguous)
- * @events: array of raw ir events to write into
- * @max: maximum size of @events
- *
- * Returns: The number of events written.
- * -ENOBUFS if there isn't enough space in the array to fit the
- * encoding. In this case all @max events will have been written.
- * -EINVAL if the scancode is ambiguous or invalid.
- */
-static int ir_rc6_encode(u64 protocols,
- const struct rc_scancode_filter *scancode,
- struct ir_raw_event *events, unsigned int max)
-{
- int ret;
- struct ir_raw_event *e = events;
-
- if (protocols & RC_BIT_RC6_0 &&
- !ir_rc6_validate_filter(scancode, 0xffff)) {
-
- /* Modulate the preamble */
- ret = ir_raw_gen_manchester(&e, max, &ir_rc6_timings[0], 0, 0);
- if (ret < 0)
- return ret;
-
- /* Modulate the header (Start Bit & Mode-0) */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[1],
- RC6_HEADER_NBITS, (1 << 3));
- if (ret < 0)
- return ret;
-
- /* Modulate Trailer Bit */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[2], 1, 0);
- if (ret < 0)
- return ret;
-
- /* Modulate rest of the data */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[3], RC6_0_NBITS,
- scancode->data);
- if (ret < 0)
- return ret;
-
- } else if (protocols & (RC_BIT_RC6_6A_20 | RC_BIT_RC6_6A_24 |
- RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE) &&
- !ir_rc6_validate_filter(scancode, 0x8fffffff)) {
-
- /* Modulate the preamble */
- ret = ir_raw_gen_manchester(&e, max, &ir_rc6_timings[0], 0, 0);
- if (ret < 0)
- return ret;
-
- /* Modulate the header (Start Bit & Header-version 6 */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[1],
- RC6_HEADER_NBITS, (1 << 3 | 6));
- if (ret < 0)
- return ret;
-
- /* Modulate Trailer Bit */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[2], 1, 0);
- if (ret < 0)
- return ret;
-
- /* Modulate rest of the data */
- ret = ir_raw_gen_manchester(&e, max - (e - events),
- &ir_rc6_timings[3],
- fls(scancode->mask),
- scancode->data);
- if (ret < 0)
- return ret;
-
- } else {
- return -EINVAL;
- }
-
- return e - events;
-}
-
static struct ir_raw_handler rc6_handler = {
.protocols = RC_BIT_RC6_0 | RC_BIT_RC6_6A_20 |
RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 |
RC_BIT_RC6_MCE,
.decode = ir_rc6_decode,
- .encode = ir_rc6_encode,
};
static int __init ir_rc6_decode_init(void)
This reverts commit cf257e288ad3a134d4bb809c542a3ae6c87ddfa3. The current code is not mature enough, the API should allow a single protocol to be specified. Also, the current code contains heuristics that will depend on module load order. Signed-off-by: David Härdeman <david@hardeman.nu> --- drivers/media/rc/ir-rc6-decoder.c | 122 ------------------------------------- 1 file changed, 122 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html