[v14,1/3] drm/i2c: tda998x: Add support of a DT graph of ports
diff mbox

Message ID fb313682b8d14e16565fc317b7f5a249748c069f.1438076750.git.moinejf@free.fr
State New
Headers show

Commit Message

Jean-Francois Moine May 8, 2015, 8:18 a.m. UTC
Two kinds of ports may be declared in a DT graph of ports: video and audio.
This patch accepts the port value from a video port as an alternative
to the video-ports property.
It also accepts audio ports in the case the transmitter is not used as
a slave encoder.
The new file include/sound/tda998x.h prepares to the definition of
a tda998x CODEC.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
---
 .../devicetree/bindings/drm/i2c/tda998x.txt        | 51 ++++++++++++
 drivers/gpu/drm/i2c/tda998x_drv.c                  | 90 +++++++++++++++++++---
 include/sound/tda998x.h                            |  8 ++
 3 files changed, 140 insertions(+), 9 deletions(-)
 create mode 100644 include/sound/tda998x.h

Comments

Jyri Sarha Aug. 3, 2015, 2:56 p.m. UTC | #1
On 05/08/15 11:18, Jean-Francois Moine wrote:
> Two kinds of ports may be declared in a DT graph of ports: video and audio.
> This patch accepts the port value from a video port as an alternative
> to the video-ports property.
> It also accepts audio ports in the case the transmitter is not used as
> a slave encoder.
> The new file include/sound/tda998x.h prepares to the definition of
> a tda998x CODEC.
>
> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
> ---
>   .../devicetree/bindings/drm/i2c/tda998x.txt        | 51 ++++++++++++
>   drivers/gpu/drm/i2c/tda998x_drv.c                  | 90 +++++++++++++++++++---
>   include/sound/tda998x.h                            |  8 ++
>   3 files changed, 140 insertions(+), 9 deletions(-)
>   create mode 100644 include/sound/tda998x.h
>
> diff --git a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> index e9e4bce..35f6a80 100644
> --- a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> +++ b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> @@ -16,6 +16,35 @@ Optional properties:
>
>     - video-ports: 24 bits value which defines how the video controller
>   	output is wired to the TDA998x input - default: <0x230145>
> +	This property is not used when ports are defined.
> +
> +Optional nodes:
> +
> +  - port: up to three ports.
> +	The ports are defined according to [1].
> +
> +    Video port.
> +	There may be only one video port.
> +	This one must contain the following property:
> +
> +	- port-type: must be "rgb"
> +
> +	and may contain the optional property:
> +
> +	- reg: 24 bits value which defines how the video controller
> +		output is wired to the TDA998x input (video pins)
> +		When absent, the default value is <0x230145>.

Using reg property for something else than for address of some kind 
seems confusing to me. Should we just add an explicit property rgb mapping?

> +
> +    Audio ports.
> +	There may be one or two audio ports.
> +	These ones must contain the following properties:
> +
> +	- port-type: must be "i2s" or "spdif"
> +
> +	- reg: 8 bits value which defines how the audio controller
> +		output is wired to the TDA998x input (audio pins)
> +

Here I do not even understand what what the values 3 ad 4 stand for. 
Also when trying to make a device file following the above binding I get 
errors related the different widths of for the register property values 
(I do not have the exact error at hand right now), but that prevented me 
from using these patches when I last tried them.

Anyway having some clearly defined property that explicitly defines the 
audio pins would make more sense to me. Even if that is not possible due 
lack of proper documentation it would be better not add to the confusion 
by unusual usage of reg property.


Best regards,
Jyri

ps. Did you ever give my generic hdmi codec patch a try?

> +[1] Documentation/devicetree/bindings/graph.txt
>
>   Example:
>
> @@ -26,4 +55,26 @@ Example:
>   		interrupts = <27 2>;		/* falling edge */
>   		pinctrl-0 = <&pmx_camera>;
>   		pinctrl-names = "default";
> +
> +		port@230145 {
> +			port-type = "rgb";
> +			reg = <0x230145>;
> +			hdmi_0: endpoint {
> +				remote-endpoint = <&lcd0_0>;
> +			};
> +		};
> +		port@3 {			/* AP1 = I2S */
> +			port-type = "i2s";
> +			reg = <0x03>; explicit
> +			tda998x_i2s: endpoint {
> +				remote-endpoint = <&audio1_i2s>;
> +			};
> +		};
> +		port@4 {			 /* AP2 = S/PDIF */
> +			port-type = "spdif";
> +			reg = <0x04>;
> +			tda998x_spdif: endpoint {
> +				remote-endpoint = <&audio1_spdif1>;
> +			};
> +		};
>   	};
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index 424228b..0952eac 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -27,6 +27,7 @@
>   #include <drm/drm_edid.h>
>   #include <drm/drm_of.h>
>   #include <drm/i2c/tda998x.h>
> +#include <sound/tda998x.h>
>
>   #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
>
> @@ -47,6 +48,8 @@ struct tda998x_priv {
>   	wait_queue_head_t wq_edid;
>   	volatile int wq_edid_wait;
>   	struct drm_encoder *encoder;
> +
> +	struct tda998x_audio audio;
>   };
>
>   #define to_tda998x_priv(x)  ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv)
> @@ -774,6 +777,8 @@ static void tda998x_encoder_set_config(struct tda998x_priv *priv,
>   			    (p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0);
>
>   	priv->params = *p;
> +	priv->audio.port_types[0] = p->audio_format;
> +	priv->audio.ports[0] = p->audio_cfg;
>   } explicit
>
>   static void tda998x_encoder_dpms(struct tda998x_priv *priv, int mode)
> @@ -1230,9 +1235,57 @@ static struct drm_encoder_slave_funcs tda998x_encoder_slave_funcs = {
>
>   /* I2C driver functions */
>
> +static int tda998x_parse_ports(struct tda998x_priv *priv,
> +				struct device_node *np)
> +{
> +	struct device_node *of_port;
> +	const char *port_type;
> +	int ret, audio_index, reg, afmt;
> +
> +	audio_index = 0;
> +	for_each_child_of_node(np, of_port) {
> +		if (!of_port->name
> +		 || of_node_cmp(of_port->name, "port") != 0)
> +			continue;
> +		ret = of_property_read_string(of_port, "port-type",
> +					&port_type);
> +		if (ret < 0)
> +			continue;
> +		ret = of_property_read_u32(of_port, "reg", &reg);
> +		if (strcmp(port_type, "rgb") == 0) {
> +			if (!ret) {		/* video reg is optional */
> +				priv->vip_cntrl_0 = reg >> 16;
> +				priv->vip_cntrl_1 = reg >> 8;
> +				priv->vip_cntrl_2 = reg;
> +			}
> +			continue;
> +		}
> +		if (strcmp(port_type, "i2s") == 0)
> +			afmt = AFMT_I2S;
> +		else if (strcmp(port_type, "spdif") == 0)
> +			afmt = AFMT_SPDIF;
> +		else
> +			continue;
> +		if (ret < 0) {
> +			dev_err(&priv->hdmi->dev, "missing reg for %s\n",
> +				port_type);
> +			return ret;
> +		}
> +		if (audio_index >= ARRAY_SIZE(priv->audio.ports)) {
> +			dev_err(&priv->hdmi->dev, "too many audio ports\n");
> +			break;
> +		}
> +		priv->audio.ports[audio_index] = reg;
> +		priv->audio.port_types[audio_index] = afmt;
> +		audio_index++;
> +	}
> +	return 0;
> +}
> +
>   static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
>   {
>   	struct device_node *np = client->dev.of_node;
> +	struct device_node *of_port;
>   	u32 video;
>   	int rev_lo, rev_hi, ret;
>   	unsigned short cec_addr;
> @@ -1337,15 +1390,34 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
>   	/* enable EDID read irq: */
>   	reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
>
> -	if (!np)
> -		return 0;		/* non-DT */
> -
> -	/* get the optional video properties */
> -	ret = of_property_read_u32(np, "video-ports", &video);
> -	if (ret == 0) {
> -		priv->vip_cntrl_0 = video >> 16;
> -		priv->vip_cntrl_1 = video >> 8;
> -		priv->vip_cntrl_2 = video;
> +	/* get the device tree parameters */
> +	if (np) {
> +		of_port = of_get_child_by_name(np, "port");
> +		if (of_port) {				/* graph of ports */
> +			of_node_put(of_port);
> +			ret = tda998x_parse_ports(priv, np);
> +			if (ret < 0)
> +				goto fail;
> +
> +			/* initialize the default audio configuration */
> +			if (priv->audio.ports[0]) {
> +				priv->params.audio_cfg = priv->audio.ports[0];
> +				priv->params.audio_format =
> +						priv->audio.port_types[0];
> +				priv->params.audio_clk_cfg =
> +					priv->params.audio_format == explicit
> +							AFMT_SPDIF ? 0 : 1;
> +			}
> +		} else {
> +
> +			/* optional video properties */
> +			ret = of_property_read_u32(np, "video-ports", &video);
> +			if (ret == 0) {
> +				priv->vip_cntrl_0 = video >> 16;
> +				priv->vip_cntrl_1 = video >> 8;
> +				priv->vip_cntrl_2 = video;
> +			}
> +		}
>   	}
>
>   	return 0;
> diff --git a/include/sound/tda998x.h b/include/sound/tda998x.h
> new file mode 100644
> index 0000000..bef1da7
> --- /dev/null
> +++ b/include/sound/tda998x.h
> @@ -0,0 +1,8 @@
> +#ifndef SND_TDA998X_H
> +#define SND_TDA998X_H
> +
> +struct tda998x_audio {
> +	u8 ports[2];			/* AP value */
> +	u8 port_types[2];		/* AFMT_xxx */
> +};
> +#endif
>
Jean-Francois Moine Aug. 3, 2015, 5:40 p.m. UTC | #2
On Mon, 3 Aug 2015 17:56:17 +0300
Jyri Sarha <jsarha@ti.com> wrote:

> On 05/08/15 11:18, Jean-Francois Moine wrote:
> > Two kinds of ports may be declared in a DT graph of ports: video and audio.
> > This patch accepts the port value from a video port as an alternative
> > to the video-ports property.
> > It also accepts audio ports in the case the transmitter is not used as
> > a slave encoder.
> > The new file include/sound/tda998x.h prepares to the definition of
> > a tda998x CODEC.
> >
> > Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
> > ---
> >   .../devicetree/bindings/drm/i2c/tda998x.txt        | 51 ++++++++++++
> >   drivers/gpu/drm/i2c/tda998x_drv.c                  | 90 +++++++++++++++++++---
> >   include/sound/tda998x.h                            |  8 ++
> >   3 files changed, 140 insertions(+), 9 deletions(-)
> >   create mode 100644 include/sound/tda998x.h
> >
> > diff --git a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> > index e9e4bce..35f6a80 100644
> > --- a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> > +++ b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> > @@ -16,6 +16,35 @@ Optional properties:
> >
> >     - video-ports: 24 bits value which defines how the video controller
> >   	output is wired to the TDA998x input - default: <0x230145>
> > +	This property is not used when ports are defined.
> > +
> > +Optional nodes:
> > +
> > +  - port: up to three ports.
> > +	The ports are defined according to [1].
> > +
> > +    Video port.
> > +	There may be only one video port.
> > +	This one must contain the following property:
> > +
> > +	- port-type: must be "rgb"
> > +
> > +	and may contain the optional property:
> > +
> > +	- reg: 24 bits value which defines how the video controller
> > +		output is wired to the TDA998x input (video pins)
> > +		When absent, the default value is <0x230145>.
> 
> Using reg property for something else than for address of some kind 
> seems confusing to me. Should we just add an explicit property rgb mapping?

Indeed, there could be an attribute as 'port-value'.

> > +
> > +    Audio ports.
> > +	There may be one or two audio ports.
> > +	These ones must contain the following properties:
> > +
> > +	- port-type: must be "i2s" or "spdif"
> > +
> > +	- reg: 8 bits value which defines how the audio controller
> > +		output is wired to the TDA998x input (audio pins)
> > +
> 
> Here I do not even understand what what the values 3 ad 4 stand for. 

These values come from the TDA19988 documentation (the TDA9988 and
TDA9989 have the same video and audio input registers).
- 0x03 is WS (Word Select - bit 0) = 1 (I2S) and AP (Audio Pin) = 1 (bit 1)
- 0x04 is WS = 0 (S/PDIF) and AP = 2 (bit 2)

> Also when trying to make a device file following the above binding I get 
> errors related the different widths of for the register property values 
> (I do not have the exact error at hand right now), but that prevented me 
> from using these patches when I last tried them.

Strange. I have no error.

> Anyway having some clearly defined property that explicitly defines the 
> audio pins would make more sense to me. Even if that is not possible due 
> lack of proper documentation it would be better not add to the confusion 
> by unusual usage of reg property.

I don't remember from where I got the TDA19988 documentation, but,
anyway, the port values are the same as the ones found in the first
kernel provided by the Cubox manufacturer.

> Best regards,
> Jyri
> 
> ps. Did you ever give my generic hdmi codec patch a try?

No, because I don't need a so complex codec. Mine has no codec device,
no private data, no clock, and it is less than 150 lines of code.
Also, as my machine is now obsolete, I will stop any development for it
and keep the kernel I have and which works fine enough for me.

Best regards.
Russell King - ARM Linux Aug. 3, 2015, 6:06 p.m. UTC | #3
On Mon, Aug 03, 2015 at 05:56:17PM +0300, Jyri Sarha wrote:
> On 05/08/15 11:18, Jean-Francois Moine wrote:
> >Two kinds of ports may be declared in a DT graph of ports: video and audio.
> >This patch accepts the port value from a video port as an alternative
> >to the video-ports property.
> >It also accepts audio ports in the case the transmitter is not used as
> >a slave encoder.
> >The new file include/sound/tda998x.h prepares to the definition of
> >a tda998x CODEC.
> >
> >Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
> >---
> >  .../devicetree/bindings/drm/i2c/tda998x.txt        | 51 ++++++++++++
> >  drivers/gpu/drm/i2c/tda998x_drv.c                  | 90 +++++++++++++++++++---
> >  include/sound/tda998x.h                            |  8 ++
> >  3 files changed, 140 insertions(+), 9 deletions(-)
> >  create mode 100644 include/sound/tda998x.h
> >
> >diff --git a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> >index e9e4bce..35f6a80 100644
> >--- a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> >+++ b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
> >@@ -16,6 +16,35 @@ Optional properties:
> >
> >    - video-ports: 24 bits value which defines how the video controller
> >  	output is wired to the TDA998x input - default: <0x230145>
> >+	This property is not used when ports are defined.
> >+
> >+Optional nodes:
> >+
> >+  - port: up to three ports.
> >+	The ports are defined according to [1].
> >+
> >+    Video port.
> >+	There may be only one video port.
> >+	This one must contain the following property:
> >+
> >+	- port-type: must be "rgb"
> >+
> >+	and may contain the optional property:
> >+
> >+	- reg: 24 bits value which defines how the video controller
> >+		output is wired to the TDA998x input (video pins)
> >+		When absent, the default value is <0x230145>.
> 
> Using reg property for something else than for address of some kind seems
> confusing to me. Should we just add an explicit property rgb mapping?

It's what ePAPR requires.

The problem is when you have multiple nodes called the same thing, you
need to add the @number suffix to the name, and if you do that, ePAPR
says you must also have a reg property, where the reg property matches
the number given after the @.

See https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
page 15, 2.2.1 "Node names".

> Here I do not even understand what what the values 3 ad 4 stand for.

It's the audio input pin number (which is a sort-of bus address.)

> Anyway having some clearly defined property that explicitly defines the
> audio pins would make more sense to me. Even if that is not possible due
> lack of proper documentation it would be better not add to the confusion by
> unusual usage of reg property.

As ePAPR requires the reg= property with the @unit-address part, this is
the most sane approach.

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
index e9e4bce..35f6a80 100644
--- a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
+++ b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
@@ -16,6 +16,35 @@  Optional properties:
 
   - video-ports: 24 bits value which defines how the video controller
 	output is wired to the TDA998x input - default: <0x230145>
+	This property is not used when ports are defined.
+
+Optional nodes:
+
+  - port: up to three ports.
+	The ports are defined according to [1].
+
+    Video port.
+	There may be only one video port.
+	This one must contain the following property:
+
+	- port-type: must be "rgb"
+
+	and may contain the optional property:
+
+	- reg: 24 bits value which defines how the video controller
+		output is wired to the TDA998x input (video pins)
+		When absent, the default value is <0x230145>.
+
+    Audio ports.
+	There may be one or two audio ports.
+	These ones must contain the following properties:
+
+	- port-type: must be "i2s" or "spdif"
+
+	- reg: 8 bits value which defines how the audio controller
+		output is wired to the TDA998x input (audio pins)
+
+[1] Documentation/devicetree/bindings/graph.txt
 
 Example:
 
@@ -26,4 +55,26 @@  Example:
 		interrupts = <27 2>;		/* falling edge */
 		pinctrl-0 = <&pmx_camera>;
 		pinctrl-names = "default";
+
+		port@230145 {
+			port-type = "rgb";
+			reg = <0x230145>;
+			hdmi_0: endpoint {
+				remote-endpoint = <&lcd0_0>;
+			};
+		};
+		port@3 {			/* AP1 = I2S */
+			port-type = "i2s";
+			reg = <0x03>;
+			tda998x_i2s: endpoint {
+				remote-endpoint = <&audio1_i2s>;
+			};
+		};
+		port@4 {			 /* AP2 = S/PDIF */
+			port-type = "spdif";
+			reg = <0x04>;
+			tda998x_spdif: endpoint {
+				remote-endpoint = <&audio1_spdif1>;
+			};
+		};
 	};
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 424228b..0952eac 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -27,6 +27,7 @@ 
 #include <drm/drm_edid.h>
 #include <drm/drm_of.h>
 #include <drm/i2c/tda998x.h>
+#include <sound/tda998x.h>
 
 #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
 
@@ -47,6 +48,8 @@  struct tda998x_priv {
 	wait_queue_head_t wq_edid;
 	volatile int wq_edid_wait;
 	struct drm_encoder *encoder;
+
+	struct tda998x_audio audio;
 };
 
 #define to_tda998x_priv(x)  ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv)
@@ -774,6 +777,8 @@  static void tda998x_encoder_set_config(struct tda998x_priv *priv,
 			    (p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0);
 
 	priv->params = *p;
+	priv->audio.port_types[0] = p->audio_format;
+	priv->audio.ports[0] = p->audio_cfg;
 }
 
 static void tda998x_encoder_dpms(struct tda998x_priv *priv, int mode)
@@ -1230,9 +1235,57 @@  static struct drm_encoder_slave_funcs tda998x_encoder_slave_funcs = {
 
 /* I2C driver functions */
 
+static int tda998x_parse_ports(struct tda998x_priv *priv,
+				struct device_node *np)
+{
+	struct device_node *of_port;
+	const char *port_type;
+	int ret, audio_index, reg, afmt;
+
+	audio_index = 0;
+	for_each_child_of_node(np, of_port) {
+		if (!of_port->name
+		 || of_node_cmp(of_port->name, "port") != 0)
+			continue;
+		ret = of_property_read_string(of_port, "port-type",
+					&port_type);
+		if (ret < 0)
+			continue;
+		ret = of_property_read_u32(of_port, "reg", &reg);
+		if (strcmp(port_type, "rgb") == 0) {
+			if (!ret) {		/* video reg is optional */
+				priv->vip_cntrl_0 = reg >> 16;
+				priv->vip_cntrl_1 = reg >> 8;
+				priv->vip_cntrl_2 = reg;
+			}
+			continue;
+		}
+		if (strcmp(port_type, "i2s") == 0)
+			afmt = AFMT_I2S;
+		else if (strcmp(port_type, "spdif") == 0)
+			afmt = AFMT_SPDIF;
+		else
+			continue;
+		if (ret < 0) {
+			dev_err(&priv->hdmi->dev, "missing reg for %s\n",
+				port_type);
+			return ret;
+		}
+		if (audio_index >= ARRAY_SIZE(priv->audio.ports)) {
+			dev_err(&priv->hdmi->dev, "too many audio ports\n");
+			break;
+		}
+		priv->audio.ports[audio_index] = reg;
+		priv->audio.port_types[audio_index] = afmt;
+		audio_index++;
+	}
+	return 0;
+}
+
 static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 {
 	struct device_node *np = client->dev.of_node;
+	struct device_node *of_port;
 	u32 video;
 	int rev_lo, rev_hi, ret;
 	unsigned short cec_addr;
@@ -1337,15 +1390,34 @@  static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 	/* enable EDID read irq: */
 	reg_set(priv, REG_INT_FLAGS_2, INT_FLAGS_2_EDID_BLK_RD);
 
-	if (!np)
-		return 0;		/* non-DT */
-
-	/* get the optional video properties */
-	ret = of_property_read_u32(np, "video-ports", &video);
-	if (ret == 0) {
-		priv->vip_cntrl_0 = video >> 16;
-		priv->vip_cntrl_1 = video >> 8;
-		priv->vip_cntrl_2 = video;
+	/* get the device tree parameters */
+	if (np) {
+		of_port = of_get_child_by_name(np, "port");
+		if (of_port) {				/* graph of ports */
+			of_node_put(of_port);
+			ret = tda998x_parse_ports(priv, np);
+			if (ret < 0)
+				goto fail;
+
+			/* initialize the default audio configuration */
+			if (priv->audio.ports[0]) {
+				priv->params.audio_cfg = priv->audio.ports[0];
+				priv->params.audio_format =
+						priv->audio.port_types[0];
+				priv->params.audio_clk_cfg =
+					priv->params.audio_format ==
+							AFMT_SPDIF ? 0 : 1;
+			}
+		} else {
+
+			/* optional video properties */
+			ret = of_property_read_u32(np, "video-ports", &video);
+			if (ret == 0) {
+				priv->vip_cntrl_0 = video >> 16;
+				priv->vip_cntrl_1 = video >> 8;
+				priv->vip_cntrl_2 = video;
+			}
+		}
 	}
 
 	return 0;
diff --git a/include/sound/tda998x.h b/include/sound/tda998x.h
new file mode 100644
index 0000000..bef1da7
--- /dev/null
+++ b/include/sound/tda998x.h
@@ -0,0 +1,8 @@ 
+#ifndef SND_TDA998X_H
+#define SND_TDA998X_H
+
+struct tda998x_audio {
+	u8 ports[2];			/* AP value */
+	u8 port_types[2];		/* AFMT_xxx */
+};
+#endif