@@ -167,12 +167,12 @@ config INPUT_M68K_BEEP
depends on M68K
config INPUT_MAX77693_HAPTIC
- tristate "MAXIM MAX77693 haptic controller support"
- depends on MFD_MAX77693 && PWM
+ tristate "MAXIM MAX77693/MAX77843 haptic controller support"
+ depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
select INPUT_FF_MEMLESS
help
This option enables support for the haptic controller on
- MAXIM MAX77693 chip.
+ MAXIM MAX77693 and MAX77843 chips.
To compile this driver as module, choose M here: the
module will be called max77693-haptic.
@@ -1,8 +1,9 @@
/*
- * MAXIM MAX77693 Haptic device driver
+ * MAXIM MAX77693/MAX77843 Haptic device driver
*
- * Copyright (C) 2014 Samsung Electronics
+ * Copyright (C) 2014,2015 Samsung Electronics
* Jaewon Kim <jaewon02.kim@samsung.com>
+ * Krzysztof Kozlowski <k.kozlowski@samsung.com>
*
* This program is not provided / owned by Maxim Integrated Products.
*
@@ -26,6 +27,7 @@
#include <linux/mfd/max77693.h>
#include <linux/mfd/max77693-common.h>
#include <linux/mfd/max77693-private.h>
+#include <linux/mfd/max77843-private.h>
#define MAX_MAGNITUDE_SHIFT 16
@@ -80,6 +82,26 @@ static int max77693_haptic_set_duty_cycle(struct max77693_haptic *haptic)
return 0;
}
+static int max77843_haptic_bias(struct max77693_haptic *haptic, bool on)
+{
+ int error;
+
+ if (haptic->dev_type != TYPE_MAX77843)
+ return 0;
+
+ error = regmap_update_bits(haptic->regmap_haptic,
+ MAX77843_SYS_REG_MAINCTRL1,
+ MAX77843_MAINCTRL1_BIASEN_MASK,
+ on << MAINCTRL1_BIASEN_SHIFT);
+ if (error) {
+ dev_err(haptic->dev, "failed to %s bias: %d\n",
+ on ? "enable" : "disable", error);
+ return error;
+ }
+
+ return 0;
+}
+
static int max77693_haptic_configure(struct max77693_haptic *haptic,
bool enable)
{
@@ -94,6 +116,12 @@ static int max77693_haptic_configure(struct max77693_haptic *haptic,
MAX77693_HAPTIC_PWM_DIVISOR_128);
config_reg = MAX77693_HAPTIC_REG_CONFIG2;
break;
+ case TYPE_MAX77843:
+ value = (haptic->type << MCONFIG_MODE_SHIFT) |
+ (enable << MCONFIG_MEN_SHIFT) |
+ MAX77693_HAPTIC_PWM_DIVISOR_128;
+ config_reg = MAX77843_HAP_REG_MCONFIG;
+ break;
default:
return -EINVAL;
}
@@ -113,6 +141,9 @@ static int max77693_haptic_lowsys(struct max77693_haptic *haptic, bool enable)
{
int error;
+ if (haptic->dev_type != TYPE_MAX77693)
+ return 0;
+
error = regmap_update_bits(haptic->regmap_pmic,
MAX77693_PMIC_REG_LSCNFG,
MAX77693_PMIC_LOW_SYS_MASK,
@@ -228,6 +259,10 @@ static int max77693_haptic_open(struct input_dev *dev)
struct max77693_haptic *haptic = input_get_drvdata(dev);
int error;
+ error = max77843_haptic_bias(haptic, true);
+ if (error)
+ return error;
+
error = regulator_enable(haptic->motor_reg);
if (error) {
dev_err(haptic->dev,
@@ -250,6 +285,8 @@ static void max77693_haptic_close(struct input_dev *dev)
if (error)
dev_err(haptic->dev,
"failed to disable regulator: %d\n", error);
+
+ max77843_haptic_bias(haptic, false);
}
static int max77693_haptic_probe(struct platform_device *pdev)
@@ -274,6 +311,9 @@ static int max77693_haptic_probe(struct platform_device *pdev)
case TYPE_MAX77693:
haptic->regmap_haptic = max77693->regmap_haptic;
break;
+ case TYPE_MAX77843:
+ haptic->regmap_haptic = max77693->regmap;
+ break;
default:
dev_err(&pdev->dev, "unsupported device type: %u\n",
haptic->dev_type);
@@ -359,6 +399,7 @@ static SIMPLE_DEV_PM_OPS(max77693_haptic_pm_ops,
static const struct platform_device_id max77693_haptic_id[] = {
{ "max77693-haptic", TYPE_MAX77693 },
+ { "max77843-haptic", TYPE_MAX77843 },
{},
};
MODULE_DEVICE_TABLE(platform, max77693_haptic_id);
@@ -374,6 +415,7 @@ static struct platform_driver max77693_haptic_driver = {
module_platform_driver(max77693_haptic_driver);
MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
-MODULE_DESCRIPTION("MAXIM MAX77693 Haptic driver");
+MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_DESCRIPTION("MAXIM 77693/77843 Haptic driver");
MODULE_ALIAS("platform:max77693-haptic");
MODULE_LICENSE("GPL");
The Maxim 77843 haptic driver differs from 77693 by: 1. Setting the bias. 2. Different configuration register. 3. Not enabling the low-sys DAC. 4. Using same regmap for PMIC and haptic blocks. Incorporate all differences into max77693 haptic driver so both devices can be supported. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> --- drivers/input/misc/Kconfig | 6 ++--- drivers/input/misc/max77693-haptic.c | 48 +++++++++++++++++++++++++++++++++--- 2 files changed, 48 insertions(+), 6 deletions(-)