@@ -34,6 +34,9 @@
#define EN_FEW_WAIT_VAL (0x8 << 16)
#define CLK_DIS_WAIT_VAL (0x2 << 12)
+#define RETAIN_MEM BIT(14)
+#define RETAIN_PERIPH BIT(13)
+
#define TIMEOUT_US 100
#define domain_to_gdsc(domain) container_of(domain, struct gdsc, pd)
@@ -81,6 +84,24 @@ static int gdsc_toggle_logic(struct gdsc *sc, bool en)
return -ETIMEDOUT;
}
+static inline void gdsc_force_mem_on(struct gdsc *sc)
+{
+ int i;
+ u32 mask = RETAIN_MEM | RETAIN_PERIPH;
+
+ for (i = 0; i < sc->cxc_count; i++)
+ regmap_update_bits(sc->regmap, sc->cxcs[i], mask, mask);
+}
+
+static inline void gdsc_clear_mem_on(struct gdsc *sc)
+{
+ int i;
+ u32 mask = RETAIN_MEM | RETAIN_PERIPH;
+
+ for (i = 0; i < sc->cxc_count; i++)
+ regmap_update_bits(sc->regmap, sc->cxcs[i], mask, 0);
+}
+
static int gdsc_enable(struct generic_pm_domain *domain)
{
struct gdsc *sc = domain_to_gdsc(domain);
@@ -89,6 +110,10 @@ static int gdsc_enable(struct generic_pm_domain *domain)
ret = gdsc_toggle_logic(sc, true);
if (ret)
return ret;
+
+ if (sc->pwrsts & PWRSTS_OFF)
+ gdsc_force_mem_on(sc);
+
/*
* If clocks to this power domain were already on, they will take an
* additional 4 clock cycles to re-enable after the power domain is
@@ -105,6 +130,9 @@ static int gdsc_disable(struct generic_pm_domain *domain)
{
struct gdsc *sc = domain_to_gdsc(domain);
+ if (sc->pwrsts & PWRSTS_OFF)
+ gdsc_clear_mem_on(sc);
+
return gdsc_toggle_logic(sc, false);
}
@@ -129,6 +157,11 @@ static int gdsc_init(struct gdsc *sc)
if (on < 0)
return on;
+ if (on || (sc->pwrsts & PWRSTS_RET))
+ gdsc_force_mem_on(sc);
+ else
+ gdsc_clear_mem_on(sc);
+
sc->pd.power_off = gdsc_disable;
sc->pd.power_on = gdsc_enable;
pm_genpd_init(&sc->pd, NULL, !on);
@@ -19,16 +19,29 @@
struct regmap;
+/* Powerdomain allowable state bitfields */
+#define PWRSTS_OFF BIT(0)
+#define PWRSTS_RET BIT(1)
+#define PWRSTS_ON BIT(2)
+#define PWRSTS_OFF_ON (PWRSTS_OFF | PWRSTS_ON)
+#define PWRSTS_RET_ON (PWRSTS_RET | PWRSTS_ON)
+
/**
* struct gdsc - Globally Distributed Switch Controller
* @pd: generic power domain
* @regmap: regmap for MMIO accesses
* @gdscr: gsdc control register
+ * @cxcs: offsets of branch registers to toggle mem/periph bits in
+ * @cxc_count: number of @cxcs
+ * @pwrsts: Possible powerdomain power states
*/
struct gdsc {
struct generic_pm_domain pd;
struct regmap *regmap;
unsigned int gdscr;
+ unsigned int *cxcs;
+ unsigned int cxc_count;
+ const u8 pwrsts;
};
#ifdef CONFIG_QCOM_GDSC
Along with the GDSC power switch, there is additional control to either retain all memory (core and peripheral) within a given powerdomain or to turn them off while the GDSC is powered down. Add support for these by modelling a RET state where all memory is retained and an OFF state where all memory gets turned off. The controls provided are granular enough to be able to support various differnt levels of RET states, like a 'shallow RET' with all memory retained and a 'deep RET' with some memory retained while some others are lost. The current patch does not support this and considers just one RET state where all memory is retained. Futher work, if needed can support multiple different levels of RET state. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- drivers/clk/qcom/gdsc.c | 33 +++++++++++++++++++++++++++++++++ drivers/clk/qcom/gdsc.h | 13 +++++++++++++ 2 files changed, 46 insertions(+)