| Message ID | 1439658915-2511-2-git-send-email-prladdha@cisco.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello Hans, Please ignore this patch. I am resending this patch along with a patch adding the reduced fps support in vivid capture. Regards, Prashant On 15/08/15 10:45 pm, "Prashant Laddha (prladdha)" <prladdha@cisco.com> wrote: >If bt timing has REDUCED_FPS flag set, then reduce the frame rate >by factor of 1000 / 1001. For vivid, timeperframe_vid_out indicates >the frame timings used by video out thread. The timeperframe_vid_out >is derived from pixel clock. Adjusting the timeperframe_vid_out by >scaling down pixel clock with factor of 1000 / 1001. > >The reduced fps is supported for CVT timings if reduced blanking v2 >(indicated by vsync = 8) is true. For CEA861 timings, reduced fps is >supported if V4L2_DV_FL_CAN_REDUCE_FPS flag is true. For GTF timings, >reduced fps is not supported. > >The reduced fps will allow refresh rates like 29.97, 59.94 etc. > >Cc: Hans Verkuil <hans.verkuil@cisco.com> >Signed-off-by: Prashant Laddha <prladdha@cisco.com> >--- > drivers/media/platform/vivid/vivid-vid-out.c | 30 >+++++++++++++++++++++++++++- > drivers/media/v4l2-core/v4l2-dv-timings.c | 5 +++++ > 2 files changed, 34 insertions(+), 1 deletion(-) > >diff --git a/drivers/media/platform/vivid/vivid-vid-out.c >b/drivers/media/platform/vivid/vivid-vid-out.c >index c404e27..ca6ec78 100644 >--- a/drivers/media/platform/vivid/vivid-vid-out.c >+++ b/drivers/media/platform/vivid/vivid-vid-out.c >@@ -213,6 +213,27 @@ const struct vb2_ops vivid_vid_out_qops = { > }; > > /* >+ * Called to check conditions for reduced fps. For CVT timings, reduced >+ * fps is allowed only with reduced blanking v2 (vsync == 8). For CEA861 >+ * timings, reduced fps is allowed if V4L2_DV_FL_CAN_REDUCE_FPS flag is >+ * true. >+ */ >+static bool reduce_fps(struct v4l2_bt_timings *bt) >+{ >+ if (!(bt->flags & V4L2_DV_FL_REDUCED_FPS)) >+ return false; >+ >+ if ((bt->standards & V4L2_DV_BT_STD_CVT) && (bt->vsync == 8)) >+ return true; >+ >+ if ((bt->standards & V4L2_DV_BT_STD_CEA861) && >+ (bt->flags & V4L2_DV_FL_CAN_REDUCE_FPS)) >+ return true; >+ >+ return false; >+} >+ >+/* > * Called whenever the format has to be reset which can occur when > * changing outputs, standard, timings, etc. > */ >@@ -220,6 +241,7 @@ void vivid_update_format_out(struct vivid_dev *dev) > { > struct v4l2_bt_timings *bt = &dev->dv_timings_out.bt; > unsigned size, p; >+ u64 pixelclock; > > switch (dev->output_type[dev->output]) { > case SVID: >@@ -241,8 +263,14 @@ void vivid_update_format_out(struct vivid_dev *dev) > dev->sink_rect.width = bt->width; > dev->sink_rect.height = bt->height; > size = V4L2_DV_BT_FRAME_WIDTH(bt) * V4L2_DV_BT_FRAME_HEIGHT(bt); >+ >+ if (reduce_fps(bt)) >+ pixelclock = div_u64((bt->pixelclock * 1000), 1001); >+ else >+ pixelclock = bt->pixelclock; >+ > dev->timeperframe_vid_out = (struct v4l2_fract) { >- size / 100, (u32)bt->pixelclock / 100 >+ size / 100, (u32)pixelclock / 100 > }; > if (bt->interlaced) > dev->field_out = V4L2_FIELD_ALTERNATE; >diff --git a/drivers/media/v4l2-core/v4l2-dv-timings.c >b/drivers/media/v4l2-core/v4l2-dv-timings.c >index 6a83d61..adc03bd 100644 >--- a/drivers/media/v4l2-core/v4l2-dv-timings.c >+++ b/drivers/media/v4l2-core/v4l2-dv-timings.c >@@ -210,7 +210,12 @@ bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings >*t, > fnc, fnc_handle) && > v4l2_match_dv_timings(t, v4l2_dv_timings_presets + i, > pclock_delta)) { >+ u32 flags = t->bt.flags & V4L2_DV_FL_REDUCED_FPS; >+ > *t = v4l2_dv_timings_presets[i]; >+ if (t->bt.flags & V4L2_DV_FL_CAN_REDUCE_FPS) >+ t->bt.flags |= flags; >+ > return true; > } > } >-- >1.9.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/media/platform/vivid/vivid-vid-out.c b/drivers/media/platform/vivid/vivid-vid-out.c index c404e27..ca6ec78 100644 --- a/drivers/media/platform/vivid/vivid-vid-out.c +++ b/drivers/media/platform/vivid/vivid-vid-out.c @@ -213,6 +213,27 @@ const struct vb2_ops vivid_vid_out_qops = { }; /* + * Called to check conditions for reduced fps. For CVT timings, reduced + * fps is allowed only with reduced blanking v2 (vsync == 8). For CEA861 + * timings, reduced fps is allowed if V4L2_DV_FL_CAN_REDUCE_FPS flag is + * true. + */ +static bool reduce_fps(struct v4l2_bt_timings *bt) +{ + if (!(bt->flags & V4L2_DV_FL_REDUCED_FPS)) + return false; + + if ((bt->standards & V4L2_DV_BT_STD_CVT) && (bt->vsync == 8)) + return true; + + if ((bt->standards & V4L2_DV_BT_STD_CEA861) && + (bt->flags & V4L2_DV_FL_CAN_REDUCE_FPS)) + return true; + + return false; +} + +/* * Called whenever the format has to be reset which can occur when * changing outputs, standard, timings, etc. */ @@ -220,6 +241,7 @@ void vivid_update_format_out(struct vivid_dev *dev) { struct v4l2_bt_timings *bt = &dev->dv_timings_out.bt; unsigned size, p; + u64 pixelclock; switch (dev->output_type[dev->output]) { case SVID: @@ -241,8 +263,14 @@ void vivid_update_format_out(struct vivid_dev *dev) dev->sink_rect.width = bt->width; dev->sink_rect.height = bt->height; size = V4L2_DV_BT_FRAME_WIDTH(bt) * V4L2_DV_BT_FRAME_HEIGHT(bt); + + if (reduce_fps(bt)) + pixelclock = div_u64((bt->pixelclock * 1000), 1001); + else + pixelclock = bt->pixelclock; + dev->timeperframe_vid_out = (struct v4l2_fract) { - size / 100, (u32)bt->pixelclock / 100 + size / 100, (u32)pixelclock / 100 }; if (bt->interlaced) dev->field_out = V4L2_FIELD_ALTERNATE; diff --git a/drivers/media/v4l2-core/v4l2-dv-timings.c b/drivers/media/v4l2-core/v4l2-dv-timings.c index 6a83d61..adc03bd 100644 --- a/drivers/media/v4l2-core/v4l2-dv-timings.c +++ b/drivers/media/v4l2-core/v4l2-dv-timings.c @@ -210,7 +210,12 @@ bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings *t, fnc, fnc_handle) && v4l2_match_dv_timings(t, v4l2_dv_timings_presets + i, pclock_delta)) { + u32 flags = t->bt.flags & V4L2_DV_FL_REDUCED_FPS; + *t = v4l2_dv_timings_presets[i]; + if (t->bt.flags & V4L2_DV_FL_CAN_REDUCE_FPS) + t->bt.flags |= flags; + return true; } }
If bt timing has REDUCED_FPS flag set, then reduce the frame rate by factor of 1000 / 1001. For vivid, timeperframe_vid_out indicates the frame timings used by video out thread. The timeperframe_vid_out is derived from pixel clock. Adjusting the timeperframe_vid_out by scaling down pixel clock with factor of 1000 / 1001. The reduced fps is supported for CVT timings if reduced blanking v2 (indicated by vsync = 8) is true. For CEA861 timings, reduced fps is supported if V4L2_DV_FL_CAN_REDUCE_FPS flag is true. For GTF timings, reduced fps is not supported. The reduced fps will allow refresh rates like 29.97, 59.94 etc. Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Prashant Laddha <prladdha@cisco.com> --- drivers/media/platform/vivid/vivid-vid-out.c | 30 +++++++++++++++++++++++++++- drivers/media/v4l2-core/v4l2-dv-timings.c | 5 +++++ 2 files changed, 34 insertions(+), 1 deletion(-)