Message ID | 1440422484-4737-11-git-send-email-rogerq@ti.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Mon, Aug 24, 2015 at 04:21:21PM +0300, Roger Quadros wrote: > The existing usb_add/remove_hcd() functionality > remains unchanged for non-OTG devices. For OTG > devices they only register the HCD with the OTG core. > > Introduce usb_otg_add/remove_hcd() for use by OTG core. > These functions actually add/remove the HCD. > > Signed-off-by: Roger Quadros <rogerq@ti.com> > --- > drivers/usb/core/hcd.c | 55 +++++++++++++++++++++++++++++++++++++++++++++----- > 1 file changed, 50 insertions(+), 5 deletions(-) > > diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c > index c0fd1f6..4851682 100644 > --- a/drivers/usb/core/hcd.c > +++ b/drivers/usb/core/hcd.c > @@ -46,6 +46,7 @@ > #include <linux/usb.h> > #include <linux/usb/hcd.h> > #include <linux/usb/phy.h> > +#include <linux/usb/otg.h> > > #include "usb.h" > > @@ -2625,8 +2626,8 @@ static void usb_put_invalidate_rhdev(struct usb_hcd *hcd) > * buffers of consistent memory, register the bus, request the IRQ line, > * and call the driver's reset() and start() routines. > */ > -int usb_add_hcd(struct usb_hcd *hcd, > - unsigned int irqnum, unsigned long irqflags) > +static int usb_otg_add_hcd(struct usb_hcd *hcd, > + unsigned int irqnum, unsigned long irqflags) You may change the kernel doc to this name too. > { > int retval; > struct usb_device *rhdev; > @@ -2839,17 +2840,16 @@ err_phy: > } > return retval; > } > -EXPORT_SYMBOL_GPL(usb_add_hcd); > > /** > - * usb_remove_hcd - shutdown processing for generic HCDs > + * usb_otg_remove_hcd - shutdown processing for generic HCDs > * @hcd: the usb_hcd structure to remove > * Context: !in_interrupt() > * > * Disconnects the root hub, then reverses the effects of usb_add_hcd(), > * invoking the HCD's stop() method. > */ > -void usb_remove_hcd(struct usb_hcd *hcd) > +static void usb_otg_remove_hcd(struct usb_hcd *hcd) > { > struct usb_device *rhdev = hcd->self.root_hub; > > @@ -2923,6 +2923,51 @@ void usb_remove_hcd(struct usb_hcd *hcd) > > usb_put_invalidate_rhdev(hcd); > } > + > +static struct otg_hcd_ops otg_hcd_intf = { > + .add = usb_otg_add_hcd, > + .remove = usb_otg_remove_hcd, > +}; > + > +/** > + * usb_add_hcd - finish generic HCD structure initialization and register > + * @hcd: the usb_hcd structure to initialize > + * @irqnum: Interrupt line to allocate > + * @irqflags: Interrupt type flags > + * > + * Finish the remaining parts of generic HCD initialization: allocate the > + * buffers of consistent memory, register the bus, request the IRQ line, > + * and call the driver's reset() and start() routines. > + * If it is an OTG device then it only registers the HCD with OTG core. > + * > + */ > +int usb_add_hcd(struct usb_hcd *hcd, > + unsigned int irqnum, unsigned long irqflags) > +{ > + /* If OTG device, OTG core takes care of adding HCD */ > + if (usb_otg_register_hcd(hcd, irqnum, irqflags, &otg_hcd_intf)) > + return usb_otg_add_hcd(hcd, irqnum, irqflags); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(usb_add_hcd); > + > +/** > + * usb_remove_hcd - shutdown processing for generic HCDs > + * @hcd: the usb_hcd structure to remove > + * Context: !in_interrupt() > + * > + * Disconnects the root hub, then reverses the effects of usb_add_hcd(), > + * invoking the HCD's stop() method. > + * If it is an OTG device then it unregisters the HCD from OTG core > + * as well. > + */ > +void usb_remove_hcd(struct usb_hcd *hcd) > +{ > + /* If OTG device, OTG core takes care of stopping HCD */ > + if (usb_otg_unregister_hcd(hcd)) > + usb_otg_remove_hcd(hcd); > +} > EXPORT_SYMBOL_GPL(usb_remove_hcd); > > void > -- > 2.1.4 >
On 09/09/15 05:23, Peter Chen wrote: > On Mon, Aug 24, 2015 at 04:21:21PM +0300, Roger Quadros wrote: >> The existing usb_add/remove_hcd() functionality >> remains unchanged for non-OTG devices. For OTG >> devices they only register the HCD with the OTG core. >> >> Introduce usb_otg_add/remove_hcd() for use by OTG core. >> These functions actually add/remove the HCD. >> >> Signed-off-by: Roger Quadros <rogerq@ti.com> >> --- >> drivers/usb/core/hcd.c | 55 +++++++++++++++++++++++++++++++++++++++++++++----- >> 1 file changed, 50 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c >> index c0fd1f6..4851682 100644 >> --- a/drivers/usb/core/hcd.c >> +++ b/drivers/usb/core/hcd.c >> @@ -46,6 +46,7 @@ >> #include <linux/usb.h> >> #include <linux/usb/hcd.h> >> #include <linux/usb/phy.h> >> +#include <linux/usb/otg.h> >> >> #include "usb.h" >> >> @@ -2625,8 +2626,8 @@ static void usb_put_invalidate_rhdev(struct usb_hcd *hcd) >> * buffers of consistent memory, register the bus, request the IRQ line, >> * and call the driver's reset() and start() routines. >> */ >> -int usb_add_hcd(struct usb_hcd *hcd, >> - unsigned int irqnum, unsigned long irqflags) >> +static int usb_otg_add_hcd(struct usb_hcd *hcd, >> + unsigned int irqnum, unsigned long irqflags) > > You may change the kernel doc to this name too. Yes. > >> { >> int retval; >> struct usb_device *rhdev; >> @@ -2839,17 +2840,16 @@ err_phy: >> } >> return retval; >> } >> -EXPORT_SYMBOL_GPL(usb_add_hcd); >> >> /** >> - * usb_remove_hcd - shutdown processing for generic HCDs >> + * usb_otg_remove_hcd - shutdown processing for generic HCDs >> * @hcd: the usb_hcd structure to remove >> * Context: !in_interrupt() >> * >> * Disconnects the root hub, then reverses the effects of usb_add_hcd(), >> * invoking the HCD's stop() method. >> */ >> -void usb_remove_hcd(struct usb_hcd *hcd) >> +static void usb_otg_remove_hcd(struct usb_hcd *hcd) >> { >> struct usb_device *rhdev = hcd->self.root_hub; >> >> @@ -2923,6 +2923,51 @@ void usb_remove_hcd(struct usb_hcd *hcd) >> >> usb_put_invalidate_rhdev(hcd); >> } >> + >> +static struct otg_hcd_ops otg_hcd_intf = { >> + .add = usb_otg_add_hcd, >> + .remove = usb_otg_remove_hcd, >> +}; >> + >> +/** >> + * usb_add_hcd - finish generic HCD structure initialization and register >> + * @hcd: the usb_hcd structure to initialize >> + * @irqnum: Interrupt line to allocate >> + * @irqflags: Interrupt type flags >> + * >> + * Finish the remaining parts of generic HCD initialization: allocate the >> + * buffers of consistent memory, register the bus, request the IRQ line, >> + * and call the driver's reset() and start() routines. >> + * If it is an OTG device then it only registers the HCD with OTG core. >> + * >> + */ >> +int usb_add_hcd(struct usb_hcd *hcd, >> + unsigned int irqnum, unsigned long irqflags) >> +{ >> + /* If OTG device, OTG core takes care of adding HCD */ >> + if (usb_otg_register_hcd(hcd, irqnum, irqflags, &otg_hcd_intf)) >> + return usb_otg_add_hcd(hcd, irqnum, irqflags); >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(usb_add_hcd); >> + >> +/** >> + * usb_remove_hcd - shutdown processing for generic HCDs >> + * @hcd: the usb_hcd structure to remove >> + * Context: !in_interrupt() >> + * >> + * Disconnects the root hub, then reverses the effects of usb_add_hcd(), >> + * invoking the HCD's stop() method. >> + * If it is an OTG device then it unregisters the HCD from OTG core >> + * as well. >> + */ >> +void usb_remove_hcd(struct usb_hcd *hcd) >> +{ >> + /* If OTG device, OTG core takes care of stopping HCD */ >> + if (usb_otg_unregister_hcd(hcd)) >> + usb_otg_remove_hcd(hcd); >> +} >> EXPORT_SYMBOL_GPL(usb_remove_hcd); >> >> void >> -- >> 2.1.4 >> > -- cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index c0fd1f6..4851682 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -46,6 +46,7 @@ #include <linux/usb.h> #include <linux/usb/hcd.h> #include <linux/usb/phy.h> +#include <linux/usb/otg.h> #include "usb.h" @@ -2625,8 +2626,8 @@ static void usb_put_invalidate_rhdev(struct usb_hcd *hcd) * buffers of consistent memory, register the bus, request the IRQ line, * and call the driver's reset() and start() routines. */ -int usb_add_hcd(struct usb_hcd *hcd, - unsigned int irqnum, unsigned long irqflags) +static int usb_otg_add_hcd(struct usb_hcd *hcd, + unsigned int irqnum, unsigned long irqflags) { int retval; struct usb_device *rhdev; @@ -2839,17 +2840,16 @@ err_phy: } return retval; } -EXPORT_SYMBOL_GPL(usb_add_hcd); /** - * usb_remove_hcd - shutdown processing for generic HCDs + * usb_otg_remove_hcd - shutdown processing for generic HCDs * @hcd: the usb_hcd structure to remove * Context: !in_interrupt() * * Disconnects the root hub, then reverses the effects of usb_add_hcd(), * invoking the HCD's stop() method. */ -void usb_remove_hcd(struct usb_hcd *hcd) +static void usb_otg_remove_hcd(struct usb_hcd *hcd) { struct usb_device *rhdev = hcd->self.root_hub; @@ -2923,6 +2923,51 @@ void usb_remove_hcd(struct usb_hcd *hcd) usb_put_invalidate_rhdev(hcd); } + +static struct otg_hcd_ops otg_hcd_intf = { + .add = usb_otg_add_hcd, + .remove = usb_otg_remove_hcd, +}; + +/** + * usb_add_hcd - finish generic HCD structure initialization and register + * @hcd: the usb_hcd structure to initialize + * @irqnum: Interrupt line to allocate + * @irqflags: Interrupt type flags + * + * Finish the remaining parts of generic HCD initialization: allocate the + * buffers of consistent memory, register the bus, request the IRQ line, + * and call the driver's reset() and start() routines. + * If it is an OTG device then it only registers the HCD with OTG core. + * + */ +int usb_add_hcd(struct usb_hcd *hcd, + unsigned int irqnum, unsigned long irqflags) +{ + /* If OTG device, OTG core takes care of adding HCD */ + if (usb_otg_register_hcd(hcd, irqnum, irqflags, &otg_hcd_intf)) + return usb_otg_add_hcd(hcd, irqnum, irqflags); + + return 0; +} +EXPORT_SYMBOL_GPL(usb_add_hcd); + +/** + * usb_remove_hcd - shutdown processing for generic HCDs + * @hcd: the usb_hcd structure to remove + * Context: !in_interrupt() + * + * Disconnects the root hub, then reverses the effects of usb_add_hcd(), + * invoking the HCD's stop() method. + * If it is an OTG device then it unregisters the HCD from OTG core + * as well. + */ +void usb_remove_hcd(struct usb_hcd *hcd) +{ + /* If OTG device, OTG core takes care of stopping HCD */ + if (usb_otg_unregister_hcd(hcd)) + usb_otg_remove_hcd(hcd); +} EXPORT_SYMBOL_GPL(usb_remove_hcd); void
The existing usb_add/remove_hcd() functionality remains unchanged for non-OTG devices. For OTG devices they only register the HCD with the OTG core. Introduce usb_otg_add/remove_hcd() for use by OTG core. These functions actually add/remove the HCD. Signed-off-by: Roger Quadros <rogerq@ti.com> --- drivers/usb/core/hcd.c | 55 +++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 50 insertions(+), 5 deletions(-)