[v2,1/3] ARM: dts: support Highspeed for rk3188-radxarock
diff mbox

Message ID 1442052050-20110-1-git-send-email-shawn.lin@rock-chips.com
State New
Headers show

Commit Message

Shawn Lin Sept. 12, 2015, 10 a.m. UTC
Add cap-sd-highspeed and cap-mmc-highspeed for rk3188-radxarock
board to make sd cards running faster.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

---

Changes in v2:
- Add mmc caps for individual board file

 arch/arm/boot/dts/rk3188-radxarock.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Heiko Stuebner Sept. 17, 2015, 9:55 p.m. UTC | #1
Hi Shawn,

Am Samstag, 12. September 2015, 18:00:50 schrieb Shawn Lin:
> Add cap-sd-highspeed and cap-mmc-highspeed for rk3188-radxarock
> board to make sd cards running faster.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

I've applied your patches to my dts-branch [0]. I did merge the two rk3066 
board changes into one patch, so there is now one for rk3188 and one for 3066.


[0] https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v4.4-armsoc/dts32

Patch
diff mbox

diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index d2180e5..2f37ea7 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -287,7 +287,8 @@ 
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
 	vmmc-supply = <&vcc_sd0>;
-
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
 	bus-width = <4>;
 	disable-wp;
 };