| Message ID | 1443311009-4811-3-git-send-email-m.smarduch@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Sep 26, 2015 at 04:43:29PM -0700, Mario Smarduch wrote: > This patch enhances current lazy vfp/simd hardware switch. In addition to > current lazy switch, it tracks vfp/simd hardware state with a vcpu > lazy flag. > > vcpu lazy flag is set on guest access and trap to vfp/simd hardware switch > handler. On vm-enter if lazy flag is set skip trap enable and saving > host fpexc. On vm-exit if flag is set skip hardware context switch > and return to host with guest context. > > On vcpu_put check if vcpu lazy flag is set, and execute a hardware context > switch to restore host. > > Signed-off-by: Mario Smarduch <m.smarduch@samsung.com> > --- > arch/arm/include/asm/kvm_asm.h | 1 + > arch/arm/kvm/arm.c | 17 ++++++++++++ > arch/arm/kvm/interrupts.S | 60 +++++++++++++++++++++++++++++++----------- > arch/arm/kvm/interrupts_head.S | 12 ++++++--- > 4 files changed, 71 insertions(+), 19 deletions(-) > > diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h > index 194c91b..4b45d79 100644 > --- a/arch/arm/include/asm/kvm_asm.h > +++ b/arch/arm/include/asm/kvm_asm.h > @@ -97,6 +97,7 @@ extern char __kvm_hyp_code_end[]; > extern void __kvm_flush_vm_context(void); > extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); > extern void __kvm_tlb_flush_vmid(struct kvm *kvm); > +extern void __kvm_restore_host_vfp_state(struct kvm_vcpu *vcpu); > > extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); > #endif > diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c > index ce404a5..79f49c7 100644 > --- a/arch/arm/kvm/arm.c > +++ b/arch/arm/kvm/arm.c > @@ -105,6 +105,20 @@ void kvm_arch_check_processor_compat(void *rtn) > *(int *)rtn = 0; > } > > +/** > + * kvm_switch_fp_regs() - switch guest/host VFP/SIMD registers > + * @vcpu: pointer to vcpu structure. > + * nit: stray blank line > + */ > +static void kvm_switch_fp_regs(struct kvm_vcpu *vcpu) > +{ > +#ifdef CONFIG_ARM > + if (vcpu->arch.vfp_lazy == 1) { > + kvm_call_hyp(__kvm_restore_host_vfp_state, vcpu); why do you have to do this in HYP mode ? > + vcpu->arch.vfp_lazy = 0; > + } > +#endif we've tried to put stuff like this in header files to avoid the ifdefs so far. Could that be done here as well? > +} > > /** > * kvm_arch_init_vm - initializes a VM data structure > @@ -295,6 +309,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) > > void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) > { > + /* Check if Guest accessed VFP registers */ misleading comment: this function does more than checking > + kvm_switch_fp_regs(vcpu); > + > /* > * The arch-generic KVM code expects the cpu field of a vcpu to be -1 > * if the vcpu is no longer assigned to a cpu. This is used for the > diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S > index 900ef6d..6d98232 100644 > --- a/arch/arm/kvm/interrupts.S > +++ b/arch/arm/kvm/interrupts.S > @@ -96,6 +96,29 @@ ENTRY(__kvm_flush_vm_context) > bx lr > ENDPROC(__kvm_flush_vm_context) > > +/** > + * void __kvm_restore_host_vfp_state(struct vcpu *vcpu) - Executes a lazy > + * fp/simd switch, saves the guest, restores host. > + * nit: stray blank line > + */ > +ENTRY(__kvm_restore_host_vfp_state) > +#ifdef CONFIG_VFPv3 > + push {r3-r7} > + > + add r7, r0, #VCPU_VFP_GUEST > + store_vfp_state r7 > + > + add r7, r0, #VCPU_VFP_HOST > + ldr r7, [r7] > + restore_vfp_state r7 > + > + ldr r3, [vcpu, #VCPU_VFP_FPEXC] either use r0 or vcpu throughout this function please > + VFPFMXR FPEXC, r3 > + > + pop {r3-r7} > +#endif > + bx lr > +ENDPROC(__kvm_restore_host_vfp_state) > > /******************************************************************** > * Hypervisor world-switch code > @@ -119,11 +142,15 @@ ENTRY(__kvm_vcpu_run) > @ If the host kernel has not been configured with VFPv3 support, > @ then it is safer if we deny guests from using it as well. > #ifdef CONFIG_VFPv3 > + @ r7 must be preserved until next vfp lazy check I don't understand this comment > + vfp_inlazy_mode r7, skip_save_host_fpexc > + > @ Set FPEXC_EN so the guest doesn't trap floating point instructions > VFPFMRX r2, FPEXC @ VMRS > - push {r2} > + str r2, [vcpu, #VCPU_VFP_FPEXC] > orr r2, r2, #FPEXC_EN > VFPFMXR FPEXC, r2 @ VMSR > +skip_save_host_fpexc: > #endif > > @ Configure Hyp-role > @@ -131,7 +158,14 @@ ENTRY(__kvm_vcpu_run) > > @ Trap coprocessor CRx accesses > set_hstr vmentry > - set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) > + set_hcptr vmentry, (HCPTR_TTA) > + > + @ check if vfp_lazy flag set > + cmp r7, #1 if you meant that you need to preserve r7 down to here, could you instead just move the VFP logic above down here and do the whole VFP logic in one coherent block? > + beq skip_guest_vfp_trap > + set_hcptr vmentry, (HCPTR_TCP(10) | HCPTR_TCP(11)) > +skip_guest_vfp_trap: > + > set_hdcr vmentry > > @ Write configured ID register into MIDR alias > @@ -170,22 +204,14 @@ __kvm_vcpu_return: > @ Don't trap coprocessor accesses for host kernel > set_hstr vmexit > set_hdcr vmexit > - set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore > + set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) > > #ifdef CONFIG_VFPv3 > - @ Switch VFP/NEON hardware state to the host's > - add r7, vcpu, #VCPU_VFP_GUEST > - store_vfp_state r7 > - add r7, vcpu, #VCPU_VFP_HOST > - ldr r7, [r7] > - restore_vfp_state r7 > - > -after_vfp_restore: > - @ Restore FPEXC_EN which we clobbered on entry > - pop {r2} > + vfp_inlazy_mode r2, skip_restore_host_fpexc > + @ If vfp_lazy is not set, restore FPEXC_EN which we clobbered on entry > + ldr r2, [vcpu, #VCPU_VFP_FPEXC] so we do this restore if, since we scheduled this VCPU thread, the guest has not touched any VFP regs, is that correct? Did you measure how often we schedule the guest and run it until we schedule another process without the guest touching any VFP regs? I'm just wondering if this complexity is worth it, or if we should just switch the VFP regs on vcpu_load/vcpu_put instead? Also, what do other architectures do here? > VFPFMXR FPEXC, r2 > -#else > -after_vfp_restore: > +skip_restore_host_fpexc: > #endif > > @ Reset Hyp-role > @@ -485,6 +511,10 @@ switch_to_guest_vfp: > @ NEON/VFP used. Turn on VFP access. > set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11)) > > + @ set lazy mode flag, switch hardware context on vcpu_put > + mov r1, #1 > + str r1, [vcpu, #VCPU_VFP_LAZY] > + > @ Switch VFP/NEON hardware state to the guest's > add r7, r0, #VCPU_VFP_HOST > ldr r7, [r7] > diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S > index 702740d..4561171 100644 > --- a/arch/arm/kvm/interrupts_head.S > +++ b/arch/arm/kvm/interrupts_head.S > @@ -594,7 +594,7 @@ ARM_BE8(rev r6, r6 ) > * If a label is specified with vmexit, it is branched to if VFP wasn't > * enabled. > */ > -.macro set_hcptr operation, mask, label = none > +.macro set_hcptr operation, mask > mrc p15, 4, r2, c1, c1, 2 > ldr r3, =\mask > .if \operation == vmentry > @@ -609,13 +609,17 @@ ARM_BE8(rev r6, r6 ) > beq 1f > .endif > isb > - .if \label != none > - b \label > - .endif > 1: > .endif > .endm > > +/* Checks if VFP/SIMD lazy flag is set, if it is branch to label. */ I don't easily understand the semantics of the lazy flag. When set, does it mean we've switched the hardware to the guest state? > +.macro vfp_inlazy_mode, reg, label > + ldr \reg, [vcpu, #VCPU_VFP_LAZY] > + cmp \reg, #1 > + beq \label > +.endm > + > /* Configures the HDCR (Hyp Debug Configuration Register) on entry/return > * (hardware reset value is 0) */ > .macro set_hdcr operation > -- > 1.9.1 > Thanks! -Christoffer -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/19/2015 3:14 AM, Christoffer Dall wrote: > On Sat, Sep 26, 2015 at 04:43:29PM -0700, Mario Smarduch wrote: >> This patch enhances current lazy vfp/simd hardware switch. In addition to >> current lazy switch, it tracks vfp/simd hardware state with a vcpu >> lazy flag. >> >> vcpu lazy flag is set on guest access and trap to vfp/simd hardware switch >> handler. On vm-enter if lazy flag is set skip trap enable and saving >> host fpexc. On vm-exit if flag is set skip hardware context switch >> and return to host with guest context. >> >> On vcpu_put check if vcpu lazy flag is set, and execute a hardware context >> switch to restore host. >> >> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com> >> --- >> arch/arm/include/asm/kvm_asm.h | 1 + >> arch/arm/kvm/arm.c | 17 ++++++++++++ >> arch/arm/kvm/interrupts.S | 60 +++++++++++++++++++++++++++++++----------- >> arch/arm/kvm/interrupts_head.S | 12 ++++++--- >> 4 files changed, 71 insertions(+), 19 deletions(-) >> >> diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h >> index 194c91b..4b45d79 100644 >> --- a/arch/arm/include/asm/kvm_asm.h >> +++ b/arch/arm/include/asm/kvm_asm.h >> @@ -97,6 +97,7 @@ extern char __kvm_hyp_code_end[]; >> extern void __kvm_flush_vm_context(void); >> extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); >> extern void __kvm_tlb_flush_vmid(struct kvm *kvm); >> +extern void __kvm_restore_host_vfp_state(struct kvm_vcpu *vcpu); >> >> extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); >> #endif >> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c >> index ce404a5..79f49c7 100644 >> --- a/arch/arm/kvm/arm.c >> +++ b/arch/arm/kvm/arm.c >> @@ -105,6 +105,20 @@ void kvm_arch_check_processor_compat(void *rtn) >> *(int *)rtn = 0; >> } >> >> +/** >> + * kvm_switch_fp_regs() - switch guest/host VFP/SIMD registers >> + * @vcpu: pointer to vcpu structure. >> + * > > nit: stray blank line ok > >> + */ >> +static void kvm_switch_fp_regs(struct kvm_vcpu *vcpu) >> +{ >> +#ifdef CONFIG_ARM >> + if (vcpu->arch.vfp_lazy == 1) { >> + kvm_call_hyp(__kvm_restore_host_vfp_state, vcpu); > > why do you have to do this in HYP mode ? Calling it directly works fine. I moved the function outside hyp start/end range in interrupts.S. Not thinking outside the box, just thought let them all be hyp calls. > >> + vcpu->arch.vfp_lazy = 0; >> + } >> +#endif > > we've tried to put stuff like this in header files to avoid the ifdefs > so far. Could that be done here as well? That was a to do, but didn't get around to it. > >> +} >> >> /** >> * kvm_arch_init_vm - initializes a VM data structure >> @@ -295,6 +309,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) >> >> void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) >> { >> + /* Check if Guest accessed VFP registers */ > > misleading comment: this function does more than checking Yep sure does, will change. > >> + kvm_switch_fp_regs(vcpu); >> + >> /* >> * The arch-generic KVM code expects the cpu field of a vcpu to be -1 >> * if the vcpu is no longer assigned to a cpu. This is used for the >> diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S >> index 900ef6d..6d98232 100644 >> --- a/arch/arm/kvm/interrupts.S >> +++ b/arch/arm/kvm/interrupts.S >> @@ -96,6 +96,29 @@ ENTRY(__kvm_flush_vm_context) >> bx lr >> ENDPROC(__kvm_flush_vm_context) >> >> +/** >> + * void __kvm_restore_host_vfp_state(struct vcpu *vcpu) - Executes a lazy >> + * fp/simd switch, saves the guest, restores host. >> + * > > nit: stray blank line ok. > >> + */ >> +ENTRY(__kvm_restore_host_vfp_state) >> +#ifdef CONFIG_VFPv3 >> + push {r3-r7} >> + >> + add r7, r0, #VCPU_VFP_GUEST >> + store_vfp_state r7 >> + >> + add r7, r0, #VCPU_VFP_HOST >> + ldr r7, [r7] >> + restore_vfp_state r7 >> + >> + ldr r3, [vcpu, #VCPU_VFP_FPEXC] > > either use r0 or vcpu throughout this function please Yeah that's bad - in the same function to > >> + VFPFMXR FPEXC, r3 >> + >> + pop {r3-r7} >> +#endif >> + bx lr >> +ENDPROC(__kvm_restore_host_vfp_state) >> >> /******************************************************************** >> * Hypervisor world-switch code >> @@ -119,11 +142,15 @@ ENTRY(__kvm_vcpu_run) >> @ If the host kernel has not been configured with VFPv3 support, >> @ then it is safer if we deny guests from using it as well. >> #ifdef CONFIG_VFPv3 >> + @ r7 must be preserved until next vfp lazy check > > I don't understand this comment > >> + vfp_inlazy_mode r7, skip_save_host_fpexc >> + >> @ Set FPEXC_EN so the guest doesn't trap floating point instructions >> VFPFMRX r2, FPEXC @ VMRS >> - push {r2} >> + str r2, [vcpu, #VCPU_VFP_FPEXC] >> orr r2, r2, #FPEXC_EN >> VFPFMXR FPEXC, r2 @ VMSR >> +skip_save_host_fpexc: >> #endif >> >> @ Configure Hyp-role >> @@ -131,7 +158,14 @@ ENTRY(__kvm_vcpu_run) >> >> @ Trap coprocessor CRx accesses >> set_hstr vmentry >> - set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) >> + set_hcptr vmentry, (HCPTR_TTA) >> + >> + @ check if vfp_lazy flag set >> + cmp r7, #1 > > if you meant that you need to preserve r7 down to here, could you > instead just move the VFP logic above down here and do the whole VFP > logic in one coherent block? I reworked the code both fpexc save and trap enable are handled at once. > >> + beq skip_guest_vfp_trap >> + set_hcptr vmentry, (HCPTR_TCP(10) | HCPTR_TCP(11)) >> +skip_guest_vfp_trap: >> + >> set_hdcr vmentry >> >> @ Write configured ID register into MIDR alias >> @@ -170,22 +204,14 @@ __kvm_vcpu_return: >> @ Don't trap coprocessor accesses for host kernel >> set_hstr vmexit >> set_hdcr vmexit >> - set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore >> + set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) >> >> #ifdef CONFIG_VFPv3 >> - @ Switch VFP/NEON hardware state to the host's >> - add r7, vcpu, #VCPU_VFP_GUEST >> - store_vfp_state r7 >> - add r7, vcpu, #VCPU_VFP_HOST >> - ldr r7, [r7] >> - restore_vfp_state r7 >> - >> -after_vfp_restore: >> - @ Restore FPEXC_EN which we clobbered on entry >> - pop {r2} >> + vfp_inlazy_mode r2, skip_restore_host_fpexc >> + @ If vfp_lazy is not set, restore FPEXC_EN which we clobbered on entry >> + ldr r2, [vcpu, #VCPU_VFP_FPEXC] > > so we do this restore if, since we scheduled this VCPU thread, the guest > has not touched any VFP regs, is that correct? That's right. > > Did you measure how often we schedule the guest and run it until we > schedule another process without the guest touching any VFP regs? I'm > just wondering if this complexity is worth it, or if we should just > switch the VFP regs on vcpu_load/vcpu_put instead? The loads I've been running mix of fp operations and lmbench mmu - shows huge decrease of fp save/restore like from ~30-50%, down to ~2%. What I did is measured all exits and fp/save restore for both scenarios. So yes it does make a difference. Of course will depend on the load, but should be never be worse then now. > > Also, what do other architectures do here? x86 does a similar thing in it's kvm_arch_vcpu_put(). > >> VFPFMXR FPEXC, r2 >> -#else >> -after_vfp_restore: >> +skip_restore_host_fpexc: >> #endif >> >> @ Reset Hyp-role >> @@ -485,6 +511,10 @@ switch_to_guest_vfp: >> @ NEON/VFP used. Turn on VFP access. >> set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11)) >> >> + @ set lazy mode flag, switch hardware context on vcpu_put >> + mov r1, #1 >> + str r1, [vcpu, #VCPU_VFP_LAZY] >> + >> @ Switch VFP/NEON hardware state to the guest's >> add r7, r0, #VCPU_VFP_HOST >> ldr r7, [r7] >> diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S >> index 702740d..4561171 100644 >> --- a/arch/arm/kvm/interrupts_head.S >> +++ b/arch/arm/kvm/interrupts_head.S >> @@ -594,7 +594,7 @@ ARM_BE8(rev r6, r6 ) >> * If a label is specified with vmexit, it is branched to if VFP wasn't >> * enabled. >> */ >> -.macro set_hcptr operation, mask, label = none >> +.macro set_hcptr operation, mask >> mrc p15, 4, r2, c1, c1, 2 >> ldr r3, =\mask >> .if \operation == vmentry >> @@ -609,13 +609,17 @@ ARM_BE8(rev r6, r6 ) >> beq 1f >> .endif >> isb >> - .if \label != none >> - b \label >> - .endif >> 1: >> .endif >> .endm >> >> +/* Checks if VFP/SIMD lazy flag is set, if it is branch to label. */ > > I don't easily understand the semantics of the lazy flag. When set, > does it mean we've switched the hardware to the guest state? > >> +.macro vfp_inlazy_mode, reg, label >> + ldr \reg, [vcpu, #VCPU_VFP_LAZY] >> + cmp \reg, #1 >> + beq \label >> +.endm >> + >> /* Configures the HDCR (Hyp Debug Configuration Register) on entry/return >> * (hardware reset value is 0) */ >> .macro set_hdcr operation >> -- >> 1.9.1 >> > > Thanks! > -Christoffer > -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Oct 19, 2015 at 04:25:04PM -0700, Mario Smarduch wrote: > > > On 10/19/2015 3:14 AM, Christoffer Dall wrote: > > On Sat, Sep 26, 2015 at 04:43:29PM -0700, Mario Smarduch wrote: > >> This patch enhances current lazy vfp/simd hardware switch. In addition to > >> current lazy switch, it tracks vfp/simd hardware state with a vcpu > >> lazy flag. > >> > >> vcpu lazy flag is set on guest access and trap to vfp/simd hardware switch > >> handler. On vm-enter if lazy flag is set skip trap enable and saving > >> host fpexc. On vm-exit if flag is set skip hardware context switch > >> and return to host with guest context. > >> > >> On vcpu_put check if vcpu lazy flag is set, and execute a hardware context > >> switch to restore host. > >> > >> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com> > >> --- > >> arch/arm/include/asm/kvm_asm.h | 1 + > >> arch/arm/kvm/arm.c | 17 ++++++++++++ > >> arch/arm/kvm/interrupts.S | 60 +++++++++++++++++++++++++++++++----------- > >> arch/arm/kvm/interrupts_head.S | 12 ++++++--- > >> 4 files changed, 71 insertions(+), 19 deletions(-) > >> > >> diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h > >> index 194c91b..4b45d79 100644 > >> --- a/arch/arm/include/asm/kvm_asm.h > >> +++ b/arch/arm/include/asm/kvm_asm.h > >> @@ -97,6 +97,7 @@ extern char __kvm_hyp_code_end[]; > >> extern void __kvm_flush_vm_context(void); > >> extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); > >> extern void __kvm_tlb_flush_vmid(struct kvm *kvm); > >> +extern void __kvm_restore_host_vfp_state(struct kvm_vcpu *vcpu); > >> > >> extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); > >> #endif > >> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c > >> index ce404a5..79f49c7 100644 > >> --- a/arch/arm/kvm/arm.c > >> +++ b/arch/arm/kvm/arm.c > >> @@ -105,6 +105,20 @@ void kvm_arch_check_processor_compat(void *rtn) > >> *(int *)rtn = 0; > >> } > >> > >> +/** > >> + * kvm_switch_fp_regs() - switch guest/host VFP/SIMD registers > >> + * @vcpu: pointer to vcpu structure. > >> + * > > > > nit: stray blank line > ok > > > >> + */ > >> +static void kvm_switch_fp_regs(struct kvm_vcpu *vcpu) > >> +{ > >> +#ifdef CONFIG_ARM > >> + if (vcpu->arch.vfp_lazy == 1) { > >> + kvm_call_hyp(__kvm_restore_host_vfp_state, vcpu); > > > > why do you have to do this in HYP mode ? > Calling it directly works fine. I moved the function outside hyp start/end > range in interrupts.S. Not thinking outside the box, just thought let them all > be hyp calls. > > > > >> + vcpu->arch.vfp_lazy = 0; > >> + } > >> +#endif > > > > we've tried to put stuff like this in header files to avoid the ifdefs > > so far. Could that be done here as well? > > That was a to do, but didn't get around to it. > > > >> +} > >> > >> /** > >> * kvm_arch_init_vm - initializes a VM data structure > >> @@ -295,6 +309,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) > >> > >> void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) > >> { > >> + /* Check if Guest accessed VFP registers */ > > > > misleading comment: this function does more than checking > Yep sure does, will change. > > > >> + kvm_switch_fp_regs(vcpu); > >> + > >> /* > >> * The arch-generic KVM code expects the cpu field of a vcpu to be -1 > >> * if the vcpu is no longer assigned to a cpu. This is used for the > >> diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S > >> index 900ef6d..6d98232 100644 > >> --- a/arch/arm/kvm/interrupts.S > >> +++ b/arch/arm/kvm/interrupts.S > >> @@ -96,6 +96,29 @@ ENTRY(__kvm_flush_vm_context) > >> bx lr > >> ENDPROC(__kvm_flush_vm_context) > >> > >> +/** > >> + * void __kvm_restore_host_vfp_state(struct vcpu *vcpu) - Executes a lazy > >> + * fp/simd switch, saves the guest, restores host. > >> + * > > > > nit: stray blank line > ok. > > > >> + */ > >> +ENTRY(__kvm_restore_host_vfp_state) > >> +#ifdef CONFIG_VFPv3 > >> + push {r3-r7} > >> + > >> + add r7, r0, #VCPU_VFP_GUEST > >> + store_vfp_state r7 > >> + > >> + add r7, r0, #VCPU_VFP_HOST > >> + ldr r7, [r7] > >> + restore_vfp_state r7 > >> + > >> + ldr r3, [vcpu, #VCPU_VFP_FPEXC] > > > > either use r0 or vcpu throughout this function please > Yeah that's bad - in the same function to > > > >> + VFPFMXR FPEXC, r3 > >> + > >> + pop {r3-r7} > >> +#endif > >> + bx lr > >> +ENDPROC(__kvm_restore_host_vfp_state) > >> > >> /******************************************************************** > >> * Hypervisor world-switch code > >> @@ -119,11 +142,15 @@ ENTRY(__kvm_vcpu_run) > >> @ If the host kernel has not been configured with VFPv3 support, > >> @ then it is safer if we deny guests from using it as well. > >> #ifdef CONFIG_VFPv3 > >> + @ r7 must be preserved until next vfp lazy check > > > > I don't understand this comment > > > >> + vfp_inlazy_mode r7, skip_save_host_fpexc > >> + > >> @ Set FPEXC_EN so the guest doesn't trap floating point instructions > >> VFPFMRX r2, FPEXC @ VMRS > >> - push {r2} > >> + str r2, [vcpu, #VCPU_VFP_FPEXC] > >> orr r2, r2, #FPEXC_EN > >> VFPFMXR FPEXC, r2 @ VMSR > >> +skip_save_host_fpexc: > >> #endif > >> > >> @ Configure Hyp-role > >> @@ -131,7 +158,14 @@ ENTRY(__kvm_vcpu_run) > >> > >> @ Trap coprocessor CRx accesses > >> set_hstr vmentry > >> - set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) > >> + set_hcptr vmentry, (HCPTR_TTA) > >> + > >> + @ check if vfp_lazy flag set > >> + cmp r7, #1 > > > > if you meant that you need to preserve r7 down to here, could you > > instead just move the VFP logic above down here and do the whole VFP > > logic in one coherent block? > > I reworked the code both fpexc save and trap enable are handled at once. > > > >> + beq skip_guest_vfp_trap > >> + set_hcptr vmentry, (HCPTR_TCP(10) | HCPTR_TCP(11)) > >> +skip_guest_vfp_trap: > >> + > >> set_hdcr vmentry > >> > >> @ Write configured ID register into MIDR alias > >> @@ -170,22 +204,14 @@ __kvm_vcpu_return: > >> @ Don't trap coprocessor accesses for host kernel > >> set_hstr vmexit > >> set_hdcr vmexit > >> - set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore > >> + set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) > >> > >> #ifdef CONFIG_VFPv3 > >> - @ Switch VFP/NEON hardware state to the host's > >> - add r7, vcpu, #VCPU_VFP_GUEST > >> - store_vfp_state r7 > >> - add r7, vcpu, #VCPU_VFP_HOST > >> - ldr r7, [r7] > >> - restore_vfp_state r7 > >> - > >> -after_vfp_restore: > >> - @ Restore FPEXC_EN which we clobbered on entry > >> - pop {r2} > >> + vfp_inlazy_mode r2, skip_restore_host_fpexc > >> + @ If vfp_lazy is not set, restore FPEXC_EN which we clobbered on entry > >> + ldr r2, [vcpu, #VCPU_VFP_FPEXC] > > > > so we do this restore if, since we scheduled this VCPU thread, the guest > > has not touched any VFP regs, is that correct? > That's right. > > > > Did you measure how often we schedule the guest and run it until we > > schedule another process without the guest touching any VFP regs? I'm > > just wondering if this complexity is worth it, or if we should just > > switch the VFP regs on vcpu_load/vcpu_put instead? > > The loads I've been running mix of fp operations and lmbench mmu - shows huge > decrease of fp save/restore like from ~30-50%, down to ~2%. What I did is > measured all exits and fp/save restore for both scenarios. So yes it does make a > difference. Of course will depend on the load, but should be never be worse then > now. True, and with the renaming the complexity shouldn't be that bad. > > > > Also, what do other architectures do here? > > x86 does a similar thing in it's kvm_arch_vcpu_put(). > ok. > > > >> VFPFMXR FPEXC, r2 > >> -#else > >> -after_vfp_restore: > >> +skip_restore_host_fpexc: > >> #endif > >> > >> @ Reset Hyp-role > >> @@ -485,6 +511,10 @@ switch_to_guest_vfp: > >> @ NEON/VFP used. Turn on VFP access. > >> set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11)) > >> > >> + @ set lazy mode flag, switch hardware context on vcpu_put > >> + mov r1, #1 > >> + str r1, [vcpu, #VCPU_VFP_LAZY] > >> + > >> @ Switch VFP/NEON hardware state to the guest's > >> add r7, r0, #VCPU_VFP_HOST > >> ldr r7, [r7] > >> diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S > >> index 702740d..4561171 100644 > >> --- a/arch/arm/kvm/interrupts_head.S > >> +++ b/arch/arm/kvm/interrupts_head.S > >> @@ -594,7 +594,7 @@ ARM_BE8(rev r6, r6 ) > >> * If a label is specified with vmexit, it is branched to if VFP wasn't > >> * enabled. > >> */ > >> -.macro set_hcptr operation, mask, label = none > >> +.macro set_hcptr operation, mask > >> mrc p15, 4, r2, c1, c1, 2 > >> ldr r3, =\mask > >> .if \operation == vmentry > >> @@ -609,13 +609,17 @@ ARM_BE8(rev r6, r6 ) > >> beq 1f > >> .endif > >> isb > >> - .if \label != none > >> - b \label > >> - .endif > >> 1: > >> .endif > >> .endm > >> > >> +/* Checks if VFP/SIMD lazy flag is set, if it is branch to label. */ > > > > I don't easily understand the semantics of the lazy flag. When set, > > does it mean we've switched the hardware to the guest state? > > The conclusion here is probably that the lazy flag should instead be called the dirty flag or something where a value of true has some more intuitive meaning. Thanks, -Christoffer > >> +.macro vfp_inlazy_mode, reg, label > >> + ldr \reg, [vcpu, #VCPU_VFP_LAZY] > >> + cmp \reg, #1 > >> + beq \label > >> +.endm > >> + > >> /* Configures the HDCR (Hyp Debug Configuration Register) on entry/return > >> * (hardware reset value is 0) */ > >> .macro set_hdcr operation > >> -- > >> 1.9.1 > >> -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/20/2015 12:24 AM, Christoffer Dall wrote: > On Mon, Oct 19, 2015 at 04:25:04PM -0700, Mario Smarduch wrote: >> >> >> On 10/19/2015 3:14 AM, Christoffer Dall wrote: >>> On Sat, Sep 26, 2015 at 04:43:29PM -0700, Mario Smarduch wrote: >>>> This patch enhances current lazy vfp/simd hardware switch. In addition to >>>> current lazy switch, it tracks vfp/simd hardware state with a vcpu >>>> lazy flag. >>>> >>>> vcpu lazy flag is set on guest access and trap to vfp/simd hardware switch >>>> handler. On vm-enter if lazy flag is set skip trap enable and saving >>>> host fpexc. On vm-exit if flag is set skip hardware context switch >>>> and return to host with guest context. >>>> >>>> On vcpu_put check if vcpu lazy flag is set, and execute a hardware context >>>> switch to restore host. >>>> >>>> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com> >>>> --- >>>> arch/arm/include/asm/kvm_asm.h | 1 + >>>> arch/arm/kvm/arm.c | 17 ++++++++++++ >>>> arch/arm/kvm/interrupts.S | 60 +++++++++++++++++++++++++++++++----------- >>>> arch/arm/kvm/interrupts_head.S | 12 ++++++--- >>>> 4 files changed, 71 insertions(+), 19 deletions(-) >>>> >>>> diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h >>>> index 194c91b..4b45d79 100644 >>>> --- a/arch/arm/include/asm/kvm_asm.h >>>> +++ b/arch/arm/include/asm/kvm_asm.h >>>> @@ -97,6 +97,7 @@ extern char __kvm_hyp_code_end[]; >>>> extern void __kvm_flush_vm_context(void); >>>> extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); >>>> extern void __kvm_tlb_flush_vmid(struct kvm *kvm); >>>> +extern void __kvm_restore_host_vfp_state(struct kvm_vcpu *vcpu); >>>> >>>> extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); >>>> #endif >>>> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c >>>> index ce404a5..79f49c7 100644 >>>> --- a/arch/arm/kvm/arm.c >>>> +++ b/arch/arm/kvm/arm.c >>>> @@ -105,6 +105,20 @@ void kvm_arch_check_processor_compat(void *rtn) >>>> *(int *)rtn = 0; >>>> } >>>> >>>> +/** >>>> + * kvm_switch_fp_regs() - switch guest/host VFP/SIMD registers >>>> + * @vcpu: pointer to vcpu structure. >>>> + * >>> >>> nit: stray blank line >> ok >>> >>>> + */ >>>> +static void kvm_switch_fp_regs(struct kvm_vcpu *vcpu) >>>> +{ >>>> +#ifdef CONFIG_ARM >>>> + if (vcpu->arch.vfp_lazy == 1) { >>>> + kvm_call_hyp(__kvm_restore_host_vfp_state, vcpu); >>> >>> why do you have to do this in HYP mode ? >> Calling it directly works fine. I moved the function outside hyp start/end >> range in interrupts.S. Not thinking outside the box, just thought let them all >> be hyp calls. >> >>> >>>> + vcpu->arch.vfp_lazy = 0; >>>> + } >>>> +#endif >>> >>> we've tried to put stuff like this in header files to avoid the ifdefs >>> so far. Could that be done here as well? >> >> That was a to do, but didn't get around to it. >>> >>>> +} >>>> >>>> /** >>>> * kvm_arch_init_vm - initializes a VM data structure >>>> @@ -295,6 +309,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) >>>> >>>> void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) >>>> { >>>> + /* Check if Guest accessed VFP registers */ >>> >>> misleading comment: this function does more than checking >> Yep sure does, will change. >>> >>>> + kvm_switch_fp_regs(vcpu); >>>> + >>>> /* >>>> * The arch-generic KVM code expects the cpu field of a vcpu to be -1 >>>> * if the vcpu is no longer assigned to a cpu. This is used for the >>>> diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S >>>> index 900ef6d..6d98232 100644 >>>> --- a/arch/arm/kvm/interrupts.S >>>> +++ b/arch/arm/kvm/interrupts.S >>>> @@ -96,6 +96,29 @@ ENTRY(__kvm_flush_vm_context) >>>> bx lr >>>> ENDPROC(__kvm_flush_vm_context) >>>> >>>> +/** >>>> + * void __kvm_restore_host_vfp_state(struct vcpu *vcpu) - Executes a lazy >>>> + * fp/simd switch, saves the guest, restores host. >>>> + * >>> >>> nit: stray blank line >> ok. >>> >>>> + */ >>>> +ENTRY(__kvm_restore_host_vfp_state) >>>> +#ifdef CONFIG_VFPv3 >>>> + push {r3-r7} >>>> + >>>> + add r7, r0, #VCPU_VFP_GUEST >>>> + store_vfp_state r7 >>>> + >>>> + add r7, r0, #VCPU_VFP_HOST >>>> + ldr r7, [r7] >>>> + restore_vfp_state r7 >>>> + >>>> + ldr r3, [vcpu, #VCPU_VFP_FPEXC] >>> >>> either use r0 or vcpu throughout this function please >> Yeah that's bad - in the same function to >>> >>>> + VFPFMXR FPEXC, r3 >>>> + >>>> + pop {r3-r7} >>>> +#endif >>>> + bx lr >>>> +ENDPROC(__kvm_restore_host_vfp_state) >>>> >>>> /******************************************************************** >>>> * Hypervisor world-switch code >>>> @@ -119,11 +142,15 @@ ENTRY(__kvm_vcpu_run) >>>> @ If the host kernel has not been configured with VFPv3 support, >>>> @ then it is safer if we deny guests from using it as well. >>>> #ifdef CONFIG_VFPv3 >>>> + @ r7 must be preserved until next vfp lazy check >>> >>> I don't understand this comment >>> >>>> + vfp_inlazy_mode r7, skip_save_host_fpexc >>>> + >>>> @ Set FPEXC_EN so the guest doesn't trap floating point instructions >>>> VFPFMRX r2, FPEXC @ VMRS >>>> - push {r2} >>>> + str r2, [vcpu, #VCPU_VFP_FPEXC] >>>> orr r2, r2, #FPEXC_EN >>>> VFPFMXR FPEXC, r2 @ VMSR >>>> +skip_save_host_fpexc: >>>> #endif >>>> >>>> @ Configure Hyp-role >>>> @@ -131,7 +158,14 @@ ENTRY(__kvm_vcpu_run) >>>> >>>> @ Trap coprocessor CRx accesses >>>> set_hstr vmentry >>>> - set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) >>>> + set_hcptr vmentry, (HCPTR_TTA) >>>> + >>>> + @ check if vfp_lazy flag set >>>> + cmp r7, #1 >>> >>> if you meant that you need to preserve r7 down to here, could you >>> instead just move the VFP logic above down here and do the whole VFP >>> logic in one coherent block? >> >> I reworked the code both fpexc save and trap enable are handled at once. >>> >>>> + beq skip_guest_vfp_trap >>>> + set_hcptr vmentry, (HCPTR_TCP(10) | HCPTR_TCP(11)) >>>> +skip_guest_vfp_trap: >>>> + >>>> set_hdcr vmentry >>>> >>>> @ Write configured ID register into MIDR alias >>>> @@ -170,22 +204,14 @@ __kvm_vcpu_return: >>>> @ Don't trap coprocessor accesses for host kernel >>>> set_hstr vmexit >>>> set_hdcr vmexit >>>> - set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore >>>> + set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) >>>> >>>> #ifdef CONFIG_VFPv3 >>>> - @ Switch VFP/NEON hardware state to the host's >>>> - add r7, vcpu, #VCPU_VFP_GUEST >>>> - store_vfp_state r7 >>>> - add r7, vcpu, #VCPU_VFP_HOST >>>> - ldr r7, [r7] >>>> - restore_vfp_state r7 >>>> - >>>> -after_vfp_restore: >>>> - @ Restore FPEXC_EN which we clobbered on entry >>>> - pop {r2} >>>> + vfp_inlazy_mode r2, skip_restore_host_fpexc >>>> + @ If vfp_lazy is not set, restore FPEXC_EN which we clobbered on entry >>>> + ldr r2, [vcpu, #VCPU_VFP_FPEXC] >>> >>> so we do this restore if, since we scheduled this VCPU thread, the guest >>> has not touched any VFP regs, is that correct? >> That's right. >>> >>> Did you measure how often we schedule the guest and run it until we >>> schedule another process without the guest touching any VFP regs? I'm >>> just wondering if this complexity is worth it, or if we should just >>> switch the VFP regs on vcpu_load/vcpu_put instead? >> >> The loads I've been running mix of fp operations and lmbench mmu - shows huge >> decrease of fp save/restore like from ~30-50%, down to ~2%. What I did is >> measured all exits and fp/save restore for both scenarios. So yes it does make a >> difference. Of course will depend on the load, but should be never be worse then >> now. > > True, and with the renaming the complexity shouldn't be that bad. > >>> >>> Also, what do other architectures do here? >> >> x86 does a similar thing in it's kvm_arch_vcpu_put(). >> > > ok. > >>> >>>> VFPFMXR FPEXC, r2 >>>> -#else >>>> -after_vfp_restore: >>>> +skip_restore_host_fpexc: >>>> #endif >>>> >>>> @ Reset Hyp-role >>>> @@ -485,6 +511,10 @@ switch_to_guest_vfp: >>>> @ NEON/VFP used. Turn on VFP access. >>>> set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11)) >>>> >>>> + @ set lazy mode flag, switch hardware context on vcpu_put >>>> + mov r1, #1 >>>> + str r1, [vcpu, #VCPU_VFP_LAZY] >>>> + >>>> @ Switch VFP/NEON hardware state to the guest's >>>> add r7, r0, #VCPU_VFP_HOST >>>> ldr r7, [r7] >>>> diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S >>>> index 702740d..4561171 100644 >>>> --- a/arch/arm/kvm/interrupts_head.S >>>> +++ b/arch/arm/kvm/interrupts_head.S >>>> @@ -594,7 +594,7 @@ ARM_BE8(rev r6, r6 ) >>>> * If a label is specified with vmexit, it is branched to if VFP wasn't >>>> * enabled. >>>> */ >>>> -.macro set_hcptr operation, mask, label = none >>>> +.macro set_hcptr operation, mask >>>> mrc p15, 4, r2, c1, c1, 2 >>>> ldr r3, =\mask >>>> .if \operation == vmentry >>>> @@ -609,13 +609,17 @@ ARM_BE8(rev r6, r6 ) >>>> beq 1f >>>> .endif >>>> isb >>>> - .if \label != none >>>> - b \label >>>> - .endif >>>> 1: >>>> .endif >>>> .endm >>>> >>>> +/* Checks if VFP/SIMD lazy flag is set, if it is branch to label. */ >>> >>> I don't easily understand the semantics of the lazy flag. When set, >>> does it mean we've switched the hardware to the guest state? >>> > > The conclusion here is probably that the lazy flag should instead be > called the dirty flag or something where a value of true has some more > intuitive meaning. > > Thanks, > -Christoffer So to summarize arm patches will be reworked to include your latest comments. arm64 will directly call the host el1 function in vcpu_put. And a retest of both. Any cutoff dates in mind? Thanks. > >>>> +.macro vfp_inlazy_mode, reg, label >>>> + ldr \reg, [vcpu, #VCPU_VFP_LAZY] >>>> + cmp \reg, #1 >>>> + beq \label >>>> +.endm >>>> + >>>> /* Configures the HDCR (Hyp Debug Configuration Register) on entry/return >>>> * (hardware reset value is 0) */ >>>> .macro set_hdcr operation >>>> -- >>>> 1.9.1 >>>> -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Oct 20, 2015 at 06:10:59PM -0700, Mario Smarduch wrote: > > > On 10/20/2015 12:24 AM, Christoffer Dall wrote: > > On Mon, Oct 19, 2015 at 04:25:04PM -0700, Mario Smarduch wrote: > >> > >> > >> On 10/19/2015 3:14 AM, Christoffer Dall wrote: > >>> On Sat, Sep 26, 2015 at 04:43:29PM -0700, Mario Smarduch wrote: > >>>> This patch enhances current lazy vfp/simd hardware switch. In addition to > >>>> current lazy switch, it tracks vfp/simd hardware state with a vcpu > >>>> lazy flag. > >>>> > >>>> vcpu lazy flag is set on guest access and trap to vfp/simd hardware switch > >>>> handler. On vm-enter if lazy flag is set skip trap enable and saving > >>>> host fpexc. On vm-exit if flag is set skip hardware context switch > >>>> and return to host with guest context. > >>>> > >>>> On vcpu_put check if vcpu lazy flag is set, and execute a hardware context > >>>> switch to restore host. > >>>> > >>>> Signed-off-by: Mario Smarduch <m.smarduch@samsung.com> > >>>> --- > >>>> arch/arm/include/asm/kvm_asm.h | 1 + > >>>> arch/arm/kvm/arm.c | 17 ++++++++++++ > >>>> arch/arm/kvm/interrupts.S | 60 +++++++++++++++++++++++++++++++----------- > >>>> arch/arm/kvm/interrupts_head.S | 12 ++++++--- > >>>> 4 files changed, 71 insertions(+), 19 deletions(-) > >>>> > >>>> diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h > >>>> index 194c91b..4b45d79 100644 > >>>> --- a/arch/arm/include/asm/kvm_asm.h > >>>> +++ b/arch/arm/include/asm/kvm_asm.h > >>>> @@ -97,6 +97,7 @@ extern char __kvm_hyp_code_end[]; > >>>> extern void __kvm_flush_vm_context(void); > >>>> extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); > >>>> extern void __kvm_tlb_flush_vmid(struct kvm *kvm); > >>>> +extern void __kvm_restore_host_vfp_state(struct kvm_vcpu *vcpu); > >>>> > >>>> extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); > >>>> #endif > >>>> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c > >>>> index ce404a5..79f49c7 100644 > >>>> --- a/arch/arm/kvm/arm.c > >>>> +++ b/arch/arm/kvm/arm.c > >>>> @@ -105,6 +105,20 @@ void kvm_arch_check_processor_compat(void *rtn) > >>>> *(int *)rtn = 0; > >>>> } > >>>> > >>>> +/** > >>>> + * kvm_switch_fp_regs() - switch guest/host VFP/SIMD registers > >>>> + * @vcpu: pointer to vcpu structure. > >>>> + * > >>> > >>> nit: stray blank line > >> ok > >>> > >>>> + */ > >>>> +static void kvm_switch_fp_regs(struct kvm_vcpu *vcpu) > >>>> +{ > >>>> +#ifdef CONFIG_ARM > >>>> + if (vcpu->arch.vfp_lazy == 1) { > >>>> + kvm_call_hyp(__kvm_restore_host_vfp_state, vcpu); > >>> > >>> why do you have to do this in HYP mode ? > >> Calling it directly works fine. I moved the function outside hyp start/end > >> range in interrupts.S. Not thinking outside the box, just thought let them all > >> be hyp calls. > >> > >>> > >>>> + vcpu->arch.vfp_lazy = 0; > >>>> + } > >>>> +#endif > >>> > >>> we've tried to put stuff like this in header files to avoid the ifdefs > >>> so far. Could that be done here as well? > >> > >> That was a to do, but didn't get around to it. > >>> > >>>> +} > >>>> > >>>> /** > >>>> * kvm_arch_init_vm - initializes a VM data structure > >>>> @@ -295,6 +309,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) > >>>> > >>>> void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) > >>>> { > >>>> + /* Check if Guest accessed VFP registers */ > >>> > >>> misleading comment: this function does more than checking > >> Yep sure does, will change. > >>> > >>>> + kvm_switch_fp_regs(vcpu); > >>>> + > >>>> /* > >>>> * The arch-generic KVM code expects the cpu field of a vcpu to be -1 > >>>> * if the vcpu is no longer assigned to a cpu. This is used for the > >>>> diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S > >>>> index 900ef6d..6d98232 100644 > >>>> --- a/arch/arm/kvm/interrupts.S > >>>> +++ b/arch/arm/kvm/interrupts.S > >>>> @@ -96,6 +96,29 @@ ENTRY(__kvm_flush_vm_context) > >>>> bx lr > >>>> ENDPROC(__kvm_flush_vm_context) > >>>> > >>>> +/** > >>>> + * void __kvm_restore_host_vfp_state(struct vcpu *vcpu) - Executes a lazy > >>>> + * fp/simd switch, saves the guest, restores host. > >>>> + * > >>> > >>> nit: stray blank line > >> ok. > >>> > >>>> + */ > >>>> +ENTRY(__kvm_restore_host_vfp_state) > >>>> +#ifdef CONFIG_VFPv3 > >>>> + push {r3-r7} > >>>> + > >>>> + add r7, r0, #VCPU_VFP_GUEST > >>>> + store_vfp_state r7 > >>>> + > >>>> + add r7, r0, #VCPU_VFP_HOST > >>>> + ldr r7, [r7] > >>>> + restore_vfp_state r7 > >>>> + > >>>> + ldr r3, [vcpu, #VCPU_VFP_FPEXC] > >>> > >>> either use r0 or vcpu throughout this function please > >> Yeah that's bad - in the same function to > >>> > >>>> + VFPFMXR FPEXC, r3 > >>>> + > >>>> + pop {r3-r7} > >>>> +#endif > >>>> + bx lr > >>>> +ENDPROC(__kvm_restore_host_vfp_state) > >>>> > >>>> /******************************************************************** > >>>> * Hypervisor world-switch code > >>>> @@ -119,11 +142,15 @@ ENTRY(__kvm_vcpu_run) > >>>> @ If the host kernel has not been configured with VFPv3 support, > >>>> @ then it is safer if we deny guests from using it as well. > >>>> #ifdef CONFIG_VFPv3 > >>>> + @ r7 must be preserved until next vfp lazy check > >>> > >>> I don't understand this comment > >>> > >>>> + vfp_inlazy_mode r7, skip_save_host_fpexc > >>>> + > >>>> @ Set FPEXC_EN so the guest doesn't trap floating point instructions > >>>> VFPFMRX r2, FPEXC @ VMRS > >>>> - push {r2} > >>>> + str r2, [vcpu, #VCPU_VFP_FPEXC] > >>>> orr r2, r2, #FPEXC_EN > >>>> VFPFMXR FPEXC, r2 @ VMSR > >>>> +skip_save_host_fpexc: > >>>> #endif > >>>> > >>>> @ Configure Hyp-role > >>>> @@ -131,7 +158,14 @@ ENTRY(__kvm_vcpu_run) > >>>> > >>>> @ Trap coprocessor CRx accesses > >>>> set_hstr vmentry > >>>> - set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) > >>>> + set_hcptr vmentry, (HCPTR_TTA) > >>>> + > >>>> + @ check if vfp_lazy flag set > >>>> + cmp r7, #1 > >>> > >>> if you meant that you need to preserve r7 down to here, could you > >>> instead just move the VFP logic above down here and do the whole VFP > >>> logic in one coherent block? > >> > >> I reworked the code both fpexc save and trap enable are handled at once. > >>> > >>>> + beq skip_guest_vfp_trap > >>>> + set_hcptr vmentry, (HCPTR_TCP(10) | HCPTR_TCP(11)) > >>>> +skip_guest_vfp_trap: > >>>> + > >>>> set_hdcr vmentry > >>>> > >>>> @ Write configured ID register into MIDR alias > >>>> @@ -170,22 +204,14 @@ __kvm_vcpu_return: > >>>> @ Don't trap coprocessor accesses for host kernel > >>>> set_hstr vmexit > >>>> set_hdcr vmexit > >>>> - set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore > >>>> + set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) > >>>> > >>>> #ifdef CONFIG_VFPv3 > >>>> - @ Switch VFP/NEON hardware state to the host's > >>>> - add r7, vcpu, #VCPU_VFP_GUEST > >>>> - store_vfp_state r7 > >>>> - add r7, vcpu, #VCPU_VFP_HOST > >>>> - ldr r7, [r7] > >>>> - restore_vfp_state r7 > >>>> - > >>>> -after_vfp_restore: > >>>> - @ Restore FPEXC_EN which we clobbered on entry > >>>> - pop {r2} > >>>> + vfp_inlazy_mode r2, skip_restore_host_fpexc > >>>> + @ If vfp_lazy is not set, restore FPEXC_EN which we clobbered on entry > >>>> + ldr r2, [vcpu, #VCPU_VFP_FPEXC] > >>> > >>> so we do this restore if, since we scheduled this VCPU thread, the guest > >>> has not touched any VFP regs, is that correct? > >> That's right. > >>> > >>> Did you measure how often we schedule the guest and run it until we > >>> schedule another process without the guest touching any VFP regs? I'm > >>> just wondering if this complexity is worth it, or if we should just > >>> switch the VFP regs on vcpu_load/vcpu_put instead? > >> > >> The loads I've been running mix of fp operations and lmbench mmu - shows huge > >> decrease of fp save/restore like from ~30-50%, down to ~2%. What I did is > >> measured all exits and fp/save restore for both scenarios. So yes it does make a > >> difference. Of course will depend on the load, but should be never be worse then > >> now. > > > > True, and with the renaming the complexity shouldn't be that bad. > > > >>> > >>> Also, what do other architectures do here? > >> > >> x86 does a similar thing in it's kvm_arch_vcpu_put(). > >> > > > > ok. > > > >>> > >>>> VFPFMXR FPEXC, r2 > >>>> -#else > >>>> -after_vfp_restore: > >>>> +skip_restore_host_fpexc: > >>>> #endif > >>>> > >>>> @ Reset Hyp-role > >>>> @@ -485,6 +511,10 @@ switch_to_guest_vfp: > >>>> @ NEON/VFP used. Turn on VFP access. > >>>> set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11)) > >>>> > >>>> + @ set lazy mode flag, switch hardware context on vcpu_put > >>>> + mov r1, #1 > >>>> + str r1, [vcpu, #VCPU_VFP_LAZY] > >>>> + > >>>> @ Switch VFP/NEON hardware state to the guest's > >>>> add r7, r0, #VCPU_VFP_HOST > >>>> ldr r7, [r7] > >>>> diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S > >>>> index 702740d..4561171 100644 > >>>> --- a/arch/arm/kvm/interrupts_head.S > >>>> +++ b/arch/arm/kvm/interrupts_head.S > >>>> @@ -594,7 +594,7 @@ ARM_BE8(rev r6, r6 ) > >>>> * If a label is specified with vmexit, it is branched to if VFP wasn't > >>>> * enabled. > >>>> */ > >>>> -.macro set_hcptr operation, mask, label = none > >>>> +.macro set_hcptr operation, mask > >>>> mrc p15, 4, r2, c1, c1, 2 > >>>> ldr r3, =\mask > >>>> .if \operation == vmentry > >>>> @@ -609,13 +609,17 @@ ARM_BE8(rev r6, r6 ) > >>>> beq 1f > >>>> .endif > >>>> isb > >>>> - .if \label != none > >>>> - b \label > >>>> - .endif > >>>> 1: > >>>> .endif > >>>> .endm > >>>> > >>>> +/* Checks if VFP/SIMD lazy flag is set, if it is branch to label. */ > >>> > >>> I don't easily understand the semantics of the lazy flag. When set, > >>> does it mean we've switched the hardware to the guest state? > >>> > > > > The conclusion here is probably that the lazy flag should instead be > > called the dirty flag or something where a value of true has some more > > intuitive meaning. > > > > Thanks, > > -Christoffer > > So to summarize arm patches will be reworked to include your latest comments. > arm64 will directly call the host el1 function in vcpu_put. And a retest of both. > > Any cutoff dates in mind? > We're getting close to v4.4, but I'll try to have a review of your arm64 patches soon and if they're similarly simple and I have time to test them thoroughly, I may consider adding them given the immediate performance benefit. -Christoffer -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 194c91b..4b45d79 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -97,6 +97,7 @@ extern char __kvm_hyp_code_end[]; extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); +extern void __kvm_restore_host_vfp_state(struct kvm_vcpu *vcpu); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); #endif diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index ce404a5..79f49c7 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -105,6 +105,20 @@ void kvm_arch_check_processor_compat(void *rtn) *(int *)rtn = 0; } +/** + * kvm_switch_fp_regs() - switch guest/host VFP/SIMD registers + * @vcpu: pointer to vcpu structure. + * + */ +static void kvm_switch_fp_regs(struct kvm_vcpu *vcpu) +{ +#ifdef CONFIG_ARM + if (vcpu->arch.vfp_lazy == 1) { + kvm_call_hyp(__kvm_restore_host_vfp_state, vcpu); + vcpu->arch.vfp_lazy = 0; + } +#endif +} /** * kvm_arch_init_vm - initializes a VM data structure @@ -295,6 +309,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) { + /* Check if Guest accessed VFP registers */ + kvm_switch_fp_regs(vcpu); + /* * The arch-generic KVM code expects the cpu field of a vcpu to be -1 * if the vcpu is no longer assigned to a cpu. This is used for the diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 900ef6d..6d98232 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -96,6 +96,29 @@ ENTRY(__kvm_flush_vm_context) bx lr ENDPROC(__kvm_flush_vm_context) +/** + * void __kvm_restore_host_vfp_state(struct vcpu *vcpu) - Executes a lazy + * fp/simd switch, saves the guest, restores host. + * + */ +ENTRY(__kvm_restore_host_vfp_state) +#ifdef CONFIG_VFPv3 + push {r3-r7} + + add r7, r0, #VCPU_VFP_GUEST + store_vfp_state r7 + + add r7, r0, #VCPU_VFP_HOST + ldr r7, [r7] + restore_vfp_state r7 + + ldr r3, [vcpu, #VCPU_VFP_FPEXC] + VFPFMXR FPEXC, r3 + + pop {r3-r7} +#endif + bx lr +ENDPROC(__kvm_restore_host_vfp_state) /******************************************************************** * Hypervisor world-switch code @@ -119,11 +142,15 @@ ENTRY(__kvm_vcpu_run) @ If the host kernel has not been configured with VFPv3 support, @ then it is safer if we deny guests from using it as well. #ifdef CONFIG_VFPv3 + @ r7 must be preserved until next vfp lazy check + vfp_inlazy_mode r7, skip_save_host_fpexc + @ Set FPEXC_EN so the guest doesn't trap floating point instructions VFPFMRX r2, FPEXC @ VMRS - push {r2} + str r2, [vcpu, #VCPU_VFP_FPEXC] orr r2, r2, #FPEXC_EN VFPFMXR FPEXC, r2 @ VMSR +skip_save_host_fpexc: #endif @ Configure Hyp-role @@ -131,7 +158,14 @@ ENTRY(__kvm_vcpu_run) @ Trap coprocessor CRx accesses set_hstr vmentry - set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) + set_hcptr vmentry, (HCPTR_TTA) + + @ check if vfp_lazy flag set + cmp r7, #1 + beq skip_guest_vfp_trap + set_hcptr vmentry, (HCPTR_TCP(10) | HCPTR_TCP(11)) +skip_guest_vfp_trap: + set_hdcr vmentry @ Write configured ID register into MIDR alias @@ -170,22 +204,14 @@ __kvm_vcpu_return: @ Don't trap coprocessor accesses for host kernel set_hstr vmexit set_hdcr vmexit - set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore + set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)) #ifdef CONFIG_VFPv3 - @ Switch VFP/NEON hardware state to the host's - add r7, vcpu, #VCPU_VFP_GUEST - store_vfp_state r7 - add r7, vcpu, #VCPU_VFP_HOST - ldr r7, [r7] - restore_vfp_state r7 - -after_vfp_restore: - @ Restore FPEXC_EN which we clobbered on entry - pop {r2} + vfp_inlazy_mode r2, skip_restore_host_fpexc + @ If vfp_lazy is not set, restore FPEXC_EN which we clobbered on entry + ldr r2, [vcpu, #VCPU_VFP_FPEXC] VFPFMXR FPEXC, r2 -#else -after_vfp_restore: +skip_restore_host_fpexc: #endif @ Reset Hyp-role @@ -485,6 +511,10 @@ switch_to_guest_vfp: @ NEON/VFP used. Turn on VFP access. set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11)) + @ set lazy mode flag, switch hardware context on vcpu_put + mov r1, #1 + str r1, [vcpu, #VCPU_VFP_LAZY] + @ Switch VFP/NEON hardware state to the guest's add r7, r0, #VCPU_VFP_HOST ldr r7, [r7] diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S index 702740d..4561171 100644 --- a/arch/arm/kvm/interrupts_head.S +++ b/arch/arm/kvm/interrupts_head.S @@ -594,7 +594,7 @@ ARM_BE8(rev r6, r6 ) * If a label is specified with vmexit, it is branched to if VFP wasn't * enabled. */ -.macro set_hcptr operation, mask, label = none +.macro set_hcptr operation, mask mrc p15, 4, r2, c1, c1, 2 ldr r3, =\mask .if \operation == vmentry @@ -609,13 +609,17 @@ ARM_BE8(rev r6, r6 ) beq 1f .endif isb - .if \label != none - b \label - .endif 1: .endif .endm +/* Checks if VFP/SIMD lazy flag is set, if it is branch to label. */ +.macro vfp_inlazy_mode, reg, label + ldr \reg, [vcpu, #VCPU_VFP_LAZY] + cmp \reg, #1 + beq \label +.endm + /* Configures the HDCR (Hyp Debug Configuration Register) on entry/return * (hardware reset value is 0) */ .macro set_hdcr operation
This patch enhances current lazy vfp/simd hardware switch. In addition to current lazy switch, it tracks vfp/simd hardware state with a vcpu lazy flag. vcpu lazy flag is set on guest access and trap to vfp/simd hardware switch handler. On vm-enter if lazy flag is set skip trap enable and saving host fpexc. On vm-exit if flag is set skip hardware context switch and return to host with guest context. On vcpu_put check if vcpu lazy flag is set, and execute a hardware context switch to restore host. Signed-off-by: Mario Smarduch <m.smarduch@samsung.com> --- arch/arm/include/asm/kvm_asm.h | 1 + arch/arm/kvm/arm.c | 17 ++++++++++++ arch/arm/kvm/interrupts.S | 60 +++++++++++++++++++++++++++++++----------- arch/arm/kvm/interrupts_head.S | 12 ++++++--- 4 files changed, 71 insertions(+), 19 deletions(-)