[RFC,2/2] pci: host: pci-dra7xx: Enable x2 mode support
diff mbox

Message ID 1443445058-643-3-git-send-email-kishon@ti.com
State New, archived
Headers show

Commit Message

Kishon Vijay Abraham I Sept. 28, 2015, 12:57 p.m. UTC
Perform syscon configurations to get x2 mode to working in DRA74x and
DRA72x. Also add a new compatible string to dfferentiate
DRA72x and DRA74x, since b1c0 mask is different for both these platforms.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/pci/ti-pci.txt |    7 +-
 drivers/pci/host/pci-dra7xx.c                    |   81 +++++++++++++++++++++-
 2 files changed, 86 insertions(+), 2 deletions(-)

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 60e2516..1ae1705 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -1,7 +1,8 @@ 
 TI PCI Controllers
 
 PCIe Designware Controller
- - compatible: Should be "ti,dra7-pcie""
+ - compatible: Should be "ti,dra7-pcie" for DRA74x
+	       Should be "ti,dra72-pcie" for DRA72x
  - reg : Two register ranges as listed in the reg-names property
  - reg-names : The first entry must be "ti-conf" for the TI specific registers
 	       The second entry must be "rc-dbics" for the designware pcie
@@ -14,6 +15,10 @@  PCIe Designware Controller
 	       where <X> is the instance number of the pcie from the HW spec.
  - interrupts : Two interrupt entries must be specified. The first one is for
 		main interrupt line and the second for MSI interrupt line.
+ - syscon-lane-conf : phandle/offset pair. Phandle to the system control module and the
+   register offset to specify 1 lane or 2 lane.
+ - syscon-lane-sel : phandle/offset pair. Phandle to the system control module and the
+   register offset to specify lane selection.
  - #address-cells,
    #size-cells,
    #interrupt-cells,
diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
index e15b2e2..fb23a58 100644
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -22,8 +22,11 @@ 
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/of_platform.h>
 #include <linux/resource.h>
 #include <linux/types.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #include "pcie-designware.h"
 
@@ -63,14 +66,22 @@ 
 #define	PCIECTRL_DRA7XX_CONF_PHY_CS			0x010C
 #define	LINK_UP						BIT(16)
 
+#define PCIE_1LANE_2LANE_SELECTION			BIT(13)
+#define PCIE_B1C0_MODE_SEL				BIT(2)
+
 struct dra7xx_pcie {
 	void __iomem		*base;
+	u32			*b1c0_mask;
 	struct phy		**phy;
 	int			lanes;
 	struct device		*dev;
 	struct pcie_port	pp;
 };
 
+struct dra7xx_pcie_data {
+	u32	b1co_mode_sel_mask;
+};
+
 #define to_dra7xx_pcie(x)	container_of((x), struct dra7xx_pcie, pp)
 
 static inline u32 dra7xx_pcie_readl(struct dra7xx_pcie *pcie, u32 offset)
@@ -322,6 +333,57 @@  static int __init dra7xx_add_pcie_port(struct dra7xx_pcie *dra7xx,
 	return 0;
 }
 
+static const struct of_device_id of_dra7xx_pcie_match[];
+
+static int dra7xx_pcie_configure_two_lane(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct regmap *pcie_syscon;
+	unsigned int pcie_reg;
+	struct dra7xx_pcie_data *data;
+	const struct of_device_id *match;
+
+	match = of_match_device(of_dra7xx_pcie_match, dev);
+	if (!match)
+		return -EINVAL;
+
+	data = (struct dra7xx_pcie_data *)match->data;
+	if (!data) {
+		dev_err(dev, "no b1c0 mask data\n");
+		return -EINVAL;
+	}
+
+	pcie_syscon = syscon_regmap_lookup_by_phandle(np, "syscon-lane-conf");
+	if (IS_ERR(pcie_syscon)) {
+		dev_err(dev, "unable to get syscon-lane-conf\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_index(np, "syscon-lane-conf", 1, &pcie_reg)) {
+		dev_err(dev, "couldn't get lane configuration reg offset\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(pcie_syscon, pcie_reg, PCIE_1LANE_2LANE_SELECTION,
+			   PCIE_1LANE_2LANE_SELECTION);
+
+	pcie_syscon = syscon_regmap_lookup_by_phandle(np, "syscon-lane-sel");
+	if (IS_ERR(pcie_syscon)) {
+		dev_err(dev, "unable to get syscon-lane-sel\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_index(np, "syscon-lane-sel", 1, &pcie_reg)) {
+		dev_err(dev, "couldn't get lane selection reg offset\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(pcie_syscon, pcie_reg, data->b1co_mode_sel_mask,
+			   PCIE_B1C0_MODE_SEL);
+
+	return 0;
+}
+
 static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 {
 	u32 reg;
@@ -386,6 +448,14 @@  static int __init dra7xx_pcie_probe(struct platform_device *pdev)
 			phy_exit(phy[i]);
 			goto err_phy;
 		}
+
+		if (i == 1) {
+			ret = dra7xx_pcie_configure_two_lane(dev);
+			if (ret < 0) {
+				i++;
+				goto err_phy;
+			}
+		}
 	}
 
 	dra7xx->base = base;
@@ -541,8 +611,17 @@  static const struct dev_pm_ops dra7xx_pcie_pm_ops = {
 				      dra7xx_pcie_resume_noirq)
 };
 
+static const struct dra7xx_pcie_data dra7_pcie_data = {
+	.b1co_mode_sel_mask = BIT(2),
+};
+
+static const struct dra7xx_pcie_data dra72_pcie_data = {
+	.b1co_mode_sel_mask = GENMASK(2, 3),
+};
+
 static const struct of_device_id of_dra7xx_pcie_match[] = {
-	{ .compatible = "ti,dra7-pcie", },
+	{ .compatible = "ti,dra7-pcie", .data = &dra7_pcie_data },
+	{ .compatible = "ti,dra72-pcie", .data = &dra72_pcie_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, of_dra7xx_pcie_match);