[v3,6/8] ARM: rockchip: add support smp for rk3036
diff mbox

Message ID 3169044.xzd1xSvYRt@diego
State New
Headers show

Commit Message

Heiko Stübner Oct. 2, 2015, 9:19 a.m. UTC
Hi,

Am Dienstag, 29. September 2015, 10:13:51 schrieb Xing Zheng:
> The rk3036 is dual-core soc, we can use this patch to enable cpu1
> enter boot secondary, and hotplug(online/offline).
> 
> Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
> ---
> 
> Changes in v3: None
> 
>  arch/arm/mach-rockchip/platsmp.c |  142
> ++++++++++++++++++++++++++++++++++++++ 1 file changed, 142 insertions(+)
> 
> diff --git a/arch/arm/mach-rockchip/platsmp.c
> b/arch/arm/mach-rockchip/platsmp.c index 3e7a4b7..7864bf3 100644
> --- a/arch/arm/mach-rockchip/platsmp.c
> +++ b/arch/arm/mach-rockchip/platsmp.c
> @@ -34,6 +34,8 @@
> 
>  static void __iomem *scu_base_addr;
>  static void __iomem *sram_base_addr;
> +static void __iomem *cru_base_addr;
> +
>  static int ncores;
> 
>  #define PMU_PWRDN_CON		0x08
> @@ -41,6 +43,8 @@ static int ncores;
> 
>  #define PMU_PWRDN_SCU		4
> 
> +#define RK3036_SOFTRST_CON(x)	((x) * 0x4 + 0x110)
> +
>  static struct regmap *pmu;
> 
>  static int pmu_power_domain_is_on(int pd)
> @@ -350,3 +354,141 @@ static struct smp_operations rockchip_smp_ops
> __initdata = { };
> 
>  CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp",
> &rockchip_smp_ops); +
> +/* for RK3036 */
> +
> +static int rk3036_set_power_domain(int pd, bool on)
> +{
> +	struct reset_control *rstc = rockchip_get_core_reset(pd);
> +	u32 val;
> +
> +	/* there are 2cpus on rk3036 soc, we just need to be care cpu1 */
> +	if (pd != 1)
> +		return 0;
> +
> +	if (IS_ERR(rstc) && read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
> +		pr_err("%s: could not get reset control for core %d\n",
> +		       __func__, pd);
> +		return PTR_ERR(rstc);
> +	}
> +
> +	/*
> +	 * We need to soft reset the cpu when we turn off the cpu power domain,
> +	 * or else the active processors might be stalled when the individual
> +	 * processor is powered down.
> +	 */
> +	if (!IS_ERR(rstc) && !on)
> +		reset_control_assert(rstc);
> +
> +	val = (on) ? 0 : 1;
> +	val = (val << pd) | BIT(pd + 16);
> +	writel_relaxed(val, cru_base_addr + RK3036_SOFTRST_CON(0));

simply mapping the CRU in some arbitary part and then writing to the raw
reset register is just a no-go. Even more, as it also conflicts with the
reset-control handling directly above and below.


> +
> +	dsb();
> +
> +	if (!IS_ERR(rstc)) {
> +		if (on)
> +			reset_control_deassert(rstc);
> +		reset_control_put(rstc);
> +	}
> +
> +	return 0;
> +}

In general you are duplicating a lot of code for the simple case of not being
able to control the power domains. The following should do the trick as well
I'd think and produce a lot less code duplication?
[of course adapting the dts slightly for the sram now old name]


Heiko

-------------- 8< --------------
From 3b3910db3a783f625dcc1f05c547680c61c9c818 Mon Sep 17 00:00:00 2001
From: Heiko Stuebner <heiko@sntech.de>
Date: Fri, 2 Oct 2015 10:24:08 +0200
Subject: [PATCH] ARM: rockchip: add support smp for rk3036

The dual-core Cortex A7 rk3036 is a bit special in that it does not allow
to control the actual powerdomain of the cpu cores, while the rest of the
smp-bringup like reset control and entry address handling stays the same.
Its bigger sibling, the quad-core rk3128 again allows powerdomain control.

So allow that case by introducing a separate smp-enable-method, that simply
disables powerdomain handling in the common code.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 Documentation/devicetree/bindings/arm/cpus.txt |  1 +
 arch/arm/mach-rockchip/platsmp.c               | 45 +++++++++++++++++++-------
 2 files changed, 34 insertions(+), 12 deletions(-)

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 91e6e5c..261cc27 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -198,6 +198,7 @@  nodes to be present and contain the properties described below.
 			    "qcom,gcc-msm8660"
 			    "qcom,kpss-acc-v1"
 			    "qcom,kpss-acc-v2"
+			    "rockchip,rk3036-smp"
 			    "rockchip,rk3066-smp"
 			    "ste,dbx500-smp"
 
diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c
index 3e7a4b7..5c138f9 100644
--- a/arch/arm/mach-rockchip/platsmp.c
+++ b/arch/arm/mach-rockchip/platsmp.c
@@ -42,6 +42,7 @@  static int ncores;
 #define PMU_PWRDN_SCU		4
 
 static struct regmap *pmu;
+static int has_pmu = true;
 
 static int pmu_power_domain_is_on(int pd)
 {
@@ -89,20 +90,23 @@  static int pmu_set_power_domain(int pd, bool on)
 	if (!IS_ERR(rstc) && !on)
 		reset_control_assert(rstc);
 
-	ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
-	if (ret < 0) {
-		pr_err("%s: could not update power domain\n", __func__);
-		return ret;
-	}
-
-	ret = -1;
-	while (ret != on) {
-		ret = pmu_power_domain_is_on(pd);
+	if (has_pmu) {
+		ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
 		if (ret < 0) {
-			pr_err("%s: could not read power domain state\n",
+			pr_err("%s: could not update power domain\n",
 			       __func__);
 			return ret;
 		}
+
+		ret = -1;
+		while (ret != on) {
+			ret = pmu_power_domain_is_on(pd);
+			if (ret < 0) {
+				pr_err("%s: could not read power domain state\n",
+				       __func__);
+				return ret;
+			}
+		}
 	}
 
 	if (!IS_ERR(rstc)) {
@@ -122,7 +126,7 @@  static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
 
-	if (!sram_base_addr || !pmu) {
+	if (!sram_base_addr || (has_pmu && !pmu)) {
 		pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
 		return -ENXIO;
 	}
@@ -275,7 +279,7 @@  static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		return;
 	}
 
-	if (rockchip_smp_prepare_pmu())
+	if (has_pmu && rockchip_smp_prepare_pmu())
 		return;
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
@@ -318,6 +322,13 @@  static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
 		pmu_set_power_domain(0 + i, false);
 }
 
+static void __init rk3036_smp_prepare_cpus(unsigned int max_cpus)
+{
+	has_pmu = false;
+
+	rockchip_smp_prepare_cpus(max_cpus);
+}
+
 #ifdef CONFIG_HOTPLUG_CPU
 static int rockchip_cpu_kill(unsigned int cpu)
 {
@@ -340,6 +351,15 @@  static void rockchip_cpu_die(unsigned int cpu)
 }
 #endif
 
+static struct smp_operations rk3036_smp_ops __initdata = {
+	.smp_prepare_cpus	= rk3036_smp_prepare_cpus,
+	.smp_boot_secondary	= rockchip_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= rockchip_cpu_kill,
+	.cpu_die		= rockchip_cpu_die,
+#endif
+};
+
 static struct smp_operations rockchip_smp_ops __initdata = {
 	.smp_prepare_cpus	= rockchip_smp_prepare_cpus,
 	.smp_boot_secondary	= rockchip_boot_secondary,
@@ -349,4 +369,5 @@  static struct smp_operations rockchip_smp_ops __initdata = {
 #endif
 };
 
+CPU_METHOD_OF_DECLARE(rk3036_smp, "rockchip,rk3036-smp", &rk3036_smp_ops);
 CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops);