diff mbox

[v6,05/17] drm: bridge: analogix/dp: dynamic parse sync_pol & interlace & dynamic_range

Message ID 1444491961-26799-1-git-send-email-ykk@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Yakir Yang Oct. 10, 2015, 3:46 p.m. UTC
Both hsync/vsync polarity and interlace mode can be parsed from
drm display mode, and dynamic_range and ycbcr_coeff can be judge
by the video code.

But presumably Exynos still relies on the DT properties, so take
good use of mode_fixup() in to achieve the compatibility hacks.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
---
Changes in v6: None
Changes in v5:
- Switch video timing type to "u32", so driver could use "of_property_read_u32"
  to get the backword timing values. Krzysztof suggest me that driver could use
  the "of_property_read_bool" to get backword timing values, but that interfacs
  would modify the original drm_display_mode timing directly (whether those
  properties exists or not).

Changes in v4:
- Provide backword compatibility with samsung. (Krzysztof)

Changes in v3:
- Dynamic parse video timing info from struct drm_display_mode and
  struct drm_display_info. (Thierry)

Changes in v2: None

 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 148 +++++++++++++--------
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.h |   8 +-
 drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c  |  14 +-
 3 files changed, 106 insertions(+), 64 deletions(-)

Comments

Krzysztof Kozlowski Oct. 12, 2015, 12:49 a.m. UTC | #1
On 12.10.2015 09:37, Yakir Yang wrote:
> Hi Krzysztof,
> 
> On 10/10/2015 11:46 PM, Yakir Yang wrote:
>> Both hsync/vsync polarity and interlace mode can be parsed from
>> drm display mode, and dynamic_range and ycbcr_coeff can be judge
>> by the video code.
>>
>> But presumably Exynos still relies on the DT properties, so take
>> good use of mode_fixup() in to achieve the compatibility hacks.
>>
>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>> ---
>> Changes in v6: None
> 
> +    of_property_read_u32(dp_node, "hsync-active-high",
> +                 &video->h_sync_polarity);
> +    of_property_read_u32(dp_node, "vsync-active-high",
> +                 &video->v_sync_polarity);
> +    of_property_read_u32(dp_node, "interlaced",
> +                 &video->interlaced);
> +}
> 
> 
> Sorry, forget to fix your previous comment here, would
> remember to fix it to v7 version, wish v6 would collect
> more comment/reviewed/ack.  :)

Right.

You can send a v7 of only this patch.

In the same time I would prefer not to chain-reply next version of
entire patchset to cover letter of previous version. It confuses me
because v6 appears UNDER v4 so I can't really find v6. I see v4 at the
top of my email list.

In the same time the patchset is quite big. Put the latest version (with
this issue above fixed!) on some repo and link it in cover letter.

Best regards,
Krzysztof

> 
> Best regards,
> - Yakir
> 
>> Changes in v5:
>> - Switch video timing type to "u32", so driver could use
>> "of_property_read_u32"
>>    to get the backword timing values. Krzysztof suggest me that driver
>> could use
>>    the "of_property_read_bool" to get backword timing values, but that
>> interfacs
>>    would modify the original drm_display_mode timing directly (whether
>> those
>>    properties exists or not).
>>
>> Changes in v4:
>> - Provide backword compatibility with samsung. (Krzysztof)
>>
>> Changes in v3:
>> - Dynamic parse video timing info from struct drm_display_mode and
>>    struct drm_display_info. (Thierry)
>>
>> Changes in v2: None
Yakir Yang Oct. 12, 2015, 2:43 a.m. UTC | #2
On 10/12/2015 08:49 AM, Krzysztof Kozlowski wrote:
> On 12.10.2015 09:37, Yakir Yang wrote:
>> Hi Krzysztof,
>>
>> On 10/10/2015 11:46 PM, Yakir Yang wrote:
>>> Both hsync/vsync polarity and interlace mode can be parsed from
>>> drm display mode, and dynamic_range and ycbcr_coeff can be judge
>>> by the video code.
>>>
>>> But presumably Exynos still relies on the DT properties, so take
>>> good use of mode_fixup() in to achieve the compatibility hacks.
>>>
>>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>>> ---
>>> Changes in v6: None
>> +    of_property_read_u32(dp_node, "hsync-active-high",
>> +                 &video->h_sync_polarity);
>> +    of_property_read_u32(dp_node, "vsync-active-high",
>> +                 &video->v_sync_polarity);
>> +    of_property_read_u32(dp_node, "interlaced",
>> +                 &video->interlaced);
>> +}
>>
>>
>> Sorry, forget to fix your previous comment here, would
>> remember to fix it to v7 version, wish v6 would collect
>> more comment/reviewed/ack.  :)
> Right.
>
> You can send a v7 of only this patch.
>
> In the same time I would prefer not to chain-reply next version of
> entire patchset to cover letter of previous version. It confuses me
> because v6 appears UNDER v4 so I can't really find v6. I see v4 at the
> top of my email list.

Okay, I wish this chain-reply would make people easy to find the
previous comments, but actually it is little mess now. I would give
up this way to send patchset  :)

> In the same time the patchset is quite big. Put the latest version (with
> this issue above fixed!) on some repo and link it in cover letter.

Yeah, it's quite big now, I would like to back the patchset to previous
format, like:

---> [PATCH v6 00/17] Cover letter
   |----> [PATCH v6 01/17]
   |----> [PATCH ......]
   |----> [PATCH v6 05/17]
      |----> [PATCH v7 05/17]
   |----> [PATCH ......]
   |----> [PATCH v6 17/17]

Is it right, and can resend the v6 to fix this chain-reply issue with
RESEND flag ([PATCH RESEND v6 ...]) ?

---> [PATCH RESEND v6 00/17] Cover letter
   |----> [PATCH RESEND v6 01/17]
   |----> [PATCH ......]
   |----> [PATCH RESEND v6 05/17]
      |----> [PATCH v7 05/17]
   |----> [PATCH ......]
   |----> [PATCH RESEND v6 17/17]


Thanks :-)
- Yakir

>
> Best regards,
> Krzysztof
>
>> Best regards,
>> - Yakir
>>
>>> Changes in v5:
>>> - Switch video timing type to "u32", so driver could use
>>> "of_property_read_u32"
>>>     to get the backword timing values. Krzysztof suggest me that driver
>>> could use
>>>     the "of_property_read_bool" to get backword timing values, but that
>>> interfacs
>>>     would modify the original drm_display_mode timing directly (whether
>>> those
>>>     properties exists or not).
>>>
>>> Changes in v4:
>>> - Provide backword compatibility with samsung. (Krzysztof)
>>>
>>> Changes in v3:
>>> - Dynamic parse video timing info from struct drm_display_mode and
>>>     struct drm_display_info. (Thierry)
>>>
>>> Changes in v2: None
>
>
>
Krzysztof Kozlowski Oct. 12, 2015, 3:51 a.m. UTC | #3
On 12.10.2015 11:43, Yakir Yang wrote:
> 
> 
> On 10/12/2015 08:49 AM, Krzysztof Kozlowski wrote:
>> On 12.10.2015 09:37, Yakir Yang wrote:
>>> Hi Krzysztof,
>>>
>>> On 10/10/2015 11:46 PM, Yakir Yang wrote:
>>>> Both hsync/vsync polarity and interlace mode can be parsed from
>>>> drm display mode, and dynamic_range and ycbcr_coeff can be judge
>>>> by the video code.
>>>>
>>>> But presumably Exynos still relies on the DT properties, so take
>>>> good use of mode_fixup() in to achieve the compatibility hacks.
>>>>
>>>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>>>> ---
>>>> Changes in v6: None
>>> +    of_property_read_u32(dp_node, "hsync-active-high",
>>> +                 &video->h_sync_polarity);
>>> +    of_property_read_u32(dp_node, "vsync-active-high",
>>> +                 &video->v_sync_polarity);
>>> +    of_property_read_u32(dp_node, "interlaced",
>>> +                 &video->interlaced);
>>> +}
>>>
>>>
>>> Sorry, forget to fix your previous comment here, would
>>> remember to fix it to v7 version, wish v6 would collect
>>> more comment/reviewed/ack.  :)
>> Right.
>>
>> You can send a v7 of only this patch.
>>
>> In the same time I would prefer not to chain-reply next version of
>> entire patchset to cover letter of previous version. It confuses me
>> because v6 appears UNDER v4 so I can't really find v6. I see v4 at the
>> top of my email list.
> 
> Okay, I wish this chain-reply would make people easy to find the
> previous comments, but actually it is little mess now. I would give
> up this way to send patchset  :)
> 
>> In the same time the patchset is quite big. Put the latest version (with
>> this issue above fixed!) on some repo and link it in cover letter.
> 
> Yeah, it's quite big now, I would like to back the patchset to previous
> format, like:
> 
> ---> [PATCH v6 00/17] Cover letter
>   |----> [PATCH v6 01/17]
>   |----> [PATCH ......]
>   |----> [PATCH v6 05/17]
>      |----> [PATCH v7 05/17]
>   |----> [PATCH ......]
>   |----> [PATCH v6 17/17]
> 
> Is it right, and can resend the v6 to fix this chain-reply issue with
> RESEND flag ([PATCH RESEND v6 ...]) ?
> 
> ---> [PATCH RESEND v6 00/17] Cover letter
>   |----> [PATCH RESEND v6 01/17]
>   |----> [PATCH ......]
>   |----> [PATCH RESEND v6 05/17]
>      |----> [PATCH v7 05/17]
>   |----> [PATCH ......]
>   |----> [PATCH RESEND v6 17/17]
> 

No, don't resend everything. I mean in this case with such big patchset
if you want to fix one patch just send one email [PATCH v7 05/17]
chained to proper id (cover letter or v6-05/17). Add a short note that
this is resend of only one patch from the set.

Of course you can just wait for some more comments and then send v7 of
everything.

Best regards,
Krzysztof
Yakir Yang Oct. 12, 2015, 4:09 a.m. UTC | #4
On 10/12/2015 11:51 AM, Krzysztof Kozlowski wrote:
> On 12.10.2015 11:43, Yakir Yang wrote:
>> On 10/12/2015 08:49 AM, Krzysztof Kozlowski wrote:
>>> On 12.10.2015 09:37, Yakir Yang wrote:
>>>> Hi Krzysztof,
>>>>
>>>> On 10/10/2015 11:46 PM, Yakir Yang wrote:
>>>>> Both hsync/vsync polarity and interlace mode can be parsed from
>>>>> drm display mode, and dynamic_range and ycbcr_coeff can be judge
>>>>> by the video code.
>>>>>
>>>>> But presumably Exynos still relies on the DT properties, so take
>>>>> good use of mode_fixup() in to achieve the compatibility hacks.
>>>>>
>>>>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>>>>> ---
>>>>> Changes in v6: None
>>>> +    of_property_read_u32(dp_node, "hsync-active-high",
>>>> +                 &video->h_sync_polarity);
>>>> +    of_property_read_u32(dp_node, "vsync-active-high",
>>>> +                 &video->v_sync_polarity);
>>>> +    of_property_read_u32(dp_node, "interlaced",
>>>> +                 &video->interlaced);
>>>> +}
>>>>
>>>>
>>>> Sorry, forget to fix your previous comment here, would
>>>> remember to fix it to v7 version, wish v6 would collect
>>>> more comment/reviewed/ack.  :)
>>> Right.
>>>
>>> You can send a v7 of only this patch.
>>>
>>> In the same time I would prefer not to chain-reply next version of
>>> entire patchset to cover letter of previous version. It confuses me
>>> because v6 appears UNDER v4 so I can't really find v6. I see v4 at the
>>> top of my email list.
>> Okay, I wish this chain-reply would make people easy to find the
>> previous comments, but actually it is little mess now. I would give
>> up this way to send patchset  :)
>>
>>> In the same time the patchset is quite big. Put the latest version (with
>>> this issue above fixed!) on some repo and link it in cover letter.
>> Yeah, it's quite big now, I would like to back the patchset to previous
>> format, like:
>>
>> ---> [PATCH v6 00/17] Cover letter
>>    |----> [PATCH v6 01/17]
>>    |----> [PATCH ......]
>>    |----> [PATCH v6 05/17]
>>       |----> [PATCH v7 05/17]
>>    |----> [PATCH ......]
>>    |----> [PATCH v6 17/17]
>>
>> Is it right, and can resend the v6 to fix this chain-reply issue with
>> RESEND flag ([PATCH RESEND v6 ...]) ?
>>
>> ---> [PATCH RESEND v6 00/17] Cover letter
>>    |----> [PATCH RESEND v6 01/17]
>>    |----> [PATCH ......]
>>    |----> [PATCH RESEND v6 05/17]
>>       |----> [PATCH v7 05/17]
>>    |----> [PATCH ......]
>>    |----> [PATCH RESEND v6 17/17]
>>
> No, don't resend everything. I mean in this case with such big patchset
> if you want to fix one patch just send one email [PATCH v7 05/17]
> chained to proper id (cover letter or v6-05/17). Add a short note that
> this is resend of only one patch from the set.

Oh, understand now, just keep this chain-reply no changes for now.

----> [PATCH v4 00/16] Cover letter
    |----> [PATCH v5 00/17] Covert letter
    |----> [PATCH ......]
    |
    |----> [PATCH v6 00/17] Covert letter
    |----> [PATCH v6 01/17]
    |----> [PATCH ......]
    |----> [PATCH v6 17/17]
    |----> [PATCH v7 05/17]


> Of course you can just wait for some more comments and then send v7 of
> everything.

I would choice to send it now :)

Thanks,
- Yakir

> Best regards,
> Krzysztof
>
>
>
>
Krzysztof Kozlowski Oct. 12, 2015, 4:16 a.m. UTC | #5
On 12.10.2015 13:09, Yakir Yang wrote:
> 
> 
> On 10/12/2015 11:51 AM, Krzysztof Kozlowski wrote:
>> On 12.10.2015 11:43, Yakir Yang wrote:
>>> On 10/12/2015 08:49 AM, Krzysztof Kozlowski wrote:
>>>> On 12.10.2015 09:37, Yakir Yang wrote:
>>>>> Hi Krzysztof,
>>>>>
>>>>> On 10/10/2015 11:46 PM, Yakir Yang wrote:
>>>>>> Both hsync/vsync polarity and interlace mode can be parsed from
>>>>>> drm display mode, and dynamic_range and ycbcr_coeff can be judge
>>>>>> by the video code.
>>>>>>
>>>>>> But presumably Exynos still relies on the DT properties, so take
>>>>>> good use of mode_fixup() in to achieve the compatibility hacks.
>>>>>>
>>>>>> Signed-off-by: Yakir Yang <ykk@rock-chips.com>
>>>>>> ---
>>>>>> Changes in v6: None
>>>>> +    of_property_read_u32(dp_node, "hsync-active-high",
>>>>> +                 &video->h_sync_polarity);
>>>>> +    of_property_read_u32(dp_node, "vsync-active-high",
>>>>> +                 &video->v_sync_polarity);
>>>>> +    of_property_read_u32(dp_node, "interlaced",
>>>>> +                 &video->interlaced);
>>>>> +}
>>>>>
>>>>>
>>>>> Sorry, forget to fix your previous comment here, would
>>>>> remember to fix it to v7 version, wish v6 would collect
>>>>> more comment/reviewed/ack.  :)
>>>> Right.
>>>>
>>>> You can send a v7 of only this patch.
>>>>
>>>> In the same time I would prefer not to chain-reply next version of
>>>> entire patchset to cover letter of previous version. It confuses me
>>>> because v6 appears UNDER v4 so I can't really find v6. I see v4 at the
>>>> top of my email list.
>>> Okay, I wish this chain-reply would make people easy to find the
>>> previous comments, but actually it is little mess now. I would give
>>> up this way to send patchset  :)
>>>
>>>> In the same time the patchset is quite big. Put the latest version
>>>> (with
>>>> this issue above fixed!) on some repo and link it in cover letter.
>>> Yeah, it's quite big now, I would like to back the patchset to previous
>>> format, like:
>>>
>>> ---> [PATCH v6 00/17] Cover letter
>>>    |----> [PATCH v6 01/17]
>>>    |----> [PATCH ......]
>>>    |----> [PATCH v6 05/17]
>>>       |----> [PATCH v7 05/17]
>>>    |----> [PATCH ......]
>>>    |----> [PATCH v6 17/17]
>>>
>>> Is it right, and can resend the v6 to fix this chain-reply issue with
>>> RESEND flag ([PATCH RESEND v6 ...]) ?
>>>
>>> ---> [PATCH RESEND v6 00/17] Cover letter
>>>    |----> [PATCH RESEND v6 01/17]
>>>    |----> [PATCH ......]
>>>    |----> [PATCH RESEND v6 05/17]
>>>       |----> [PATCH v7 05/17]
>>>    |----> [PATCH ......]
>>>    |----> [PATCH RESEND v6 17/17]
>>>
>> No, don't resend everything. I mean in this case with such big patchset
>> if you want to fix one patch just send one email [PATCH v7 05/17]
>> chained to proper id (cover letter or v6-05/17). Add a short note that
>> this is resend of only one patch from the set.
> 
> Oh, understand now, just keep this chain-reply no changes for now.
> 
> ----> [PATCH v4 00/16] Cover letter
>    |----> [PATCH v5 00/17] Covert letter
>    |----> [PATCH ......]
>    |
>    |----> [PATCH v6 00/17] Covert letter
>    |----> [PATCH v6 01/17]
>    |----> [PATCH ......]
>    |----> [PATCH v6 17/17]
>    |----> [PATCH v7 05/17]

Yes, I think it is correct. Maybe just add a note (in patch changelog)
that this is v7 of only fifth patch.

Best regards,
Krzysztof
diff mbox

Patch

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 96afb67..9d802ef 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -890,8 +890,8 @@  static void analogix_dp_commit(struct analogix_dp_device *dp)
 		return;
 	}
 
-	ret = analogix_dp_set_link_train(dp, dp->video_info->lane_count,
-					 dp->video_info->link_rate);
+	ret = analogix_dp_set_link_train(dp, dp->video_info.lane_count,
+					 dp->video_info.link_rate);
 	if (ret) {
 		dev_err(dp->dev, "unable to do link train\n");
 		return;
@@ -1030,6 +1030,85 @@  static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
 	dp->dpms_mode = DRM_MODE_DPMS_OFF;
 }
 
+static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge,
+					struct drm_display_mode *orig_mode,
+					struct drm_display_mode *mode)
+{
+	struct analogix_dp_device *dp = bridge->driver_private;
+	struct drm_display_info *display_info = &dp->connector->display_info;
+	struct video_info *video = &dp->video_info;
+	struct device_node *dp_node = dp->dev->of_node;
+	int vic;
+
+	/* Input video interlaces & hsync pol & vsync pol */
+	video->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
+	video->v_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NVSYNC);
+	video->h_sync_polarity = !!(mode->flags & DRM_MODE_FLAG_NHSYNC);
+
+	/* Input video dynamic_range & colorimetry */
+	vic = drm_match_cea_mode(mode);
+	if ((vic == 6) || (vic == 7) || (vic == 21) || (vic == 22) ||
+	    (vic == 2) || (vic == 3) || (vic == 17) || (vic == 18)) {
+		video->dynamic_range = CEA;
+		video->ycbcr_coeff = COLOR_YCBCR601;
+	} else if (vic) {
+		video->dynamic_range = CEA;
+		video->ycbcr_coeff = COLOR_YCBCR709;
+	} else {
+		video->dynamic_range = VESA;
+		video->ycbcr_coeff = COLOR_YCBCR709;
+	}
+
+	/* Input vide bpc and color_formats */
+	switch (display_info->bpc) {
+	case 12:
+		video->color_depth = COLOR_12;
+		break;
+	case 10:
+		video->color_depth = COLOR_10;
+		break;
+	case 8:
+		video->color_depth = COLOR_8;
+		break;
+	case 6:
+		video->color_depth = COLOR_6;
+		break;
+	default:
+		video->color_depth = COLOR_8;
+		break;
+	}
+	if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB444)
+		video->color_space = COLOR_YCBCR444;
+	else if (display_info->color_formats & DRM_COLOR_FORMAT_YCRCB422)
+		video->color_space = COLOR_YCBCR422;
+	else if (display_info->color_formats & DRM_COLOR_FORMAT_RGB444)
+		video->color_space = COLOR_RGB;
+	else
+		video->color_space = COLOR_RGB;
+
+	/*
+	 * NOTE: those property parsing code is used for providing backward
+	 * compatibility for samsung platform.
+	 * Due to we used the "of_property_read_u32" interfaces, when this
+	 * property isn't present, the "video_info" can keep the original
+	 * values and wouldn't be modified.
+	 */
+	of_property_read_u32(dp_node, "samsung,color-space",
+			     &video->color_space);
+	of_property_read_u32(dp_node, "samsung,dynamic-range",
+			     &video->dynamic_range);
+	of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
+			     &video->ycbcr_coeff);
+	of_property_read_u32(dp_node, "samsung,color-depth",
+			     &video->color_depth);
+	of_property_read_u32(dp_node, "hsync-active-high",
+			     &video->h_sync_polarity);
+	of_property_read_u32(dp_node, "vsync-active-high",
+			     &video->v_sync_polarity);
+	of_property_read_u32(dp_node, "interlaced",
+			     &video->interlaced);
+}
+
 static void analogix_dp_bridge_nop(struct drm_bridge *bridge)
 {
 	/* do nothing */
@@ -1040,6 +1119,7 @@  static const struct drm_bridge_funcs analogix_dp_bridge_funcs = {
 	.disable = analogix_dp_bridge_disable,
 	.pre_enable = analogix_dp_bridge_nop,
 	.post_disable = analogix_dp_bridge_nop,
+	.mode_set = analogix_dp_bridge_mode_set,
 	.attach = analogix_dp_bridge_attach,
 };
 
@@ -1071,62 +1151,24 @@  static int analogix_dp_create_bridge(struct drm_device *drm_dev,
 	return 0;
 }
 
-static struct video_info *analogix_dp_dt_parse_pdata(struct device *dev)
+static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp)
 {
-	struct device_node *dp_node = dev->of_node;
-	struct video_info *dp_video_config;
-
-	dp_video_config = devm_kzalloc(dev, sizeof(*dp_video_config),
-				       GFP_KERNEL);
-	if (!dp_video_config)
-		return ERR_PTR(-ENOMEM);
-
-	dp_video_config->h_sync_polarity =
-		of_property_read_bool(dp_node, "hsync-active-high");
-
-	dp_video_config->v_sync_polarity =
-		of_property_read_bool(dp_node, "vsync-active-high");
-
-	dp_video_config->interlaced =
-		of_property_read_bool(dp_node, "interlaced");
-
-	if (of_property_read_u32(dp_node, "samsung,color-space",
-				 &dp_video_config->color_space)) {
-		dev_err(dev, "failed to get color-space\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (of_property_read_u32(dp_node, "samsung,dynamic-range",
-				 &dp_video_config->dynamic_range)) {
-		dev_err(dev, "failed to get dynamic-range\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (of_property_read_u32(dp_node, "samsung,ycbcr-coeff",
-				 &dp_video_config->ycbcr_coeff)) {
-		dev_err(dev, "failed to get ycbcr-coeff\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (of_property_read_u32(dp_node, "samsung,color-depth",
-				 &dp_video_config->color_depth)) {
-		dev_err(dev, "failed to get color-depth\n");
-		return ERR_PTR(-EINVAL);
-	}
+	struct device_node *dp_node = dp->dev->of_node;
+	struct video_info *video_info = &dp->video_info;
 
 	if (of_property_read_u32(dp_node, "samsung,link-rate",
-				 &dp_video_config->link_rate)) {
-		dev_err(dev, "failed to get link-rate\n");
-		return ERR_PTR(-EINVAL);
+				 &video_info->link_rate)) {
+		dev_err(dp->dev, "failed to get link-rate\n");
+		return -EINVAL;
 	}
 
 	if (of_property_read_u32(dp_node, "samsung,lane-count",
-				 &dp_video_config->lane_count)) {
-		dev_err(dev, "failed to get lane-count\n");
-		return ERR_PTR(-EINVAL);
+				 &video_info->lane_count)) {
+		dev_err(dp->dev, "failed to get lane-count\n");
+		return -EINVAL;
 	}
 
-	return dp_video_config;
+	return 0;
 }
 
 int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
@@ -1159,9 +1201,9 @@  int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 	 */
 	dp->plat_data = plat_data;
 
-	dp->video_info = analogix_dp_dt_parse_pdata(&pdev->dev);
-	if (IS_ERR(dp->video_info))
-		return PTR_ERR(dp->video_info);
+	ret = analogix_dp_dt_parse_pdata(dp);
+	if (ret)
+		return ret;
 
 	dp->phy = devm_phy_get(dp->dev, "dp");
 	if (IS_ERR(dp->phy)) {
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 9a90a18..730486d 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -120,9 +120,9 @@  enum dp_irq_type {
 struct video_info {
 	char *name;
 
-	bool h_sync_polarity;
-	bool v_sync_polarity;
-	bool interlaced;
+	u32 h_sync_polarity;
+	u32 v_sync_polarity;
+	u32 interlaced;
 
 	enum color_space color_space;
 	enum dynamic_range dynamic_range;
@@ -154,7 +154,7 @@  struct analogix_dp_device {
 	unsigned int		irq;
 	void __iomem		*reg_base;
 
-	struct video_info	*video_info;
+	struct video_info	video_info;
 	struct link_train	link_train;
 	struct work_struct	hotplug_work;
 	struct phy		*phy;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index a388c0a..861097a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -1084,15 +1084,15 @@  void analogix_dp_set_video_color_format(struct analogix_dp_device *dp)
 	u32 reg;
 
 	/* Configure the input color depth, color space, dynamic range */
-	reg = (dp->video_info->dynamic_range << IN_D_RANGE_SHIFT) |
-		(dp->video_info->color_depth << IN_BPC_SHIFT) |
-		(dp->video_info->color_space << IN_COLOR_F_SHIFT);
+	reg = (dp->video_info.dynamic_range << IN_D_RANGE_SHIFT) |
+		(dp->video_info.color_depth << IN_BPC_SHIFT) |
+		(dp->video_info.color_space << IN_COLOR_F_SHIFT);
 	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_2);
 
 	/* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
 	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
 	reg &= ~IN_YC_COEFFI_MASK;
-	if (dp->video_info->ycbcr_coeff)
+	if (dp->video_info.ycbcr_coeff)
 		reg |= IN_YC_COEFFI_ITU709;
 	else
 		reg |= IN_YC_COEFFI_ITU601;
@@ -1229,17 +1229,17 @@  void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp)
 
 	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
 	reg &= ~INTERACE_SCAN_CFG;
-	reg |= (dp->video_info->interlaced << 2);
+	reg |= (dp->video_info.interlaced << 2);
 	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
 
 	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
 	reg &= ~VSYNC_POLARITY_CFG;
-	reg |= (dp->video_info->v_sync_polarity << 1);
+	reg |= (dp->video_info.v_sync_polarity << 1);
 	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
 
 	reg = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
 	reg &= ~HSYNC_POLARITY_CFG;
-	reg |= (dp->video_info->h_sync_polarity << 0);
+	reg |= (dp->video_info.h_sync_polarity << 0);
 	writel(reg, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_10);
 
 	reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;