Input: add support for ROHM BU21023/24 touchscreen
diff mbox

Message ID 20151023163733.8ae9b64fadfd130520caa973@linux-mips.org
State New
Headers show

Commit Message

Yoichi Yuasa Oct. 23, 2015, 7:37 a.m. UTC
Already merged in git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git

This adds support for ROHM BU21023/24 Dual touch resistive touchscreens.

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/touchscreen/Kconfig        |   11 +
 drivers/input/touchscreen/Makefile       |    1 +
 drivers/input/touchscreen/rohm_bu21023.c | 1218 ++++++++++++++++++++++++++++++
 3 files changed, 1230 insertions(+)
 create mode 100644 drivers/input/touchscreen/rohm_bu21023.c

Comments

Greg KH Nov. 28, 2015, 1:45 a.m. UTC | #1
On Fri, Oct 23, 2015 at 04:37:33PM +0900, Yoichi Yuasa wrote:
> Already merged in git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
> 
> This adds support for ROHM BU21023/24 Dual touch resistive touchscreens.
> 
> Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
>  drivers/input/touchscreen/Kconfig        |   11 +
>  drivers/input/touchscreen/Makefile       |    1 +
>  drivers/input/touchscreen/rohm_bu21023.c | 1218 ++++++++++++++++++++++++++++++
>  3 files changed, 1230 insertions(+)
>  create mode 100644 drivers/input/touchscreen/rohm_bu21023.c

Applied, thanks.

greg k-h

Patch
diff mbox

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 80f6386..38c93d3 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1027,4 +1027,15 @@  config TOUCHSCREEN_ZFORCE
 	  To compile this driver as a module, choose M here: the
 	  module will be called zforce_ts.
 
+config TOUCHSCREEN_ROHM_BU21023
+	tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a touchscreen using ROHM BU21023/24.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bu21023_ts.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 44deea7..5c92639 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -84,3 +84,4 @@  obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
 obj-$(CONFIG_TOUCHSCREEN_SX8654)	+= sx8654.o
 obj-$(CONFIG_TOUCHSCREEN_TPS6507X)	+= tps6507x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_ZFORCE)	+= zforce_ts.o
+obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023)	+= rohm_bu21023.o
diff --git a/drivers/input/touchscreen/rohm_bu21023.c b/drivers/input/touchscreen/rohm_bu21023.c
new file mode 100644
index 0000000..ba6024f
--- /dev/null
+++ b/drivers/input/touchscreen/rohm_bu21023.c
@@ -0,0 +1,1218 @@ 
+/*
+ * ROHM BU21023/24 Dual touch support resistive touch screen driver
+ * Copyright (C) 2012 ROHM CO.,LTD.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define BU21023_NAME			"bu21023_ts"
+#define BU21023_FIRMWARE_NAME		"bu21023.bin"
+
+#define MAX_CONTACTS			2
+
+#define AXIS_ADJUST			4
+#define AXIS_OFFSET			8
+
+#define FIRMWARE_BLOCK_SIZE		32U
+#define FIRMWARE_RETRY_MAX		4
+
+#define SAMPLING_DELAY			12	/* msec */
+
+#define CALIBRATION_RETRY_MAX		6
+
+#define ROHM_TS_ABS_X_MIN		40
+#define ROHM_TS_ABS_X_MAX		990
+#define ROHM_TS_ABS_Y_MIN		160
+#define ROHM_TS_ABS_Y_MAX		920
+#define ROHM_TS_DISPLACEMENT_MAX	0	/* zero for infinite */
+
+/*
+ * BU21023GUL/BU21023MUV/BU21024FV-M registers map
+ */
+#define VADOUT_YP_H		0x00
+#define VADOUT_YP_L		0x01
+#define VADOUT_XP_H		0x02
+#define VADOUT_XP_L		0x03
+#define VADOUT_YN_H		0x04
+#define VADOUT_YN_L		0x05
+#define VADOUT_XN_H		0x06
+#define VADOUT_XN_L		0x07
+
+#define PRM1_X_H		0x08
+#define PRM1_X_L		0x09
+#define PRM1_Y_H		0x0a
+#define PRM1_Y_L		0x0b
+#define PRM2_X_H		0x0c
+#define PRM2_X_L		0x0d
+#define PRM2_Y_H		0x0e
+#define PRM2_Y_L		0x0f
+
+#define MLT_PRM_MONI_X		0x10
+#define MLT_PRM_MONI_Y		0x11
+
+#define DEBUG_MONI_1		0x12
+#define DEBUG_MONI_2		0x13
+
+#define VADOUT_ZX_H		0x14
+#define VADOUT_ZX_L		0x15
+#define VADOUT_ZY_H		0x16
+#define VADOUT_ZY_L		0x17
+
+#define Z_PARAM_H		0x18
+#define Z_PARAM_L		0x19
+
+/*
+ * Value for VADOUT_*_L
+ */
+#define VADOUT_L_MASK		0x01
+
+/*
+ * Value for PRM*_*_L
+ */
+#define PRM_L_MASK		0x01
+
+#define POS_X1_H		0x20
+#define POS_X1_L		0x21
+#define POS_Y1_H		0x22
+#define POS_Y1_L		0x23
+#define POS_X2_H		0x24
+#define POS_X2_L		0x25
+#define POS_Y2_H		0x26
+#define POS_Y2_L		0x27
+
+/*
+ * Value for POS_*_L
+ */
+#define POS_L_MASK		0x01
+
+#define TOUCH			0x28
+#define TOUCH_DETECT		0x01
+
+#define TOUCH_GESTURE		0x29
+#define SINGLE_TOUCH		0x01
+#define DUAL_TOUCH		0x03
+#define TOUCH_MASK		0x03
+#define CALIBRATION_REQUEST	0x04
+#define CALIBRATION_STATUS	0x08
+#define CALIBRATION_MASK	0x0c
+#define GESTURE_SPREAD		0x10
+#define GESTURE_PINCH		0x20
+#define GESTURE_ROTATE_R	0x40
+#define GESTURE_ROTATE_L	0x80
+
+#define INT_STATUS		0x2a
+#define INT_MASK		0x3d
+#define INT_CLEAR		0x3e
+
+/*
+ * Values for INT_*
+ */
+#define COORD_UPDATE		0x01
+#define CALIBRATION_DONE	0x02
+#define SLEEP_IN		0x04
+#define SLEEP_OUT		0x08
+#define PROGRAM_LOAD_DONE	0x10
+#define ERROR			0x80
+#define INT_ALL			0x9f
+
+#define ERR_STATUS		0x2b
+#define ERR_MASK		0x3f
+
+/*
+ * Values for ERR_*
+ */
+#define ADC_TIMEOUT		0x01
+#define CPU_TIMEOUT		0x02
+#define CALIBRATION_ERR		0x04
+#define PROGRAM_LOAD_ERR	0x10
+
+#define COMMON_SETUP1			0x30
+#define PROGRAM_LOAD_HOST		0x02
+#define PROGRAM_LOAD_EEPROM		0x03
+#define CENSOR_4PORT			0x04
+#define CENSOR_8PORT			0x00	/* Not supported by BU21023 */
+#define CALIBRATION_TYPE_DEFAULT	0x08
+#define CALIBRATION_TYPE_SPECIAL	0x00
+#define INT_ACTIVE_HIGH			0x10
+#define INT_ACTIVE_LOW			0x00
+#define AUTO_CALIBRATION		0x40
+#define MANUAL_CALIBRATION		0x00
+#define COMMON_SETUP1_DEFAULT		0x4e
+
+#define COMMON_SETUP2		0x31
+#define MAF_NONE		0x00
+#define MAF_1SAMPLE		0x01
+#define MAF_3SAMPLES		0x02
+#define MAF_5SAMPLES		0x03
+#define INV_Y			0x04
+#define INV_X			0x08
+#define SWAP_XY			0x10
+
+#define COMMON_SETUP3		0x32
+#define EN_SLEEP		0x01
+#define EN_MULTI		0x02
+#define EN_GESTURE		0x04
+#define EN_INTVL		0x08
+#define SEL_STEP		0x10
+#define SEL_MULTI		0x20
+#define SEL_TBL_DEFAULT		0x40
+
+#define INTERVAL_TIME		0x33
+#define INTERVAL_TIME_DEFAULT	0x10
+
+#define STEP_X			0x34
+#define STEP_X_DEFAULT		0x41
+
+#define STEP_Y			0x35
+#define STEP_Y_DEFAULT		0x8d
+
+#define OFFSET_X		0x38
+#define OFFSET_X_DEFAULT	0x0c
+
+#define OFFSET_Y		0x39
+#define OFFSET_Y_DEFAULT	0x0c
+
+#define THRESHOLD_TOUCH		0x3a
+#define THRESHOLD_TOUCH_DEFAULT	0xa0
+
+#define THRESHOLD_GESTURE		0x3b
+#define THRESHOLD_GESTURE_DEFAULT	0x17
+
+#define SYSTEM			0x40
+#define ANALOG_POWER_ON		0x01
+#define ANALOG_POWER_OFF	0x00
+#define CPU_POWER_ON		0x02
+#define CPU_POWER_OFF		0x00
+
+#define FORCE_CALIBRATION	0x42
+#define FORCE_CALIBRATION_ON	0x01
+#define FORCE_CALIBRATION_OFF	0x00
+
+#define CPU_FREQ		0x50	/* 10 / (reg + 1) MHz */
+#define CPU_FREQ_10MHZ		0x00
+#define CPU_FREQ_5MHZ		0x01
+#define CPU_FREQ_1MHZ		0x09
+
+#define EEPROM_ADDR		0x51
+
+#define CALIBRATION_ADJUST		0x52
+#define CALIBRATION_ADJUST_DEFAULT	0x00
+
+#define THRESHOLD_SLEEP_IN	0x53
+
+#define EVR_XY			0x56
+#define EVR_XY_DEFAULT		0x10
+
+#define PRM_SWOFF_TIME		0x57
+#define PRM_SWOFF_TIME_DEFAULT	0x04
+
+#define PROGRAM_VERSION		0x5f
+
+#define ADC_CTRL		0x60
+#define ADC_DIV_MASK		0x1f	/* The minimum value is 4 */
+#define ADC_DIV_DEFAULT		0x08
+
+#define ADC_WAIT		0x61
+#define ADC_WAIT_DEFAULT	0x0a
+
+#define SWCONT			0x62
+#define SWCONT_DEFAULT		0x0f
+
+#define EVR_X			0x63
+#define EVR_X_DEFAULT		0x86
+
+#define EVR_Y			0x64
+#define EVR_Y_DEFAULT		0x64
+
+#define TEST1			0x65
+#define DUALTOUCH_STABILIZE_ON	0x01
+#define DUALTOUCH_STABILIZE_OFF	0x00
+#define DUALTOUCH_REG_ON	0x20
+#define DUALTOUCH_REG_OFF	0x00
+
+#define CALIBRATION_REG1		0x68
+#define CALIBRATION_REG1_DEFAULT	0xd9
+
+#define CALIBRATION_REG2		0x69
+#define CALIBRATION_REG2_DEFAULT	0x36
+
+#define CALIBRATION_REG3		0x6a
+#define CALIBRATION_REG3_DEFAULT	0x32
+
+#define EX_ADDR_H		0x70
+#define EX_ADDR_L		0x71
+#define EX_WDAT			0x72
+#define EX_RDAT			0x73
+#define EX_CHK_SUM1		0x74
+#define EX_CHK_SUM2		0x75
+#define EX_CHK_SUM3		0x76
+
+struct rohm_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+
+	bool initialized;
+
+	unsigned int contact_count[MAX_CONTACTS + 1];
+	int finger_count;
+
+	u8 setup2;
+};
+
+/*
+ * rohm_i2c_burst_read - execute combined I2C message for ROHM BU21023/24
+ * @client: Handle to ROHM BU21023/24
+ * @start: Where to start read address from ROHM BU21023/24
+ * @buf: Where to store read data from ROHM BU21023/24
+ * @len: How many bytes to read
+ *
+ * Returns negative errno, else zero on success.
+ *
+ * Note
+ * In BU21023/24 burst read, stop condition is needed after "address write".
+ * Therefore, transmission is performed in 2 steps.
+ */
+static int rohm_i2c_burst_read(struct i2c_client *client, u8 start, void *buf,
+			       size_t len)
+{
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_msg msg[2];
+	int i, ret = 0;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = &start;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = len;
+	msg[1].buf = buf;
+
+	i2c_lock_adapter(adap);
+
+	for (i = 0; i < 2; i++) {
+		if (__i2c_transfer(adap, &msg[i], 1) < 0) {
+			ret = -EIO;
+			break;
+		}
+	}
+
+	i2c_unlock_adapter(adap);
+
+	return ret;
+}
+
+static int rohm_ts_manual_calibration(struct rohm_ts_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	struct device *dev = &client->dev;
+	u8 buf[33];	/* for PRM1_X_H(0x08)-TOUCH(0x28) */
+
+	int retry;
+	bool success = false;
+	bool first_time = true;
+	bool calibration_done;
+
+	u8 reg1, reg2, reg3;
+	s32 reg1_orig, reg2_orig, reg3_orig;
+	s32 val;
+
+	int calib_x = 0, calib_y = 0;
+	int reg_x, reg_y;
+	int err_x, err_y;
+
+	int error, error2;
+	int i;
+
+	reg1_orig = i2c_smbus_read_byte_data(client, CALIBRATION_REG1);
+	if (reg1_orig < 0)
+		return reg1_orig;
+
+	reg2_orig = i2c_smbus_read_byte_data(client, CALIBRATION_REG2);
+	if (reg2_orig < 0)
+		return reg2_orig;
+
+	reg3_orig = i2c_smbus_read_byte_data(client, CALIBRATION_REG3);
+	if (reg3_orig < 0)
+		return reg3_orig;
+
+	error = i2c_smbus_write_byte_data(client, INT_MASK,
+					  COORD_UPDATE | SLEEP_IN | SLEEP_OUT |
+					  PROGRAM_LOAD_DONE);
+	if (error)
+		goto out;
+
+	error = i2c_smbus_write_byte_data(client, TEST1,
+					  DUALTOUCH_STABILIZE_ON);
+	if (error)
+		goto out;
+
+	for (retry = 0; retry < CALIBRATION_RETRY_MAX; retry++) {
+		/* wait 2 sampling for update */
+		mdelay(2 * SAMPLING_DELAY);
+
+#define READ_CALIB_BUF(reg)	buf[((reg) - PRM1_X_H)]
+
+		error = rohm_i2c_burst_read(client, PRM1_X_H, buf, sizeof(buf));
+		if (error)
+			goto out;
+
+		if (READ_CALIB_BUF(TOUCH) & TOUCH_DETECT)
+			continue;
+
+		if (first_time) {
+			/* generate calibration parameter */
+			calib_x = ((int)READ_CALIB_BUF(PRM1_X_H) << 2 |
+				READ_CALIB_BUF(PRM1_X_L)) - AXIS_OFFSET;
+			calib_y = ((int)READ_CALIB_BUF(PRM1_Y_H) << 2 |
+				READ_CALIB_BUF(PRM1_Y_L)) - AXIS_OFFSET;
+
+			error = i2c_smbus_write_byte_data(client, TEST1,
+				DUALTOUCH_STABILIZE_ON | DUALTOUCH_REG_ON);
+			if (error)
+				goto out;
+
+			first_time = false;
+		} else {
+			/* generate adjustment parameter */
+			err_x = (int)READ_CALIB_BUF(PRM1_X_H) << 2 |
+				READ_CALIB_BUF(PRM1_X_L);
+			err_y = (int)READ_CALIB_BUF(PRM1_Y_H) << 2 |
+				READ_CALIB_BUF(PRM1_Y_L);
+
+			/* X axis ajust */
+			if (err_x <= 4)
+				calib_x -= AXIS_ADJUST;
+			else if (err_x >= 60)
+				calib_x += AXIS_ADJUST;
+
+			/* Y axis ajust */
+			if (err_y <= 4)
+				calib_y -= AXIS_ADJUST;
+			else if (err_y >= 60)
+				calib_y += AXIS_ADJUST;
+		}
+
+		/* generate calibration setting value */
+		reg_x = calib_x + ((calib_x & 0x200) << 1);
+		reg_y = calib_y + ((calib_y & 0x200) << 1);
+
+		/* convert for register format */
+		reg1 = reg_x >> 3;
+		reg2 = (reg_y & 0x7) << 4 | (reg_x & 0x7);
+		reg3 = reg_y >> 3;
+
+		error = i2c_smbus_write_byte_data(client,
+						  CALIBRATION_REG1, reg1);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client,
+						  CALIBRATION_REG2, reg2);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client,
+						  CALIBRATION_REG3, reg3);
+		if (error)
+			goto out;
+
+		/*
+		 * force calibration sequcence
+		 */
+		error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+						  FORCE_CALIBRATION_OFF);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+						  FORCE_CALIBRATION_ON);
+		if (error)
+			goto out;
+
+		/* clear all interrupts */
+		error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+		if (error)
+			goto out;
+
+		/*
+		 * Wait for the status change of calibration, max 10 sampling
+		 */
+		calibration_done = false;
+
+		for (i = 0; i < 10; i++) {
+			mdelay(SAMPLING_DELAY);
+
+			val = i2c_smbus_read_byte_data(client, TOUCH_GESTURE);
+			if (!(val & CALIBRATION_MASK)) {
+				calibration_done = true;
+				break;
+			} else if (val < 0) {
+				error = val;
+				goto out;
+			}
+		}
+
+		if (calibration_done) {
+			val = i2c_smbus_read_byte_data(client, INT_STATUS);
+			if (val == CALIBRATION_DONE) {
+				success = true;
+				break;
+			} else if (val < 0) {
+				error = val;
+				goto out;
+			}
+		} else {
+			dev_warn(dev, "calibration timeout\n");
+		}
+	}
+
+	if (!success) {
+		error = i2c_smbus_write_byte_data(client, CALIBRATION_REG1,
+						  reg1_orig);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client, CALIBRATION_REG2,
+						  reg2_orig);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client, CALIBRATION_REG3,
+						  reg3_orig);
+		if (error)
+			goto out;
+
+		/* calibration data enable */
+		error = i2c_smbus_write_byte_data(client, TEST1,
+						  DUALTOUCH_STABILIZE_ON |
+						  DUALTOUCH_REG_ON);
+		if (error)
+			goto out;
+
+		/* wait 10 sampling */
+		mdelay(10 * SAMPLING_DELAY);
+
+		error = -EBUSY;
+	}
+
+out:
+	error2 = i2c_smbus_write_byte_data(client, INT_MASK, INT_ALL);
+	if (!error2)
+		/* Clear all interrupts */
+		error2 = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+
+	return error ? error : error2;
+}
+
+static const unsigned int untouch_threshold[3] = { 0, 1, 5 };
+static const unsigned int single_touch_threshold[3] = { 0, 0, 4 };
+static const unsigned int dual_touch_threshold[3] = { 10, 8, 0 };
+
+static irqreturn_t rohm_ts_soft_irq(int irq, void *dev_id)
+{
+	struct rohm_ts_data *ts = dev_id;
+	struct i2c_client *client = ts->client;
+	struct input_dev *input_dev = ts->input;
+	struct device *dev = &client->dev;
+
+	u8 buf[10];	/* for POS_X1_H(0x20)-TOUCH_GESTURE(0x29) */
+
+	struct input_mt_pos pos[MAX_CONTACTS];
+	int slots[MAX_CONTACTS];
+	u8 touch_flags;
+	unsigned int threshold;
+	int finger_count = -1;
+	int prev_finger_count = ts->finger_count;
+	int count;
+	int error;
+	int i;
+
+	error = i2c_smbus_write_byte_data(client, INT_MASK, INT_ALL);
+	if (error)
+		return IRQ_HANDLED;
+
+	/* Clear all interrupts */
+	error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+	if (error)
+		return IRQ_HANDLED;
+
+#define READ_POS_BUF(reg)	buf[((reg) - POS_X1_H)]
+
+	error = rohm_i2c_burst_read(client, POS_X1_H, buf, sizeof(buf));
+	if (error)
+		return IRQ_HANDLED;
+
+	touch_flags = READ_POS_BUF(TOUCH_GESTURE) & TOUCH_MASK;
+	if (touch_flags) {
+		/* generate coordinates */
+		pos[0].x = ((s16)READ_POS_BUF(POS_X1_H) << 2) |
+			   READ_POS_BUF(POS_X1_L);
+		pos[0].y = ((s16)READ_POS_BUF(POS_Y1_H) << 2) |
+			   READ_POS_BUF(POS_Y1_L);
+		pos[1].x = ((s16)READ_POS_BUF(POS_X2_H) << 2) |
+			   READ_POS_BUF(POS_X2_L);
+		pos[1].y = ((s16)READ_POS_BUF(POS_Y2_H) << 2) |
+			   READ_POS_BUF(POS_Y2_L);
+	}
+
+	switch (touch_flags) {
+	case 0:
+		threshold = untouch_threshold[prev_finger_count];
+		if (++ts->contact_count[0] >= threshold)
+			finger_count = 0;
+		break;
+
+	case SINGLE_TOUCH:
+		threshold = single_touch_threshold[prev_finger_count];
+		if (++ts->contact_count[1] >= threshold)
+			finger_count = 1;
+
+		if (finger_count == 1) {
+			if (pos[1].x != 0 && pos[1].y != 0) {
+				pos[0].x = pos[1].x;
+				pos[0].y = pos[1].y;
+				pos[1].x = 0;
+				pos[1].y = 0;
+			}
+		}
+		break;
+
+	case DUAL_TOUCH:
+		threshold = dual_touch_threshold[prev_finger_count];
+		if (++ts->contact_count[2] >= threshold)
+			finger_count = 2;
+		break;
+
+	default:
+		dev_dbg(dev,
+			"Three or more touches are not supported\n");
+		return IRQ_HANDLED;
+	}
+
+	if (finger_count >= 0) {
+		if (prev_finger_count != finger_count) {
+			count = ts->contact_count[finger_count];
+			memset(ts->contact_count, 0, sizeof(ts->contact_count));
+			ts->contact_count[finger_count] = count;
+		}
+
+		input_mt_assign_slots(input_dev, slots, pos,
+				      finger_count, ROHM_TS_DISPLACEMENT_MAX);
+
+		for (i = 0; i < finger_count; i++) {
+			input_mt_slot(input_dev, slots[i]);
+			input_mt_report_slot_state(input_dev,
+						   MT_TOOL_FINGER, true);
+			input_report_abs(input_dev,
+					 ABS_MT_POSITION_X, pos[i].x);
+			input_report_abs(input_dev,
+					 ABS_MT_POSITION_Y, pos[i].y);
+		}
+
+		input_mt_sync_frame(input_dev);
+		input_mt_report_pointer_emulation(input_dev, true);
+		input_sync(input_dev);
+
+		ts->finger_count = finger_count;
+	}
+
+	if (READ_POS_BUF(TOUCH_GESTURE) & CALIBRATION_REQUEST) {
+		error = rohm_ts_manual_calibration(ts);
+		if (error)
+			dev_warn(dev, "manual calibration failed: %d\n",
+				 error);
+	}
+
+	i2c_smbus_write_byte_data(client, INT_MASK,
+				  CALIBRATION_DONE | SLEEP_OUT | SLEEP_IN |
+				  PROGRAM_LOAD_DONE);
+
+	return IRQ_HANDLED;
+}
+
+static int rohm_ts_load_firmware(struct i2c_client *client,
+				 const char *firmware_name)
+{
+	struct device *dev = &client->dev;
+	const struct firmware *fw;
+	s32 status;
+	unsigned int offset, len, xfer_len;
+	unsigned int retry = 0;
+	int error, error2;
+
+	error = request_firmware(&fw, firmware_name, dev);
+	if (error) {
+		dev_err(dev, "unable to retrieve firmware %s: %d\n",
+			firmware_name, error);
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, INT_MASK,
+					  COORD_UPDATE | CALIBRATION_DONE |
+					  SLEEP_IN | SLEEP_OUT);
+	if (error)
+		goto out;
+
+	do {
+		if (retry) {
+			dev_warn(dev, "retrying firmware load\n");
+
+			/* settings for retry */
+			error = i2c_smbus_write_byte_data(client, EX_WDAT, 0);
+			if (error)
+				goto out;
+		}
+
+		error = i2c_smbus_write_byte_data(client, EX_ADDR_H, 0);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client, EX_ADDR_L, 0);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client, COMMON_SETUP1,
+						  COMMON_SETUP1_DEFAULT);
+		if (error)
+			goto out;
+
+		/* firmware load to the device */
+		offset = 0;
+		len = fw->size;
+
+		while (len) {
+			xfer_len = min(FIRMWARE_BLOCK_SIZE, len);
+
+			error = i2c_smbus_write_i2c_block_data(client, EX_WDAT,
+						xfer_len, &fw->data[offset]);
+			if (error)
+				goto out;
+
+			len -= xfer_len;
+			offset += xfer_len;
+		}
+
+		/* check firmware load result */
+		status = i2c_smbus_read_byte_data(client, INT_STATUS);
+		if (status < 0) {
+			error = status;
+			goto out;
+		}
+
+		/* clear all interrupts */
+		error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+		if (error)
+			goto out;
+
+		if (status == PROGRAM_LOAD_DONE)
+			break;
+
+		error = -EIO;
+	} while (++retry >= FIRMWARE_RETRY_MAX);
+
+out:
+	error2 = i2c_smbus_write_byte_data(client, INT_MASK, INT_ALL);
+
+	release_firmware(fw);
+
+	return error ? error : error2;
+}
+
+static ssize_t swap_xy_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%d\n", !!(ts->setup2 & SWAP_XY));
+}
+
+static ssize_t swap_xy_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 0, &val);
+	if (error)
+		return error;
+
+	error = mutex_lock_interruptible(&ts->input->mutex);
+	if (error)
+		return error;
+
+	if (val)
+		ts->setup2 |= SWAP_XY;
+	else
+		ts->setup2 &= ~SWAP_XY;
+
+	if (ts->initialized)
+		error = i2c_smbus_write_byte_data(ts->client, COMMON_SETUP2,
+						  ts->setup2);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return error ? error : count;
+}
+
+static ssize_t inv_x_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%d\n", !!(ts->setup2 & INV_X));
+}
+
+static ssize_t inv_x_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 0, &val);
+	if (error)
+		return error;
+
+	error = mutex_lock_interruptible(&ts->input->mutex);
+	if (error)
+		return error;
+
+	if (val)
+		ts->setup2 |= INV_X;
+	else
+		ts->setup2 &= ~INV_X;
+
+	if (ts->initialized)
+		error = i2c_smbus_write_byte_data(ts->client, COMMON_SETUP2,
+						  ts->setup2);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return error ? error : count;
+}
+
+static ssize_t inv_y_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%d\n", !!(ts->setup2 & INV_Y));
+}
+
+static ssize_t inv_y_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 0, &val);
+	if (error)
+		return error;
+
+	error = mutex_lock_interruptible(&ts->input->mutex);
+	if (error)
+		return error;
+
+	if (val)
+		ts->setup2 |= INV_Y;
+	else
+		ts->setup2 &= ~INV_Y;
+
+	if (ts->initialized)
+		error = i2c_smbus_write_byte_data(client, COMMON_SETUP2,
+						  ts->setup2);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return error ? error : count;
+}
+
+static DEVICE_ATTR_RW(swap_xy);
+static DEVICE_ATTR_RW(inv_x);
+static DEVICE_ATTR_RW(inv_y);
+
+static struct attribute *rohm_ts_attrs[] = {
+	&dev_attr_swap_xy.attr,
+	&dev_attr_inv_x.attr,
+	&dev_attr_inv_y.attr,
+	NULL,
+};
+
+static const struct attribute_group rohm_ts_attr_group = {
+	.attrs = rohm_ts_attrs,
+};
+
+static int rohm_ts_device_init(struct i2c_client *client, u8 setup2)
+{
+	struct device *dev = &client->dev;
+	int error;
+
+	disable_irq(client->irq);
+
+	/*
+	 * Wait 200usec for reset
+	 */
+	udelay(200);
+
+	/* Release analog reset */
+	error = i2c_smbus_write_byte_data(client, SYSTEM,
+					  ANALOG_POWER_ON | CPU_POWER_OFF);
+	if (error)
+		return error;
+
+	/* Waiting for the analog warm-up, max. 200usec */
+	udelay(200);
+
+	/* clear all interrupts */
+	error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, EX_WDAT, 0);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, COMMON_SETUP1, 0);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, COMMON_SETUP2, setup2);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, COMMON_SETUP3,
+					  SEL_TBL_DEFAULT | EN_MULTI);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, THRESHOLD_GESTURE,
+					  THRESHOLD_GESTURE_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, INTERVAL_TIME,
+					  INTERVAL_TIME_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, CPU_FREQ, CPU_FREQ_10MHZ);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, PRM_SWOFF_TIME,
+					  PRM_SWOFF_TIME_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, ADC_CTRL, ADC_DIV_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, ADC_WAIT, ADC_WAIT_DEFAULT);
+	if (error)
+		return error;
+
+	/*
+	 * Panel setup, these values change with the panel.
+	 */
+	error = i2c_smbus_write_byte_data(client, STEP_X, STEP_X_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, STEP_Y, STEP_Y_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, OFFSET_X, OFFSET_X_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, OFFSET_Y, OFFSET_Y_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, THRESHOLD_TOUCH,
+					  THRESHOLD_TOUCH_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, EVR_XY, EVR_XY_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, EVR_X, EVR_X_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, EVR_Y, EVR_Y_DEFAULT);
+	if (error)
+		return error;
+
+	/* Fixed value settings */
+	error = i2c_smbus_write_byte_data(client, CALIBRATION_ADJUST,
+					  CALIBRATION_ADJUST_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, SWCONT, SWCONT_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, TEST1,
+					  DUALTOUCH_STABILIZE_ON |
+					  DUALTOUCH_REG_ON);
+	if (error)
+		return error;
+
+	error = rohm_ts_load_firmware(client, BU21023_FIRMWARE_NAME);
+	if (error) {
+		dev_err(dev, "failed to load firmware: %d\n", error);
+		return error;
+	}
+
+	/*
+	 * Manual calibration results are not changed in same environment.
+	 * If the force calibration is performed,
+	 * the controller will not require calibration request interrupt
+	 * when the typical values are set to the calibration registers.
+	 */
+	error = i2c_smbus_write_byte_data(client, CALIBRATION_REG1,
+					  CALIBRATION_REG1_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, CALIBRATION_REG2,
+					  CALIBRATION_REG2_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, CALIBRATION_REG3,
+					  CALIBRATION_REG3_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+					  FORCE_CALIBRATION_OFF);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+					  FORCE_CALIBRATION_ON);
+	if (error)
+		return error;
+
+	/* Clear all interrupts */
+	error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+	if (error)
+		return error;
+
+	/* Enable coordinates update interrupt */
+	error = i2c_smbus_write_byte_data(client, INT_MASK,
+					  CALIBRATION_DONE | SLEEP_OUT |
+					  SLEEP_IN | PROGRAM_LOAD_DONE);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, ERR_MASK,
+					  PROGRAM_LOAD_ERR | CPU_TIMEOUT |
+					  ADC_TIMEOUT);
+	if (error)
+		return error;
+
+	/* controller CPU power on */
+	error = i2c_smbus_write_byte_data(client, SYSTEM,
+					  ANALOG_POWER_ON | CPU_POWER_ON);
+
+	enable_irq(client->irq);
+
+	return error;
+}
+
+static int rohm_ts_power_off(struct i2c_client *client)
+{
+	int error;
+
+	error = i2c_smbus_write_byte_data(client, SYSTEM,
+					  ANALOG_POWER_ON | CPU_POWER_OFF);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to power off device CPU: %d\n", error);
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, SYSTEM,
+					  ANALOG_POWER_OFF | CPU_POWER_OFF);
+	if (error)
+		dev_err(&client->dev,
+			"failed to power off the device: %d\n", error);
+
+	return error;
+}
+
+static int rohm_ts_open(struct input_dev *input_dev)
+{
+	struct rohm_ts_data *ts = input_get_drvdata(input_dev);
+	struct i2c_client *client = ts->client;
+	int error;
+
+	if (!ts->initialized) {
+		error = rohm_ts_device_init(client, ts->setup2);
+		if (error) {
+			dev_err(&client->dev,
+				"device initialization failed: %d\n", error);
+			return error;
+		}
+
+		ts->initialized = true;
+	}
+
+	return 0;
+}
+
+static void rohm_ts_close(struct input_dev *input_dev)
+{
+	struct rohm_ts_data *ts = input_get_drvdata(input_dev);
+
+	rohm_ts_power_off(ts->client);
+
+	ts->initialized = false;
+}
+
+static void rohm_ts_remove_sysfs_group(void *_dev)
+{
+	struct device *dev = _dev;
+
+	sysfs_remove_group(&dev->kobj, &rohm_ts_attr_group);
+}
+
+static int rohm_bu21023_i2c_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct rohm_ts_data *ts;
+	struct input_dev *input;
+	int error;
+
+	if (!client->irq) {
+		dev_err(dev, "IRQ is not assigned\n");
+		return -EINVAL;
+	}
+
+	if (!client->adapter->algo->master_xfer) {
+		dev_err(dev, "I2C level transfers not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	/* Turn off CPU just in case */
+	error = rohm_ts_power_off(client);
+	if (error)
+		return error;
+
+	ts = devm_kzalloc(dev, sizeof(struct rohm_ts_data), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->client = client;
+	ts->setup2 = MAF_1SAMPLE;
+	i2c_set_clientdata(client, ts);
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = BU21023_NAME;
+	input->id.bustype = BUS_I2C;
+	input->open = rohm_ts_open;
+	input->close = rohm_ts_close;
+
+	ts->input = input;
+	input_set_drvdata(input, ts);
+
+	input_set_abs_params(input, ABS_MT_POSITION_X,
+			     ROHM_TS_ABS_X_MIN, ROHM_TS_ABS_X_MAX, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y,
+			     ROHM_TS_ABS_Y_MIN, ROHM_TS_ABS_Y_MAX, 0, 0);
+
+	error = input_mt_init_slots(input, MAX_CONTACTS,
+				    INPUT_MT_DIRECT | INPUT_MT_TRACK |
+				    INPUT_MT_DROP_UNUSED);
+	if (error) {
+		dev_err(dev, "failed to multi touch slots initialization\n");
+		return error;
+	}
+
+	error = devm_request_threaded_irq(dev, client->irq,
+					  NULL, rohm_ts_soft_irq,
+					  IRQF_ONESHOT, client->name, ts);
+	if (error) {
+		dev_err(dev, "failed to request IRQ: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "failed to register input device: %d\n", error);
+		return error;
+	}
+
+	error = sysfs_create_group(&dev->kobj, &rohm_ts_attr_group);
+	if (error) {
+		dev_err(dev, "failed to create sysfs group: %d\n", error);
+		return error;
+	}
+
+	error = devm_add_action(dev, rohm_ts_remove_sysfs_group, dev);
+	if (error) {
+		rohm_ts_remove_sysfs_group(dev);
+		dev_err(&client->dev,
+			"Failed to add sysfs cleanup action: %d\n",
+			error);
+		return error;
+	}
+
+	return error;
+}
+
+static const struct i2c_device_id rohm_bu21023_i2c_id[] = {
+	{ BU21023_NAME, 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, rohm_bu21023_i2c_id);
+
+static struct i2c_driver rohm_bu21023_i2c_driver = {
+	.driver = {
+		.name = BU21023_NAME,
+	},
+	.probe = rohm_bu21023_i2c_probe,
+	.id_table = rohm_bu21023_i2c_id,
+};
+module_i2c_driver(rohm_bu21023_i2c_driver);
+
+MODULE_DESCRIPTION("ROHM BU21023/24 Touchscreen driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("ROHM Co., Ltd.");