diff mbox

[1/4] ASoC: sun4i-codec: Add support for PA gpio pin

Message ID 1448027233-750-1-git-send-email-hdegoede@redhat.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hans de Goede Nov. 20, 2015, 1:47 p.m. UTC
Add support for PA gpio pin for controlling an external amplifier as used
on some Allwinner boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 .../devicetree/bindings/sound/sun4i-codec.txt      |  3 +++
 sound/soc/sunxi/sun4i-codec.c                      | 25 ++++++++++++++--------
 2 files changed, 19 insertions(+), 9 deletions(-)

Comments

Rob Herring (Arm) Nov. 20, 2015, 3:23 p.m. UTC | #1
On Fri, Nov 20, 2015 at 02:47:10PM +0100, Hans de Goede wrote:
> Add support for PA gpio pin for controlling an external amplifier as used
> on some Allwinner boards.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  .../devicetree/bindings/sound/sun4i-codec.txt      |  3 +++
>  sound/soc/sunxi/sun4i-codec.c                      | 25 ++++++++++++++--------
>  2 files changed, 19 insertions(+), 9 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
> index c92966b..974babe 100644
> --- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
> +++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
> @@ -14,6 +14,9 @@ Required properties:
>     - "apb": the parent APB clock for this controller
>     - "codec": the parent module clock
>  
> +Optional properties:
> +- pa-gpios: gpio to enable external amplifier
> +
>  Example:
>  codec: codec@01c22c00 {
>  	#sound-dai-cells = <0>;
> diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
> index bcbf4da..2aca9cd 100644
> --- a/sound/soc/sunxi/sun4i-codec.c
> +++ b/sound/soc/sunxi/sun4i-codec.c
> @@ -27,6 +27,7 @@
>  #include <linux/of_address.h>
>  #include <linux/clk.h>
>  #include <linux/regmap.h>
> +#include <linux/gpio/consumer.h>
>  
>  #include <sound/core.h>
>  #include <sound/pcm.h>
> @@ -101,16 +102,15 @@ struct sun4i_codec {
>  	struct regmap	*regmap;
>  	struct clk	*clk_apb;
>  	struct clk	*clk_module;
> +	struct gpio_desc *gpio_pa;
>  
>  	struct snd_dmaengine_dai_dma_data	playback_dma_data;
>  };
>  
>  static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
>  {
> -	/*
> -	 * FIXME: according to the BSP, we might need to drive a PA
> -	 *        GPIO high here on some boards
> -	 */
> +	if (scodec->gpio_pa)
> +		gpiod_set_value_cansleep(scodec->gpio_pa, 1);
>  
>  	/* Flush TX FIFO */
>  	regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
> @@ -125,15 +125,13 @@ static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
>  
>  static void sun4i_codec_stop_playback(struct sun4i_codec *scodec)
>  {
> -	/*
> -	 * FIXME: according to the BSP, we might need to drive a PA
> -	 *        GPIO low here on some boards
> -	 */
> -
>  	/* Disable DAC DRQ */
>  	regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
>  			   BIT(SUN4I_CODEC_DAC_FIFOC_DAC_DRQ_EN),
>  			   0);
> +
> +	if (scodec->gpio_pa)
> +		gpiod_set_value_cansleep(scodec->gpio_pa, 0);
>  }
>  
>  static int sun4i_codec_trigger(struct snd_pcm_substream *substream, int cmd,
> @@ -633,6 +631,15 @@ static int sun4i_codec_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> +	scodec->gpio_pa = devm_gpiod_get_optional(&pdev->dev, "pa",
> +						  GPIOD_OUT_HIGH);
> +	if (IS_ERR(scodec->gpio_pa)) {
> +		ret = PTR_ERR(scodec->gpio_pa);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "Failed to get pa gpio: %d\n", ret);
> +		return ret;
> +	}
> +
>  	/* DMA configuration for TX FIFO */
>  	scodec->playback_dma_data.addr = res->start + SUN4I_CODEC_DAC_TXDATA;
>  	scodec->playback_dma_data.maxburst = 4;
> -- 
> 2.5.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
Maxime Ripard Nov. 20, 2015, 4:30 p.m. UTC | #2
On Fri, Nov 20, 2015 at 02:47:10PM +0100, Hans de Goede wrote:
> Add support for PA gpio pin for controlling an external amplifier as used
> on some Allwinner boards.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  .../devicetree/bindings/sound/sun4i-codec.txt      |  3 +++
>  sound/soc/sunxi/sun4i-codec.c                      | 25 ++++++++++++++--------
>  2 files changed, 19 insertions(+), 9 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
> index c92966b..974babe 100644
> --- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
> +++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
> @@ -14,6 +14,9 @@ Required properties:
>     - "apb": the parent APB clock for this controller
>     - "codec": the parent module clock
>  
> +Optional properties:
> +- pa-gpios: gpio to enable external amplifier

This is a custom property, it should be prefixed by the vendor name.

> +
>  Example:
>  codec: codec@01c22c00 {
>  	#sound-dai-cells = <0>;
> diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
> index bcbf4da..2aca9cd 100644
> --- a/sound/soc/sunxi/sun4i-codec.c
> +++ b/sound/soc/sunxi/sun4i-codec.c
> @@ -27,6 +27,7 @@
>  #include <linux/of_address.h>
>  #include <linux/clk.h>
>  #include <linux/regmap.h>
> +#include <linux/gpio/consumer.h>
>  
>  #include <sound/core.h>
>  #include <sound/pcm.h>
> @@ -101,16 +102,15 @@ struct sun4i_codec {
>  	struct regmap	*regmap;
>  	struct clk	*clk_apb;
>  	struct clk	*clk_module;
> +	struct gpio_desc *gpio_pa;
>  
>  	struct snd_dmaengine_dai_dma_data	playback_dma_data;
>  };
>  
>  static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
>  {
> -	/*
> -	 * FIXME: according to the BSP, we might need to drive a PA
> -	 *        GPIO high here on some boards
> -	 */
> +	if (scodec->gpio_pa)
> +		gpiod_set_value_cansleep(scodec->gpio_pa, 1);
>  
>  	/* Flush TX FIFO */
>  	regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
> @@ -125,15 +125,13 @@ static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
>  
>  static void sun4i_codec_stop_playback(struct sun4i_codec *scodec)
>  {
> -	/*
> -	 * FIXME: according to the BSP, we might need to drive a PA
> -	 *        GPIO low here on some boards
> -	 */
> -
>  	/* Disable DAC DRQ */
>  	regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
>  			   BIT(SUN4I_CODEC_DAC_FIFOC_DAC_DRQ_EN),
>  			   0);
> +
> +	if (scodec->gpio_pa)
> +		gpiod_set_value_cansleep(scodec->gpio_pa, 0);

You should rather plug that into DAPM, using a speaker widget, and a
custom event function that will enable or disable the amplifier only
when this audio path is going to be used.

You can see such an example here:
http://lxr.free-electrons.com/source/sound/soc/jz4740/qi_lb60.c#L29

That will require to modify a bit sun4i_codec_create_card as well in
order to add the new widgets (and routes) when the DT property is
found.

Thanks!
Maxime
Chen-Yu Tsai Nov. 20, 2015, 4:42 p.m. UTC | #3
On Sat, Nov 21, 2015 at 12:30 AM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> On Fri, Nov 20, 2015 at 02:47:10PM +0100, Hans de Goede wrote:
>> Add support for PA gpio pin for controlling an external amplifier as used
>> on some Allwinner boards.
>>
>> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
>> ---
>>  .../devicetree/bindings/sound/sun4i-codec.txt      |  3 +++
>>  sound/soc/sunxi/sun4i-codec.c                      | 25 ++++++++++++++--------
>>  2 files changed, 19 insertions(+), 9 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
>> index c92966b..974babe 100644
>> --- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
>> +++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
>> @@ -14,6 +14,9 @@ Required properties:
>>     - "apb": the parent APB clock for this controller
>>     - "codec": the parent module clock
>>
>> +Optional properties:
>> +- pa-gpios: gpio to enable external amplifier
>
> This is a custom property, it should be prefixed by the vendor name.
>
>> +
>>  Example:
>>  codec: codec@01c22c00 {
>>       #sound-dai-cells = <0>;
>> diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
>> index bcbf4da..2aca9cd 100644
>> --- a/sound/soc/sunxi/sun4i-codec.c
>> +++ b/sound/soc/sunxi/sun4i-codec.c
>> @@ -27,6 +27,7 @@
>>  #include <linux/of_address.h>
>>  #include <linux/clk.h>
>>  #include <linux/regmap.h>
>> +#include <linux/gpio/consumer.h>
>>
>>  #include <sound/core.h>
>>  #include <sound/pcm.h>
>> @@ -101,16 +102,15 @@ struct sun4i_codec {
>>       struct regmap   *regmap;
>>       struct clk      *clk_apb;
>>       struct clk      *clk_module;
>> +     struct gpio_desc *gpio_pa;
>>
>>       struct snd_dmaengine_dai_dma_data       playback_dma_data;
>>  };
>>
>>  static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
>>  {
>> -     /*
>> -      * FIXME: according to the BSP, we might need to drive a PA
>> -      *        GPIO high here on some boards
>> -      */
>> +     if (scodec->gpio_pa)
>> +             gpiod_set_value_cansleep(scodec->gpio_pa, 1);
>>
>>       /* Flush TX FIFO */
>>       regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
>> @@ -125,15 +125,13 @@ static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
>>
>>  static void sun4i_codec_stop_playback(struct sun4i_codec *scodec)
>>  {
>> -     /*
>> -      * FIXME: according to the BSP, we might need to drive a PA
>> -      *        GPIO low here on some boards
>> -      */
>> -
>>       /* Disable DAC DRQ */
>>       regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
>>                          BIT(SUN4I_CODEC_DAC_FIFOC_DAC_DRQ_EN),
>>                          0);
>> +
>> +     if (scodec->gpio_pa)
>> +             gpiod_set_value_cansleep(scodec->gpio_pa, 0);
>
> You should rather plug that into DAPM, using a speaker widget, and a
> custom event function that will enable or disable the amplifier only
> when this audio path is going to be used.

Isn't an "amplifier" widget better suited?

ChenYu

> You can see such an example here:
> http://lxr.free-electrons.com/source/sound/soc/jz4740/qi_lb60.c#L29
>
> That will require to modify a bit sun4i_codec_create_card as well in
> order to add the new widgets (and routes) when the DT property is
> found.
>
> Thanks!
> Maxime
>
> --
> Maxime Ripard, Free Electrons
> Embedded Linux, Kernel and Android engineering
> http://free-electrons.com
Maxime Ripard Nov. 20, 2015, 5:02 p.m. UTC | #4
On Sat, Nov 21, 2015 at 12:42:41AM +0800, Chen-Yu Tsai wrote:
> >>  static void sun4i_codec_stop_playback(struct sun4i_codec *scodec)
> >>  {
> >> -     /*
> >> -      * FIXME: according to the BSP, we might need to drive a PA
> >> -      *        GPIO low here on some boards
> >> -      */
> >> -
> >>       /* Disable DAC DRQ */
> >>       regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
> >>                          BIT(SUN4I_CODEC_DAC_FIFOC_DAC_DRQ_EN),
> >>                          0);
> >> +
> >> +     if (scodec->gpio_pa)
> >> +             gpiod_set_value_cansleep(scodec->gpio_pa, 0);
> >
> > You should rather plug that into DAPM, using a speaker widget, and a
> > custom event function that will enable or disable the amplifier only
> > when this audio path is going to be used.
> 
> Isn't an "amplifier" widget better suited?

This is exactly what SND_SOC_DAPM_SPK is used for:
http://lxr.free-electrons.com/source/Documentation/sound/alsa/soc/dapm.txt#L273 ;)

Maxime
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index c92966b..974babe 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -14,6 +14,9 @@  Required properties:
    - "apb": the parent APB clock for this controller
    - "codec": the parent module clock
 
+Optional properties:
+- pa-gpios: gpio to enable external amplifier
+
 Example:
 codec: codec@01c22c00 {
 	#sound-dai-cells = <0>;
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index bcbf4da..2aca9cd 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -27,6 +27,7 @@ 
 #include <linux/of_address.h>
 #include <linux/clk.h>
 #include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
 
 #include <sound/core.h>
 #include <sound/pcm.h>
@@ -101,16 +102,15 @@  struct sun4i_codec {
 	struct regmap	*regmap;
 	struct clk	*clk_apb;
 	struct clk	*clk_module;
+	struct gpio_desc *gpio_pa;
 
 	struct snd_dmaengine_dai_dma_data	playback_dma_data;
 };
 
 static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
 {
-	/*
-	 * FIXME: according to the BSP, we might need to drive a PA
-	 *        GPIO high here on some boards
-	 */
+	if (scodec->gpio_pa)
+		gpiod_set_value_cansleep(scodec->gpio_pa, 1);
 
 	/* Flush TX FIFO */
 	regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
@@ -125,15 +125,13 @@  static void sun4i_codec_start_playback(struct sun4i_codec *scodec)
 
 static void sun4i_codec_stop_playback(struct sun4i_codec *scodec)
 {
-	/*
-	 * FIXME: according to the BSP, we might need to drive a PA
-	 *        GPIO low here on some boards
-	 */
-
 	/* Disable DAC DRQ */
 	regmap_update_bits(scodec->regmap, SUN4I_CODEC_DAC_FIFOC,
 			   BIT(SUN4I_CODEC_DAC_FIFOC_DAC_DRQ_EN),
 			   0);
+
+	if (scodec->gpio_pa)
+		gpiod_set_value_cansleep(scodec->gpio_pa, 0);
 }
 
 static int sun4i_codec_trigger(struct snd_pcm_substream *substream, int cmd,
@@ -633,6 +631,15 @@  static int sun4i_codec_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	scodec->gpio_pa = devm_gpiod_get_optional(&pdev->dev, "pa",
+						  GPIOD_OUT_HIGH);
+	if (IS_ERR(scodec->gpio_pa)) {
+		ret = PTR_ERR(scodec->gpio_pa);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get pa gpio: %d\n", ret);
+		return ret;
+	}
+
 	/* DMA configuration for TX FIFO */
 	scodec->playback_dma_data.addr = res->start + SUN4I_CODEC_DAC_TXDATA;
 	scodec->playback_dma_data.maxburst = 4;