@@ -56,31 +56,34 @@ test_clone_and_read_compressed_extent()
_scratch_mkfs >>$seqres.full 2>&1
_scratch_mount $mount_opts
+ BLOCK_SIZE=$(get_block_size $SCRATCH_MNT)
+
# Create a test file with a single extent that is compressed (the
# data we write into it is highly compressible no matter which
# compression algorithm is used, zlib or lzo).
- $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K 4K" \
- -c "pwrite -S 0xbb 4K 8K" \
- -c "pwrite -S 0xcc 12K 4K" \
- $SCRATCH_MNT/foo | _filter_xfs_io
+ $XFS_IO_PROG -f -c "pwrite -S 0xaa 0K $((1 * $BLOCK_SIZE))" \
+ -c "pwrite -S 0xbb $((1 * $BLOCK_SIZE)) $((2 * $BLOCK_SIZE))" \
+ -c "pwrite -S 0xcc $((3 * $BLOCK_SIZE)) $((1 * $BLOCK_SIZE))" \
+ $SCRATCH_MNT/foo | _filter_xfs_io_blocks_modified
+
# Now clone our extent into an adjacent offset.
- $CLONER_PROG -s $((4 * 1024)) -d $((16 * 1024)) -l $((8 * 1024)) \
- $SCRATCH_MNT/foo $SCRATCH_MNT/foo
+ $CLONER_PROG -s $((1 * $BLOCK_SIZE)) -d $((4 * $BLOCK_SIZE)) \
+ -l $((2 * $BLOCK_SIZE)) $SCRATCH_MNT/foo $SCRATCH_MNT/foo
# Same as before but for this file we clone the extent into a lower
# file offset.
- $XFS_IO_PROG -f -c "pwrite -S 0xaa 8K 4K" \
- -c "pwrite -S 0xbb 12K 8K" \
- -c "pwrite -S 0xcc 20K 4K" \
- $SCRATCH_MNT/bar | _filter_xfs_io
+ $XFS_IO_PROG -f \
+ -c "pwrite -S 0xaa $((2 * $BLOCK_SIZE)) $((1 * $BLOCK_SIZE))" \
+ -c "pwrite -S 0xbb $((3 * $BLOCK_SIZE)) $((2 * $BLOCK_SIZE))" \
+ -c "pwrite -S 0xcc $((5 * $BLOCK_SIZE)) $((1 * $BLOCK_SIZE))" \
+ $SCRATCH_MNT/bar | _filter_xfs_io_blocks_modified
- $CLONER_PROG -s $((12 * 1024)) -d 0 -l $((8 * 1024)) \
+ $CLONER_PROG -s $((3 * $BLOCK_SIZE)) -d 0 -l $((2 * $BLOCK_SIZE)) \
$SCRATCH_MNT/bar $SCRATCH_MNT/bar
- echo "File digests before unmounting filesystem:"
- md5sum $SCRATCH_MNT/foo | _filter_scratch
- md5sum $SCRATCH_MNT/bar | _filter_scratch
+ foo_orig_hash=$(md5sum $SCRATCH_MNT/foo | cut -f 1 -d ' ')
+ bar_orig_hash=$(md5sum $SCRATCH_MNT/bar | cut -f 1 -d ' ')
# Evicting the inode or clearing the page cache before reading again
# the file would also trigger the bug - reads were returning all bytes
@@ -91,10 +94,18 @@ test_clone_and_read_compressed_extent()
# ranges that point to the same compressed extent.
_scratch_remount
- echo "File digests after mounting filesystem again:"
- # Must match the same digests we got before.
- md5sum $SCRATCH_MNT/foo | _filter_scratch
- md5sum $SCRATCH_MNT/bar | _filter_scratch
+ foo_hash=$(md5sum $SCRATCH_MNT/foo | cut -f 1 -d ' ')
+ bar_hash=$(md5sum $SCRATCH_MNT/bar | cut -f 1 -d ' ')
+
+ if [ $foo_orig_hash != $foo_hash ]; then
+ echo "Read operation failed on $SCRATCH_MNT/foo: "\
+ "Mimatching hash values detected."
+ fi
+
+ if [ $bar_orig_hash != $bar_hash ]; then
+ echo "Read operation failed on $SCRATCH_MNT/bar: "\
+ "Mimatching hash values detected."
+ fi
}
echo -e "\nTesting with zlib compression..."
@@ -1,41 +1,17 @@
QA output created by 103
Testing with zlib compression...
-wrote 4096/4096 bytes at offset 0
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 8192/8192 bytes at offset 4096
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 4096/4096 bytes at offset 12288
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 4096/4096 bytes at offset 8192
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 8192/8192 bytes at offset 12288
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 4096/4096 bytes at offset 20480
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-File digests before unmounting filesystem:
-4b985a45790261a706c3ddbf22c5f765 SCRATCH_MNT/foo
-fd331e6b7a9ab105f48f71b53162d5b5 SCRATCH_MNT/bar
-File digests after mounting filesystem again:
-4b985a45790261a706c3ddbf22c5f765 SCRATCH_MNT/foo
-fd331e6b7a9ab105f48f71b53162d5b5 SCRATCH_MNT/bar
+Blocks modified: [0 - 0]
+Blocks modified: [1 - 2]
+Blocks modified: [3 - 3]
+Blocks modified: [2 - 2]
+Blocks modified: [3 - 4]
+Blocks modified: [5 - 5]
Testing with lzo compression...
-wrote 4096/4096 bytes at offset 0
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 8192/8192 bytes at offset 4096
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 4096/4096 bytes at offset 12288
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 4096/4096 bytes at offset 8192
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 8192/8192 bytes at offset 12288
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-wrote 4096/4096 bytes at offset 20480
-XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
-File digests before unmounting filesystem:
-4b985a45790261a706c3ddbf22c5f765 SCRATCH_MNT/foo
-fd331e6b7a9ab105f48f71b53162d5b5 SCRATCH_MNT/bar
-File digests after mounting filesystem again:
-4b985a45790261a706c3ddbf22c5f765 SCRATCH_MNT/foo
-fd331e6b7a9ab105f48f71b53162d5b5 SCRATCH_MNT/bar
+Blocks modified: [0 - 0]
+Blocks modified: [1 - 2]
+Blocks modified: [3 - 3]
+Blocks modified: [2 - 2]
+Blocks modified: [3 - 4]
+Blocks modified: [5 - 5]
This commit makes use of the new _filter_xfs_io_blocks_modified filtering function to print information in terms of file blocks rather than file offset. Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> --- tests/btrfs/103 | 47 +++++++++++++++++++++++++++++------------------ tests/btrfs/103.out | 48 ++++++++++++------------------------------------ 2 files changed, 41 insertions(+), 54 deletions(-)