diff mbox

[v2,06/10] drm/hisilicon: Add vblank feature

Message ID 1448707145-69348-7-git-send-email-xinliang.liu@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Xinliang Liu Nov. 28, 2015, 10:39 a.m. UTC
Add vblank handle for ADE.

Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Signed-off-by: Andy Green <andy.green@linaro.org>
---
 drivers/gpu/drm/hisilicon/hisi_drm_ade.c | 78 ++++++++++++++++++++++++++++++++
 drivers/gpu/drm/hisilicon/hisi_drm_ade.h | 16 +++++++
 drivers/gpu/drm/hisilicon/hisi_drm_drv.c | 19 +++++++-
 3 files changed, 112 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/hisilicon/hisi_drm_ade.h

Comments

Daniel Vetter Nov. 30, 2015, 7:54 a.m. UTC | #1
On Sat, Nov 28, 2015 at 06:39:01PM +0800, Xinliang Liu wrote:
> Add vblank handle for ADE.
> 
> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
> Signed-off-by: Andy Green <andy.green@linaro.org>
> ---
>  drivers/gpu/drm/hisilicon/hisi_drm_ade.c | 78 ++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/hisilicon/hisi_drm_ade.h | 16 +++++++
>  drivers/gpu/drm/hisilicon/hisi_drm_drv.c | 19 +++++++-
>  3 files changed, 112 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/gpu/drm/hisilicon/hisi_drm_ade.h
> 
> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
> index b0976c3..acb11e7 100644
> --- a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
> @@ -267,7 +267,79 @@ static void ade_power_down(struct ade_hw_ctx *ctx)
>  	ctx->power_on = false;
>  }
>  
> +static struct drm_crtc *hisi_get_crtc_from_index(struct drm_device *dev,
> +						 unsigned int index)

Ugly that you had to add this, but unfortunately necessary :( Fixing up
the drm vblank hooks so that they deal with struct drm_crtc directly is
somewhere on my todo. But drm_irq.c is still a bit a mess, so this is some
ways off still.

What might be possible as a follow-up cleanup though is to add
vblank_enable and vblank_disable functions to struct
drm_crtc_helper_funcs. And then provide this code here to map from int
index to struct drm_crtc * as helpers in a new drm_vblank_helper.c file.
That might be a good intermediate step.

But nothing that needs to be done before merging hisilicon, that's for
sure.

One more comment below.

> +{
> +	unsigned int index_tmp = 0;
> +	struct drm_crtc *crtc;
> +
> +	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
> +		if (index_tmp == index)
> +			return crtc;
> +
> +		index_tmp++;
> +	}
> +
> +	WARN_ON(true);
> +}
> +
> +int ade_enable_vblank(struct drm_device *dev, int crtc_index)
> +{
> +	struct drm_crtc *crtc = hisi_get_crtc_from_index(dev, crtc_index);
> +	struct ade_crtc *acrtc = to_ade_crtc(crtc);
> +	struct ade_hw_ctx *ctx = acrtc->ctx;
> +	void __iomem *base = ctx->base;
> +	u32 intr_en;
> +
> +	DRM_INFO("enable_vblank enter.\n");
> +	if (!ctx->power_on)
> +		(void)ade_power_up(ctx);
> +
> +	intr_en = readl(base + LDI_INT_EN);
> +	intr_en |= LDI_ISR_FRAME_END_INT;
> +	writel(intr_en, base + LDI_INT_EN);
>  
> +	return 0;
> +}
> +
> +void ade_disable_vblank(struct drm_device *dev, int crtc_index)
> +{
> +	struct drm_crtc *crtc = hisi_get_crtc_from_index(dev, crtc_index);
> +	struct ade_crtc *acrtc = to_ade_crtc(crtc);
> +	struct ade_hw_ctx *ctx = acrtc->ctx;
> +	void __iomem *base = ctx->base;
> +	u32 intr_en;
> +
> +	DRM_INFO("disable_vblank enter.\n");
> +	if (!ctx->power_on) {
> +		DRM_ERROR("power is down! vblank disable fail\n");
> +		return;
> +	}
> +	intr_en = readl(base + LDI_INT_EN);
> +	intr_en &= ~LDI_ISR_FRAME_END_INT;
> +	writel(intr_en, base + LDI_INT_EN);
> +}
> +
> +static irqreturn_t ade_irq_handler(int irq, void *data)
> +{
> +	struct ade_crtc *acrtc = data;
> +	struct ade_hw_ctx *ctx = acrtc->ctx;
> +	struct drm_crtc *crtc = &acrtc->base;
> +	struct drm_device *dev = crtc->dev;
> +	void __iomem *base = ctx->base;
> +	u32 status;
> +
> +	status = readl(base + LDI_MSK_INT);
> +	/* DRM_INFO("LDI IRQ: status=0x%X\n",status); */
> +
> +	/* vblank irq */
> +	if (status & LDI_ISR_FRAME_END_INT) {
> +		writel(LDI_ISR_FRAME_END_INT, base + LDI_INT_CLR);
> +		drm_handle_vblank(dev, drm_crtc_index(crtc));

drm_crtc_handle_vblank please. At least when calling into the vblank code
drivers don't have to do the struct drm_crtc -> int index conversion any
more. Please make sure you do that everywhere, in case I've missed one.

Cheers, Daniel

> +	}
> +
> +	return IRQ_HANDLED;
> +}
>  
>  /*
>   * set modules' reset mode: by software or hardware
> @@ -858,6 +930,12 @@ static int ade_bind(struct device *dev, struct device *master, void *data)
>  	if (ret)
>  		return ret;
>  
> +	/* vblank irq init */
> +	ret = request_irq(ctx->irq, ade_irq_handler, DRIVER_IRQ_SHARED,
> +			  drm_dev->driver->name, acrtc);
> +	if (ret)
> +		return ret;
> +
>  	return 0;
>  }
>  
> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_ade.h b/drivers/gpu/drm/hisilicon/hisi_drm_ade.h
> new file mode 100644
> index 0000000..d1d7b5d
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_ade.h
> @@ -0,0 +1,16 @@
> +/*
> + * Copyright (c) 2014-2015 Hisilicon Limited.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __HISI_DRM_ADE_H__
> +#define __HISI_DRM_ADE_H__
> +
> +int ade_enable_vblank(struct drm_device *dev, int crtc_index);
> +void ade_disable_vblank(struct drm_device *dev, int crtc_index);
> +
> +#endif
> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_drv.c b/drivers/gpu/drm/hisilicon/hisi_drm_drv.c
> index d0eca80..13f59aa 100644
> --- a/drivers/gpu/drm/hisilicon/hisi_drm_drv.c
> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_drv.c
> @@ -21,6 +21,7 @@
>  #include <drm/drm_fb_cma_helper.h>
>  #include <drm/drm_atomic_helper.h>
>  
> +#include "hisi_drm_ade.h"
>  #include "hisi_drm_drv.h"
>  
>  #define DRIVER_NAME	"hisi-drm"
> @@ -29,6 +30,7 @@ static int hisi_drm_unload(struct drm_device *dev)
>  {
>  	struct hisi_drm_private *priv = dev->dev_private;
>  
> +	drm_vblank_cleanup(dev);
>  	drm_mode_config_cleanup(dev);
>  	devm_kfree(dev->dev, priv);
>  	dev->dev_private = NULL;
> @@ -76,11 +78,22 @@ static int hisi_drm_load(struct drm_device *dev, unsigned long flags)
>  		goto err_mode_config_cleanup;
>  	}
>  
> +	/* vblank init */
> +	ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
> +	if (ret) {
> +		DRM_ERROR("failed to initialize vblank.\n");
> +		goto err_unbind_all;
> +	}
> +	/* with irq_enabled = true, we can use the vblank feature. */
> +	dev->irq_enabled = true;
> +
>  	/* reset all the states of crtc/plane/encoder/connector */
>  	drm_mode_config_reset(dev);
>  
>  	return 0;
>  
> +err_unbind_all:
> +	component_unbind_all(dev->dev, dev);
>  err_mode_config_cleanup:
>  	drm_mode_config_cleanup(dev);
>  	devm_kfree(dev->dev, priv);
> @@ -126,7 +139,7 @@ static int hisi_gem_cma_dumb_create(struct drm_file *file,
>  
>  static struct drm_driver hisi_drm_driver = {
>  	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
> -				  DRIVER_ATOMIC,
> +				  DRIVER_ATOMIC | DRIVER_HAVE_IRQ,
>  	.load			= hisi_drm_load,
>  	.unload                 = hisi_drm_unload,
>  	.fops			= &hisi_drm_fops,
> @@ -148,6 +161,10 @@ static struct drm_driver hisi_drm_driver = {
>  	.gem_prime_vunmap	= drm_gem_cma_prime_vunmap,
>  	.gem_prime_mmap		= drm_gem_cma_prime_mmap,
>  
> +	.get_vblank_counter	= drm_vblank_count,
> +	.enable_vblank		= ade_enable_vblank,
> +	.disable_vblank		= ade_disable_vblank,
> +
>  	.name			= "hisi",
>  	.desc			= "Hisilicon SoCs' DRM Driver",
>  	.date			= "20150718",
> -- 
> 1.9.1
>
Xinliang Liu Dec. 1, 2015, 3:16 a.m. UTC | #2
On 30 November 2015 at 15:54, Daniel Vetter <daniel@ffwll.ch> wrote:
> On Sat, Nov 28, 2015 at 06:39:01PM +0800, Xinliang Liu wrote:
>> Add vblank handle for ADE.
>>
>> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
>> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
>> Signed-off-by: Andy Green <andy.green@linaro.org>
>> ---
>>  drivers/gpu/drm/hisilicon/hisi_drm_ade.c | 78 ++++++++++++++++++++++++++++++++
>>  drivers/gpu/drm/hisilicon/hisi_drm_ade.h | 16 +++++++
>>  drivers/gpu/drm/hisilicon/hisi_drm_drv.c | 19 +++++++-
>>  3 files changed, 112 insertions(+), 1 deletion(-)
>>  create mode 100644 drivers/gpu/drm/hisilicon/hisi_drm_ade.h
>>
>> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
>> index b0976c3..acb11e7 100644
>> --- a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
>> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
>> @@ -267,7 +267,79 @@ static void ade_power_down(struct ade_hw_ctx *ctx)
>>       ctx->power_on = false;
>>  }
>>
>> +static struct drm_crtc *hisi_get_crtc_from_index(struct drm_device *dev,
>> +                                              unsigned int index)
>
> Ugly that you had to add this, but unfortunately necessary :( Fixing up
> the drm vblank hooks so that they deal with struct drm_crtc directly is
> somewhere on my todo. But drm_irq.c is still a bit a mess, so this is some
> ways off still.
>
> What might be possible as a follow-up cleanup though is to add
> vblank_enable and vblank_disable functions to struct
> drm_crtc_helper_funcs. And then provide this code here to map from int
> index to struct drm_crtc * as helpers in a new drm_vblank_helper.c file.
> That might be a good intermediate step.

I would like to have a try to make this intermediate step patch and
send out for review soon.

> But nothing that needs to be done before merging hisilicon, that's for
> sure.
>
> One more comment below.
>
>> +{
>> +     unsigned int index_tmp = 0;
>> +     struct drm_crtc *crtc;
>> +
>> +     list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
>> +             if (index_tmp == index)
>> +                     return crtc;
>> +
>> +             index_tmp++;
>> +     }
>> +
>> +     WARN_ON(true);
>> +}
>> +
>> +int ade_enable_vblank(struct drm_device *dev, int crtc_index)
>> +{
>> +     struct drm_crtc *crtc = hisi_get_crtc_from_index(dev, crtc_index);
>> +     struct ade_crtc *acrtc = to_ade_crtc(crtc);
>> +     struct ade_hw_ctx *ctx = acrtc->ctx;
>> +     void __iomem *base = ctx->base;
>> +     u32 intr_en;
>> +
>> +     DRM_INFO("enable_vblank enter.\n");
>> +     if (!ctx->power_on)
>> +             (void)ade_power_up(ctx);
>> +
>> +     intr_en = readl(base + LDI_INT_EN);
>> +     intr_en |= LDI_ISR_FRAME_END_INT;
>> +     writel(intr_en, base + LDI_INT_EN);
>>
>> +     return 0;
>> +}
>> +
>> +void ade_disable_vblank(struct drm_device *dev, int crtc_index)
>> +{
>> +     struct drm_crtc *crtc = hisi_get_crtc_from_index(dev, crtc_index);
>> +     struct ade_crtc *acrtc = to_ade_crtc(crtc);
>> +     struct ade_hw_ctx *ctx = acrtc->ctx;
>> +     void __iomem *base = ctx->base;
>> +     u32 intr_en;
>> +
>> +     DRM_INFO("disable_vblank enter.\n");
>> +     if (!ctx->power_on) {
>> +             DRM_ERROR("power is down! vblank disable fail\n");
>> +             return;
>> +     }
>> +     intr_en = readl(base + LDI_INT_EN);
>> +     intr_en &= ~LDI_ISR_FRAME_END_INT;
>> +     writel(intr_en, base + LDI_INT_EN);
>> +}
>> +
>> +static irqreturn_t ade_irq_handler(int irq, void *data)
>> +{
>> +     struct ade_crtc *acrtc = data;
>> +     struct ade_hw_ctx *ctx = acrtc->ctx;
>> +     struct drm_crtc *crtc = &acrtc->base;
>> +     struct drm_device *dev = crtc->dev;
>> +     void __iomem *base = ctx->base;
>> +     u32 status;
>> +
>> +     status = readl(base + LDI_MSK_INT);
>> +     /* DRM_INFO("LDI IRQ: status=0x%X\n",status); */
>> +
>> +     /* vblank irq */
>> +     if (status & LDI_ISR_FRAME_END_INT) {
>> +             writel(LDI_ISR_FRAME_END_INT, base + LDI_INT_CLR);
>> +             drm_handle_vblank(dev, drm_crtc_index(crtc));
>
> drm_crtc_handle_vblank please. At least when calling into the vblank code
> drivers don't have to do the struct drm_crtc -> int index conversion any
> more. Please make sure you do that everywhere, in case I've missed one.

will use drm_crtc_handle_vblank in v3.

Thanks,
-xinliang

>
> Cheers, Daniel
>
>> +     }
>> +
>> +     return IRQ_HANDLED;
>> +}
>>
>>  /*
>>   * set modules' reset mode: by software or hardware
>> @@ -858,6 +930,12 @@ static int ade_bind(struct device *dev, struct device *master, void *data)
>>       if (ret)
>>               return ret;
>>
>> +     /* vblank irq init */
>> +     ret = request_irq(ctx->irq, ade_irq_handler, DRIVER_IRQ_SHARED,
>> +                       drm_dev->driver->name, acrtc);
>> +     if (ret)
>> +             return ret;
>> +
>>       return 0;
>>  }
>>
>> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_ade.h b/drivers/gpu/drm/hisilicon/hisi_drm_ade.h
>> new file mode 100644
>> index 0000000..d1d7b5d
>> --- /dev/null
>> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_ade.h
>> @@ -0,0 +1,16 @@
>> +/*
>> + * Copyright (c) 2014-2015 Hisilicon Limited.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#ifndef __HISI_DRM_ADE_H__
>> +#define __HISI_DRM_ADE_H__
>> +
>> +int ade_enable_vblank(struct drm_device *dev, int crtc_index);
>> +void ade_disable_vblank(struct drm_device *dev, int crtc_index);
>> +
>> +#endif
>> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_drv.c b/drivers/gpu/drm/hisilicon/hisi_drm_drv.c
>> index d0eca80..13f59aa 100644
>> --- a/drivers/gpu/drm/hisilicon/hisi_drm_drv.c
>> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_drv.c
>> @@ -21,6 +21,7 @@
>>  #include <drm/drm_fb_cma_helper.h>
>>  #include <drm/drm_atomic_helper.h>
>>
>> +#include "hisi_drm_ade.h"
>>  #include "hisi_drm_drv.h"
>>
>>  #define DRIVER_NAME  "hisi-drm"
>> @@ -29,6 +30,7 @@ static int hisi_drm_unload(struct drm_device *dev)
>>  {
>>       struct hisi_drm_private *priv = dev->dev_private;
>>
>> +     drm_vblank_cleanup(dev);
>>       drm_mode_config_cleanup(dev);
>>       devm_kfree(dev->dev, priv);
>>       dev->dev_private = NULL;
>> @@ -76,11 +78,22 @@ static int hisi_drm_load(struct drm_device *dev, unsigned long flags)
>>               goto err_mode_config_cleanup;
>>       }
>>
>> +     /* vblank init */
>> +     ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
>> +     if (ret) {
>> +             DRM_ERROR("failed to initialize vblank.\n");
>> +             goto err_unbind_all;
>> +     }
>> +     /* with irq_enabled = true, we can use the vblank feature. */
>> +     dev->irq_enabled = true;
>> +
>>       /* reset all the states of crtc/plane/encoder/connector */
>>       drm_mode_config_reset(dev);
>>
>>       return 0;
>>
>> +err_unbind_all:
>> +     component_unbind_all(dev->dev, dev);
>>  err_mode_config_cleanup:
>>       drm_mode_config_cleanup(dev);
>>       devm_kfree(dev->dev, priv);
>> @@ -126,7 +139,7 @@ static int hisi_gem_cma_dumb_create(struct drm_file *file,
>>
>>  static struct drm_driver hisi_drm_driver = {
>>       .driver_features        = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
>> -                               DRIVER_ATOMIC,
>> +                               DRIVER_ATOMIC | DRIVER_HAVE_IRQ,
>>       .load                   = hisi_drm_load,
>>       .unload                 = hisi_drm_unload,
>>       .fops                   = &hisi_drm_fops,
>> @@ -148,6 +161,10 @@ static struct drm_driver hisi_drm_driver = {
>>       .gem_prime_vunmap       = drm_gem_cma_prime_vunmap,
>>       .gem_prime_mmap         = drm_gem_cma_prime_mmap,
>>
>> +     .get_vblank_counter     = drm_vblank_count,
>> +     .enable_vblank          = ade_enable_vblank,
>> +     .disable_vblank         = ade_disable_vblank,
>> +
>>       .name                   = "hisi",
>>       .desc                   = "Hisilicon SoCs' DRM Driver",
>>       .date                   = "20150718",
>> --
>> 1.9.1
>>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
Daniel Vetter Dec. 1, 2015, 7:13 a.m. UTC | #3
On Tue, Dec 01, 2015 at 11:16:19AM +0800, Xinliang Liu wrote:
> On 30 November 2015 at 15:54, Daniel Vetter <daniel@ffwll.ch> wrote:
> > On Sat, Nov 28, 2015 at 06:39:01PM +0800, Xinliang Liu wrote:
> >> Add vblank handle for ADE.
> >>
> >> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
> >> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
> >> Signed-off-by: Andy Green <andy.green@linaro.org>
> >> ---
> >>  drivers/gpu/drm/hisilicon/hisi_drm_ade.c | 78 ++++++++++++++++++++++++++++++++
> >>  drivers/gpu/drm/hisilicon/hisi_drm_ade.h | 16 +++++++
> >>  drivers/gpu/drm/hisilicon/hisi_drm_drv.c | 19 +++++++-
> >>  3 files changed, 112 insertions(+), 1 deletion(-)
> >>  create mode 100644 drivers/gpu/drm/hisilicon/hisi_drm_ade.h
> >>
> >> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
> >> index b0976c3..acb11e7 100644
> >> --- a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
> >> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
> >> @@ -267,7 +267,79 @@ static void ade_power_down(struct ade_hw_ctx *ctx)
> >>       ctx->power_on = false;
> >>  }
> >>
> >> +static struct drm_crtc *hisi_get_crtc_from_index(struct drm_device *dev,
> >> +                                              unsigned int index)
> >
> > Ugly that you had to add this, but unfortunately necessary :( Fixing up
> > the drm vblank hooks so that they deal with struct drm_crtc directly is
> > somewhere on my todo. But drm_irq.c is still a bit a mess, so this is some
> > ways off still.
> >
> > What might be possible as a follow-up cleanup though is to add
> > vblank_enable and vblank_disable functions to struct
> > drm_crtc_helper_funcs. And then provide this code here to map from int
> > index to struct drm_crtc * as helpers in a new drm_vblank_helper.c file.
> > That might be a good intermediate step.
> 
> I would like to have a try to make this intermediate step patch and
> send out for review soon.

Awesome, looking forward to reviewing it. If you have questions about
details fastest to ping me on irc (nick: danvet, #dri-devel on
freenode.net).

Cheers, Daniel
Xinliang Liu Dec. 1, 2015, 10:34 a.m. UTC | #4
On 1 December 2015 at 15:13, Daniel Vetter <daniel@ffwll.ch> wrote:
> On Tue, Dec 01, 2015 at 11:16:19AM +0800, Xinliang Liu wrote:
>> On 30 November 2015 at 15:54, Daniel Vetter <daniel@ffwll.ch> wrote:
>> > On Sat, Nov 28, 2015 at 06:39:01PM +0800, Xinliang Liu wrote:
>> >> Add vblank handle for ADE.
>> >>
>> >> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
>> >> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
>> >> Signed-off-by: Andy Green <andy.green@linaro.org>
>> >> ---
>> >>  drivers/gpu/drm/hisilicon/hisi_drm_ade.c | 78 ++++++++++++++++++++++++++++++++
>> >>  drivers/gpu/drm/hisilicon/hisi_drm_ade.h | 16 +++++++
>> >>  drivers/gpu/drm/hisilicon/hisi_drm_drv.c | 19 +++++++-
>> >>  3 files changed, 112 insertions(+), 1 deletion(-)
>> >>  create mode 100644 drivers/gpu/drm/hisilicon/hisi_drm_ade.h
>> >>
>> >> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
>> >> index b0976c3..acb11e7 100644
>> >> --- a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
>> >> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
>> >> @@ -267,7 +267,79 @@ static void ade_power_down(struct ade_hw_ctx *ctx)
>> >>       ctx->power_on = false;
>> >>  }
>> >>
>> >> +static struct drm_crtc *hisi_get_crtc_from_index(struct drm_device *dev,
>> >> +                                              unsigned int index)
>> >
>> > Ugly that you had to add this, but unfortunately necessary :( Fixing up
>> > the drm vblank hooks so that they deal with struct drm_crtc directly is
>> > somewhere on my todo. But drm_irq.c is still a bit a mess, so this is some
>> > ways off still.
>> >
>> > What might be possible as a follow-up cleanup though is to add
>> > vblank_enable and vblank_disable functions to struct
>> > drm_crtc_helper_funcs. And then provide this code here to map from int
>> > index to struct drm_crtc * as helpers in a new drm_vblank_helper.c file.
>> > That might be a good intermediate step.
>>
>> I would like to have a try to make this intermediate step patch and
>> send out for review soon.
>
> Awesome, looking forward to reviewing it. If you have questions about
> details fastest to ping me on irc (nick: danvet, #dri-devel on
> freenode.net).

Great!  What't your time zone. So that I can ping you in right time.

Thanks,
-xinliang

>
> Cheers, Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
Daniel Vetter Dec. 1, 2015, 12:54 p.m. UTC | #5
On Tue, Dec 01, 2015 at 06:34:43PM +0800, Xinliang Liu wrote:
> On 1 December 2015 at 15:13, Daniel Vetter <daniel@ffwll.ch> wrote:
> > On Tue, Dec 01, 2015 at 11:16:19AM +0800, Xinliang Liu wrote:
> >> On 30 November 2015 at 15:54, Daniel Vetter <daniel@ffwll.ch> wrote:
> >> > On Sat, Nov 28, 2015 at 06:39:01PM +0800, Xinliang Liu wrote:
> >> >> Add vblank handle for ADE.
> >> >>
> >> >> Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
> >> >> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
> >> >> Signed-off-by: Andy Green <andy.green@linaro.org>
> >> >> ---
> >> >>  drivers/gpu/drm/hisilicon/hisi_drm_ade.c | 78 ++++++++++++++++++++++++++++++++
> >> >>  drivers/gpu/drm/hisilicon/hisi_drm_ade.h | 16 +++++++
> >> >>  drivers/gpu/drm/hisilicon/hisi_drm_drv.c | 19 +++++++-
> >> >>  3 files changed, 112 insertions(+), 1 deletion(-)
> >> >>  create mode 100644 drivers/gpu/drm/hisilicon/hisi_drm_ade.h
> >> >>
> >> >> diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
> >> >> index b0976c3..acb11e7 100644
> >> >> --- a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
> >> >> +++ b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
> >> >> @@ -267,7 +267,79 @@ static void ade_power_down(struct ade_hw_ctx *ctx)
> >> >>       ctx->power_on = false;
> >> >>  }
> >> >>
> >> >> +static struct drm_crtc *hisi_get_crtc_from_index(struct drm_device *dev,
> >> >> +                                              unsigned int index)
> >> >
> >> > Ugly that you had to add this, but unfortunately necessary :( Fixing up
> >> > the drm vblank hooks so that they deal with struct drm_crtc directly is
> >> > somewhere on my todo. But drm_irq.c is still a bit a mess, so this is some
> >> > ways off still.
> >> >
> >> > What might be possible as a follow-up cleanup though is to add
> >> > vblank_enable and vblank_disable functions to struct
> >> > drm_crtc_helper_funcs. And then provide this code here to map from int
> >> > index to struct drm_crtc * as helpers in a new drm_vblank_helper.c file.
> >> > That might be a good intermediate step.
> >>
> >> I would like to have a try to make this intermediate step patch and
> >> send out for review soon.
> >
> > Awesome, looking forward to reviewing it. If you have questions about
> > details fastest to ping me on irc (nick: danvet, #dri-devel on
> > freenode.net).
> 
> Great!  What't your time zone. So that I can ping you in right time.

Europe, GMT+1.

Cheers, Daniel

> 
> Thanks,
> -xinliang
> 
> >
> > Cheers, Daniel
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
diff mbox

Patch

diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
index b0976c3..acb11e7 100644
--- a/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
+++ b/drivers/gpu/drm/hisilicon/hisi_drm_ade.c
@@ -267,7 +267,79 @@  static void ade_power_down(struct ade_hw_ctx *ctx)
 	ctx->power_on = false;
 }
 
+static struct drm_crtc *hisi_get_crtc_from_index(struct drm_device *dev,
+						 unsigned int index)
+{
+	unsigned int index_tmp = 0;
+	struct drm_crtc *crtc;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+		if (index_tmp == index)
+			return crtc;
+
+		index_tmp++;
+	}
+
+	WARN_ON(true);
+}
+
+int ade_enable_vblank(struct drm_device *dev, int crtc_index)
+{
+	struct drm_crtc *crtc = hisi_get_crtc_from_index(dev, crtc_index);
+	struct ade_crtc *acrtc = to_ade_crtc(crtc);
+	struct ade_hw_ctx *ctx = acrtc->ctx;
+	void __iomem *base = ctx->base;
+	u32 intr_en;
+
+	DRM_INFO("enable_vblank enter.\n");
+	if (!ctx->power_on)
+		(void)ade_power_up(ctx);
+
+	intr_en = readl(base + LDI_INT_EN);
+	intr_en |= LDI_ISR_FRAME_END_INT;
+	writel(intr_en, base + LDI_INT_EN);
 
+	return 0;
+}
+
+void ade_disable_vblank(struct drm_device *dev, int crtc_index)
+{
+	struct drm_crtc *crtc = hisi_get_crtc_from_index(dev, crtc_index);
+	struct ade_crtc *acrtc = to_ade_crtc(crtc);
+	struct ade_hw_ctx *ctx = acrtc->ctx;
+	void __iomem *base = ctx->base;
+	u32 intr_en;
+
+	DRM_INFO("disable_vblank enter.\n");
+	if (!ctx->power_on) {
+		DRM_ERROR("power is down! vblank disable fail\n");
+		return;
+	}
+	intr_en = readl(base + LDI_INT_EN);
+	intr_en &= ~LDI_ISR_FRAME_END_INT;
+	writel(intr_en, base + LDI_INT_EN);
+}
+
+static irqreturn_t ade_irq_handler(int irq, void *data)
+{
+	struct ade_crtc *acrtc = data;
+	struct ade_hw_ctx *ctx = acrtc->ctx;
+	struct drm_crtc *crtc = &acrtc->base;
+	struct drm_device *dev = crtc->dev;
+	void __iomem *base = ctx->base;
+	u32 status;
+
+	status = readl(base + LDI_MSK_INT);
+	/* DRM_INFO("LDI IRQ: status=0x%X\n",status); */
+
+	/* vblank irq */
+	if (status & LDI_ISR_FRAME_END_INT) {
+		writel(LDI_ISR_FRAME_END_INT, base + LDI_INT_CLR);
+		drm_handle_vblank(dev, drm_crtc_index(crtc));
+	}
+
+	return IRQ_HANDLED;
+}
 
 /*
  * set modules' reset mode: by software or hardware
@@ -858,6 +930,12 @@  static int ade_bind(struct device *dev, struct device *master, void *data)
 	if (ret)
 		return ret;
 
+	/* vblank irq init */
+	ret = request_irq(ctx->irq, ade_irq_handler, DRIVER_IRQ_SHARED,
+			  drm_dev->driver->name, acrtc);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_ade.h b/drivers/gpu/drm/hisilicon/hisi_drm_ade.h
new file mode 100644
index 0000000..d1d7b5d
--- /dev/null
+++ b/drivers/gpu/drm/hisilicon/hisi_drm_ade.h
@@ -0,0 +1,16 @@ 
+/*
+ * Copyright (c) 2014-2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __HISI_DRM_ADE_H__
+#define __HISI_DRM_ADE_H__
+
+int ade_enable_vblank(struct drm_device *dev, int crtc_index);
+void ade_disable_vblank(struct drm_device *dev, int crtc_index);
+
+#endif
diff --git a/drivers/gpu/drm/hisilicon/hisi_drm_drv.c b/drivers/gpu/drm/hisilicon/hisi_drm_drv.c
index d0eca80..13f59aa 100644
--- a/drivers/gpu/drm/hisilicon/hisi_drm_drv.c
+++ b/drivers/gpu/drm/hisilicon/hisi_drm_drv.c
@@ -21,6 +21,7 @@ 
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_atomic_helper.h>
 
+#include "hisi_drm_ade.h"
 #include "hisi_drm_drv.h"
 
 #define DRIVER_NAME	"hisi-drm"
@@ -29,6 +30,7 @@  static int hisi_drm_unload(struct drm_device *dev)
 {
 	struct hisi_drm_private *priv = dev->dev_private;
 
+	drm_vblank_cleanup(dev);
 	drm_mode_config_cleanup(dev);
 	devm_kfree(dev->dev, priv);
 	dev->dev_private = NULL;
@@ -76,11 +78,22 @@  static int hisi_drm_load(struct drm_device *dev, unsigned long flags)
 		goto err_mode_config_cleanup;
 	}
 
+	/* vblank init */
+	ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
+	if (ret) {
+		DRM_ERROR("failed to initialize vblank.\n");
+		goto err_unbind_all;
+	}
+	/* with irq_enabled = true, we can use the vblank feature. */
+	dev->irq_enabled = true;
+
 	/* reset all the states of crtc/plane/encoder/connector */
 	drm_mode_config_reset(dev);
 
 	return 0;
 
+err_unbind_all:
+	component_unbind_all(dev->dev, dev);
 err_mode_config_cleanup:
 	drm_mode_config_cleanup(dev);
 	devm_kfree(dev->dev, priv);
@@ -126,7 +139,7 @@  static int hisi_gem_cma_dumb_create(struct drm_file *file,
 
 static struct drm_driver hisi_drm_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME |
-				  DRIVER_ATOMIC,
+				  DRIVER_ATOMIC | DRIVER_HAVE_IRQ,
 	.load			= hisi_drm_load,
 	.unload                 = hisi_drm_unload,
 	.fops			= &hisi_drm_fops,
@@ -148,6 +161,10 @@  static struct drm_driver hisi_drm_driver = {
 	.gem_prime_vunmap	= drm_gem_cma_prime_vunmap,
 	.gem_prime_mmap		= drm_gem_cma_prime_mmap,
 
+	.get_vblank_counter	= drm_vblank_count,
+	.enable_vblank		= ade_enable_vblank,
+	.disable_vblank		= ade_disable_vblank,
+
 	.name			= "hisi",
 	.desc			= "Hisilicon SoCs' DRM Driver",
 	.date			= "20150718",