| Message ID | 1448971954-398-1-git-send-email-chaotian.jing@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 1 December 2015 at 13:12, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > there are too many error logs shown when use CMD21/CMD19 to do tune, > and it will appear at each resume time, print out so many logs to the > uart console cost too mush time. so change it to dev_dbg. > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> This one didn't apply to my next branch. Can you please rebase. Kind regards Uffe > --- > drivers/mmc/host/mtk-sd.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c > index 39568cc..34d23b8 100644 > --- a/drivers/mmc/host/mtk-sd.c > +++ b/drivers/mmc/host/mtk-sd.c > @@ -972,7 +972,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, > if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) { > data->bytes_xfered = data->blocks * data->blksz; > } else { > - dev_err(host->dev, "interrupt events: %x\n", events); > + dev_dbg(host->dev, "interrupt events: %x\n", events); > msdc_reset_hw(host); > host->error |= REQ_DAT_ERR; > data->bytes_xfered = 0; > @@ -982,10 +982,10 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, > else if (events & MSDC_INT_DATCRCERR) > data->error = -EILSEQ; > > - dev_err(host->dev, "%s: cmd=%d; blocks=%d", > + dev_dbg(host->dev, "%s: cmd=%d; blocks=%d", > __func__, mrq->cmd->opcode, data->blocks); > - dev_err(host->dev, "data_error=%d xfer_size=%d\n", > - (int)data->error, data->bytes_xfered); > + dev_dbg(host->dev, "data_error=%d xfer_size=%d\n", > + (int)data->error, data->bytes_xfered); > } > > msdc_data_xfer_next(host, mrq, data); > -- > 1.8.1.1.dirty >
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 39568cc..34d23b8 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -972,7 +972,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) { data->bytes_xfered = data->blocks * data->blksz; } else { - dev_err(host->dev, "interrupt events: %x\n", events); + dev_dbg(host->dev, "interrupt events: %x\n", events); msdc_reset_hw(host); host->error |= REQ_DAT_ERR; data->bytes_xfered = 0; @@ -982,10 +982,10 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, else if (events & MSDC_INT_DATCRCERR) data->error = -EILSEQ; - dev_err(host->dev, "%s: cmd=%d; blocks=%d", + dev_dbg(host->dev, "%s: cmd=%d; blocks=%d", __func__, mrq->cmd->opcode, data->blocks); - dev_err(host->dev, "data_error=%d xfer_size=%d\n", - (int)data->error, data->bytes_xfered); + dev_dbg(host->dev, "data_error=%d xfer_size=%d\n", + (int)data->error, data->bytes_xfered); } msdc_data_xfer_next(host, mrq, data);
there are too many error logs shown when use CMD21/CMD19 to do tune, and it will appear at each resume time, print out so many logs to the uart console cost too mush time. so change it to dev_dbg. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> --- drivers/mmc/host/mtk-sd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)