[1/3] ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846
diff mbox

Message ID 1449726399-12507-1-git-send-email-zyw@rock-chips.com
State New
Headers show

Commit Message

Chris Zhong Dec. 10, 2015, 5:46 a.m. UTC
According to the schematic, the name of REG8 should be vcc_tp, rather
than vcca_tp.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

 arch/arm/boot/dts/rk3288-evb-act8846.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Heiko Stuebner Dec. 11, 2015, 11:33 a.m. UTC | #1
Hi Chris

Am Donnerstag, 10. Dezember 2015, 13:46:37 schrieb Chris Zhong:
> According to the schematic, the name of REG8 should be vcc_tp, rather
> than vcca_tp.
> 
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>

applied all 3 to my dts32 branch for 4.5
[after making ARM in patch3 upper case ;-) ]


Thanks for keeping both board variants in sync
Heiko

Patch
diff mbox

diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 43949a6..53d8b08 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -152,7 +152,7 @@ 
 				regulator-always-on;
 			};
 
-			vcca_tp: REG8 {
+			vcc_tp: REG8 {
 				regulator-name = "VCCA_TP";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;