[v3,6/8] drm/rockchip: direct config connecter gate and out_mode
diff mbox

Message ID 1450321718-31389-1-git-send-email-mark.yao@rock-chips.com
State New
Headers show

Commit Message

yao mark Dec. 17, 2015, 3:08 a.m. UTC
Both connecter gate and out_mode are not conflict with mode set
configure. Direct setting connecter gate and out_mode, that allow
connector do rockchip_drm_crtc_mode_config after mode set.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
---
Changes in v3: None
Changes in v2: None
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c |   39 +++++++++++++--------------
 1 file changed, 18 insertions(+), 21 deletions(-)

Patch
diff mbox

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 9ace3ae..6ded4cc 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -89,9 +89,6 @@  struct vop {
 	struct drm_device *drm_dev;
 	bool is_enabled;
 
-	int connector_type;
-	int connector_out_mode;
-
 	/* mutex vsync_ work */
 	struct mutex vsync_mutex;
 	bool vsync_work_pending;
@@ -1018,8 +1015,24 @@  int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc,
 {
 	struct vop *vop = to_vop(crtc);
 
-	vop->connector_type = connector_type;
-	vop->connector_out_mode = out_mode;
+	if (WARN_ON(!vop->is_enabled))
+		return -EINVAL;
+
+	switch (connector_type) {
+	case DRM_MODE_CONNECTOR_LVDS:
+		VOP_CTRL_SET(vop, rgb_en, 1);
+		break;
+	case DRM_MODE_CONNECTOR_eDP:
+		VOP_CTRL_SET(vop, edp_en, 1);
+		break;
+	case DRM_MODE_CONNECTOR_HDMIA:
+		VOP_CTRL_SET(vop, hdmi_en, 1);
+		break;
+	default:
+		DRM_ERROR("unsupport connector_type[%d]\n", connector_type);
+		return -EINVAL;
+	};
+	VOP_CTRL_SET(vop, out_mode, out_mode);
 
 	return 0;
 }
@@ -1132,22 +1145,6 @@  static void vop_crtc_enable(struct drm_crtc *crtc)
 		vop_dsp_hold_valid_irq_disable(vop);
 	}
 
-	switch (vop->connector_type) {
-	case DRM_MODE_CONNECTOR_LVDS:
-		VOP_CTRL_SET(vop, rgb_en, 1);
-		break;
-	case DRM_MODE_CONNECTOR_eDP:
-		VOP_CTRL_SET(vop, edp_en, 1);
-		break;
-	case DRM_MODE_CONNECTOR_HDMIA:
-		VOP_CTRL_SET(vop, hdmi_en, 1);
-		break;
-	default:
-		DRM_ERROR("unsupport connector_type[%d]\n",
-			  vop->connector_type);
-	};
-	VOP_CTRL_SET(vop, out_mode, vop->connector_out_mode);
-
 	val = 0x8;
 	val |= (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) ? 0 : 1;
 	val |= (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) ? 0 : (1 << 1);