[v3] ASoC: fsl_sai: fix no frame clk in master mode
diff mbox

Message ID 4e56cafc5497654b0413418d41187e5b8f0023e3.1450428585.git.zidan.wang@freescale.com
State Accepted
Commit 3e3f8bd569558acefdfaae273d71f7a29b8c0b4f
Headers show

Commit Message

Zidan Wang Dec. 18, 2015, 8:53 a.m. UTC
After several open/close sai test with ctrl+c, there will be
I/O error. The SAI can't work anymore, can't recover. There
will be no frame clock. With adding the software reset in
trigger stop, the issue can be fixed.

This is a hardware bug/errata and reset is the only option.

According to the reference manual, the software reset doesn't
reset any control register but only internal hardware logics
such as bit clock generator, status flags, and FIFO pointers.
(Our purpose is just to reset the clock generator while the
software reset is the only way to do that.)

Since slave mode doesn't use the clock generator, only apply
the reset procedure to the master mode.

For asynchronous mode, TX will not be reset when RX is still
running. In this case, i can't reproduce this issue.

Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
1) refine the commit log and comments
2) Since slave mode doesn't use the clock generator, only apply
   the reset procedure to the master mode.
add a simple comment in code to describe the hardware bug.
 sound/soc/fsl/fsl_sai.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff mbox

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 8832901..fef264d 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -564,6 +564,24 @@  static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
 			regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
+			/*
+			 * For sai master mode, after several open/close sai,
+			 * there will be no frame clock, and can't recover
+			 * anymore. Add software reset to fix this issue.
+			 * This is a hardware bug, and will be fix in the
+			 * next sai version.
+			 */
+			if (!sai->is_slave_mode) {
+				/* Software Reset for both Tx and Rx */
+				regmap_write(sai->regmap,
+				regmap_write(sai->regmap,
+				/* Clear SR bit to finish the reset */
+				regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
+				regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
+			}