@@ -229,6 +229,12 @@ int kvm_mips_set_ipi_interrupt(MIPSCPU *cpu, int irq, int level)
#define KVM_REG_MIPS_CP0_CAUSE MIPS_CP0_32(13, 0)
#define KVM_REG_MIPS_CP0_EPC MIPS_CP0_64(14, 0)
#define KVM_REG_MIPS_CP0_PRID MIPS_CP0_32(15, 0)
+#define KVM_REG_MIPS_CP0_CONFIG MIPS_CP0_32(16, 0)
+#define KVM_REG_MIPS_CP0_CONFIG1 MIPS_CP0_32(16, 1)
+#define KVM_REG_MIPS_CP0_CONFIG2 MIPS_CP0_32(16, 2)
+#define KVM_REG_MIPS_CP0_CONFIG3 MIPS_CP0_32(16, 3)
+#define KVM_REG_MIPS_CP0_CONFIG4 MIPS_CP0_32(16, 4)
+#define KVM_REG_MIPS_CP0_CONFIG5 MIPS_CP0_32(16, 5)
#define KVM_REG_MIPS_CP0_ERROREPC MIPS_CP0_64(30, 0)
static inline int kvm_mips_put_one_reg(CPUState *cs, uint64_t reg_id,
@@ -304,6 +310,34 @@ static inline int kvm_mips_get_one_reg64(CPUState *cs, uint64 reg_id,
return kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &cp0reg);
}
+#define KVM_REG_MIPS_CP0_CONFIG_MASK (1U << CP0C0_M)
+#define KVM_REG_MIPS_CP0_CONFIG1_MASK (1U << CP0C1_M)
+#define KVM_REG_MIPS_CP0_CONFIG2_MASK (1U << CP0C2_M)
+#define KVM_REG_MIPS_CP0_CONFIG3_MASK (1U << CP0C3_M)
+#define KVM_REG_MIPS_CP0_CONFIG4_MASK (1U << CP0C4_M)
+#define KVM_REG_MIPS_CP0_CONFIG5_MASK 0
+
+static inline int kvm_mips_change_one_reg(CPUState *cs, uint64_t reg_id,
+ int32_t *addr, int32_t mask)
+{
+ int err;
+ int32_t tmp, change;
+
+ err = kvm_mips_get_one_reg(cs, reg_id, &tmp);
+ if (err < 0) {
+ return err;
+ }
+
+ /* only change bits in mask */
+ change = (*addr ^ tmp) & mask;
+ if (!change) {
+ return 0;
+ }
+
+ tmp = tmp ^ change;
+ return kvm_mips_put_one_reg(cs, reg_id, &tmp);
+}
+
/*
* We freeze the KVM timer when either the VM clock is stopped or the state is
* saved (the state is dirty).
@@ -526,6 +560,48 @@ static int kvm_mips_put_cp0_registers(CPUState *cs, int level)
DPRINTF("%s: Failed to put CP0_PRID (%d)\n", __func__, err);
ret = err;
}
+ err = kvm_mips_change_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG,
+ &env->CP0_Config0,
+ KVM_REG_MIPS_CP0_CONFIG_MASK);
+ if (err < 0) {
+ DPRINTF("%s: Failed to change CP0_CONFIG (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_change_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG1,
+ &env->CP0_Config1,
+ KVM_REG_MIPS_CP0_CONFIG1_MASK);
+ if (err < 0) {
+ DPRINTF("%s: Failed to change CP0_CONFIG1 (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_change_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG2,
+ &env->CP0_Config2,
+ KVM_REG_MIPS_CP0_CONFIG2_MASK);
+ if (err < 0) {
+ DPRINTF("%s: Failed to change CP0_CONFIG2 (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_change_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG3,
+ &env->CP0_Config3,
+ KVM_REG_MIPS_CP0_CONFIG3_MASK);
+ if (err < 0) {
+ DPRINTF("%s: Failed to change CP0_CONFIG3 (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_change_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG4,
+ &env->CP0_Config4,
+ KVM_REG_MIPS_CP0_CONFIG4_MASK);
+ if (err < 0) {
+ DPRINTF("%s: Failed to change CP0_CONFIG4 (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_change_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG5,
+ &env->CP0_Config5,
+ KVM_REG_MIPS_CP0_CONFIG5_MASK);
+ if (err < 0) {
+ DPRINTF("%s: Failed to change CP0_CONFIG5 (%d)\n", __func__, err);
+ ret = err;
+ }
err = kvm_mips_put_one_ulreg(cs, KVM_REG_MIPS_CP0_ERROREPC,
&env->CP0_ErrorEPC);
if (err < 0) {
@@ -617,6 +693,36 @@ static int kvm_mips_get_cp0_registers(CPUState *cs)
DPRINTF("%s: Failed to get CP0_PRID (%d)\n", __func__, err);
ret = err;
}
+ err = kvm_mips_get_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG, &env->CP0_Config0);
+ if (err < 0) {
+ DPRINTF("%s: Failed to get CP0_CONFIG (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_get_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG1, &env->CP0_Config1);
+ if (err < 0) {
+ DPRINTF("%s: Failed to get CP0_CONFIG1 (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_get_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG2, &env->CP0_Config2);
+ if (err < 0) {
+ DPRINTF("%s: Failed to get CP0_CONFIG2 (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_get_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG3, &env->CP0_Config3);
+ if (err < 0) {
+ DPRINTF("%s: Failed to get CP0_CONFIG3 (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_get_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG4, &env->CP0_Config4);
+ if (err < 0) {
+ DPRINTF("%s: Failed to get CP0_CONFIG4 (%d)\n", __func__, err);
+ ret = err;
+ }
+ err = kvm_mips_get_one_reg(cs, KVM_REG_MIPS_CP0_CONFIG5, &env->CP0_Config5);
+ if (err < 0) {
+ DPRINTF("%s: Failed to get CP0_CONFIG5 (%d)\n", __func__, err);
+ ret = err;
+ }
err = kvm_mips_get_one_ulreg(cs, KVM_REG_MIPS_CP0_ERROREPC,
&env->CP0_ErrorEPC);
if (err < 0) {
Implement saving and restoring to KVM state of the Config CP0 registers (namely Config, Config1, Config2, Config3, Config4, and Config5). These control the features available to a guest, and a few of the fields will soon be writeable by a guest so QEMU needs to know about them so as not to clobber them on migration/savevm. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> --- Changes in v2: - Fix line wrapping of kvm_mips_get_one_reg() calls from Config4 and Config5 (Leon). - Change (1 << x) to (1U << x) in important places to avoid compiler defined behaviour (Leon). --- target-mips/kvm.c | 106 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+)