diff mbox

[2/2] Revert "[media] tvp5150: Fix breakage for serial usage"

Message ID 841502d731f1708aae907d5bdf1659e8a372fc9a.1453799688.git.mchehab@osg.samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mauro Carvalho Chehab Jan. 26, 2016, 9:14 a.m. UTC 
This patch were a workaround for a regression at tvp5150, but
it causes troubles on devices with omap3+tvp5151 when working
in non-parallel bus mode.

Now that em28xx was fixed, we can get rid of that.

This reverts commit 47de9bf8931e6bf9c92fdba9867925d1ce482ab1.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
---
 drivers/media/i2c/tvp5150.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 779c6f453cc9..437f1a7ecb96 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -975,18 +975,19 @@  static int tvp5150_g_mbus_config(struct v4l2_subdev *sd,
 static int tvp5150_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct tvp5150 *decoder = to_tvp5150(sd);
+	/* Output format: 8-bit ITU-R BT.656 with embedded syncs */
+	int val = 0x09;
 
 	/* Output format: 8-bit 4:2:2 YUV with discrete sync */
-	if (decoder->mbus_type != V4L2_MBUS_PARALLEL)
-		return 0;
+	if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
+		val = 0x0d;
 
 	/* Initializes TVP5150 to its default values */
 	/* # set PCLK (27MHz) */
 	tvp5150_write(sd, TVP5150_CONF_SHARED_PIN, 0x00);
 
-	/* Output format: 8-bit ITU-R BT.656 with embedded syncs */
 	if (enable)
-		tvp5150_write(sd, TVP5150_MISC_CTL, 0x09);
+		tvp5150_write(sd, TVP5150_MISC_CTL, val);
 	else
 		tvp5150_write(sd, TVP5150_MISC_CTL, 0x00);