@@ -96,6 +96,7 @@
u8 flags;
#define FL_HFLIP 0x01 /* mirrored by default */
#define FL_VFLIP 0x02 /* vertical flipped by default */
+#define FL_EXPERIMENTAL 0x80 /* USB IDs based on heuristic without any known product */
u8 sof_read;
u8 autogain_ignore_frames;
@@ -1220,17 +1221,33 @@
};
/* -- module initialisation -- */
+/* Note on FL_EXPERIMENTAL:
+ * On the schematics in PixArt PAC7301/PAC7302 datasheet
+ * (http://www.pixart.com.tw/upload/PAC7301_7302%20%20Spec%20V1_20091228174030.pdf)
+ * pages 19, 20, 21 and 22 there is a note titled "PID IO_TRAP" which describes
+ * the possible product ID range 0x2620..0x262f. In this range there are some
+ * known webcams, however, there are some PIDs with unknown or future devices.
+ * Because PixArt PAC7301/PAC7302 is a System on a Chip (SoC) device is is
+ * probable that this driver will work correctly independent of the used PID.
+ */
static const struct usb_device_id device_table[] __devinitconst = {
{USB_DEVICE(0x06f8, 0x3009)},
{USB_DEVICE(0x093a, 0x2620)},
{USB_DEVICE(0x093a, 0x2621)},
{USB_DEVICE(0x093a, 0x2622), .driver_info = FL_VFLIP},
+ {USB_DEVICE(0x093a, 0x2623), .driver_info = FL_EXPERIMENTAL },
{USB_DEVICE(0x093a, 0x2624), .driver_info = FL_VFLIP},
+ {USB_DEVICE(0x093a, 0x2625), .driver_info = FL_EXPERIMENTAL },
{USB_DEVICE(0x093a, 0x2626)},
+ {USB_DEVICE(0x093a, 0x2627), .driver_info = FL_EXPERIMENTAL },
{USB_DEVICE(0x093a, 0x2628)},
{USB_DEVICE(0x093a, 0x2629), .driver_info = FL_VFLIP},
{USB_DEVICE(0x093a, 0x262a)},
+ {USB_DEVICE(0x093a, 0x262b), .driver_info = FL_EXPERIMENTAL },
{USB_DEVICE(0x093a, 0x262c)},
+ {USB_DEVICE(0x093a, 0x262d), .driver_info = FL_EXPERIMENTAL },
+ {USB_DEVICE(0x093a, 0x262e), .driver_info = FL_EXPERIMENTAL },
+ {USB_DEVICE(0x093a, 0x262f), .driver_info = FL_EXPERIMENTAL },
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
@@ -1239,6 +1256,17 @@
static int __devinit sd_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+ if ((u8)id->driver_info & FL_EXPERIMENTAL) {
+ PDEBUG(D_ERR | D_PROBE, "WARNING: USB device ID %04x:%04x is "
+ "not known, but based on some heuristics this driver "
+ "tries to handle it.",
+ id->idVendor, id->idProduct);
+ PDEBUG(D_ERR | D_PROBE, "WARNING: Plase send an email to "
+ "linux-media@vger.kernel.org with 'lsusb -v' output, "
+ "the vendor and name of the product and whether the "
+ "device is working or not.");
+ }
+
return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
THIS_MODULE);
}