diff mbox

[03/68] ARM: dts: porter: add DU DT support

Message ID c5af8a4248d3cb01078d2a20df28081dd588b0e3.1455303422.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit c5af8a4248d3cb01078d2a20df28081dd588b0e3
Headers show

Commit Message

Simon Horman Feb. 12, 2016, 7:04 p.m. UTC
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Define  the Porter board dependent part of the DU device node.
Add the device node  for Analog Devices ADV7511W  HDMI transmitter to I2C2
bus and the HDMI connector. Add the necessary subnodes to interconnect  DU
and HDMI devices.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-porter.dts | 81 ++++++++++++++++++++++++++++++++++++
 1 file changed, 81 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 6713b1ea732b..fe81fa0e478c 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -78,6 +78,29 @@ 
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
+	x3_clk: x3-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <148500000>;
+	};
+
+	x16_clk: x16-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
 };
 
 &extal_clk {
@@ -139,6 +162,11 @@ 
 		renesas,groups = "can0_data";
 		renesas,function = "can0";
 	};
+
+	du_pins: du {
+		renesas,groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+		renesas,function = "du";
+	};
 };
 
 &scif0 {
@@ -241,6 +269,38 @@ 
 			};
 		};
 	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+		};
+	};
 };
 
 &sata0 {
@@ -304,3 +364,24 @@ 
 
 	status = "okay";
 };
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+		 <&mstp7_clks R8A7791_CLK_DU1>,
+		 <&mstp7_clks R8A7791_CLK_LVDS0>,
+		 <&x3_clk>, <&x16_clk>;
+	clock-names = "du.0", "du.1", "lvds.0",
+		      "dclkin.0", "dclkin.1";
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&adv7511_in>;
+			};
+		};
+	};
+};