diff mbox

[68/68] ARM: dts: silk: Enable SCIF_CLK frequency and pins

Message ID c3373b09ba0391bcd9e992b0a2ce52d48d33e47b.1455303422.git.horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit c3373b09ba0391bcd9e992b0a2ce52d48d33e47b
Headers show

Commit Message

Simon Horman Feb. 12, 2016, 7:05 p.m. UTC
From: Geert Uytterhoeven <geert+renesas@glider.be>

Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.

This increases the range and accuracy of supported baud rates.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794-silk.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 98b8bcca84da..66f077a3ca41 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -126,11 +126,19 @@ 
 };
 
 &pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
 	scif2_pins: serial2 {
 		renesas,groups = "scif2_data";
 		renesas,function = "scif2";
 	};
 
+	scif_clk_pins: scif_clk {
+		renesas,groups = "scif_clk";
+		renesas,function = "scif_clk";
+	};
+
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -184,6 +192,11 @@ 
 	status = "okay";
 };
 
+&scif_clk {
+	clock-frequency = <14745600>;
+	status = "okay";
+};
+
 &ether {
 	pinctrl-0 = <&ether_pins &phy1_pins>;
 	pinctrl-names = "default";