@@ -240,9 +240,6 @@ static int __init omap3_beagle_i2c_init(void)
{
omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo,
ARRAY_SIZE(beagle_i2c_boardinfo));
-#ifdef CONFIG_I2C2_OMAP_BEAGLE
- omap_register_i2c_bus(2, 400, NULL, 0);
-#endif
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
omap_register_i2c_bus(3, 100, NULL, 0);
@@ -418,26 +418,10 @@ config I2C_OMAP
default y if MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes to this option, support will be included for the
- I2C interface on the Texas Instruments OMAP1/2/3 family of
- processors.
- Like OMAP1510/1610/1710/5912, OMAP242x, OMAP34x and OMAP35x.
+ I2C interface on the Texas Instruments OMAP1/2 family of processors.
+ Like OMAP1510/1610/1710/5912 and OMAP242x.
For details see http://www.ti.com/omap.
-config I2C2_OMAP_BEAGLE
- bool "Enable I2C2 for OMAP3 BeagleBoard"
- depends on ARCH_OMAP && MACH_OMAP3_BEAGLE
- select OMAP_MUX
- default n
- help
- Say Y here if you want to enable I2C bus 2 at OMAP3 based
- BeagleBoard.
- I2C2 at BeagleBoard is connected to expansion connector, i.e. unused
- if nothing is connected to this connector. As internal OMAP3 pull up
- resistors are not strong enough, enabled but unused I2C2 bus results
- in error messages (e.g. I2C timeouts). Enable this only if you have
- something connected to I2C2 at board's expansion connector and this
- extension has additional pull up resistors for I2C2 bus.
-
config I2C_PASEMI
tristate "PA Semi SMBus interface"
depends on PPC_PASEMI && PCI
This is manual revert for commit bae4b6a716ccf3247a1991d3c20b5e58ddd52890. CONFIG_I2C2_OMAP_BEAGLE is not needed anymore since additional busses can be registered on the command line by the commit ea9fcdaff4e9a6830833f3351eb44f6025df60e4. This change makes drivers/i2c/busses/Kconfig sync with the mainline. Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com> Cc: Dirk Behme <dirk.behme@gmail.com> --- arch/arm/mach-omap2/board-omap3beagle.c | 3 --- drivers/i2c/busses/Kconfig | 20 ++------------------ 2 files changed, 2 insertions(+), 21 deletions(-)