diff mbox

[1/3] dt-bindings: Add binding docs for V3D.

Message ID 1457123528-13482-2-git-send-email-eric@anholt.net (mailing list archive)
State New, archived
Headers show

Commit Message

Eric Anholt March 4, 2016, 8:32 p.m. UTC 
This was missed in the upstreaming process.

Signed-off-by: Eric Anholt <eric@anholt.net>
---
 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Rob Herring March 17, 2016, 11:53 a.m. UTC | #1 
On Fri, Mar 04, 2016 at 12:32:06PM -0800, Eric Anholt wrote:
> This was missed in the upstreaming process.
> 
> Signed-off-by: Eric Anholt <eric@anholt.net>
> ---
>  Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 12 ++++++++++++
>  1 file changed, 12 insertions(+)

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
index 56a961a..9f97df4 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
@@ -35,6 +35,12 @@  Optional properties for HDMI:
 		  as an interrupt/status bit in the HDMI controller
 		  itself).  See bindings/pinctrl/brcm,bcm2835-gpio.txt
 
+Required properties for V3D:
+- compatible:	Should be "brcm,bcm2835-v3d"
+- reg:		Physical base address and length of the V3D's registers
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
 Example:
 pixelvalve@7e807000 {
 	compatible = "brcm,bcm2835-pixelvalve2";
@@ -60,6 +66,12 @@  hdmi: hdmi@7e902000 {
 	clock-names = "pixel", "hdmi";
 };
 
+v3d: v3d@7ec00000 {
+	compatible = "brcm,bcm2835-v3d";
+	reg = <0x7ec00000 0x1000>;
+	interrupts = <1 10>;
+};
+
 vc4: gpu {
 	compatible = "brcm,bcm2835-vc4";
 };