[v3,6/9] irqchip/gic-v3: Parse and export virtual GIC information
diff mbox

Message ID 1457436573-6180-7-git-send-email-julien.grall@arm.com
State New
Headers show

Commit Message

Julien Grall March 8, 2016, 11:29 a.m. UTC
Fill up the recently introduced gic_kvm_info with the virtual GIC
information.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>

---
    Changes in v3:
        - Add ACPI support

    Changes in v2:
        - Use 0 rather than a negative value to know when the maintenance IRQ
        is not present.
        - Use resource for vcpu and vctrl
---
 drivers/irqchip/irq-gic-v3.c           | 85 +++++++++++++++++++++++++++++++++-
 include/linux/irqchip/arm-gic-common.h |  1 +
 2 files changed, 85 insertions(+), 1 deletion(-)

Comments

Christoffer Dall March 9, 2016, 5:53 a.m. UTC | #1
On Tue, Mar 08, 2016 at 11:29:30AM +0000, Julien Grall wrote:
> Fill up the recently introduced gic_kvm_info with the virtual GIC
> information.

this is not really virtual GIC information, it's information about the
hardware used for virtualization.

> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> 
> ---
>     Changes in v3:
>         - Add ACPI support
> 
>     Changes in v2:
>         - Use 0 rather than a negative value to know when the maintenance IRQ
>         is not present.
>         - Use resource for vcpu and vctrl
> ---
>  drivers/irqchip/irq-gic-v3.c           | 85 +++++++++++++++++++++++++++++++++-
>  include/linux/irqchip/arm-gic-common.h |  1 +
>  2 files changed, 85 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index 50e87e6..6ae25120 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -28,6 +28,7 @@
>  #include <linux/slab.h>
>  
>  #include <linux/irqchip.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  #include <linux/irqchip/arm-gic-v3.h>
>  
>  #include <asm/cputype.h>
> @@ -56,6 +57,8 @@ struct gic_chip_data {
>  static struct gic_chip_data gic_data __read_mostly;
>  static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
>  
> +static struct gic_kvm_info gic_v3_kvm_info;
> +
>  #define gic_data_rdist()		(this_cpu_ptr(gic_data.rdists.rdist))
>  #define gic_data_rdist_rd_base()	(gic_data_rdist()->rd_base)
>  #define gic_data_rdist_sgi_base()	(gic_data_rdist_rd_base() + SZ_64K)
> @@ -901,6 +904,37 @@ static int __init gic_validate_dist_version(void __iomem *dist_base)
>  	return 0;
>  }
>  
> +static void __init gic_of_setup_kvm_info(struct device_node *node)
> +{
> +	int ret;
> +	struct resource r;
> +	u32 gicv_idx;
> +
> +	gic_v3_kvm_info.type = GIC_V3;
> +
> +	gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
> +
> +	if (of_property_read_u32(node, "#redistributor-regions",
> +				 &gicv_idx))
> +		gicv_idx = 1;
> +
> +	gicv_idx += 3;	/* Also skip GICD, GICC, GICH */
> +	ret = of_address_to_resource(node, gicv_idx, &r);
> +	if (!ret) {
> +		if (!PAGE_ALIGNED(r.start))
> +			pr_warn("GICV physical address 0x%llx not page aligned\n",
> +				(unsigned long long)r.start);
> +		else if (!PAGE_ALIGNED(resource_size(&r)))
> +			pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n",
> +				(unsigned long long)resource_size(&r),
> +				PAGE_SIZE);
> +		else
> +			gic_v3_kvm_info.vcpu = r;
> +	}
> +
> +	gic_set_kvm_info(&gic_v3_kvm_info);

I have the same error handling concerns as the previous patch here.

> +}
> +
>  static int __init gic_of_init(struct device_node *node, struct device_node *parent)
>  {
>  	void __iomem *dist_base;
> @@ -952,8 +986,10 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
>  
>  	err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions,
>  			     redist_stride, &node->fwnode);
> -	if (!err)
> +	if (!err) {
> +		gic_of_setup_kvm_info(node);
>  		return 0;
> +	}
>  
>  out_unmap_rdist:
>  	for (i = 0; i < nr_redist_regions; i++)
> @@ -974,6 +1010,10 @@ static struct
>  	struct redist_region *redist_regs;
>  	u32 nr_redist_regions;
>  	bool single_redist;
> +	u32 maint_irq;
> +	int maint_irq_mode;
> +	phys_addr_t vctrl_base;
> +	phys_addr_t vcpu_base;
>  } acpi_data __initdata;
>  
>  static void __init
> @@ -1020,6 +1060,13 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header,
>  		return -ENOMEM;
>  
>  	gic_acpi_register_redist(gicc->gicr_base_address, redist_base);
> +
> +	acpi_data.maint_irq = gicc->vgic_interrupt;
> +	acpi_data.maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
> +				    ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
> +	acpi_data.vctrl_base = gicc->gich_base_address;
> +	acpi_data.vcpu_base = gicc->gicv_base_address;
> +
>  	return 0;
>  }
>  
> @@ -1111,6 +1158,40 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
>  }
>  
>  #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K)
> +#define ACPI_GICV2_VCTRL_MEM_SIZE	(SZ_4K)
> +#define ACPI_GICV2_VCPU_MEM_SIZE	(SZ_8K)
> +
> +static void __init gic_acpi_setup_kvm_info(void)
> +{
> +	int irq;
> +
> +	gic_v3_kvm_info.type = GIC_V3;
> +
> +	irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
> +				acpi_data.maint_irq_mode,
> +				ACPI_ACTIVE_HIGH);
> +	if (irq > 0)
> +		gic_v3_kvm_info.maint_irq = irq;
> +
> +	if (acpi_data.vctrl_base) {
> +		struct resource *vctrl = &gic_v3_kvm_info.vctrl;
> +
> +		vctrl->flags = IORESOURCE_MEM;
> +		vctrl->start = acpi_data.vctrl_base;
> +		vctrl->end = vctrl->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1;
> +	}
> +
> +	if (acpi_data.vcpu_base) {
> +		struct resource *vcpu = &gic_v3_kvm_info.vcpu;
> +
> +		vcpu->flags = IORESOURCE_MEM;
> +		vcpu->start = acpi_data.vcpu_base;
> +		vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
> +	}
> +
> +	gic_set_kvm_info(&gic_v3_kvm_info);

and here.

> +}
> +
>  
>  static int __init
>  gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
> @@ -1159,6 +1240,8 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
>  		goto out_fwhandle_free;
>  
>  	acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
> +	gic_acpi_setup_kvm_info();
> +
>  	return 0;
>  
>  out_fwhandle_free:
> diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h
> index f7723b9..15d68c6 100644
> --- a/include/linux/irqchip/arm-gic-common.h
> +++ b/include/linux/irqchip/arm-gic-common.h
> @@ -15,6 +15,7 @@
>  
>  enum gic_type {
>  	GIC_V2,
> +	GIC_V3,
>  };
>  
>  struct gic_kvm_info {
> -- 
> 1.9.1
> 

Thanks,
-Christoffer
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Graeme Gregory March 22, 2016, 11:27 a.m. UTC | #2
On Tue, Mar 08, 2016 at 11:29:30AM +0000, Julien Grall wrote:
> Fill up the recently introduced gic_kvm_info with the virtual GIC
> information.
> 
> Signed-off-by: Julien Grall <julien.grall@arm.com>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> 
> ---
>     Changes in v3:
>         - Add ACPI support
> 
>     Changes in v2:
>         - Use 0 rather than a negative value to know when the maintenance IRQ
>         is not present.
>         - Use resource for vcpu and vctrl
> ---
>  drivers/irqchip/irq-gic-v3.c           | 85 +++++++++++++++++++++++++++++++++-
>  include/linux/irqchip/arm-gic-common.h |  1 +
>  2 files changed, 85 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index 50e87e6..6ae25120 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -28,6 +28,7 @@
>  #include <linux/slab.h>
>  
>  #include <linux/irqchip.h>
> +#include <linux/irqchip/arm-gic-common.h>
>  #include <linux/irqchip/arm-gic-v3.h>
>  
>  #include <asm/cputype.h>
> @@ -56,6 +57,8 @@ struct gic_chip_data {
>  static struct gic_chip_data gic_data __read_mostly;
>  static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
>  
> +static struct gic_kvm_info gic_v3_kvm_info;
> +
>  #define gic_data_rdist()		(this_cpu_ptr(gic_data.rdists.rdist))
>  #define gic_data_rdist_rd_base()	(gic_data_rdist()->rd_base)
>  #define gic_data_rdist_sgi_base()	(gic_data_rdist_rd_base() + SZ_64K)
> @@ -901,6 +904,37 @@ static int __init gic_validate_dist_version(void __iomem *dist_base)
>  	return 0;
>  }
>  
> +static void __init gic_of_setup_kvm_info(struct device_node *node)
> +{
> +	int ret;
> +	struct resource r;
> +	u32 gicv_idx;
> +
> +	gic_v3_kvm_info.type = GIC_V3;
> +
> +	gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
> +
> +	if (of_property_read_u32(node, "#redistributor-regions",
> +				 &gicv_idx))
> +		gicv_idx = 1;
> +
> +	gicv_idx += 3;	/* Also skip GICD, GICC, GICH */
> +	ret = of_address_to_resource(node, gicv_idx, &r);
> +	if (!ret) {
> +		if (!PAGE_ALIGNED(r.start))
> +			pr_warn("GICV physical address 0x%llx not page aligned\n",
> +				(unsigned long long)r.start);
> +		else if (!PAGE_ALIGNED(resource_size(&r)))
> +			pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n",
> +				(unsigned long long)resource_size(&r),
> +				PAGE_SIZE);
> +		else
> +			gic_v3_kvm_info.vcpu = r;
> +	}
> +
> +	gic_set_kvm_info(&gic_v3_kvm_info);
> +}
> +
>  static int __init gic_of_init(struct device_node *node, struct device_node *parent)
>  {
>  	void __iomem *dist_base;
> @@ -952,8 +986,10 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare
>  
>  	err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions,
>  			     redist_stride, &node->fwnode);
> -	if (!err)
> +	if (!err) {
> +		gic_of_setup_kvm_info(node);
>  		return 0;
> +	}
>  
>  out_unmap_rdist:
>  	for (i = 0; i < nr_redist_regions; i++)
> @@ -974,6 +1010,10 @@ static struct
>  	struct redist_region *redist_regs;
>  	u32 nr_redist_regions;
>  	bool single_redist;
> +	u32 maint_irq;
> +	int maint_irq_mode;
> +	phys_addr_t vctrl_base;
> +	phys_addr_t vcpu_base;
>  } acpi_data __initdata;
>  
>  static void __init
> @@ -1020,6 +1060,13 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header,
>  		return -ENOMEM;
>  
>  	gic_acpi_register_redist(gicc->gicr_base_address, redist_base);
> +
> +	acpi_data.maint_irq = gicc->vgic_interrupt;
> +	acpi_data.maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
> +				    ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
> +	acpi_data.vctrl_base = gicc->gich_base_address;
> +	acpi_data.vcpu_base = gicc->gicv_base_address;
> +
>  	return 0;
>  }

Placing this here means that it will not collect the info in the case
where there is a Generic Interrupt Redistributor structure in the MADT.

I guess collecting this info should not be a side effect of happening to
pass GICC for redistributor base. Which unfortuneately probably means we
do need to parse the GICCs specifically for this information.

Graeme

>  
> @@ -1111,6 +1158,40 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
>  }
>  
>  #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K)
> +#define ACPI_GICV2_VCTRL_MEM_SIZE	(SZ_4K)
> +#define ACPI_GICV2_VCPU_MEM_SIZE	(SZ_8K)
> +
> +static void __init gic_acpi_setup_kvm_info(void)
> +{
> +	int irq;
> +
> +	gic_v3_kvm_info.type = GIC_V3;
> +
> +	irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
> +				acpi_data.maint_irq_mode,
> +				ACPI_ACTIVE_HIGH);
> +	if (irq > 0)
> +		gic_v3_kvm_info.maint_irq = irq;
> +
> +	if (acpi_data.vctrl_base) {
> +		struct resource *vctrl = &gic_v3_kvm_info.vctrl;
> +
> +		vctrl->flags = IORESOURCE_MEM;
> +		vctrl->start = acpi_data.vctrl_base;
> +		vctrl->end = vctrl->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1;
> +	}
> +
> +	if (acpi_data.vcpu_base) {
> +		struct resource *vcpu = &gic_v3_kvm_info.vcpu;
> +
> +		vcpu->flags = IORESOURCE_MEM;
> +		vcpu->start = acpi_data.vcpu_base;
> +		vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
> +	}
> +
> +	gic_set_kvm_info(&gic_v3_kvm_info);
> +}
> +
>  
>  static int __init
>  gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
> @@ -1159,6 +1240,8 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
>  		goto out_fwhandle_free;
>  
>  	acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
> +	gic_acpi_setup_kvm_info();
> +
>  	return 0;
>  
>  out_fwhandle_free:
> diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h
> index f7723b9..15d68c6 100644
> --- a/include/linux/irqchip/arm-gic-common.h
> +++ b/include/linux/irqchip/arm-gic-common.h
> @@ -15,6 +15,7 @@
>  
>  enum gic_type {
>  	GIC_V2,
> +	GIC_V3,
>  };
>  
>  struct gic_kvm_info {
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Julien Grall March 22, 2016, 12:02 p.m. UTC | #3
Hi Graeme,

On 22/03/16 11:27, Graeme Gregory wrote:
> On Tue, Mar 08, 2016 at 11:29:30AM +0000, Julien Grall wrote:
>> @@ -1020,6 +1060,13 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header,
>>   		return -ENOMEM;
>>
>>   	gic_acpi_register_redist(gicc->gicr_base_address, redist_base);
>> +
>> +	acpi_data.maint_irq = gicc->vgic_interrupt;
>> +	acpi_data.maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
>> +				    ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
>> +	acpi_data.vctrl_base = gicc->gich_base_address;
>> +	acpi_data.vcpu_base = gicc->gicv_base_address;
>> +
>>   	return 0;
>>   }
>
> Placing this here means that it will not collect the info in the case
> where there is a Generic Interrupt Redistributor structure in the MADT.
>
> I guess collecting this info should not be a side effect of happening to
> pass GICC for redistributor base. Which unfortuneately probably means we
> do need to parse the GICCs specifically for this information.

I noticed it while testing on some platform. It's now fixed and will be 
in the next version.

Regards,

Patch
diff mbox

diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 50e87e6..6ae25120 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -28,6 +28,7 @@ 
 #include <linux/slab.h>
 
 #include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic-common.h>
 #include <linux/irqchip/arm-gic-v3.h>
 
 #include <asm/cputype.h>
@@ -56,6 +57,8 @@  struct gic_chip_data {
 static struct gic_chip_data gic_data __read_mostly;
 static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE;
 
+static struct gic_kvm_info gic_v3_kvm_info;
+
 #define gic_data_rdist()		(this_cpu_ptr(gic_data.rdists.rdist))
 #define gic_data_rdist_rd_base()	(gic_data_rdist()->rd_base)
 #define gic_data_rdist_sgi_base()	(gic_data_rdist_rd_base() + SZ_64K)
@@ -901,6 +904,37 @@  static int __init gic_validate_dist_version(void __iomem *dist_base)
 	return 0;
 }
 
+static void __init gic_of_setup_kvm_info(struct device_node *node)
+{
+	int ret;
+	struct resource r;
+	u32 gicv_idx;
+
+	gic_v3_kvm_info.type = GIC_V3;
+
+	gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0);
+
+	if (of_property_read_u32(node, "#redistributor-regions",
+				 &gicv_idx))
+		gicv_idx = 1;
+
+	gicv_idx += 3;	/* Also skip GICD, GICC, GICH */
+	ret = of_address_to_resource(node, gicv_idx, &r);
+	if (!ret) {
+		if (!PAGE_ALIGNED(r.start))
+			pr_warn("GICV physical address 0x%llx not page aligned\n",
+				(unsigned long long)r.start);
+		else if (!PAGE_ALIGNED(resource_size(&r)))
+			pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n",
+				(unsigned long long)resource_size(&r),
+				PAGE_SIZE);
+		else
+			gic_v3_kvm_info.vcpu = r;
+	}
+
+	gic_set_kvm_info(&gic_v3_kvm_info);
+}
+
 static int __init gic_of_init(struct device_node *node, struct device_node *parent)
 {
 	void __iomem *dist_base;
@@ -952,8 +986,10 @@  static int __init gic_of_init(struct device_node *node, struct device_node *pare
 
 	err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions,
 			     redist_stride, &node->fwnode);
-	if (!err)
+	if (!err) {
+		gic_of_setup_kvm_info(node);
 		return 0;
+	}
 
 out_unmap_rdist:
 	for (i = 0; i < nr_redist_regions; i++)
@@ -974,6 +1010,10 @@  static struct
 	struct redist_region *redist_regs;
 	u32 nr_redist_regions;
 	bool single_redist;
+	u32 maint_irq;
+	int maint_irq_mode;
+	phys_addr_t vctrl_base;
+	phys_addr_t vcpu_base;
 } acpi_data __initdata;
 
 static void __init
@@ -1020,6 +1060,13 @@  gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header,
 		return -ENOMEM;
 
 	gic_acpi_register_redist(gicc->gicr_base_address, redist_base);
+
+	acpi_data.maint_irq = gicc->vgic_interrupt;
+	acpi_data.maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ?
+				    ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE;
+	acpi_data.vctrl_base = gicc->gich_base_address;
+	acpi_data.vcpu_base = gicc->gicv_base_address;
+
 	return 0;
 }
 
@@ -1111,6 +1158,40 @@  static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header,
 }
 
 #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K)
+#define ACPI_GICV2_VCTRL_MEM_SIZE	(SZ_4K)
+#define ACPI_GICV2_VCPU_MEM_SIZE	(SZ_8K)
+
+static void __init gic_acpi_setup_kvm_info(void)
+{
+	int irq;
+
+	gic_v3_kvm_info.type = GIC_V3;
+
+	irq = acpi_register_gsi(NULL, acpi_data.maint_irq,
+				acpi_data.maint_irq_mode,
+				ACPI_ACTIVE_HIGH);
+	if (irq > 0)
+		gic_v3_kvm_info.maint_irq = irq;
+
+	if (acpi_data.vctrl_base) {
+		struct resource *vctrl = &gic_v3_kvm_info.vctrl;
+
+		vctrl->flags = IORESOURCE_MEM;
+		vctrl->start = acpi_data.vctrl_base;
+		vctrl->end = vctrl->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1;
+	}
+
+	if (acpi_data.vcpu_base) {
+		struct resource *vcpu = &gic_v3_kvm_info.vcpu;
+
+		vcpu->flags = IORESOURCE_MEM;
+		vcpu->start = acpi_data.vcpu_base;
+		vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1;
+	}
+
+	gic_set_kvm_info(&gic_v3_kvm_info);
+}
+
 
 static int __init
 gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
@@ -1159,6 +1240,8 @@  gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end)
 		goto out_fwhandle_free;
 
 	acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle);
+	gic_acpi_setup_kvm_info();
+
 	return 0;
 
 out_fwhandle_free:
diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h
index f7723b9..15d68c6 100644
--- a/include/linux/irqchip/arm-gic-common.h
+++ b/include/linux/irqchip/arm-gic-common.h
@@ -15,6 +15,7 @@ 
 
 enum gic_type {
 	GIC_V2,
+	GIC_V3,
 };
 
 struct gic_kvm_info {