diff mbox

[1/2] MTD: pxa3xx_nand: fix nand detection issue

Message ID 1307440867-18993-1-git-send-email-leiwen@marvell.com (mailing list archive)
State New, archived
Headers show

Commit Message

Lei Wen June 7, 2011, 10:01 a.m. UTC
When keep_config is set, the detection would goes different routine.
That the driver would read out the setting which is set previously
by bootloader. While most bootloader keep the irq mask as off, and
current driver need all irq default open, keep_config behavior would
lead to no irq at all.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Cc: stable@kernel.org
---
 drivers/mtd/nand/pxa3xx_nand.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)

Comments

Artem Bityutskiy June 7, 2011, 11:16 a.m. UTC | #1
On Tue, 2011-06-07 at 03:01 -0700, Lei Wen wrote:
> When keep_config is set, the detection would goes different routine.
> That the driver would read out the setting which is set previously
> by bootloader. While most bootloader keep the irq mask as off, and
> current driver need all irq default open, keep_config behavior would
> lead to no irq at all.
> 
> Signed-off-by: Lei Wen <leiwen@marvell.com>
> Tested-by: Daniel Mack <zonque@gmail.com>
> Cc: stable@kernel.org

When the regression was introduced? Commit id?
Lei Wen June 7, 2011, 12:27 p.m. UTC | #2
Hi Artem,

On Tue, Jun 7, 2011 at 7:16 PM, Artem Bityutskiy <dedekind1@gmail.com> wrote:
> On Tue, 2011-06-07 at 03:01 -0700, Lei Wen wrote:
>> When keep_config is set, the detection would goes different routine.
>> That the driver would read out the setting which is set previously
>> by bootloader. While most bootloader keep the irq mask as off, and
>> current driver need all irq default open, keep_config behavior would
>> lead to no irq at all.
>>
>> Signed-off-by: Lei Wen <leiwen@marvell.com>
>> Tested-by: Daniel Mack <zonque@gmail.com>
>> Cc: stable@kernel.org
>
> When the regression was introduced? Commit id?

This regression should be introduced by below commit:

commit f8155a404db95656f1519b28fdb96cb68f8b2364
Author: Lei Wen <leiwen@marvell.com>
Date:   Mon Feb 28 10:32:11 2011 +0800

    mtd: pxa3xx_nand: rework irq logic

So its should be:
Cc: stable@kernel.org [2.6.38+]

Best regards,
Lei
Artem Bityutskiy June 7, 2011, 12:33 p.m. UTC | #3
On Tue, 2011-06-07 at 03:01 -0700, Lei Wen wrote:
> When keep_config is set, the detection would goes different routine.
> That the driver would read out the setting which is set previously
> by bootloader. While most bootloader keep the irq mask as off, and
> current driver need all irq default open, keep_config behavior would
> lead to no irq at all.
> 
> Signed-off-by: Lei Wen <leiwen@marvell.com>
> Tested-by: Daniel Mack <zonque@gmail.com>
> Cc: stable@kernel.org

Pushed both patches to l2-mtd-2.6.git, thanks.
diff mbox

Patch

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 1fb3b3a..faa0edd 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -813,7 +813,7 @@  static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
 	info->page_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
 	/* set info fields needed to read id */
 	info->read_id_bytes = (info->page_size == 2048) ? 4 : 2;
-	info->reg_ndcr = ndcr;
+	info->reg_ndcr = ndcr & ~NDCR_INT_MASK;
 	info->cmdset = &default_cmdset;
 
 	info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
@@ -882,7 +882,7 @@  static int pxa3xx_nand_scan(struct mtd_info *mtd)
 	struct pxa3xx_nand_info *info = mtd->priv;
 	struct platform_device *pdev = info->pdev;
 	struct pxa3xx_nand_platform_data *pdata = pdev->dev.platform_data;
-	struct nand_flash_dev pxa3xx_flash_ids[2] = { {NULL,}, {NULL,} };
+	struct nand_flash_dev pxa3xx_flash_ids[2], *def = NULL;
 	const struct pxa3xx_nand_flash *f = NULL;
 	struct nand_chip *chip = mtd->priv;
 	uint32_t id = -1;
@@ -942,8 +942,10 @@  static int pxa3xx_nand_scan(struct mtd_info *mtd)
 	pxa3xx_flash_ids[0].erasesize = f->page_size * f->page_per_block;
 	if (f->flash_width == 16)
 		pxa3xx_flash_ids[0].options = NAND_BUSWIDTH_16;
+	pxa3xx_flash_ids[1].name = NULL;
+	def = pxa3xx_flash_ids;
 KEEP_CONFIG:
-	if (nand_scan_ident(mtd, 1, pxa3xx_flash_ids))
+	if (nand_scan_ident(mtd, 1, def))
 		return -ENODEV;
 	/* calculate addressing information */
 	info->col_addr_cycles = (mtd->writesize >= 2048) ? 2 : 1;
@@ -954,9 +956,9 @@  KEEP_CONFIG:
 		info->row_addr_cycles = 2;
 	mtd->name = mtd_names[0];
 	chip->ecc.mode = NAND_ECC_HW;
-	chip->ecc.size = f->page_size;
+	chip->ecc.size = info->page_size;
 
-	chip->options = (f->flash_width == 16) ? NAND_BUSWIDTH_16 : 0;
+	chip->options = (info->reg_ndcr & NDCR_DWIDTH_M) ? NAND_BUSWIDTH_16 : 0;
 	chip->options |= NAND_NO_AUTOINCR;
 	chip->options |= NAND_NO_READRDY;