diff mbox

[RESEND] pinctrl: rockchip: add support the get_direction

Message ID 1457935279-7881-1-git-send-email-wxt@rock-chips.com (mailing list archive)
State New, archived
Headers show

Commit Message

Caesar Wang March 14, 2016, 6:01 a.m. UTC
This patch adds the get_direction to support the gpio
interface.

The gpio direction is not used on rockchip platform when use the gpio
debugfs.

Tested on kylin board. (RK3036 SoCs)
The repro steps:
$/sys/class/gpio/
echo 53 > export
$/sys/class/gpio/gpio53# cat direction
in
In general, the gpio53 should be out value, but the direction is the
default value 'in',  since the get_direction didn't supported in rockchip
pinctrl.

So, we should add this patch to support it.

Reported-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-gpio@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org

---

Changes in RESEND:
- Remove the change-id

 drivers/pinctrl/pinctrl-rockchip.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Heiko Stübner March 14, 2016, 10:36 p.m. UTC | #1
Hi Caesar,

Am Montag, 14. März 2016, 14:01:19 schrieb Caesar Wang:
> This patch adds the get_direction to support the gpio
> interface.
> 
> The gpio direction is not used on rockchip platform when use the gpio
> debugfs.
> 
> Tested on kylin board. (RK3036 SoCs)
> The repro steps:
> $/sys/class/gpio/
> echo 53 > export
> $/sys/class/gpio/gpio53# cat direction
> in
> In general, the gpio53 should be out value, but the direction is the
> default value 'in',  since the get_direction didn't supported in rockchip
> pinctrl.
> 
> So, we should add this patch to support it.
> 
> Reported-by: Jeffy Chen <jeffy.chen@rock-chips.com>
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Heiko Stuebner <heiko@sntech.de>
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-rockchip@lists.infradead.org
> 
> ---
> 
> Changes in RESEND:
> - Remove the change-id
> 
>  drivers/pinctrl/pinctrl-rockchip.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/pinctrl/pinctrl-rockchip.c
> b/drivers/pinctrl/pinctrl-rockchip.c index bf032b9..f22a186 100644
> --- a/drivers/pinctrl/pinctrl-rockchip.c
> +++ b/drivers/pinctrl/pinctrl-rockchip.c
> @@ -1208,6 +1208,18 @@ static int rockchip_pmx_set(struct pinctrl_dev
> *pctldev, unsigned selector, return 0;
>  }
> 
> +static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned
> offset) +{
> +	struct rockchip_pin_bank *bank = gpiochip_get_data(chip);
> +	int pin;
> +	u32 data;
> +
> +	pin = offset - chip->base;
> +	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
> +
> +	return !!(data & BIT(pin));

TRM (at least rk3288 and rk3036) says for the SWPORT_DDR register:
(data & BIT(pin)) = 0 = input
(data & BIT(pin)) = 1 = output

struct gpio_chip docs [0] says:
@get_direction: returns 0=out, 1=in,


So shouldn't that be
	return !(data & BIT(pin));
with only one "!" instead of two?
Or as happens sometimes, am I just blind? :-)


Thanks
Heiko

[0] http://lxr.free-electrons.com/source/include/linux/gpio/driver.h#L33
diff mbox

Patch

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index bf032b9..f22a186 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -1208,6 +1208,18 @@  static int rockchip_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
 	return 0;
 }
 
+static int rockchip_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+	struct rockchip_pin_bank *bank = gpiochip_get_data(chip);
+	int pin;
+	u32 data;
+
+	pin = offset - chip->base;
+	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
+
+	return !!(data & BIT(pin));
+}
+
 /*
  * The calls to gpio_direction_output() and gpio_direction_input()
  * leads to this function call (via the pinctrl_gpio_direction_{input|output}()
@@ -1741,6 +1753,7 @@  static const struct gpio_chip rockchip_gpiolib_chip = {
 	.free = gpiochip_generic_free,
 	.set = rockchip_gpio_set,
 	.get = rockchip_gpio_get,
+	.get_direction	= rockchip_gpio_get_direction,
 	.direction_input = rockchip_gpio_direction_input,
 	.direction_output = rockchip_gpio_direction_output,
 	.to_irq = rockchip_gpio_to_irq,