diff mbox

SPI troubles

Message ID 4b9d9f11.9a15f10a.3902.6dc3@mx.google.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Ben Gamari March 15, 2010, 2:44 a.m. UTC
None
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 231cb4e..b23c5a5 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -12,6 +12,10 @@ 
  * published by the Free Software Foundation.
  */
 
+//#define BEAGLE_GPIO_SPI
+
+
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -28,6 +32,7 @@ 
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 
+#include <linux/spi/spi.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
 
@@ -372,6 +377,159 @@  static struct platform_device *omap3_beagle_devices[] __initdata = {
 	&keys_gpio,
 };
 
+#ifndef BEAGLE_GPIO_SPI
+
+static void __init omap3_beagle_config_mcspi3_mux(void)
+{
+	omap_mux_init_signal("sdmmc2_clk.mcspi3_clk", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdmmc2_dat3.mcspi3_cs0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdmmc2_dat2.mcspi3_cs1", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdmmc2_cmd.mcspi3_simo", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdmmc2_dat0.mcspi3_somi", OMAP_PIN_INPUT_PULLUP);
+}
+
+static void __init omap3_beagle_config_mcspi4_mux(void)
+{
+	omap_mux_init_signal("mcbsp1_clkr.mcspi4_clk", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("mcbsp1_fsx.mcspi4_cs0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("mcbsp1_dx.mcspi4_simo", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("mcbsp1_dr.mcspi4_somi", OMAP_PIN_INPUT_PULLUP);
+}
+
+static struct spi_board_info beagle_mcspi_board_info[] = {
+	// spi 3.0
+	{
+		.modalias	= "spidev",
+		.max_speed_hz	= 48000000, //48 Mbps
+		.bus_num	= 3,
+		.chip_select	= 0,	
+		.mode = SPI_MODE_1,
+	},
+
+	// spi 3.1
+	{
+		.modalias	= "spidev",
+		.max_speed_hz	= 48000000, //48 Mbps
+		.bus_num	= 3,
+		.chip_select	= 1,	
+		.mode = SPI_MODE_1,
+	},
+
+	// spi 4.0
+	{
+		.modalias	= "spidev",
+		.max_speed_hz	= 48000000, //48 Mbps
+		.bus_num	= 4,
+		.chip_select	= 0,	
+		.mode = SPI_MODE_1,
+	},
+};
+
+#else /* BEAGLE_GPIO_SPI */
+#include <linux/spi/spi_gpio.h>
+
+#define SPI3_CLK 130
+#define SPI3_SOMI 132
+#define SPI3_SIMO 131
+#define SPI3_CS0 135
+#define SPI3_CS1 134
+
+#define SPI4_CLK 156
+#define SPI4_SOMI 159
+#define SPI4_SIMO 158
+#define SPI4_CS0 161
+
+#define GPIO_SPI_PIN(pin, dir, name)  \
+	omap_mux_init_gpio(pin, OMAP_PIN_##dir); \
+	gpio_request(pin, name); \
+	gpio_export(pin, true);
+
+static void __init omap3_beagle_config_gpio_spi3_mux(void)
+{
+	GPIO_SPI_PIN(SPI3_CLK, OUTPUT, "spi3_clk");
+	GPIO_SPI_PIN(SPI3_SIMO, OUTPUT, "spi3_simo");
+	GPIO_SPI_PIN(SPI3_SOMI, INPUT, "spi3_somi");
+	GPIO_SPI_PIN(SPI3_CS0, OUTPUT, "spi3_cs0");
+	GPIO_SPI_PIN(SPI3_CS1, OUTPUT, "spi3_cs1");
+}
+
+static void __init omap3_beagle_config_gpio_spi4_mux(void)
+{
+	GPIO_SPI_PIN(SPI4_CLK, OUTPUT, "spi4_clk");
+	GPIO_SPI_PIN(SPI4_SIMO, OUTPUT, "spi4_simo");
+	GPIO_SPI_PIN(SPI4_SOMI, INPUT, "spi4_somi");
+	GPIO_SPI_PIN(SPI4_CS0, OUTPUT, "spi4_cs0");
+}
+
+static struct spi_gpio_platform_data beagle_gpio_spi_platform_data[] = {
+	// spi 3
+	{
+		.sck = SPI3_CLK,
+		.miso = SPI3_SOMI,
+		.mosi = SPI3_SIMO,
+		.num_chipselect = 2,
+	},
+
+	// spi 4
+	{
+		.sck = SPI4_CLK,
+		.miso = SPI4_SOMI,
+		.mosi = SPI4_SIMO,
+		.num_chipselect = 1,
+	},
+};
+
+static struct platform_device beagle_gpio_spi_platform_device[] = {
+	// spi .
+	{
+		.name		= "spi_gpio",
+		.id		= 3,
+		.dev		= {
+			.platform_data = &beagle_gpio_spi_platform_data[0],
+		},
+	},
+
+	// spi 4
+	{
+		.name		= "spi_gpio",
+		.id		= 4,
+		.dev		= {
+			.platform_data = &beagle_gpio_spi_platform_data[1],
+		},
+	},
+};
+
+static struct spi_board_info beagle_gpio_spi_board_info[] = {
+	// spi 3.0
+	{
+		.modalias	= "spidev",
+		.max_speed_hz	= 48000000, //48 Mbps
+		.bus_num	= 3,
+		.mode = SPI_MODE_1,
+		.controller_data = (void *) SPI3_CS0,
+	},
+
+	// spi 3.1
+	{
+		.modalias	= "spidev",
+		.max_speed_hz	= 48000000, //48 Mbps
+		.bus_num	= 3,
+		.mode = SPI_MODE_1,
+		.controller_data = (void *) SPI3_CS1,
+	},
+
+	// spi 4.0
+	{
+		.modalias	= "spidev",
+		.max_speed_hz	= 48000000, //48 Mbps
+		.bus_num	= 4,
+		.mode = SPI_MODE_1,
+		.controller_data = (void *) SPI4_CS0,
+	},
+};
+
+#endif /* BEAGLE_GPIO_SPI */
+
 static void __init omap3beagle_flash_init(void)
 {
 	u8 cs = 0;
@@ -432,12 +590,30 @@  static struct omap_board_mux board_mux[] __initdata = {
 
 static void __init omap3_beagle_init(void)
 {
+	int i;
+
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
 	omap_serial_init();
 
+#ifndef BEAGLE_GPIO_SPI
+	printk(KERN_ERR "Using McSPI for SPI\n");
+	omap3_beagle_config_mcspi3_mux();
+	omap3_beagle_config_mcspi4_mux();
+	spi_register_board_info(beagle_mcspi_board_info,
+			ARRAY_SIZE(beagle_mcspi_board_info));
+#else
+	printk(KERN_ERR "Using GPIO for SPI\n");
+	omap3_beagle_config_gpio_spi3_mux();
+	omap3_beagle_config_gpio_spi4_mux();
+	for (i=0; i<3; i++)
+		platform_device_register(&beagle_gpio_spi_platform_device[i]);
+	spi_register_board_info(beagle_gpio_spi_board_info,
+			ARRAY_SIZE(beagle_gpio_spi_board_info));
+#endif
+
 	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
 	gpio_request(170, "DVI_nPD");
 	/* REVISIT leave DVI powered down until it's needed ... */
@@ -458,6 +634,7 @@  static void __init omap3_beagle_map_io(void)
 	omap2_map_common_io();
 }
 
+
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
 	.phys_io	= 0x48000000,