diff mbox

[v4,6/9] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk

Message ID 1459392485-11327-7-git-send-email-cw00.choi@samsung.com (mailing list archive)
State Accepted
Headers show

Commit Message

Chanwoo Choi March 31, 2016, 2:48 a.m. UTC
This patch adds initial pin configuration of MMC2 device on exynos3250-monk
board because the MMC2 gpio pin (gpk2[0-6]) are NC (not connected) state.

Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos3250-monk.dts | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

Comments

Krzysztof Kozlowski March 31, 2016, 4:46 a.m. UTC | #1
On 31.03.2016 11:48, Chanwoo Choi wrote:
> This patch adds initial pin configuration of MMC2 device on exynos3250-monk
> board because the MMC2 gpio pin (gpk2[0-6]) are NC (not connected) state.
> 
> Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos3250-monk.dts | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)

Thanks, applied this one for v4.7 with adjusted title.

I'll wait with other patches for Sylwester's branch/tag.

Best regards,
Krzysztof


--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 9e2840b59ae8..267f81adb42f 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -558,7 +558,17 @@ 
 
 &pinctrl_1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
+	pinctrl-0 = <&initial1 &sleep1>;
+
+	initial1: initial-state {
+		PIN_IN(gpk2-0, DOWN, LV1);
+		PIN_IN(gpk2-1, DOWN, LV1);
+		PIN_IN(gpk2-2, DOWN, LV1);
+		PIN_IN(gpk2-3, DOWN, LV1);
+		PIN_IN(gpk2-4, DOWN, LV1);
+		PIN_IN(gpk2-5, DOWN, LV1);
+		PIN_IN(gpk2-6, DOWN, LV1);
+	};
 
 	sleep1: sleep-state {
 		PIN_SLP(gpe0-0, PREV, NONE);