| Message ID | 1460528887-22915-1-git-send-email-simhavcs@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Wed, Apr 13, 2016 at 11:58:04AM +0530, Vinay Simha BN wrote: > Add support for the JDI lt070me05000 WUXGA DSI panel used in > Nexus 7 2013 devices. > > Programming sequence for the panel is was originally found in the > android-msm-flo-3.4-lollipop-release branch from: > https://android.googlesource.com/kernel/msm.git > > And video mode setting is from dsi-panel-jdi-dualmipi1-video.dtsi > file in: > git://codeaurora.org/kernel/msm-3.10.git LNX.LA.3.6_rb1.27 > > Other fixes folded in were provided > by Archit Taneja <archit.taneja@gmail.com> > > Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> > [sumit.semwal: Ported to the drm/panel framework] > Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> > [jstultz: Cherry-picked to mainline, folded down other fixes > from Vinay and Archit] > Signed-off-by: John Stultz <john.stultz@linaro.org> > --- > .../bindings/display/panel/jdi,lt070me05000.txt | 27 + > .../devicetree/bindings/vendor-prefixes.txt | 1 + > drivers/gpu/drm/panel/Kconfig | 11 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 685 +++++++++++++++++++++ > 5 files changed, 725 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > create mode 100644 drivers/gpu/drm/panel/panel-jdi-lt070me05000.c What's the difference between this and the patch you sent earlier? I'm going to assume that the newer one is the correct patch, so I'll ignore the previous patch. > diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > new file mode 100644 > index 0000000..35c5ac7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt The binding documentation should be a separate patch. > @@ -0,0 +1,27 @@ > +JDI model LT070ME05000 1920x1200 7" DSI Panel > + > +Basic data sheet is at: > + http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet > + > +This panel has video mode implemented currently in the driver. That's information irrelevant to the DT binding, since you're presumably talking about the Linux drm/panel driver, whereas the DT binding is supposed to specify the description of the panel hardware in OS-agnostic terms. > +Required properties: > +- compatible: should be "jdi,lt070me05000" > + > +Optional properties: > +- power-supply: phandle of the regulator that provides the supply voltage > +- reset-gpio: phandle of gpio for reset line > +- backlight: phandle of the backlight device attached to the panel > + > +Example: > + > + dsi@54300000 { > + panel: panel@0 { > + compatible = "jdi,lt070me05000"; > + reg = <0>; > + > + power-supply = <...>; > + reset-gpio = <...>; > + backlight = <...>; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index a580f3e..ec42bb4 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -130,6 +130,7 @@ invensense InvenSense Inc. > isee ISEE 2007 S.L. > isil Intersil > issi Integrated Silicon Solutions Inc. > +jdi Japan Display Inc. > jedec JEDEC Solid State Technology Association > karo Ka-Ro electronics GmbH > keymile Keymile GmbH This should be a separate patch as well. > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 1500ab9..f41690e 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -61,6 +61,17 @@ config DRM_PANEL_SHARP_LQ101R1SX01 > To compile this driver as a module, choose M here: the module > will be called panel-sharp-lq101r1sx01. > > +config DRM_PANEL_JDI_LT070ME05000 > + tristate "JDI LT070ME05000 WUXGA DSI panel" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y here if you want to enable support for JDI WUXGA DSI video/ > + command mode panel as found in Google Nexus 7 (2013) devices. > + The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses > + 24 bit RGB per pixel. > + > config DRM_PANEL_SHARP_LS043T1LE01 > tristate "Sharp LS043T1LE01 qHD video mode panel" > depends on OF Please keep these sorted alphabetically. I do realize that the list isn't sorted quite correctly at the moment, so you may as well leave this as-is and I'll fix up the order when applying and after fixing the current ordering. > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index f277eed..e6c6fc8 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -5,3 +5,4 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o > obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o > obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o > +obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o Same here. > diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c > new file mode 100644 > index 0000000..051aa1b > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c > @@ -0,0 +1,685 @@ > +/* > + * Copyright (C) 2015 InforceComputing > + * Author: Vinay Simha BN <simhavcs@gmail.com> > + * > + * Copyright (C) 2015 Linaro Ltd > + * Author: Sumit Semwal <sumit.semwal@linaro.org> Should either of those copyright lines include 2016? We're a pretty good way into 2016, and I'd be surprised if this wasn't touched this year at all. > +/* > + * From internet archives, the panel for Nexus 7 2nd Gen, 2013 model is a > + * JDI model LT070ME05000, and its data sheet is at: > + * http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet > + */ This comment is oddly placed here above the struct jdi_panel definition. Perhaps move that information into the header comment? > +struct jdi_panel { > + struct drm_panel base; > + struct mipi_dsi_device *dsi; > + > + /* TODO: Add backilght support */ "backlight". Also if this is still TODO, why even have parts of the code here? Just drop everything that's not used and move that to a follow-up patch that implements full support. > + struct backlight_device *backlight; > + struct regulator *supply; > + struct gpio_desc *reset_gpio; > + struct gpio_desc *enable_gpio; > + struct gpio_desc *vcc_gpio; > + > + struct regulator *backlit; > + struct regulator *lvs7; > + struct regulator *avdd; > + struct regulator *iovdd; > + struct gpio_desc *pwm_gpio; Most of these resources aren't specified in the device tree binding, so your driver doesn't properly implement the binding. You'll have to fix the driver or the binding. > + > + bool prepared; > + bool enabled; > + > + const struct drm_display_mode *mode; > +}; > + > +static inline struct jdi_panel *to_jdi_panel(struct drm_panel *panel) > +{ > + return container_of(panel, struct jdi_panel, base); > +} > + > +static char MCAP[2] = {0xB0, 0x00}; > +static char interface_setting_cmd[6] = {0xB3, 0x04, 0x08, 0x00, 0x22, 0x00}; > +static char interface_setting[6] = {0xB3, 0x26, 0x08, 0x00, 0x20, 0x00}; Please make all of these (and the ones below) arrays of u8, since that's the type used in the prototype of the function that receives these as parameters. Also, please use consistent capitalization and a space after { and before }. > +static char interface_ID_setting[2] = {0xB4, 0x0C}; > +static char DSI_control[3] = {0xB6, 0x3A, 0xD3}; > + > +static char tear_scan_line[3] = {0x44, 0x03, 0x00}; This is a standard DCS command, please turn this into a generic helper such as mipi_dsi_dcs_set_tear_scanline(). > +/* for fps control, set fps to 60.32Hz */ > +static char LTPS_timing_setting[2] = {0xC6, 0x78}; > +static char sequencer_timing_control[2] = {0xD6, 0x01}; > + > +/* set brightness */ > +static char write_display_brightness[] = {0x51, 0xFF}; Same here. > +/* enable LEDPWM pin output, turn on LEDPWM output, turn off pwm dimming */ > +static char write_control_display[] = {0x53, 0x24}; And here. > +/* > + * choose cabc mode, 0x00(-0%), 0x01(-15%), 0x02(-40%), 0x03(-54%), > + * disable SRE(sunlight readability enhancement) > + */ > +static char write_cabc[] = {0x55, 0x00}; And here. > +static int jdi_panel_init(struct jdi_panel *jdi) > +{ > + struct mipi_dsi_device *dsi = jdi->dsi; > + int ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { > + ret = mipi_dsi_dcs_soft_reset(dsi); > + if (ret < 0) > + return ret; > + > + mdelay(10); Please don't use mdelay() because it will busy-loop for a very long time and waste precious CPU cycles. Instead, use usleep_range() for these cases (or msleep() for durations longer than ~10 ms). Same goes for the other occurrences below. > + > + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x70); > + if (ret < 0) > + return ret; There are symbolic constants for the pixel formats, use them to convey meaning. > + > + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x04AF); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F); > + if (ret < 0) > + return ret; These should be parameterized on the panel width and height, to make it clear where the values come from. > + > + ret = mipi_dsi_dcs_set_tear_on(dsi, > + MIPI_DSI_DCS_TEAR_MODE_VBLANK); > + if (ret < 0) > + return ret; > + mdelay(5); > + > + ret = mipi_dsi_generic_write(dsi, tear_scan_line, > + sizeof(tear_scan_line)); > + if (ret < 0) > + return ret; Like I mentioned earlier, this should be a generic helper to help make its intention clearer. > + > + ret = mipi_dsi_dcs_write_buffer(dsi, write_display_brightness, > + sizeof(write_display_brightness) > + ); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_write_buffer(dsi, write_control_display, > + sizeof(write_control_display)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc, > + sizeof(write_cabc)); > + if (ret < 0) > + return ret; Same for these. I don't currently have access to the DCS 1.3 specification, but I suspect that some of the parameters for these commands could be defined via symbolic names. > + > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); > + if (ret < 0) > + return ret; > + mdelay(120); > + > + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); > + if (ret < 0) > + return ret; > + mdelay(10); > + > + ret = mipi_dsi_generic_write(dsi, interface_setting, > + sizeof(interface_setting)); > + if (ret < 0) > + return ret; > + mdelay(20); > + > + backlight_control4[18] = 0x04; > + backlight_control4[19] = 0x00; > + > + ret = mipi_dsi_generic_write(dsi, backlight_control4, > + sizeof(backlight_control4)); > + if (ret < 0) > + return ret; > + mdelay(20); > + > + MCAP[1] = 0x03; > + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); > + if (ret < 0) > + return ret; That's odd. Doesn't this break idempotence of this function? You modify the global MCAP array by writing 0x03 to MCAP[1], so when this function is called a second time, MCAP[1] will be 0x03 already in the first call a few lines above, instead of the 0x00 that it was initially. > + } else { > + /* > + * TODO : need to verify panel settings when > + * dsi cmd mode supported for apq8064 - simhavcs > + */ > + ret = mipi_dsi_dcs_soft_reset(dsi); > + if (ret < 0) > + return ret; This whole else clause is dead code because the condition for the if clause is always true. Just drop it and add it back when you properly support both modes. > +static int jdi_panel_on(struct jdi_panel *jdi) > +{ > + struct mipi_dsi_device *dsi = jdi->dsi; > + int ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_set_display_on(dsi); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static int jdi_panel_off(struct jdi_panel *jdi) > +{ > + struct mipi_dsi_device *dsi = jdi->dsi; > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; Should this not be cleared at the end of the function so that the below commands still get run in LP mode? > + > + ret = mipi_dsi_dcs_set_display_off(dsi); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_tear_off(dsi); > + if (ret < 0) > + return ret; > + > + msleep(100); > + > + return 0; > +} > + > +static int jdi_panel_disable(struct drm_panel *panel) > +{ > + struct jdi_panel *jdi = to_jdi_panel(panel); > + > + if (!jdi->enabled) > + return 0; > + > + DRM_DEBUG("disable\n"); This doesn't look very useful debug information. I think you should remove it. Same for other similar occurrences below. > +static const struct drm_panel_funcs jdi_panel_funcs = { > + .disable = jdi_panel_disable, > + .unprepare = jdi_panel_unprepare, > + .prepare = jdi_panel_prepare, > + .enable = jdi_panel_enable, > + .get_modes = jdi_panel_get_modes, > +}; > + > +static const struct of_device_id jdi_of_match[] = { > + { .compatible = "jdi,lt070me05000", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, jdi_of_match); A single tab is enough to indent the above. > +static int jdi_panel_add(struct jdi_panel *jdi) > +{ > + struct device *dev = &jdi->dsi->dev; > + int ret; > + > + jdi->mode = &default_mode; What do you keep this around for? > + > + /* lvs5 */ > + jdi->supply = devm_regulator_get(dev, "power"); > + if (IS_ERR(jdi->supply)) > + return PTR_ERR(jdi->supply); > + > + /* l17 */ > + jdi->backlit = devm_regulator_get(dev, "backlit"); > + if (IS_ERR(jdi->supply)) > + return PTR_ERR(jdi->supply); > + > + jdi->lvs7 = devm_regulator_get(dev, "lvs7"); > + if (IS_ERR(jdi->lvs7)) > + return PTR_ERR(jdi->lvs7); > + > + jdi->avdd = devm_regulator_get(dev, "avdd"); > + if (IS_ERR(jdi->avdd)) > + return PTR_ERR(jdi->avdd); > + > + jdi->iovdd = devm_regulator_get(dev, "iovdd"); > + if (IS_ERR(jdi->iovdd)) > + return PTR_ERR(jdi->iovdd); > + > + jdi->vcc_gpio = devm_gpiod_get(dev, "vcc", GPIOD_OUT_LOW); > + if (IS_ERR(jdi->vcc_gpio)) { > + dev_err(dev, "cannot get vcc-gpio %ld\n", > + PTR_ERR(jdi->vcc_gpio)); > + jdi->vcc_gpio = NULL; > + } else { > + gpiod_direction_output(jdi->vcc_gpio, 0); > + } > + > + jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(jdi->reset_gpio)) { > + dev_err(dev, "cannot get reset-gpios %ld\n", > + PTR_ERR(jdi->reset_gpio)); > + jdi->reset_gpio = NULL; > + } else { > + gpiod_direction_output(jdi->reset_gpio, 0); > + } > + > + jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); > + if (IS_ERR(jdi->enable_gpio)) { > + dev_err(dev, "cannot get enable-gpio %ld\n", > + PTR_ERR(jdi->enable_gpio)); > + jdi->enable_gpio = NULL; > + } else { > + gpiod_direction_output(jdi->enable_gpio, 0); > + } > + > + jdi->pwm_gpio = devm_gpiod_get(dev, "pwm", GPIOD_OUT_LOW); > + if (IS_ERR(jdi->pwm_gpio)) { > + dev_err(dev, "cannot get pwm-gpio %ld\n", > + PTR_ERR(jdi->pwm_gpio)); > + jdi->pwm_gpio = NULL; > + } else { > + gpiod_direction_output(jdi->pwm_gpio, 0); > + } As I said earlier, most of these aren't specified in the binding, fix either the binding or the code. > + /* we don't have backlight right now, proceed further */ > +#ifdef BACKLIGHT > + np = of_parse_phandle(dev->of_node, "backlight", 0); > + if (np) { > + jdi->backlight = of_find_backlight_by_node(np); > + of_node_put(np); > + > + if (!jdi->backlight) > + return -EPROBE_DEFER; > + } > +#endif Again, if you don't support it, don't submit it. We don't want dead code in the kernel. > +MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>"); > +MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>"); > +MODULE_DESCRIPTION("JDI WUXGA LT070ME05000 DSI video/command mode panel driver"); Technically this doesn't support command mode yet, so you might want to remove that from the description to avoid confusion. Thierry
Thierry Reding, Thanks for the review. Will address your reviews and resend the patches. On Wed, Apr 13, 2016 at 7:19 PM, Thierry Reding <thierry.reding@gmail.com> wrote: > On Wed, Apr 13, 2016 at 11:58:04AM +0530, Vinay Simha BN wrote: >> Add support for the JDI lt070me05000 WUXGA DSI panel used in >> Nexus 7 2013 devices. >> >> Programming sequence for the panel is was originally found in the >> android-msm-flo-3.4-lollipop-release branch from: >> https://android.googlesource.com/kernel/msm.git >> >> And video mode setting is from dsi-panel-jdi-dualmipi1-video.dtsi >> file in: >> git://codeaurora.org/kernel/msm-3.10.git LNX.LA.3.6_rb1.27 >> >> Other fixes folded in were provided >> by Archit Taneja <archit.taneja@gmail.com> >> >> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> >> [sumit.semwal: Ported to the drm/panel framework] >> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> >> [jstultz: Cherry-picked to mainline, folded down other fixes >> from Vinay and Archit] >> Signed-off-by: John Stultz <john.stultz@linaro.org> >> --- >> .../bindings/display/panel/jdi,lt070me05000.txt | 27 + >> .../devicetree/bindings/vendor-prefixes.txt | 1 + >> drivers/gpu/drm/panel/Kconfig | 11 + >> drivers/gpu/drm/panel/Makefile | 1 + >> drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 685 +++++++++++++++++++++ >> 5 files changed, 725 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> create mode 100644 drivers/gpu/drm/panel/panel-jdi-lt070me05000.c > > What's the difference between this and the patch you sent earlier? I'm > going to assume that the newer one is the correct patch, so I'll ignore > the previous patch. > >> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> new file mode 100644 >> index 0000000..35c5ac7 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > > The binding documentation should be a separate patch. > >> @@ -0,0 +1,27 @@ >> +JDI model LT070ME05000 1920x1200 7" DSI Panel >> + >> +Basic data sheet is at: >> + http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet >> + >> +This panel has video mode implemented currently in the driver. > > That's information irrelevant to the DT binding, since you're presumably > talking about the Linux drm/panel driver, whereas the DT binding is > supposed to specify the description of the panel hardware in OS-agnostic > terms. > >> +Required properties: >> +- compatible: should be "jdi,lt070me05000" >> + >> +Optional properties: >> +- power-supply: phandle of the regulator that provides the supply voltage >> +- reset-gpio: phandle of gpio for reset line >> +- backlight: phandle of the backlight device attached to the panel >> + >> +Example: >> + >> + dsi@54300000 { >> + panel: panel@0 { >> + compatible = "jdi,lt070me05000"; >> + reg = <0>; >> + >> + power-supply = <...>; >> + reset-gpio = <...>; >> + backlight = <...>; >> + }; >> + }; >> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt >> index a580f3e..ec42bb4 100644 >> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt >> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt >> @@ -130,6 +130,7 @@ invensense InvenSense Inc. >> isee ISEE 2007 S.L. >> isil Intersil >> issi Integrated Silicon Solutions Inc. >> +jdi Japan Display Inc. >> jedec JEDEC Solid State Technology Association >> karo Ka-Ro electronics GmbH >> keymile Keymile GmbH > > This should be a separate patch as well. > >> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig >> index 1500ab9..f41690e 100644 >> --- a/drivers/gpu/drm/panel/Kconfig >> +++ b/drivers/gpu/drm/panel/Kconfig >> @@ -61,6 +61,17 @@ config DRM_PANEL_SHARP_LQ101R1SX01 >> To compile this driver as a module, choose M here: the module >> will be called panel-sharp-lq101r1sx01. >> >> +config DRM_PANEL_JDI_LT070ME05000 >> + tristate "JDI LT070ME05000 WUXGA DSI panel" >> + depends on OF >> + depends on DRM_MIPI_DSI >> + depends on BACKLIGHT_CLASS_DEVICE >> + help >> + Say Y here if you want to enable support for JDI WUXGA DSI video/ >> + command mode panel as found in Google Nexus 7 (2013) devices. >> + The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses >> + 24 bit RGB per pixel. >> + >> config DRM_PANEL_SHARP_LS043T1LE01 >> tristate "Sharp LS043T1LE01 qHD video mode panel" >> depends on OF > > Please keep these sorted alphabetically. I do realize that the list > isn't sorted quite correctly at the moment, so you may as well leave > this as-is and I'll fix up the order when applying and after fixing > the current ordering. > >> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile >> index f277eed..e6c6fc8 100644 >> --- a/drivers/gpu/drm/panel/Makefile >> +++ b/drivers/gpu/drm/panel/Makefile >> @@ -5,3 +5,4 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o >> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o >> obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o >> +obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o > > Same here. > >> diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c >> new file mode 100644 >> index 0000000..051aa1b >> --- /dev/null >> +++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c >> @@ -0,0 +1,685 @@ >> +/* >> + * Copyright (C) 2015 InforceComputing >> + * Author: Vinay Simha BN <simhavcs@gmail.com> >> + * >> + * Copyright (C) 2015 Linaro Ltd >> + * Author: Sumit Semwal <sumit.semwal@linaro.org> > > Should either of those copyright lines include 2016? We're a pretty good > way into 2016, and I'd be surprised if this wasn't touched this year at > all. > >> +/* >> + * From internet archives, the panel for Nexus 7 2nd Gen, 2013 model is a >> + * JDI model LT070ME05000, and its data sheet is at: >> + * http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet >> + */ > > This comment is oddly placed here above the struct jdi_panel definition. > Perhaps move that information into the header comment? > >> +struct jdi_panel { >> + struct drm_panel base; >> + struct mipi_dsi_device *dsi; >> + >> + /* TODO: Add backilght support */ > > "backlight". Also if this is still TODO, why even have parts of the code > here? Just drop everything that's not used and move that to a follow-up > patch that implements full support. > >> + struct backlight_device *backlight; >> + struct regulator *supply; >> + struct gpio_desc *reset_gpio; >> + struct gpio_desc *enable_gpio; >> + struct gpio_desc *vcc_gpio; >> + >> + struct regulator *backlit; >> + struct regulator *lvs7; >> + struct regulator *avdd; >> + struct regulator *iovdd; >> + struct gpio_desc *pwm_gpio; > > Most of these resources aren't specified in the device tree binding, so > your driver doesn't properly implement the binding. You'll have to fix > the driver or the binding. > >> + >> + bool prepared; >> + bool enabled; >> + >> + const struct drm_display_mode *mode; >> +}; >> + >> +static inline struct jdi_panel *to_jdi_panel(struct drm_panel *panel) >> +{ >> + return container_of(panel, struct jdi_panel, base); >> +} >> + >> +static char MCAP[2] = {0xB0, 0x00}; >> +static char interface_setting_cmd[6] = {0xB3, 0x04, 0x08, 0x00, 0x22, 0x00}; >> +static char interface_setting[6] = {0xB3, 0x26, 0x08, 0x00, 0x20, 0x00}; > > Please make all of these (and the ones below) arrays of u8, since that's > the type used in the prototype of the function that receives these as > parameters. Also, please use consistent capitalization and a space after > { and before }. > >> +static char interface_ID_setting[2] = {0xB4, 0x0C}; >> +static char DSI_control[3] = {0xB6, 0x3A, 0xD3}; >> + >> +static char tear_scan_line[3] = {0x44, 0x03, 0x00}; > > This is a standard DCS command, please turn this into a generic helper > such as mipi_dsi_dcs_set_tear_scanline(). > >> +/* for fps control, set fps to 60.32Hz */ >> +static char LTPS_timing_setting[2] = {0xC6, 0x78}; >> +static char sequencer_timing_control[2] = {0xD6, 0x01}; >> + >> +/* set brightness */ >> +static char write_display_brightness[] = {0x51, 0xFF}; > > Same here. > >> +/* enable LEDPWM pin output, turn on LEDPWM output, turn off pwm dimming */ >> +static char write_control_display[] = {0x53, 0x24}; > > And here. > >> +/* >> + * choose cabc mode, 0x00(-0%), 0x01(-15%), 0x02(-40%), 0x03(-54%), >> + * disable SRE(sunlight readability enhancement) >> + */ >> +static char write_cabc[] = {0x55, 0x00}; > > And here. > >> +static int jdi_panel_init(struct jdi_panel *jdi) >> +{ >> + struct mipi_dsi_device *dsi = jdi->dsi; >> + int ret; >> + >> + dsi->mode_flags |= MIPI_DSI_MODE_LPM; >> + >> + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { >> + ret = mipi_dsi_dcs_soft_reset(dsi); >> + if (ret < 0) >> + return ret; >> + >> + mdelay(10); > > Please don't use mdelay() because it will busy-loop for a very long time > and waste precious CPU cycles. Instead, use usleep_range() for these > cases (or msleep() for durations longer than ~10 ms). Same goes for the > other occurrences below. > >> + >> + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x70); >> + if (ret < 0) >> + return ret; > > There are symbolic constants for the pixel formats, use them to convey > meaning. > >> + >> + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x04AF); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F); >> + if (ret < 0) >> + return ret; > > These should be parameterized on the panel width and height, to make it > clear where the values come from. > >> + >> + ret = mipi_dsi_dcs_set_tear_on(dsi, >> + MIPI_DSI_DCS_TEAR_MODE_VBLANK); >> + if (ret < 0) >> + return ret; >> + mdelay(5); >> + >> + ret = mipi_dsi_generic_write(dsi, tear_scan_line, >> + sizeof(tear_scan_line)); >> + if (ret < 0) >> + return ret; > > Like I mentioned earlier, this should be a generic helper to help make > its intention clearer. > >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, write_display_brightness, >> + sizeof(write_display_brightness) >> + ); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, write_control_display, >> + sizeof(write_control_display)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc, >> + sizeof(write_cabc)); >> + if (ret < 0) >> + return ret; > > Same for these. I don't currently have access to the DCS 1.3 > specification, but I suspect that some of the parameters for these > commands could be defined via symbolic names. > >> + >> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); >> + if (ret < 0) >> + return ret; >> + mdelay(120); >> + >> + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); >> + if (ret < 0) >> + return ret; >> + mdelay(10); >> + >> + ret = mipi_dsi_generic_write(dsi, interface_setting, >> + sizeof(interface_setting)); >> + if (ret < 0) >> + return ret; >> + mdelay(20); >> + >> + backlight_control4[18] = 0x04; >> + backlight_control4[19] = 0x00; >> + >> + ret = mipi_dsi_generic_write(dsi, backlight_control4, >> + sizeof(backlight_control4)); >> + if (ret < 0) >> + return ret; >> + mdelay(20); >> + >> + MCAP[1] = 0x03; >> + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); >> + if (ret < 0) >> + return ret; > > That's odd. Doesn't this break idempotence of this function? You modify > the global MCAP array by writing 0x03 to MCAP[1], so when this function > is called a second time, MCAP[1] will be 0x03 already in the first call > a few lines above, instead of the 0x00 that it was initially. > >> + } else { >> + /* >> + * TODO : need to verify panel settings when >> + * dsi cmd mode supported for apq8064 - simhavcs >> + */ >> + ret = mipi_dsi_dcs_soft_reset(dsi); >> + if (ret < 0) >> + return ret; > > This whole else clause is dead code because the condition for the if > clause is always true. Just drop it and add it back when you properly > support both modes. > >> +static int jdi_panel_on(struct jdi_panel *jdi) >> +{ >> + struct mipi_dsi_device *dsi = jdi->dsi; >> + int ret; >> + >> + dsi->mode_flags |= MIPI_DSI_MODE_LPM; >> + >> + ret = mipi_dsi_dcs_set_display_on(dsi); >> + if (ret < 0) >> + return ret; >> + >> + return 0; >> +} >> + >> +static int jdi_panel_off(struct jdi_panel *jdi) >> +{ >> + struct mipi_dsi_device *dsi = jdi->dsi; >> + int ret; >> + >> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > > Should this not be cleared at the end of the function so that the below > commands still get run in LP mode? > >> + >> + ret = mipi_dsi_dcs_set_display_off(dsi); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_tear_off(dsi); >> + if (ret < 0) >> + return ret; >> + >> + msleep(100); >> + >> + return 0; >> +} >> + >> +static int jdi_panel_disable(struct drm_panel *panel) >> +{ >> + struct jdi_panel *jdi = to_jdi_panel(panel); >> + >> + if (!jdi->enabled) >> + return 0; >> + >> + DRM_DEBUG("disable\n"); > > This doesn't look very useful debug information. I think you should > remove it. Same for other similar occurrences below. > >> +static const struct drm_panel_funcs jdi_panel_funcs = { >> + .disable = jdi_panel_disable, >> + .unprepare = jdi_panel_unprepare, >> + .prepare = jdi_panel_prepare, >> + .enable = jdi_panel_enable, >> + .get_modes = jdi_panel_get_modes, >> +}; >> + >> +static const struct of_device_id jdi_of_match[] = { >> + { .compatible = "jdi,lt070me05000", }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, jdi_of_match); > > A single tab is enough to indent the above. > >> +static int jdi_panel_add(struct jdi_panel *jdi) >> +{ >> + struct device *dev = &jdi->dsi->dev; >> + int ret; >> + >> + jdi->mode = &default_mode; > > What do you keep this around for? > >> + >> + /* lvs5 */ >> + jdi->supply = devm_regulator_get(dev, "power"); >> + if (IS_ERR(jdi->supply)) >> + return PTR_ERR(jdi->supply); >> + >> + /* l17 */ >> + jdi->backlit = devm_regulator_get(dev, "backlit"); >> + if (IS_ERR(jdi->supply)) >> + return PTR_ERR(jdi->supply); >> + >> + jdi->lvs7 = devm_regulator_get(dev, "lvs7"); >> + if (IS_ERR(jdi->lvs7)) >> + return PTR_ERR(jdi->lvs7); >> + >> + jdi->avdd = devm_regulator_get(dev, "avdd"); >> + if (IS_ERR(jdi->avdd)) >> + return PTR_ERR(jdi->avdd); >> + >> + jdi->iovdd = devm_regulator_get(dev, "iovdd"); >> + if (IS_ERR(jdi->iovdd)) >> + return PTR_ERR(jdi->iovdd); >> + >> + jdi->vcc_gpio = devm_gpiod_get(dev, "vcc", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->vcc_gpio)) { >> + dev_err(dev, "cannot get vcc-gpio %ld\n", >> + PTR_ERR(jdi->vcc_gpio)); >> + jdi->vcc_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->vcc_gpio, 0); >> + } >> + >> + jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->reset_gpio)) { >> + dev_err(dev, "cannot get reset-gpios %ld\n", >> + PTR_ERR(jdi->reset_gpio)); >> + jdi->reset_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->reset_gpio, 0); >> + } >> + >> + jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->enable_gpio)) { >> + dev_err(dev, "cannot get enable-gpio %ld\n", >> + PTR_ERR(jdi->enable_gpio)); >> + jdi->enable_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->enable_gpio, 0); >> + } >> + >> + jdi->pwm_gpio = devm_gpiod_get(dev, "pwm", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->pwm_gpio)) { >> + dev_err(dev, "cannot get pwm-gpio %ld\n", >> + PTR_ERR(jdi->pwm_gpio)); >> + jdi->pwm_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->pwm_gpio, 0); >> + } > > As I said earlier, most of these aren't specified in the binding, fix > either the binding or the code. > >> + /* we don't have backlight right now, proceed further */ >> +#ifdef BACKLIGHT >> + np = of_parse_phandle(dev->of_node, "backlight", 0); >> + if (np) { >> + jdi->backlight = of_find_backlight_by_node(np); >> + of_node_put(np); >> + >> + if (!jdi->backlight) >> + return -EPROBE_DEFER; >> + } >> +#endif > > Again, if you don't support it, don't submit it. We don't want dead code > in the kernel. > >> +MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>"); >> +MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>"); >> +MODULE_DESCRIPTION("JDI WUXGA LT070ME05000 DSI video/command mode panel driver"); > > Technically this doesn't support command mode yet, so you might want to > remove that from the description to avoid confusion. > > Thierry
On 4/13/2016 11:58 AM, Vinay Simha BN wrote: > Add support for the JDI lt070me05000 WUXGA DSI panel used in > Nexus 7 2013 devices. > > Programming sequence for the panel is was originally found in the > android-msm-flo-3.4-lollipop-release branch from: > https://android.googlesource.com/kernel/msm.git > > And video mode setting is from dsi-panel-jdi-dualmipi1-video.dtsi > file in: > git://codeaurora.org/kernel/msm-3.10.git LNX.LA.3.6_rb1.27 > > Other fixes folded in were provided > by Archit Taneja <archit.taneja@gmail.com> > > Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> > [sumit.semwal: Ported to the drm/panel framework] > Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> > [jstultz: Cherry-picked to mainline, folded down other fixes > from Vinay and Archit] > Signed-off-by: John Stultz <john.stultz@linaro.org> > --- > .../bindings/display/panel/jdi,lt070me05000.txt | 27 + > .../devicetree/bindings/vendor-prefixes.txt | 1 + > drivers/gpu/drm/panel/Kconfig | 11 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 685 +++++++++++++++++++++ > 5 files changed, 725 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > create mode 100644 drivers/gpu/drm/panel/panel-jdi-lt070me05000.c > > diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > new file mode 100644 > index 0000000..35c5ac7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > @@ -0,0 +1,27 @@ > +JDI model LT070ME05000 1920x1200 7" DSI Panel > + > +Basic data sheet is at: > + http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet > + > +This panel has video mode implemented currently in the driver. > + > +Required properties: > +- compatible: should be "jdi,lt070me05000" > + > +Optional properties: > +- power-supply: phandle of the regulator that provides the supply voltage > +- reset-gpio: phandle of gpio for reset line > +- backlight: phandle of the backlight device attached to the panel > + > +Example: > + > + dsi@54300000 { > + panel: panel@0 { > + compatible = "jdi,lt070me05000"; > + reg = <0>; > + > + power-supply = <...>; > + reset-gpio = <...>; > + backlight = <...>; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index a580f3e..ec42bb4 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -130,6 +130,7 @@ invensense InvenSense Inc. > isee ISEE 2007 S.L. > isil Intersil > issi Integrated Silicon Solutions Inc. > +jdi Japan Display Inc. > jedec JEDEC Solid State Technology Association > karo Ka-Ro electronics GmbH > keymile Keymile GmbH > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig > index 1500ab9..f41690e 100644 > --- a/drivers/gpu/drm/panel/Kconfig > +++ b/drivers/gpu/drm/panel/Kconfig > @@ -61,6 +61,17 @@ config DRM_PANEL_SHARP_LQ101R1SX01 > To compile this driver as a module, choose M here: the module > will be called panel-sharp-lq101r1sx01. > > +config DRM_PANEL_JDI_LT070ME05000 > + tristate "JDI LT070ME05000 WUXGA DSI panel" > + depends on OF > + depends on DRM_MIPI_DSI > + depends on BACKLIGHT_CLASS_DEVICE > + help > + Say Y here if you want to enable support for JDI WUXGA DSI video/ > + command mode panel as found in Google Nexus 7 (2013) devices. > + The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses > + 24 bit RGB per pixel. > + > config DRM_PANEL_SHARP_LS043T1LE01 > tristate "Sharp LS043T1LE01 qHD video mode panel" > depends on OF > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile > index f277eed..e6c6fc8 100644 > --- a/drivers/gpu/drm/panel/Makefile > +++ b/drivers/gpu/drm/panel/Makefile > @@ -5,3 +5,4 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o > obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o > obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o > obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o > +obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o > diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c > new file mode 100644 > index 0000000..051aa1b > --- /dev/null > +++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c > @@ -0,0 +1,685 @@ > +/* > + * Copyright (C) 2015 InforceComputing > + * Author: Vinay Simha BN <simhavcs@gmail.com> > + * > + * Copyright (C) 2015 Linaro Ltd > + * Author: Sumit Semwal <sumit.semwal@linaro.org> > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License version 2 as published by > + * the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for > + * more details. > + * > + * You should have received a copy of the GNU General Public License along with > + * this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/backlight.h> > +#include <linux/gpio/consumer.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/regulator/consumer.h> > + > +#include <drm/drmP.h> > +#include <drm/drm_crtc.h> > +#include <drm/drm_mipi_dsi.h> > +#include <drm/drm_panel.h> > + > +#include <video/mipi_display.h> > + > +/* > + * From internet archives, the panel for Nexus 7 2nd Gen, 2013 model is a > + * JDI model LT070ME05000, and its data sheet is at: > + * http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet > + */ > +struct jdi_panel { > + struct drm_panel base; > + struct mipi_dsi_device *dsi; > + > + /* TODO: Add backilght support */ > + struct backlight_device *backlight; > + struct regulator *supply; > + struct gpio_desc *reset_gpio; > + struct gpio_desc *enable_gpio; > + struct gpio_desc *vcc_gpio; > + > + struct regulator *backlit; > + struct regulator *lvs7; > + struct regulator *avdd; > + struct regulator *iovdd; > + struct gpio_desc *pwm_gpio; > + > + bool prepared; > + bool enabled; > + > + const struct drm_display_mode *mode; > +}; > + > +static inline struct jdi_panel *to_jdi_panel(struct drm_panel *panel) > +{ > + return container_of(panel, struct jdi_panel, base); > +} > + > +static char MCAP[2] = {0xB0, 0x00}; > +static char interface_setting_cmd[6] = {0xB3, 0x04, 0x08, 0x00, 0x22, 0x00}; > +static char interface_setting[6] = {0xB3, 0x26, 0x08, 0x00, 0x20, 0x00}; > + > +static char interface_ID_setting[2] = {0xB4, 0x0C}; > +static char DSI_control[3] = {0xB6, 0x3A, 0xD3}; > + > +static char tear_scan_line[3] = {0x44, 0x03, 0x00}; > + > +/* for fps control, set fps to 60.32Hz */ > +static char LTPS_timing_setting[2] = {0xC6, 0x78}; > +static char sequencer_timing_control[2] = {0xD6, 0x01}; > + > +/* set brightness */ > +static char write_display_brightness[] = {0x51, 0xFF}; > +/* enable LEDPWM pin output, turn on LEDPWM output, turn off pwm dimming */ > +static char write_control_display[] = {0x53, 0x24}; > +/* > + * choose cabc mode, 0x00(-0%), 0x01(-15%), 0x02(-40%), 0x03(-54%), > + * disable SRE(sunlight readability enhancement) > + */ > +static char write_cabc[] = {0x55, 0x00}; > +/* for cabc mode 0x1(-15%) */ > +static char backlight_control1[] = {0xB8, 0x07, 0x87, 0x26, 0x18, 0x00, 0x32}; > +/* for cabc mode 0x2(-40%) */ > +static char backlight_control2[] = {0xB9, 0x07, 0x75, 0x61, 0x20, 0x16, 0x87}; > +/* for cabc mode 0x3(-54%) */ > +static char backlight_control3[] = {0xBA, 0x07, 0x70, 0x81, 0x20, 0x45, 0xB4}; > +/* for pwm frequency and dimming control */ > +static char backlight_control4[] = {0xCE, 0x7D, 0x40, 0x48, 0x56, 0x67, 0x78, > + 0x88, 0x98, 0xA7, 0xB5, 0xC3, 0xD1, 0xDE, 0xE9, 0xF2, 0xFA, > + 0xFF, 0x37, 0xF5, 0x0F, 0x0F, 0x42, 0x00}; Apart from the u8 conversion as mentioned by Thierry, you should convert these to const too. > + > +static int jdi_panel_init(struct jdi_panel *jdi) > +{ > + struct mipi_dsi_device *dsi = jdi->dsi; > + int ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { > + ret = mipi_dsi_dcs_soft_reset(dsi); > + if (ret < 0) > + return ret; > + > + mdelay(10); > + > + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x70); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x04AF); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_tear_on(dsi, > + MIPI_DSI_DCS_TEAR_MODE_VBLANK); > + if (ret < 0) > + return ret; > + mdelay(5); > + > + ret = mipi_dsi_generic_write(dsi, tear_scan_line, > + sizeof(tear_scan_line)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_write_buffer(dsi, write_display_brightness, > + sizeof(write_display_brightness) > + ); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_write_buffer(dsi, write_control_display, > + sizeof(write_control_display)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc, > + sizeof(write_cabc)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); > + if (ret < 0) > + return ret; > + mdelay(120); > + > + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); > + if (ret < 0) > + return ret; > + mdelay(10); > + > + ret = mipi_dsi_generic_write(dsi, interface_setting, > + sizeof(interface_setting)); > + if (ret < 0) > + return ret; > + mdelay(20); > + > + backlight_control4[18] = 0x04; > + backlight_control4[19] = 0x00; Any reason why these are overwritten? It would be better to have these values in the array itself. > + > + ret = mipi_dsi_generic_write(dsi, backlight_control4, > + sizeof(backlight_control4)); > + if (ret < 0) > + return ret; > + mdelay(20); > + > + MCAP[1] = 0x03; > + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); > + if (ret < 0) > + return ret; > + } else { > + /* > + * TODO : need to verify panel settings when > + * dsi cmd mode supported for apq8064 - simhavcs > + */ > + ret = mipi_dsi_dcs_soft_reset(dsi); > + if (ret < 0) > + return ret; > + > + mdelay(5); > + > + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_generic_write(dsi, interface_setting_cmd, > + sizeof(interface_setting_cmd)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_generic_write(dsi, interface_ID_setting, > + sizeof(interface_ID_setting)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_generic_write(dsi, DSI_control, > + sizeof(DSI_control)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_generic_write(dsi, LTPS_timing_setting, > + sizeof(LTPS_timing_setting)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_generic_write(dsi, sequencer_timing_control, > + sizeof(sequencer_timing_control)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_write_buffer(dsi, write_display_brightness, > + sizeof(write_display_brightness) > + ); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_write_buffer(dsi, write_control_display, > + sizeof(write_control_display)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc, > + sizeof(write_cabc)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_generic_write(dsi, backlight_control1, > + sizeof(backlight_control1)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_generic_write(dsi, backlight_control2, > + sizeof(backlight_control2)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_generic_write(dsi, backlight_control3, > + sizeof(backlight_control3)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_generic_write(dsi, backlight_control4, > + sizeof(backlight_control4)); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x04AF); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F); > + if (ret < 0) > + return ret; > + mdelay(120); > + > + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); > + if (ret < 0) > + return ret; > + } > + > + return 0; > +} > + > +static int jdi_panel_on(struct jdi_panel *jdi) > +{ > + struct mipi_dsi_device *dsi = jdi->dsi; > + int ret; > + > + dsi->mode_flags |= MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_set_display_on(dsi); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +static int jdi_panel_off(struct jdi_panel *jdi) > +{ > + struct mipi_dsi_device *dsi = jdi->dsi; > + int ret; > + > + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > + > + ret = mipi_dsi_dcs_set_display_off(dsi); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); > + if (ret < 0) > + return ret; > + > + ret = mipi_dsi_dcs_set_tear_off(dsi); > + if (ret < 0) > + return ret; > + > + msleep(100); > + > + return 0; > +} > + > +static int jdi_panel_disable(struct drm_panel *panel) > +{ > + struct jdi_panel *jdi = to_jdi_panel(panel); > + > + if (!jdi->enabled) > + return 0; > + > + DRM_DEBUG("disable\n"); > + > + if (jdi->backlight) { > + jdi->backlight->props.power = FB_BLANK_POWERDOWN; > + backlight_update_status(jdi->backlight); > + } > + > + jdi->enabled = false; > + > + return 0; > +} > + > +static int jdi_panel_unprepare(struct drm_panel *panel) > +{ > + struct jdi_panel *jdi = to_jdi_panel(panel); > + int ret; > + > + if (!jdi->prepared) > + return 0; > + > + DRM_DEBUG("unprepare\n"); > + > + ret = jdi_panel_off(jdi); > + if (ret) { > + dev_err(panel->dev, "failed to set panel off: %d\n", ret); > + return ret; > + } > + > + regulator_disable(jdi->supply); > + > + if (jdi->vcc_gpio) > + gpiod_set_value(jdi->vcc_gpio, 0); > + > + if (jdi->reset_gpio) > + gpiod_set_value(jdi->reset_gpio, 0); > + > + if (jdi->enable_gpio) > + gpiod_set_value(jdi->enable_gpio, 0); > + > + jdi->prepared = false; > + > + return 0; > +} > + > +static int jdi_panel_prepare(struct drm_panel *panel) > +{ > + struct jdi_panel *jdi = to_jdi_panel(panel); > + int ret; > + > + if (jdi->prepared) > + return 0; > + > + DRM_DEBUG("prepare\n"); > + > + ret = regulator_enable(jdi->iovdd); > + if (ret < 0) > + return ret; > + > + ret = regulator_enable(jdi->avdd); > + if (ret < 0) > + return ret; > + > + ret = regulator_enable(jdi->backlit); > + if (ret < 0) > + return ret; > + > + ret = regulator_enable(jdi->lvs7); > + if (ret < 0) > + return ret; > + > + ret = regulator_enable(jdi->supply); > + if (ret < 0) > + return ret; > + > + msleep(20); > + > + if (jdi->vcc_gpio) { > + gpiod_set_value(jdi->vcc_gpio, 1); > + usleep_range(10, 20); > + } > + > + if (jdi->reset_gpio) { > + gpiod_set_value(jdi->reset_gpio, 1); > + usleep_range(10, 20); > + } > + > + if (jdi->pwm_gpio) { > + gpiod_set_value(jdi->pwm_gpio, 1); > + usleep_range(10, 20); > + } > + > + if (jdi->enable_gpio) { > + gpiod_set_value(jdi->enable_gpio, 1); > + usleep_range(10, 20); > + } > + > + ret = jdi_panel_init(jdi); > + if (ret) { > + dev_err(panel->dev, "failed to init panel: %d\n", ret); > + goto poweroff; > + } > + > + ret = jdi_panel_on(jdi); > + if (ret) { > + dev_err(panel->dev, "failed to set panel on: %d\n", ret); > + goto poweroff; > + } > + > + jdi->prepared = true; > + > + return 0; > + > +poweroff: > + regulator_disable(jdi->supply); > + if (jdi->reset_gpio) > + gpiod_set_value(jdi->reset_gpio, 0); > + if (jdi->enable_gpio) > + gpiod_set_value(jdi->enable_gpio, 0); > + if (jdi->vcc_gpio) > + gpiod_set_value(jdi->vcc_gpio, 0); > + > + return ret; > +} > + > +static int jdi_panel_enable(struct drm_panel *panel) > +{ > + struct jdi_panel *jdi = to_jdi_panel(panel); > + > + if (jdi->enabled) > + return 0; > + > + DRM_DEBUG("enable\n"); > + > + if (jdi->backlight) { > + jdi->backlight->props.power = FB_BLANK_UNBLANK; > + backlight_update_status(jdi->backlight); > + } > + > + jdi->enabled = true; > + > + return 0; > +} The prepare/enable split seems a bit strange. Don't we want to put mipi_dsi_dcs_set_display_on in the enable() op too? > + > +static const struct drm_display_mode default_mode = { > + .clock = 155000, htotal * vtotal * vrefresh (1934 * 1340 * 60.32(as in comment)) comes at around 156.3 Mhz. Could you plug in the correct frequency? > + .hdisplay = 1200, > + .hsync_start = 1200 + 48, > + .hsync_end = 1200 + 48 + 32, > + .htotal = 1200 + 48 + 32 + 60, > + .vdisplay = 1920, > + .vsync_start = 1920 + 3, > + .vsync_end = 1920 + 3 + 5, > + .vtotal = 1920 + 3 + 5 + 6, > + .vrefresh = 60, > + .flags = 0, > +}; > + > +static int jdi_panel_get_modes(struct drm_panel *panel) > +{ > + struct drm_display_mode *mode; > + > + mode = drm_mode_duplicate(panel->drm, &default_mode); > + if (!mode) { > + dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n", > + default_mode.hdisplay, default_mode.vdisplay, > + default_mode.vrefresh); We should use the dsi->dev device pointer here like used elsewhere, not the drm device pointer. > + return -ENOMEM; > + } > + > + drm_mode_set_name(mode); > + > + drm_mode_probed_add(panel->connector, mode); > + > + return 1; > +} > + > +static const struct drm_panel_funcs jdi_panel_funcs = { > + .disable = jdi_panel_disable, > + .unprepare = jdi_panel_unprepare, > + .prepare = jdi_panel_prepare, > + .enable = jdi_panel_enable, > + .get_modes = jdi_panel_get_modes, > +}; > + > +static const struct of_device_id jdi_of_match[] = { > + { .compatible = "jdi,lt070me05000", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, jdi_of_match); > + > +static int jdi_panel_add(struct jdi_panel *jdi) > +{ > + struct device *dev = &jdi->dsi->dev; > + int ret; > + > + jdi->mode = &default_mode; > + > + /* lvs5 */ > + jdi->supply = devm_regulator_get(dev, "power"); > + if (IS_ERR(jdi->supply)) > + return PTR_ERR(jdi->supply); You could consider using regulator_get_bulk() api here, it would clean up the code a bit. > + > + /* l17 */ > + jdi->backlit = devm_regulator_get(dev, "backlit"); > + if (IS_ERR(jdi->supply)) > + return PTR_ERR(jdi->supply); > + > + jdi->lvs7 = devm_regulator_get(dev, "lvs7"); > + if (IS_ERR(jdi->lvs7)) > + return PTR_ERR(jdi->lvs7); > + > + jdi->avdd = devm_regulator_get(dev, "avdd"); > + if (IS_ERR(jdi->avdd)) > + return PTR_ERR(jdi->avdd); > + > + jdi->iovdd = devm_regulator_get(dev, "iovdd"); > + if (IS_ERR(jdi->iovdd)) > + return PTR_ERR(jdi->iovdd); > + > + jdi->vcc_gpio = devm_gpiod_get(dev, "vcc", GPIOD_OUT_LOW); > + if (IS_ERR(jdi->vcc_gpio)) { > + dev_err(dev, "cannot get vcc-gpio %ld\n", > + PTR_ERR(jdi->vcc_gpio)); > + jdi->vcc_gpio = NULL; > + } else { > + gpiod_direction_output(jdi->vcc_gpio, 0); > + } > + > + jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); > + if (IS_ERR(jdi->reset_gpio)) { > + dev_err(dev, "cannot get reset-gpios %ld\n", > + PTR_ERR(jdi->reset_gpio)); > + jdi->reset_gpio = NULL; > + } else { > + gpiod_direction_output(jdi->reset_gpio, 0); > + } > + > + jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); > + if (IS_ERR(jdi->enable_gpio)) { > + dev_err(dev, "cannot get enable-gpio %ld\n", > + PTR_ERR(jdi->enable_gpio)); > + jdi->enable_gpio = NULL; > + } else { > + gpiod_direction_output(jdi->enable_gpio, 0); > + } > + > + jdi->pwm_gpio = devm_gpiod_get(dev, "pwm", GPIOD_OUT_LOW); > + if (IS_ERR(jdi->pwm_gpio)) { > + dev_err(dev, "cannot get pwm-gpio %ld\n", > + PTR_ERR(jdi->pwm_gpio)); > + jdi->pwm_gpio = NULL; > + } else { > + gpiod_direction_output(jdi->pwm_gpio, 0); > + } > + > + /* we don't have backlight right now, proceed further */ > +#ifdef BACKLIGHT > + np = of_parse_phandle(dev->of_node, "backlight", 0); > + if (np) { > + jdi->backlight = of_find_backlight_by_node(np); > + of_node_put(np); > + > + if (!jdi->backlight) > + return -EPROBE_DEFER; > + } > +#endif > + > + drm_panel_init(&jdi->base); > + jdi->base.funcs = &jdi_panel_funcs; > + jdi->base.dev = &jdi->dsi->dev; > + > + ret = drm_panel_add(&jdi->base); > + if (ret < 0) > + goto put_backlight; > + > + return 0; > + > +put_backlight: > + if (jdi->backlight) > + put_device(&jdi->backlight->dev); > + > + return ret; > +} > + > +static void jdi_panel_del(struct jdi_panel *jdi) > +{ > + if (jdi->base.dev) > + drm_panel_remove(&jdi->base); > + > + if (jdi->backlight) > + put_device(&jdi->backlight->dev); > +} > + > +static int jdi_panel_probe(struct mipi_dsi_device *dsi) > +{ > + struct jdi_panel *jdi; > + int ret; > + > + dsi->lanes = 4; > + dsi->format = MIPI_DSI_FMT_RGB888; > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO | > + MIPI_DSI_MODE_VIDEO_HFP | MIPI_DSI_MODE_VIDEO_HBP | > + MIPI_DSI_MODE_VIDEO_HSA | > + MIPI_DSI_CLOCK_NON_CONTINUOUS; > + > + jdi = devm_kzalloc(&dsi->dev, sizeof(*jdi), GFP_KERNEL); > + if (!jdi) > + return -ENOMEM; > + > + mipi_dsi_set_drvdata(dsi, jdi); > + > + jdi->dsi = dsi; > + > + ret = jdi_panel_add(jdi); > + if (ret < 0) > + return ret; > + > + return mipi_dsi_attach(dsi); > +} > + > +static int jdi_panel_remove(struct mipi_dsi_device *dsi) > +{ > + struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi); > + int ret; > + > + ret = jdi_panel_disable(&jdi->base); > + if (ret < 0) > + dev_err(&dsi->dev, "failed to disable panel: %d\n", ret); Ideally, the driver's remove op shouldn't try to disable the panel. It should be done by the dsi host's connector itself. We can drop this unless there is a specfic reason to do so. Thanks for working on this. Archit
On Wed, Apr 13, 2016 at 7:19 PM, Thierry Reding <thierry.reding@gmail.com> wrote: > On Wed, Apr 13, 2016 at 11:58:04AM +0530, Vinay Simha BN wrote: >> Add support for the JDI lt070me05000 WUXGA DSI panel used in >> Nexus 7 2013 devices. >> >> Programming sequence for the panel is was originally found in the >> android-msm-flo-3.4-lollipop-release branch from: >> https://android.googlesource.com/kernel/msm.git >> >> And video mode setting is from dsi-panel-jdi-dualmipi1-video.dtsi >> file in: >> git://codeaurora.org/kernel/msm-3.10.git LNX.LA.3.6_rb1.27 >> >> Other fixes folded in were provided >> by Archit Taneja <archit.taneja@gmail.com> >> >> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> >> [sumit.semwal: Ported to the drm/panel framework] >> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> >> [jstultz: Cherry-picked to mainline, folded down other fixes >> from Vinay and Archit] >> Signed-off-by: John Stultz <john.stultz@linaro.org> >> --- >> .../bindings/display/panel/jdi,lt070me05000.txt | 27 + >> .../devicetree/bindings/vendor-prefixes.txt | 1 + >> drivers/gpu/drm/panel/Kconfig | 11 + >> drivers/gpu/drm/panel/Makefile | 1 + >> drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 685 +++++++++++++++++++++ >> 5 files changed, 725 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> create mode 100644 drivers/gpu/drm/panel/panel-jdi-lt070me05000.c > > What's the difference between this and the patch you sent earlier? I'm > going to assume that the newer one is the correct patch, so I'll ignore > the previous patch. > >> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> new file mode 100644 >> index 0000000..35c5ac7 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > > The binding documentation should be a separate patch. > >> @@ -0,0 +1,27 @@ >> +JDI model LT070ME05000 1920x1200 7" DSI Panel >> + >> +Basic data sheet is at: >> + http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet >> + >> +This panel has video mode implemented currently in the driver. > > That's information irrelevant to the DT binding, since you're presumably > talking about the Linux drm/panel driver, whereas the DT binding is > supposed to specify the description of the panel hardware in OS-agnostic > terms. > >> +Required properties: >> +- compatible: should be "jdi,lt070me05000" >> + >> +Optional properties: >> +- power-supply: phandle of the regulator that provides the supply voltage >> +- reset-gpio: phandle of gpio for reset line >> +- backlight: phandle of the backlight device attached to the panel >> + >> +Example: >> + >> + dsi@54300000 { >> + panel: panel@0 { >> + compatible = "jdi,lt070me05000"; >> + reg = <0>; >> + >> + power-supply = <...>; >> + reset-gpio = <...>; >> + backlight = <...>; >> + }; >> + }; >> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt >> index a580f3e..ec42bb4 100644 >> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt >> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt >> @@ -130,6 +130,7 @@ invensense InvenSense Inc. >> isee ISEE 2007 S.L. >> isil Intersil >> issi Integrated Silicon Solutions Inc. >> +jdi Japan Display Inc. >> jedec JEDEC Solid State Technology Association >> karo Ka-Ro electronics GmbH >> keymile Keymile GmbH > > This should be a separate patch as well. > >> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig >> index 1500ab9..f41690e 100644 >> --- a/drivers/gpu/drm/panel/Kconfig >> +++ b/drivers/gpu/drm/panel/Kconfig >> @@ -61,6 +61,17 @@ config DRM_PANEL_SHARP_LQ101R1SX01 >> To compile this driver as a module, choose M here: the module >> will be called panel-sharp-lq101r1sx01. >> >> +config DRM_PANEL_JDI_LT070ME05000 >> + tristate "JDI LT070ME05000 WUXGA DSI panel" >> + depends on OF >> + depends on DRM_MIPI_DSI >> + depends on BACKLIGHT_CLASS_DEVICE >> + help >> + Say Y here if you want to enable support for JDI WUXGA DSI video/ >> + command mode panel as found in Google Nexus 7 (2013) devices. >> + The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses >> + 24 bit RGB per pixel. >> + >> config DRM_PANEL_SHARP_LS043T1LE01 >> tristate "Sharp LS043T1LE01 qHD video mode panel" >> depends on OF > > Please keep these sorted alphabetically. I do realize that the list > isn't sorted quite correctly at the moment, so you may as well leave > this as-is and I'll fix up the order when applying and after fixing > the current ordering. > >> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile >> index f277eed..e6c6fc8 100644 >> --- a/drivers/gpu/drm/panel/Makefile >> +++ b/drivers/gpu/drm/panel/Makefile >> @@ -5,3 +5,4 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o >> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o >> obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o >> +obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o > > Same here. > >> diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c >> new file mode 100644 >> index 0000000..051aa1b >> --- /dev/null >> +++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c >> @@ -0,0 +1,685 @@ >> +/* >> + * Copyright (C) 2015 InforceComputing >> + * Author: Vinay Simha BN <simhavcs@gmail.com> >> + * >> + * Copyright (C) 2015 Linaro Ltd >> + * Author: Sumit Semwal <sumit.semwal@linaro.org> > > Should either of those copyright lines include 2016? We're a pretty good > way into 2016, and I'd be surprised if this wasn't touched this year at > all. > >> +/* >> + * From internet archives, the panel for Nexus 7 2nd Gen, 2013 model is a >> + * JDI model LT070ME05000, and its data sheet is at: >> + * http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet >> + */ > > This comment is oddly placed here above the struct jdi_panel definition. > Perhaps move that information into the header comment? > >> +struct jdi_panel { >> + struct drm_panel base; >> + struct mipi_dsi_device *dsi; >> + >> + /* TODO: Add backilght support */ > > "backlight". Also if this is still TODO, why even have parts of the code > here? Just drop everything that's not used and move that to a follow-up > patch that implements full support. > >> + struct backlight_device *backlight; >> + struct regulator *supply; >> + struct gpio_desc *reset_gpio; >> + struct gpio_desc *enable_gpio; >> + struct gpio_desc *vcc_gpio; >> + >> + struct regulator *backlit; >> + struct regulator *lvs7; >> + struct regulator *avdd; >> + struct regulator *iovdd; >> + struct gpio_desc *pwm_gpio; > > Most of these resources aren't specified in the device tree binding, so > your driver doesn't properly implement the binding. You'll have to fix > the driver or the binding. > >> + >> + bool prepared; >> + bool enabled; >> + >> + const struct drm_display_mode *mode; >> +}; >> + >> +static inline struct jdi_panel *to_jdi_panel(struct drm_panel *panel) >> +{ >> + return container_of(panel, struct jdi_panel, base); >> +} >> + >> +static char MCAP[2] = {0xB0, 0x00}; >> +static char interface_setting_cmd[6] = {0xB3, 0x04, 0x08, 0x00, 0x22, 0x00}; >> +static char interface_setting[6] = {0xB3, 0x26, 0x08, 0x00, 0x20, 0x00}; > > Please make all of these (and the ones below) arrays of u8, since that's > the type used in the prototype of the function that receives these as > parameters. Also, please use consistent capitalization and a space after > { and before }. > >> +static char interface_ID_setting[2] = {0xB4, 0x0C}; >> +static char DSI_control[3] = {0xB6, 0x3A, 0xD3}; >> + >> +static char tear_scan_line[3] = {0x44, 0x03, 0x00}; > > This is a standard DCS command, please turn this into a generic helper > such as mipi_dsi_dcs_set_tear_scanline(). > >> +/* for fps control, set fps to 60.32Hz */ >> +static char LTPS_timing_setting[2] = {0xC6, 0x78}; >> +static char sequencer_timing_control[2] = {0xD6, 0x01}; >> + >> +/* set brightness */ >> +static char write_display_brightness[] = {0x51, 0xFF}; > > Same here. > >> +/* enable LEDPWM pin output, turn on LEDPWM output, turn off pwm dimming */ >> +static char write_control_display[] = {0x53, 0x24}; > > And here. > >> +/* >> + * choose cabc mode, 0x00(-0%), 0x01(-15%), 0x02(-40%), 0x03(-54%), >> + * disable SRE(sunlight readability enhancement) >> + */ >> +static char write_cabc[] = {0x55, 0x00}; > > And here. > >> +static int jdi_panel_init(struct jdi_panel *jdi) >> +{ >> + struct mipi_dsi_device *dsi = jdi->dsi; >> + int ret; >> + >> + dsi->mode_flags |= MIPI_DSI_MODE_LPM; >> + >> + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { >> + ret = mipi_dsi_dcs_soft_reset(dsi); >> + if (ret < 0) >> + return ret; >> + >> + mdelay(10); > > Please don't use mdelay() because it will busy-loop for a very long time > and waste precious CPU cycles. Instead, use usleep_range() for these > cases (or msleep() for durations longer than ~10 ms). Same goes for the > other occurrences below. > >> + >> + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x70); >> + if (ret < 0) >> + return ret; > > There are symbolic constants for the pixel formats, use them to convey > meaning. > >> + >> + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x04AF); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F); >> + if (ret < 0) >> + return ret; > > These should be parameterized on the panel width and height, to make it > clear where the values come from. > >> + >> + ret = mipi_dsi_dcs_set_tear_on(dsi, >> + MIPI_DSI_DCS_TEAR_MODE_VBLANK); >> + if (ret < 0) >> + return ret; >> + mdelay(5); >> + >> + ret = mipi_dsi_generic_write(dsi, tear_scan_line, >> + sizeof(tear_scan_line)); >> + if (ret < 0) >> + return ret; > > Like I mentioned earlier, this should be a generic helper to help make > its intention clearer. > >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, write_display_brightness, >> + sizeof(write_display_brightness) >> + ); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, write_control_display, >> + sizeof(write_control_display)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc, >> + sizeof(write_cabc)); >> + if (ret < 0) >> + return ret; > > Same for these. I don't currently have access to the DCS 1.3 > specification, but I suspect that some of the parameters for these > commands could be defined via symbolic names. > >> + >> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); >> + if (ret < 0) >> + return ret; >> + mdelay(120); >> + >> + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); >> + if (ret < 0) >> + return ret; >> + mdelay(10); >> + >> + ret = mipi_dsi_generic_write(dsi, interface_setting, >> + sizeof(interface_setting)); >> + if (ret < 0) >> + return ret; >> + mdelay(20); >> + >> + backlight_control4[18] = 0x04; >> + backlight_control4[19] = 0x00; >> + >> + ret = mipi_dsi_generic_write(dsi, backlight_control4, >> + sizeof(backlight_control4)); >> + if (ret < 0) >> + return ret; >> + mdelay(20); >> + >> + MCAP[1] = 0x03; >> + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); >> + if (ret < 0) >> + return ret; > > That's odd. Doesn't this break idempotence of this function? You modify > the global MCAP array by writing 0x03 to MCAP[1], so when this function > is called a second time, MCAP[1] will be 0x03 already in the first call > a few lines above, instead of the 0x00 that it was initially. > >> + } else { >> + /* >> + * TODO : need to verify panel settings when >> + * dsi cmd mode supported for apq8064 - simhavcs >> + */ >> + ret = mipi_dsi_dcs_soft_reset(dsi); >> + if (ret < 0) >> + return ret; > > This whole else clause is dead code because the condition for the if > clause is always true. Just drop it and add it back when you properly > support both modes. > >> +static int jdi_panel_on(struct jdi_panel *jdi) >> +{ >> + struct mipi_dsi_device *dsi = jdi->dsi; >> + int ret; >> + >> + dsi->mode_flags |= MIPI_DSI_MODE_LPM; >> + >> + ret = mipi_dsi_dcs_set_display_on(dsi); >> + if (ret < 0) >> + return ret; >> + >> + return 0; >> +} >> + >> +static int jdi_panel_off(struct jdi_panel *jdi) >> +{ >> + struct mipi_dsi_device *dsi = jdi->dsi; >> + int ret; >> + >> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; > > Should this not be cleared at the end of the function so that the below > commands still get run in LP mode? display off is done in HS mode as per the clock diagram of the generic dsi panel datasheet. > >> + >> + ret = mipi_dsi_dcs_set_display_off(dsi); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_tear_off(dsi); >> + if (ret < 0) >> + return ret; >> + >> + msleep(100); >> + >> + return 0; >> +} >> + >> +static int jdi_panel_disable(struct drm_panel *panel) >> +{ >> + struct jdi_panel *jdi = to_jdi_panel(panel); >> + >> + if (!jdi->enabled) >> + return 0; >> + >> + DRM_DEBUG("disable\n"); > > This doesn't look very useful debug information. I think you should > remove it. Same for other similar occurrences below. when we enable the drm.debug log in cmdline, we well get this information, It is good to have debug logs of the panel got disabled or not. If you suggest not required will remove in the v3 version > >> +static const struct drm_panel_funcs jdi_panel_funcs = { >> + .disable = jdi_panel_disable, >> + .unprepare = jdi_panel_unprepare, >> + .prepare = jdi_panel_prepare, >> + .enable = jdi_panel_enable, >> + .get_modes = jdi_panel_get_modes, >> +}; >> + >> +static const struct of_device_id jdi_of_match[] = { >> + { .compatible = "jdi,lt070me05000", }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, jdi_of_match); > > A single tab is enough to indent the above. > >> +static int jdi_panel_add(struct jdi_panel *jdi) >> +{ >> + struct device *dev = &jdi->dsi->dev; >> + int ret; >> + >> + jdi->mode = &default_mode; > > What do you keep this around for? This will have the default resolution of the dsi panel. > >> + >> + /* lvs5 */ >> + jdi->supply = devm_regulator_get(dev, "power"); >> + if (IS_ERR(jdi->supply)) >> + return PTR_ERR(jdi->supply); >> + >> + /* l17 */ >> + jdi->backlit = devm_regulator_get(dev, "backlit"); >> + if (IS_ERR(jdi->supply)) >> + return PTR_ERR(jdi->supply); >> + >> + jdi->lvs7 = devm_regulator_get(dev, "lvs7"); >> + if (IS_ERR(jdi->lvs7)) >> + return PTR_ERR(jdi->lvs7); >> + >> + jdi->avdd = devm_regulator_get(dev, "avdd"); >> + if (IS_ERR(jdi->avdd)) >> + return PTR_ERR(jdi->avdd); >> + >> + jdi->iovdd = devm_regulator_get(dev, "iovdd"); >> + if (IS_ERR(jdi->iovdd)) >> + return PTR_ERR(jdi->iovdd); >> + >> + jdi->vcc_gpio = devm_gpiod_get(dev, "vcc", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->vcc_gpio)) { >> + dev_err(dev, "cannot get vcc-gpio %ld\n", >> + PTR_ERR(jdi->vcc_gpio)); >> + jdi->vcc_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->vcc_gpio, 0); >> + } >> + >> + jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->reset_gpio)) { >> + dev_err(dev, "cannot get reset-gpios %ld\n", >> + PTR_ERR(jdi->reset_gpio)); >> + jdi->reset_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->reset_gpio, 0); >> + } >> + >> + jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->enable_gpio)) { >> + dev_err(dev, "cannot get enable-gpio %ld\n", >> + PTR_ERR(jdi->enable_gpio)); >> + jdi->enable_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->enable_gpio, 0); >> + } >> + >> + jdi->pwm_gpio = devm_gpiod_get(dev, "pwm", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->pwm_gpio)) { >> + dev_err(dev, "cannot get pwm-gpio %ld\n", >> + PTR_ERR(jdi->pwm_gpio)); >> + jdi->pwm_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->pwm_gpio, 0); >> + } > > As I said earlier, most of these aren't specified in the binding, fix > either the binding or the code. > >> + /* we don't have backlight right now, proceed further */ >> +#ifdef BACKLIGHT >> + np = of_parse_phandle(dev->of_node, "backlight", 0); >> + if (np) { >> + jdi->backlight = of_find_backlight_by_node(np); >> + of_node_put(np); >> + >> + if (!jdi->backlight) >> + return -EPROBE_DEFER; >> + } >> +#endif > > Again, if you don't support it, don't submit it. We don't want dead code > in the kernel. > >> +MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>"); >> +MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>"); >> +MODULE_DESCRIPTION("JDI WUXGA LT070ME05000 DSI video/command mode panel driver"); > > Technically this doesn't support command mode yet, so you might want to > remove that from the description to avoid confusion. > > Thierry all other inputs are fixed in the v2 version
On Thu, Apr 14, 2016 at 8:10 PM, Archit Taneja <architt@codeaurora.org> wrote: > > > On 4/13/2016 11:58 AM, Vinay Simha BN wrote: >> >> Add support for the JDI lt070me05000 WUXGA DSI panel used in >> Nexus 7 2013 devices. >> >> Programming sequence for the panel is was originally found in the >> android-msm-flo-3.4-lollipop-release branch from: >> https://android.googlesource.com/kernel/msm.git >> >> And video mode setting is from dsi-panel-jdi-dualmipi1-video.dtsi >> file in: >> git://codeaurora.org/kernel/msm-3.10.git LNX.LA.3.6_rb1.27 >> >> Other fixes folded in were provided >> by Archit Taneja <archit.taneja@gmail.com> >> >> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> >> [sumit.semwal: Ported to the drm/panel framework] >> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> >> [jstultz: Cherry-picked to mainline, folded down other fixes >> from Vinay and Archit] >> Signed-off-by: John Stultz <john.stultz@linaro.org> >> --- >> .../bindings/display/panel/jdi,lt070me05000.txt | 27 + >> .../devicetree/bindings/vendor-prefixes.txt | 1 + >> drivers/gpu/drm/panel/Kconfig | 11 + >> drivers/gpu/drm/panel/Makefile | 1 + >> drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 685 >> +++++++++++++++++++++ >> 5 files changed, 725 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> create mode 100644 drivers/gpu/drm/panel/panel-jdi-lt070me05000.c >> >> diff --git >> a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> new file mode 100644 >> index 0000000..35c5ac7 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt >> @@ -0,0 +1,27 @@ >> +JDI model LT070ME05000 1920x1200 7" DSI Panel >> + >> +Basic data sheet is at: >> + >> http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet >> + >> +This panel has video mode implemented currently in the driver. >> + >> +Required properties: >> +- compatible: should be "jdi,lt070me05000" >> + >> +Optional properties: >> +- power-supply: phandle of the regulator that provides the supply voltage >> +- reset-gpio: phandle of gpio for reset line >> +- backlight: phandle of the backlight device attached to the panel >> + >> +Example: >> + >> + dsi@54300000 { >> + panel: panel@0 { >> + compatible = "jdi,lt070me05000"; >> + reg = <0>; >> + >> + power-supply = <...>; >> + reset-gpio = <...>; >> + backlight = <...>; >> + }; >> + }; >> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt >> b/Documentation/devicetree/bindings/vendor-prefixes.txt >> index a580f3e..ec42bb4 100644 >> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt >> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt >> @@ -130,6 +130,7 @@ invensense InvenSense Inc. >> isee ISEE 2007 S.L. >> isil Intersil >> issi Integrated Silicon Solutions Inc. >> +jdi Japan Display Inc. >> jedec JEDEC Solid State Technology Association >> karo Ka-Ro electronics GmbH >> keymile Keymile GmbH >> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig >> index 1500ab9..f41690e 100644 >> --- a/drivers/gpu/drm/panel/Kconfig >> +++ b/drivers/gpu/drm/panel/Kconfig >> @@ -61,6 +61,17 @@ config DRM_PANEL_SHARP_LQ101R1SX01 >> To compile this driver as a module, choose M here: the module >> will be called panel-sharp-lq101r1sx01. >> >> +config DRM_PANEL_JDI_LT070ME05000 >> + tristate "JDI LT070ME05000 WUXGA DSI panel" >> + depends on OF >> + depends on DRM_MIPI_DSI >> + depends on BACKLIGHT_CLASS_DEVICE >> + help >> + Say Y here if you want to enable support for JDI WUXGA DSI >> video/ >> + command mode panel as found in Google Nexus 7 (2013) devices. >> + The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses >> + 24 bit RGB per pixel. >> + >> config DRM_PANEL_SHARP_LS043T1LE01 >> tristate "Sharp LS043T1LE01 qHD video mode panel" >> depends on OF >> diff --git a/drivers/gpu/drm/panel/Makefile >> b/drivers/gpu/drm/panel/Makefile >> index f277eed..e6c6fc8 100644 >> --- a/drivers/gpu/drm/panel/Makefile >> +++ b/drivers/gpu/drm/panel/Makefile >> @@ -5,3 +5,4 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += >> panel-samsung-ld9040.o >> obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o >> obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o >> obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o >> +obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o >> diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c >> b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c >> new file mode 100644 >> index 0000000..051aa1b >> --- /dev/null >> +++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c >> @@ -0,0 +1,685 @@ >> +/* >> + * Copyright (C) 2015 InforceComputing >> + * Author: Vinay Simha BN <simhavcs@gmail.com> >> + * >> + * Copyright (C) 2015 Linaro Ltd >> + * Author: Sumit Semwal <sumit.semwal@linaro.org> >> + * >> + * This program is free software; you can redistribute it and/or modify >> it >> + * under the terms of the GNU General Public License version 2 as >> published by >> + * the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, but >> WITHOUT >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License >> for >> + * more details. >> + * >> + * You should have received a copy of the GNU General Public License >> along with >> + * this program. If not, see <http://www.gnu.org/licenses/>. >> + */ >> + >> +#include <linux/backlight.h> >> +#include <linux/gpio/consumer.h> >> +#include <linux/module.h> >> +#include <linux/of.h> >> +#include <linux/regulator/consumer.h> >> + >> +#include <drm/drmP.h> >> +#include <drm/drm_crtc.h> >> +#include <drm/drm_mipi_dsi.h> >> +#include <drm/drm_panel.h> >> + >> +#include <video/mipi_display.h> >> + >> +/* >> + * From internet archives, the panel for Nexus 7 2nd Gen, 2013 model is a >> + * JDI model LT070ME05000, and its data sheet is at: >> + * http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet >> + */ >> +struct jdi_panel { >> + struct drm_panel base; >> + struct mipi_dsi_device *dsi; >> + >> + /* TODO: Add backilght support */ >> + struct backlight_device *backlight; >> + struct regulator *supply; >> + struct gpio_desc *reset_gpio; >> + struct gpio_desc *enable_gpio; >> + struct gpio_desc *vcc_gpio; >> + >> + struct regulator *backlit; >> + struct regulator *lvs7; >> + struct regulator *avdd; >> + struct regulator *iovdd; >> + struct gpio_desc *pwm_gpio; >> + >> + bool prepared; >> + bool enabled; >> + >> + const struct drm_display_mode *mode; >> +}; >> + >> +static inline struct jdi_panel *to_jdi_panel(struct drm_panel *panel) >> +{ >> + return container_of(panel, struct jdi_panel, base); >> +} >> + >> +static char MCAP[2] = {0xB0, 0x00}; >> +static char interface_setting_cmd[6] = {0xB3, 0x04, 0x08, 0x00, 0x22, >> 0x00}; >> +static char interface_setting[6] = {0xB3, 0x26, 0x08, 0x00, 0x20, 0x00}; >> + >> +static char interface_ID_setting[2] = {0xB4, 0x0C}; >> +static char DSI_control[3] = {0xB6, 0x3A, 0xD3}; >> + >> +static char tear_scan_line[3] = {0x44, 0x03, 0x00}; >> + >> +/* for fps control, set fps to 60.32Hz */ >> +static char LTPS_timing_setting[2] = {0xC6, 0x78}; >> +static char sequencer_timing_control[2] = {0xD6, 0x01}; >> + >> +/* set brightness */ >> +static char write_display_brightness[] = {0x51, 0xFF}; >> +/* enable LEDPWM pin output, turn on LEDPWM output, turn off pwm dimming >> */ >> +static char write_control_display[] = {0x53, 0x24}; >> +/* >> + * choose cabc mode, 0x00(-0%), 0x01(-15%), 0x02(-40%), 0x03(-54%), >> + * disable SRE(sunlight readability enhancement) >> + */ >> +static char write_cabc[] = {0x55, 0x00}; >> +/* for cabc mode 0x1(-15%) */ >> +static char backlight_control1[] = {0xB8, 0x07, 0x87, 0x26, 0x18, 0x00, >> 0x32}; >> +/* for cabc mode 0x2(-40%) */ >> +static char backlight_control2[] = {0xB9, 0x07, 0x75, 0x61, 0x20, 0x16, >> 0x87}; >> +/* for cabc mode 0x3(-54%) */ >> +static char backlight_control3[] = {0xBA, 0x07, 0x70, 0x81, 0x20, 0x45, >> 0xB4}; >> +/* for pwm frequency and dimming control */ >> +static char backlight_control4[] = {0xCE, 0x7D, 0x40, 0x48, 0x56, 0x67, >> 0x78, >> + 0x88, 0x98, 0xA7, 0xB5, 0xC3, 0xD1, 0xDE, 0xE9, 0xF2, >> 0xFA, >> + 0xFF, 0x37, 0xF5, 0x0F, 0x0F, 0x42, 0x00}; > > > Apart from the u8 conversion as mentioned by Thierry, you should > convert these to const too. > > >> + >> +static int jdi_panel_init(struct jdi_panel *jdi) >> +{ >> + struct mipi_dsi_device *dsi = jdi->dsi; >> + int ret; >> + >> + dsi->mode_flags |= MIPI_DSI_MODE_LPM; >> + >> + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { >> + ret = mipi_dsi_dcs_soft_reset(dsi); >> + if (ret < 0) >> + return ret; >> + >> + mdelay(10); >> + >> + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x70); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, >> 0x04AF); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_tear_on(dsi, >> + >> MIPI_DSI_DCS_TEAR_MODE_VBLANK); >> + if (ret < 0) >> + return ret; >> + mdelay(5); >> + >> + ret = mipi_dsi_generic_write(dsi, tear_scan_line, >> + sizeof(tear_scan_line)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, >> write_display_brightness, >> + >> sizeof(write_display_brightness) >> + ); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, >> write_control_display, >> + >> sizeof(write_control_display)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc, >> + sizeof(write_cabc)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); >> + if (ret < 0) >> + return ret; >> + mdelay(120); >> + >> + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); >> + if (ret < 0) >> + return ret; >> + mdelay(10); >> + >> + ret = mipi_dsi_generic_write(dsi, interface_setting, >> + sizeof(interface_setting)); >> + if (ret < 0) >> + return ret; >> + mdelay(20); >> + >> + backlight_control4[18] = 0x04; >> + backlight_control4[19] = 0x00; > > > Any reason why these are overwritten? It would be better to have these > values in the array itself. > > >> + >> + ret = mipi_dsi_generic_write(dsi, backlight_control4, >> + sizeof(backlight_control4)); >> + if (ret < 0) >> + return ret; >> + mdelay(20); >> + >> + MCAP[1] = 0x03; >> + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); >> + if (ret < 0) >> + return ret; >> + } else { >> + /* >> + * TODO : need to verify panel settings when >> + * dsi cmd mode supported for apq8064 - simhavcs >> + */ >> + ret = mipi_dsi_dcs_soft_reset(dsi); >> + if (ret < 0) >> + return ret; >> + >> + mdelay(5); >> + >> + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_generic_write(dsi, interface_setting_cmd, >> + >> sizeof(interface_setting_cmd)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_generic_write(dsi, interface_ID_setting, >> + >> sizeof(interface_ID_setting)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_generic_write(dsi, DSI_control, >> + sizeof(DSI_control)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_generic_write(dsi, LTPS_timing_setting, >> + sizeof(LTPS_timing_setting)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_generic_write(dsi, >> sequencer_timing_control, >> + >> sizeof(sequencer_timing_control)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, >> write_display_brightness, >> + >> sizeof(write_display_brightness) >> + ); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, >> write_control_display, >> + >> sizeof(write_control_display)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc, >> + sizeof(write_cabc)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_generic_write(dsi, backlight_control1, >> + sizeof(backlight_control1)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_generic_write(dsi, backlight_control2, >> + sizeof(backlight_control2)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_generic_write(dsi, backlight_control3, >> + sizeof(backlight_control3)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_generic_write(dsi, backlight_control4, >> + sizeof(backlight_control4)); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, >> 0x04AF); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F); >> + if (ret < 0) >> + return ret; >> + mdelay(120); >> + >> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); >> + if (ret < 0) >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +static int jdi_panel_on(struct jdi_panel *jdi) >> +{ >> + struct mipi_dsi_device *dsi = jdi->dsi; >> + int ret; >> + >> + dsi->mode_flags |= MIPI_DSI_MODE_LPM; >> + >> + ret = mipi_dsi_dcs_set_display_on(dsi); >> + if (ret < 0) >> + return ret; >> + >> + return 0; >> +} >> + >> +static int jdi_panel_off(struct jdi_panel *jdi) >> +{ >> + struct mipi_dsi_device *dsi = jdi->dsi; >> + int ret; >> + >> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; >> + >> + ret = mipi_dsi_dcs_set_display_off(dsi); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); >> + if (ret < 0) >> + return ret; >> + >> + ret = mipi_dsi_dcs_set_tear_off(dsi); >> + if (ret < 0) >> + return ret; >> + >> + msleep(100); >> + >> + return 0; >> +} >> + >> +static int jdi_panel_disable(struct drm_panel *panel) >> +{ >> + struct jdi_panel *jdi = to_jdi_panel(panel); >> + >> + if (!jdi->enabled) >> + return 0; >> + >> + DRM_DEBUG("disable\n"); >> + >> + if (jdi->backlight) { >> + jdi->backlight->props.power = FB_BLANK_POWERDOWN; >> + backlight_update_status(jdi->backlight); >> + } >> + >> + jdi->enabled = false; >> + >> + return 0; >> +} >> + >> +static int jdi_panel_unprepare(struct drm_panel *panel) >> +{ >> + struct jdi_panel *jdi = to_jdi_panel(panel); >> + int ret; >> + >> + if (!jdi->prepared) >> + return 0; >> + >> + DRM_DEBUG("unprepare\n"); >> + >> + ret = jdi_panel_off(jdi); >> + if (ret) { >> + dev_err(panel->dev, "failed to set panel off: %d\n", ret); >> + return ret; >> + } >> + >> + regulator_disable(jdi->supply); >> + >> + if (jdi->vcc_gpio) >> + gpiod_set_value(jdi->vcc_gpio, 0); >> + >> + if (jdi->reset_gpio) >> + gpiod_set_value(jdi->reset_gpio, 0); >> + >> + if (jdi->enable_gpio) >> + gpiod_set_value(jdi->enable_gpio, 0); >> + >> + jdi->prepared = false; >> + >> + return 0; >> +} >> + >> +static int jdi_panel_prepare(struct drm_panel *panel) >> +{ >> + struct jdi_panel *jdi = to_jdi_panel(panel); >> + int ret; >> + >> + if (jdi->prepared) >> + return 0; >> + >> + DRM_DEBUG("prepare\n"); >> + >> + ret = regulator_enable(jdi->iovdd); >> + if (ret < 0) >> + return ret; >> + >> + ret = regulator_enable(jdi->avdd); >> + if (ret < 0) >> + return ret; >> + >> + ret = regulator_enable(jdi->backlit); >> + if (ret < 0) >> + return ret; >> + >> + ret = regulator_enable(jdi->lvs7); >> + if (ret < 0) >> + return ret; >> + >> + ret = regulator_enable(jdi->supply); >> + if (ret < 0) >> + return ret; >> + >> + msleep(20); >> + >> + if (jdi->vcc_gpio) { >> + gpiod_set_value(jdi->vcc_gpio, 1); >> + usleep_range(10, 20); >> + } >> + >> + if (jdi->reset_gpio) { >> + gpiod_set_value(jdi->reset_gpio, 1); >> + usleep_range(10, 20); >> + } >> + >> + if (jdi->pwm_gpio) { >> + gpiod_set_value(jdi->pwm_gpio, 1); >> + usleep_range(10, 20); >> + } >> + >> + if (jdi->enable_gpio) { >> + gpiod_set_value(jdi->enable_gpio, 1); >> + usleep_range(10, 20); >> + } >> + >> + ret = jdi_panel_init(jdi); >> + if (ret) { >> + dev_err(panel->dev, "failed to init panel: %d\n", ret); >> + goto poweroff; >> + } >> + >> + ret = jdi_panel_on(jdi); >> + if (ret) { >> + dev_err(panel->dev, "failed to set panel on: %d\n", ret); >> + goto poweroff; >> + } >> + >> + jdi->prepared = true; >> + >> + return 0; >> + >> +poweroff: >> + regulator_disable(jdi->supply); >> + if (jdi->reset_gpio) >> + gpiod_set_value(jdi->reset_gpio, 0); >> + if (jdi->enable_gpio) >> + gpiod_set_value(jdi->enable_gpio, 0); >> + if (jdi->vcc_gpio) >> + gpiod_set_value(jdi->vcc_gpio, 0); >> + >> + return ret; >> +} >> + >> +static int jdi_panel_enable(struct drm_panel *panel) >> +{ >> + struct jdi_panel *jdi = to_jdi_panel(panel); >> + >> + if (jdi->enabled) >> + return 0; >> + >> + DRM_DEBUG("enable\n"); >> + >> + if (jdi->backlight) { >> + jdi->backlight->props.power = FB_BLANK_UNBLANK; >> + backlight_update_status(jdi->backlight); >> + } >> + >> + jdi->enabled = true; >> + >> + return 0; >> +} > > > The prepare/enable split seems a bit strange. Don't we want to put > mipi_dsi_dcs_set_display_on in the enable() op too? enable will be called after the prepare(). enable() - usually the backlight update status BLANK/UNBLANK is done > >> + >> +static const struct drm_display_mode default_mode = { >> + .clock = 155000, > > > htotal * vtotal * vrefresh (1934 * 1340 * 60.32(as in comment)) comes > at around 156.3 Mhz. Could you plug in the correct frequency? > >> + .hdisplay = 1200, >> + .hsync_start = 1200 + 48, >> + .hsync_end = 1200 + 48 + 32, >> + .htotal = 1200 + 48 + 32 + 60, >> + .vdisplay = 1920, >> + .vsync_start = 1920 + 3, >> + .vsync_end = 1920 + 3 + 5, >> + .vtotal = 1920 + 3 + 5 + 6, >> + .vrefresh = 60, >> + .flags = 0, >> +}; >> + >> +static int jdi_panel_get_modes(struct drm_panel *panel) >> +{ >> + struct drm_display_mode *mode; >> + >> + mode = drm_mode_duplicate(panel->drm, &default_mode); >> + if (!mode) { >> + dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n", >> + default_mode.hdisplay, default_mode.vdisplay, >> + default_mode.vrefresh); > > > We should use the dsi->dev device pointer here like used elsewhere, not > the drm device pointer. > > >> + return -ENOMEM; >> + } >> + >> + drm_mode_set_name(mode); >> + >> + drm_mode_probed_add(panel->connector, mode); >> + >> + return 1; >> +} >> + >> +static const struct drm_panel_funcs jdi_panel_funcs = { >> + .disable = jdi_panel_disable, >> + .unprepare = jdi_panel_unprepare, >> + .prepare = jdi_panel_prepare, >> + .enable = jdi_panel_enable, >> + .get_modes = jdi_panel_get_modes, >> +}; >> + >> +static const struct of_device_id jdi_of_match[] = { >> + { .compatible = "jdi,lt070me05000", }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, jdi_of_match); >> + >> +static int jdi_panel_add(struct jdi_panel *jdi) >> +{ >> + struct device *dev = &jdi->dsi->dev; >> + int ret; >> + >> + jdi->mode = &default_mode; >> + >> + /* lvs5 */ >> + jdi->supply = devm_regulator_get(dev, "power"); >> + if (IS_ERR(jdi->supply)) >> + return PTR_ERR(jdi->supply); > > > You could consider using regulator_get_bulk() api here, it would clean > up the code a bit. > > >> + >> + /* l17 */ >> + jdi->backlit = devm_regulator_get(dev, "backlit"); >> + if (IS_ERR(jdi->supply)) >> + return PTR_ERR(jdi->supply); >> + >> + jdi->lvs7 = devm_regulator_get(dev, "lvs7"); >> + if (IS_ERR(jdi->lvs7)) >> + return PTR_ERR(jdi->lvs7); >> + >> + jdi->avdd = devm_regulator_get(dev, "avdd"); >> + if (IS_ERR(jdi->avdd)) >> + return PTR_ERR(jdi->avdd); >> + >> + jdi->iovdd = devm_regulator_get(dev, "iovdd"); >> + if (IS_ERR(jdi->iovdd)) >> + return PTR_ERR(jdi->iovdd); >> + >> + jdi->vcc_gpio = devm_gpiod_get(dev, "vcc", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->vcc_gpio)) { >> + dev_err(dev, "cannot get vcc-gpio %ld\n", >> + PTR_ERR(jdi->vcc_gpio)); >> + jdi->vcc_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->vcc_gpio, 0); >> + } >> + >> + jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->reset_gpio)) { >> + dev_err(dev, "cannot get reset-gpios %ld\n", >> + PTR_ERR(jdi->reset_gpio)); >> + jdi->reset_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->reset_gpio, 0); >> + } >> + >> + jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->enable_gpio)) { >> + dev_err(dev, "cannot get enable-gpio %ld\n", >> + PTR_ERR(jdi->enable_gpio)); >> + jdi->enable_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->enable_gpio, 0); >> + } >> + >> + jdi->pwm_gpio = devm_gpiod_get(dev, "pwm", GPIOD_OUT_LOW); >> + if (IS_ERR(jdi->pwm_gpio)) { >> + dev_err(dev, "cannot get pwm-gpio %ld\n", >> + PTR_ERR(jdi->pwm_gpio)); >> + jdi->pwm_gpio = NULL; >> + } else { >> + gpiod_direction_output(jdi->pwm_gpio, 0); >> + } >> + >> + /* we don't have backlight right now, proceed further */ >> +#ifdef BACKLIGHT >> + np = of_parse_phandle(dev->of_node, "backlight", 0); >> + if (np) { >> + jdi->backlight = of_find_backlight_by_node(np); >> + of_node_put(np); >> + >> + if (!jdi->backlight) >> + return -EPROBE_DEFER; >> + } >> +#endif >> + >> + drm_panel_init(&jdi->base); >> + jdi->base.funcs = &jdi_panel_funcs; >> + jdi->base.dev = &jdi->dsi->dev; >> + >> + ret = drm_panel_add(&jdi->base); >> + if (ret < 0) >> + goto put_backlight; >> + >> + return 0; >> + >> +put_backlight: >> + if (jdi->backlight) >> + put_device(&jdi->backlight->dev); >> + >> + return ret; >> +} >> + >> +static void jdi_panel_del(struct jdi_panel *jdi) >> +{ >> + if (jdi->base.dev) >> + drm_panel_remove(&jdi->base); >> + >> + if (jdi->backlight) >> + put_device(&jdi->backlight->dev); >> +} >> + >> +static int jdi_panel_probe(struct mipi_dsi_device *dsi) >> +{ >> + struct jdi_panel *jdi; >> + int ret; >> + >> + dsi->lanes = 4; >> + dsi->format = MIPI_DSI_FMT_RGB888; >> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO | >> + MIPI_DSI_MODE_VIDEO_HFP | MIPI_DSI_MODE_VIDEO_HBP >> | >> + MIPI_DSI_MODE_VIDEO_HSA | >> + MIPI_DSI_CLOCK_NON_CONTINUOUS; >> + >> + jdi = devm_kzalloc(&dsi->dev, sizeof(*jdi), GFP_KERNEL); >> + if (!jdi) >> + return -ENOMEM; >> + >> + mipi_dsi_set_drvdata(dsi, jdi); >> + >> + jdi->dsi = dsi; >> + >> + ret = jdi_panel_add(jdi); >> + if (ret < 0) >> + return ret; >> + >> + return mipi_dsi_attach(dsi); >> +} >> + >> +static int jdi_panel_remove(struct mipi_dsi_device *dsi) >> +{ >> + struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi); >> + int ret; >> + >> + ret = jdi_panel_disable(&jdi->base); >> + if (ret < 0) >> + dev_err(&dsi->dev, "failed to disable panel: %d\n", ret); > > > Ideally, the driver's remove op shouldn't try to disable the panel. It > should be done by the dsi host's connector itself. We can drop this > unless there is a specfic reason to do so. > panel_disable() - sets the backlight brightness off fyi, include/drm/drm_panel.h Before stopping video transmission from the display controller it can be necessary to turn off the panel to avoid visual glitches. This is done in the .disable() function. > Thanks for working on this. > > Archit > > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > a Linux Foundation Collaborative Project
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt new file mode 100644 index 0000000..35c5ac7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt @@ -0,0 +1,27 @@ +JDI model LT070ME05000 1920x1200 7" DSI Panel + +Basic data sheet is at: + http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet + +This panel has video mode implemented currently in the driver. + +Required properties: +- compatible: should be "jdi,lt070me05000" + +Optional properties: +- power-supply: phandle of the regulator that provides the supply voltage +- reset-gpio: phandle of gpio for reset line +- backlight: phandle of the backlight device attached to the panel + +Example: + + dsi@54300000 { + panel: panel@0 { + compatible = "jdi,lt070me05000"; + reg = <0>; + + power-supply = <...>; + reset-gpio = <...>; + backlight = <...>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index a580f3e..ec42bb4 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -130,6 +130,7 @@ invensense InvenSense Inc. isee ISEE 2007 S.L. isil Intersil issi Integrated Silicon Solutions Inc. +jdi Japan Display Inc. jedec JEDEC Solid State Technology Association karo Ka-Ro electronics GmbH keymile Keymile GmbH diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 1500ab9..f41690e 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -61,6 +61,17 @@ config DRM_PANEL_SHARP_LQ101R1SX01 To compile this driver as a module, choose M here: the module will be called panel-sharp-lq101r1sx01. +config DRM_PANEL_JDI_LT070ME05000 + tristate "JDI LT070ME05000 WUXGA DSI panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for JDI WUXGA DSI video/ + command mode panel as found in Google Nexus 7 (2013) devices. + The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses + 24 bit RGB per pixel. + config DRM_PANEL_SHARP_LS043T1LE01 tristate "Sharp LS043T1LE01 qHD video mode panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index f277eed..e6c6fc8 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o +obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o diff --git a/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c new file mode 100644 index 0000000..051aa1b --- /dev/null +++ b/drivers/gpu/drm/panel/panel-jdi-lt070me05000.c @@ -0,0 +1,685 @@ +/* + * Copyright (C) 2015 InforceComputing + * Author: Vinay Simha BN <simhavcs@gmail.com> + * + * Copyright (C) 2015 Linaro Ltd + * Author: Sumit Semwal <sumit.semwal@linaro.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/backlight.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <drm/drmP.h> +#include <drm/drm_crtc.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> + +/* + * From internet archives, the panel for Nexus 7 2nd Gen, 2013 model is a + * JDI model LT070ME05000, and its data sheet is at: + * http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet + */ +struct jdi_panel { + struct drm_panel base; + struct mipi_dsi_device *dsi; + + /* TODO: Add backilght support */ + struct backlight_device *backlight; + struct regulator *supply; + struct gpio_desc *reset_gpio; + struct gpio_desc *enable_gpio; + struct gpio_desc *vcc_gpio; + + struct regulator *backlit; + struct regulator *lvs7; + struct regulator *avdd; + struct regulator *iovdd; + struct gpio_desc *pwm_gpio; + + bool prepared; + bool enabled; + + const struct drm_display_mode *mode; +}; + +static inline struct jdi_panel *to_jdi_panel(struct drm_panel *panel) +{ + return container_of(panel, struct jdi_panel, base); +} + +static char MCAP[2] = {0xB0, 0x00}; +static char interface_setting_cmd[6] = {0xB3, 0x04, 0x08, 0x00, 0x22, 0x00}; +static char interface_setting[6] = {0xB3, 0x26, 0x08, 0x00, 0x20, 0x00}; + +static char interface_ID_setting[2] = {0xB4, 0x0C}; +static char DSI_control[3] = {0xB6, 0x3A, 0xD3}; + +static char tear_scan_line[3] = {0x44, 0x03, 0x00}; + +/* for fps control, set fps to 60.32Hz */ +static char LTPS_timing_setting[2] = {0xC6, 0x78}; +static char sequencer_timing_control[2] = {0xD6, 0x01}; + +/* set brightness */ +static char write_display_brightness[] = {0x51, 0xFF}; +/* enable LEDPWM pin output, turn on LEDPWM output, turn off pwm dimming */ +static char write_control_display[] = {0x53, 0x24}; +/* + * choose cabc mode, 0x00(-0%), 0x01(-15%), 0x02(-40%), 0x03(-54%), + * disable SRE(sunlight readability enhancement) + */ +static char write_cabc[] = {0x55, 0x00}; +/* for cabc mode 0x1(-15%) */ +static char backlight_control1[] = {0xB8, 0x07, 0x87, 0x26, 0x18, 0x00, 0x32}; +/* for cabc mode 0x2(-40%) */ +static char backlight_control2[] = {0xB9, 0x07, 0x75, 0x61, 0x20, 0x16, 0x87}; +/* for cabc mode 0x3(-54%) */ +static char backlight_control3[] = {0xBA, 0x07, 0x70, 0x81, 0x20, 0x45, 0xB4}; +/* for pwm frequency and dimming control */ +static char backlight_control4[] = {0xCE, 0x7D, 0x40, 0x48, 0x56, 0x67, 0x78, + 0x88, 0x98, 0xA7, 0xB5, 0xC3, 0xD1, 0xDE, 0xE9, 0xF2, 0xFA, + 0xFF, 0x37, 0xF5, 0x0F, 0x0F, 0x42, 0x00}; + +static int jdi_panel_init(struct jdi_panel *jdi) +{ + struct mipi_dsi_device *dsi = jdi->dsi; + int ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { + ret = mipi_dsi_dcs_soft_reset(dsi); + if (ret < 0) + return ret; + + mdelay(10); + + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x70); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x04AF); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_set_tear_on(dsi, + MIPI_DSI_DCS_TEAR_MODE_VBLANK); + if (ret < 0) + return ret; + mdelay(5); + + ret = mipi_dsi_generic_write(dsi, tear_scan_line, + sizeof(tear_scan_line)); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_write_buffer(dsi, write_display_brightness, + sizeof(write_display_brightness) + ); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_write_buffer(dsi, write_control_display, + sizeof(write_control_display)); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc, + sizeof(write_cabc)); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) + return ret; + mdelay(120); + + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); + if (ret < 0) + return ret; + mdelay(10); + + ret = mipi_dsi_generic_write(dsi, interface_setting, + sizeof(interface_setting)); + if (ret < 0) + return ret; + mdelay(20); + + backlight_control4[18] = 0x04; + backlight_control4[19] = 0x00; + + ret = mipi_dsi_generic_write(dsi, backlight_control4, + sizeof(backlight_control4)); + if (ret < 0) + return ret; + mdelay(20); + + MCAP[1] = 0x03; + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); + if (ret < 0) + return ret; + } else { + /* + * TODO : need to verify panel settings when + * dsi cmd mode supported for apq8064 - simhavcs + */ + ret = mipi_dsi_dcs_soft_reset(dsi); + if (ret < 0) + return ret; + + mdelay(5); + + ret = mipi_dsi_generic_write(dsi, MCAP, sizeof(MCAP)); + if (ret < 0) + return ret; + + ret = mipi_dsi_generic_write(dsi, interface_setting_cmd, + sizeof(interface_setting_cmd)); + if (ret < 0) + return ret; + + ret = mipi_dsi_generic_write(dsi, interface_ID_setting, + sizeof(interface_ID_setting)); + if (ret < 0) + return ret; + + ret = mipi_dsi_generic_write(dsi, DSI_control, + sizeof(DSI_control)); + if (ret < 0) + return ret; + + ret = mipi_dsi_generic_write(dsi, LTPS_timing_setting, + sizeof(LTPS_timing_setting)); + if (ret < 0) + return ret; + + ret = mipi_dsi_generic_write(dsi, sequencer_timing_control, + sizeof(sequencer_timing_control)); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_write_buffer(dsi, write_display_brightness, + sizeof(write_display_brightness) + ); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_write_buffer(dsi, write_control_display, + sizeof(write_control_display)); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_write_buffer(dsi, write_cabc, + sizeof(write_cabc)); + if (ret < 0) + return ret; + + ret = mipi_dsi_generic_write(dsi, backlight_control1, + sizeof(backlight_control1)); + if (ret < 0) + return ret; + + ret = mipi_dsi_generic_write(dsi, backlight_control2, + sizeof(backlight_control2)); + if (ret < 0) + return ret; + + ret = mipi_dsi_generic_write(dsi, backlight_control3, + sizeof(backlight_control3)); + if (ret < 0) + return ret; + + ret = mipi_dsi_generic_write(dsi, backlight_control4, + sizeof(backlight_control4)); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x04AF); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x077F); + if (ret < 0) + return ret; + mdelay(120); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) + return ret; + } + + return 0; +} + +static int jdi_panel_on(struct jdi_panel *jdi) +{ + struct mipi_dsi_device *dsi = jdi->dsi; + int ret; + + dsi->mode_flags |= MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret < 0) + return ret; + + return 0; +} + +static int jdi_panel_off(struct jdi_panel *jdi) +{ + struct mipi_dsi_device *dsi = jdi->dsi; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_set_tear_off(dsi); + if (ret < 0) + return ret; + + msleep(100); + + return 0; +} + +static int jdi_panel_disable(struct drm_panel *panel) +{ + struct jdi_panel *jdi = to_jdi_panel(panel); + + if (!jdi->enabled) + return 0; + + DRM_DEBUG("disable\n"); + + if (jdi->backlight) { + jdi->backlight->props.power = FB_BLANK_POWERDOWN; + backlight_update_status(jdi->backlight); + } + + jdi->enabled = false; + + return 0; +} + +static int jdi_panel_unprepare(struct drm_panel *panel) +{ + struct jdi_panel *jdi = to_jdi_panel(panel); + int ret; + + if (!jdi->prepared) + return 0; + + DRM_DEBUG("unprepare\n"); + + ret = jdi_panel_off(jdi); + if (ret) { + dev_err(panel->dev, "failed to set panel off: %d\n", ret); + return ret; + } + + regulator_disable(jdi->supply); + + if (jdi->vcc_gpio) + gpiod_set_value(jdi->vcc_gpio, 0); + + if (jdi->reset_gpio) + gpiod_set_value(jdi->reset_gpio, 0); + + if (jdi->enable_gpio) + gpiod_set_value(jdi->enable_gpio, 0); + + jdi->prepared = false; + + return 0; +} + +static int jdi_panel_prepare(struct drm_panel *panel) +{ + struct jdi_panel *jdi = to_jdi_panel(panel); + int ret; + + if (jdi->prepared) + return 0; + + DRM_DEBUG("prepare\n"); + + ret = regulator_enable(jdi->iovdd); + if (ret < 0) + return ret; + + ret = regulator_enable(jdi->avdd); + if (ret < 0) + return ret; + + ret = regulator_enable(jdi->backlit); + if (ret < 0) + return ret; + + ret = regulator_enable(jdi->lvs7); + if (ret < 0) + return ret; + + ret = regulator_enable(jdi->supply); + if (ret < 0) + return ret; + + msleep(20); + + if (jdi->vcc_gpio) { + gpiod_set_value(jdi->vcc_gpio, 1); + usleep_range(10, 20); + } + + if (jdi->reset_gpio) { + gpiod_set_value(jdi->reset_gpio, 1); + usleep_range(10, 20); + } + + if (jdi->pwm_gpio) { + gpiod_set_value(jdi->pwm_gpio, 1); + usleep_range(10, 20); + } + + if (jdi->enable_gpio) { + gpiod_set_value(jdi->enable_gpio, 1); + usleep_range(10, 20); + } + + ret = jdi_panel_init(jdi); + if (ret) { + dev_err(panel->dev, "failed to init panel: %d\n", ret); + goto poweroff; + } + + ret = jdi_panel_on(jdi); + if (ret) { + dev_err(panel->dev, "failed to set panel on: %d\n", ret); + goto poweroff; + } + + jdi->prepared = true; + + return 0; + +poweroff: + regulator_disable(jdi->supply); + if (jdi->reset_gpio) + gpiod_set_value(jdi->reset_gpio, 0); + if (jdi->enable_gpio) + gpiod_set_value(jdi->enable_gpio, 0); + if (jdi->vcc_gpio) + gpiod_set_value(jdi->vcc_gpio, 0); + + return ret; +} + +static int jdi_panel_enable(struct drm_panel *panel) +{ + struct jdi_panel *jdi = to_jdi_panel(panel); + + if (jdi->enabled) + return 0; + + DRM_DEBUG("enable\n"); + + if (jdi->backlight) { + jdi->backlight->props.power = FB_BLANK_UNBLANK; + backlight_update_status(jdi->backlight); + } + + jdi->enabled = true; + + return 0; +} + +static const struct drm_display_mode default_mode = { + .clock = 155000, + .hdisplay = 1200, + .hsync_start = 1200 + 48, + .hsync_end = 1200 + 48 + 32, + .htotal = 1200 + 48 + 32 + 60, + .vdisplay = 1920, + .vsync_start = 1920 + 3, + .vsync_end = 1920 + 3 + 5, + .vtotal = 1920 + 3 + 5 + 6, + .vrefresh = 60, + .flags = 0, +}; + +static int jdi_panel_get_modes(struct drm_panel *panel) +{ + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &default_mode); + if (!mode) { + dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + drm_mode_probed_add(panel->connector, mode); + + return 1; +} + +static const struct drm_panel_funcs jdi_panel_funcs = { + .disable = jdi_panel_disable, + .unprepare = jdi_panel_unprepare, + .prepare = jdi_panel_prepare, + .enable = jdi_panel_enable, + .get_modes = jdi_panel_get_modes, +}; + +static const struct of_device_id jdi_of_match[] = { + { .compatible = "jdi,lt070me05000", }, + { } +}; +MODULE_DEVICE_TABLE(of, jdi_of_match); + +static int jdi_panel_add(struct jdi_panel *jdi) +{ + struct device *dev = &jdi->dsi->dev; + int ret; + + jdi->mode = &default_mode; + + /* lvs5 */ + jdi->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(jdi->supply)) + return PTR_ERR(jdi->supply); + + /* l17 */ + jdi->backlit = devm_regulator_get(dev, "backlit"); + if (IS_ERR(jdi->supply)) + return PTR_ERR(jdi->supply); + + jdi->lvs7 = devm_regulator_get(dev, "lvs7"); + if (IS_ERR(jdi->lvs7)) + return PTR_ERR(jdi->lvs7); + + jdi->avdd = devm_regulator_get(dev, "avdd"); + if (IS_ERR(jdi->avdd)) + return PTR_ERR(jdi->avdd); + + jdi->iovdd = devm_regulator_get(dev, "iovdd"); + if (IS_ERR(jdi->iovdd)) + return PTR_ERR(jdi->iovdd); + + jdi->vcc_gpio = devm_gpiod_get(dev, "vcc", GPIOD_OUT_LOW); + if (IS_ERR(jdi->vcc_gpio)) { + dev_err(dev, "cannot get vcc-gpio %ld\n", + PTR_ERR(jdi->vcc_gpio)); + jdi->vcc_gpio = NULL; + } else { + gpiod_direction_output(jdi->vcc_gpio, 0); + } + + jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(jdi->reset_gpio)) { + dev_err(dev, "cannot get reset-gpios %ld\n", + PTR_ERR(jdi->reset_gpio)); + jdi->reset_gpio = NULL; + } else { + gpiod_direction_output(jdi->reset_gpio, 0); + } + + jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(jdi->enable_gpio)) { + dev_err(dev, "cannot get enable-gpio %ld\n", + PTR_ERR(jdi->enable_gpio)); + jdi->enable_gpio = NULL; + } else { + gpiod_direction_output(jdi->enable_gpio, 0); + } + + jdi->pwm_gpio = devm_gpiod_get(dev, "pwm", GPIOD_OUT_LOW); + if (IS_ERR(jdi->pwm_gpio)) { + dev_err(dev, "cannot get pwm-gpio %ld\n", + PTR_ERR(jdi->pwm_gpio)); + jdi->pwm_gpio = NULL; + } else { + gpiod_direction_output(jdi->pwm_gpio, 0); + } + + /* we don't have backlight right now, proceed further */ +#ifdef BACKLIGHT + np = of_parse_phandle(dev->of_node, "backlight", 0); + if (np) { + jdi->backlight = of_find_backlight_by_node(np); + of_node_put(np); + + if (!jdi->backlight) + return -EPROBE_DEFER; + } +#endif + + drm_panel_init(&jdi->base); + jdi->base.funcs = &jdi_panel_funcs; + jdi->base.dev = &jdi->dsi->dev; + + ret = drm_panel_add(&jdi->base); + if (ret < 0) + goto put_backlight; + + return 0; + +put_backlight: + if (jdi->backlight) + put_device(&jdi->backlight->dev); + + return ret; +} + +static void jdi_panel_del(struct jdi_panel *jdi) +{ + if (jdi->base.dev) + drm_panel_remove(&jdi->base); + + if (jdi->backlight) + put_device(&jdi->backlight->dev); +} + +static int jdi_panel_probe(struct mipi_dsi_device *dsi) +{ + struct jdi_panel *jdi; + int ret; + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_HFP | MIPI_DSI_MODE_VIDEO_HBP | + MIPI_DSI_MODE_VIDEO_HSA | + MIPI_DSI_CLOCK_NON_CONTINUOUS; + + jdi = devm_kzalloc(&dsi->dev, sizeof(*jdi), GFP_KERNEL); + if (!jdi) + return -ENOMEM; + + mipi_dsi_set_drvdata(dsi, jdi); + + jdi->dsi = dsi; + + ret = jdi_panel_add(jdi); + if (ret < 0) + return ret; + + return mipi_dsi_attach(dsi); +} + +static int jdi_panel_remove(struct mipi_dsi_device *dsi) +{ + struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = jdi_panel_disable(&jdi->base); + if (ret < 0) + dev_err(&dsi->dev, "failed to disable panel: %d\n", ret); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", + ret); + + drm_panel_detach(&jdi->base); + jdi_panel_del(jdi); + + return 0; +} + +static void jdi_panel_shutdown(struct mipi_dsi_device *dsi) +{ + struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi); + + jdi_panel_disable(&jdi->base); +} + +static struct mipi_dsi_driver jdi_panel_driver = { + .driver = { + .name = "panel-jdi-lt070me05000", + .of_match_table = jdi_of_match, + }, + .probe = jdi_panel_probe, + .remove = jdi_panel_remove, + .shutdown = jdi_panel_shutdown, +}; +module_mipi_dsi_driver(jdi_panel_driver); + +MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>"); +MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>"); +MODULE_DESCRIPTION("JDI WUXGA LT070ME05000 DSI video/command mode panel driver"); +MODULE_LICENSE("GPL v2");
Add support for the JDI lt070me05000 WUXGA DSI panel used in Nexus 7 2013 devices. Programming sequence for the panel is was originally found in the android-msm-flo-3.4-lollipop-release branch from: https://android.googlesource.com/kernel/msm.git And video mode setting is from dsi-panel-jdi-dualmipi1-video.dtsi file in: git://codeaurora.org/kernel/msm-3.10.git LNX.LA.3.6_rb1.27 Other fixes folded in were provided by Archit Taneja <archit.taneja@gmail.com> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> [sumit.semwal: Ported to the drm/panel framework] Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [jstultz: Cherry-picked to mainline, folded down other fixes from Vinay and Archit] Signed-off-by: John Stultz <john.stultz@linaro.org> --- .../bindings/display/panel/jdi,lt070me05000.txt | 27 + .../devicetree/bindings/vendor-prefixes.txt | 1 + drivers/gpu/drm/panel/Kconfig | 11 + drivers/gpu/drm/panel/Makefile | 1 + drivers/gpu/drm/panel/panel-jdi-lt070me05000.c | 685 +++++++++++++++++++++ 5 files changed, 725 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt create mode 100644 drivers/gpu/drm/panel/panel-jdi-lt070me05000.c