| Message ID | 1461163076-5959-1-git-send-email-javier@osg.samsung.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On 04/20/2016 04:37 PM, Javier Martinez Canillas wrote: > The driver not always prints the error code in case of a failure but this > information can be very useful for debugging. So let's print if available. > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > > --- > > Hello, > > This patch and 2/2 were only build tested because I don't have access to > a board using this IP block. I just noticed these issues when comparing > the i2c-s3c2410 driver with i2c-exynos5 where I did some fixes recently. > > I think the patches are simple enough that is safe to pick them but of > course testing will be highly appreciated. > > Best regards, > Javier > > Changes in v2: > - Don't print the errno code on probe since it's already printed by the > core. Suggested by Krzysztof Kozlowski. > > drivers/i2c/busses/i2c-s3c2410.c | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested on Trats2 (Exynos4412, samsung,s3c2440-i2c) Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Apr 20, 2016 at 10:37:55AM -0400, Javier Martinez Canillas wrote: > The driver not always prints the error code in case of a failure but this > information can be very useful for debugging. So let's print if available. > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > Applied to for-next, thanks!
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 362a6de54833..13f67df65c45 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -944,7 +944,7 @@ static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb, i2c_unlock_adapter(&i2c->adap); if (ret < 0) - dev_err(i2c->dev, "cannot find frequency\n"); + dev_err(i2c->dev, "cannot find frequency (%d)\n", ret); else dev_info(i2c->dev, "setting freq %d\n", got); } @@ -995,7 +995,8 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c) ret = gpio_request(gpio, "i2c-bus"); if (ret) { - dev_err(i2c->dev, "gpio [%d] request failed\n", gpio); + dev_err(i2c->dev, "gpio [%d] request failed (%d)\n", + gpio, ret); goto free_gpio; } }
The driver not always prints the error code in case of a failure but this information can be very useful for debugging. So let's print if available. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> --- Hello, This patch and 2/2 were only build tested because I don't have access to a board using this IP block. I just noticed these issues when comparing the i2c-s3c2410 driver with i2c-exynos5 where I did some fixes recently. I think the patches are simple enough that is safe to pick them but of course testing will be highly appreciated. Best regards, Javier Changes in v2: - Don't print the errno code on probe since it's already printed by the core. Suggested by Krzysztof Kozlowski. drivers/i2c/busses/i2c-s3c2410.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)