diff mbox

[1/2,v6] ASoC: dwc: Add custom PCM driver

Message ID 1467b43ff009213277fe8f092da40f0bb7609af4.1461749984.git.joabreu@synopsys.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jose Abreu April 27, 2016, 10:05 a.m. UTC
HDMI audio support was added to the AXS board using an
I2S cpu driver and a custom platform driver.

The platform driver supports two channels @ 16 bits with
rates 32k, 44.1k and 48k.

Although the mainline I2S driver uses ALSA DMA engine,
this controller can be built without DMA support so it
was necessary to add this custom platform driver so that
HDMI audio works in AXS boards.

The selection between the use of DMA engine or PIO mode
is detected by declaring or not the DMA parameters in
the device tree.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Cc: linux-kernel@vger.kernel.org
---

Changes v5 -> v6:
* Use SNDRV_DMA_TYPE_CONTINUOUS

Changes v4 -> v5:
* Resolve undefined references when compiling as module
* Use DMA properties in I2S to check which mode to use: PIO or DMA (as suggested by Lars-Peter Clausen)

Changes v3 -> v4:
* Reintroduced custom PCM driver
* Use DT boolean to switch between ALSA DMA engine PCM or custom PCM

Changes v2 -> v3:
* Removed pll_config functions (as suggested by Alexey Brodkin)
* Dropped custom platform driver, using now ALSA DMA engine
* Dropped IRQ handler for I2S

No changes v1 -> v2.

 sound/soc/dwc/Kconfig          |   9 ++
 sound/soc/dwc/Makefile         |   1 +
 sound/soc/dwc/designware.h     |  71 +++++++++++++
 sound/soc/dwc/designware_i2s.c |  94 ++++++++++++-----
 sound/soc/dwc/designware_pcm.c | 228 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 376 insertions(+), 27 deletions(-)
 create mode 100644 sound/soc/dwc/designware.h
 create mode 100644 sound/soc/dwc/designware_pcm.c

Comments

Jose Abreu April 29, 2016, 9:02 a.m. UTC | #1
Hi Mark,

Can you give me some comments regarding this patch? Am I following the right
track? This is the first time that I am using ALSA SoC so pardon me if I am
making some mistake. I would appreciate some kind of input. I tested this only
on a ARC SDP and it is working.

On 27-04-2016 11:05, Jose Abreu wrote:
> HDMI audio support was added to the AXS board using an
> I2S cpu driver and a custom platform driver.
>
> The platform driver supports two channels @ 16 bits with
> rates 32k, 44.1k and 48k.
>
> Although the mainline I2S driver uses ALSA DMA engine,
> this controller can be built without DMA support so it
> was necessary to add this custom platform driver so that
> HDMI audio works in AXS boards.
>
> The selection between the use of DMA engine or PIO mode
> is detected by declaring or not the DMA parameters in
> the device tree.
>
> Signed-off-by: Jose Abreu <joabreu@synopsys.com>
> Cc: Carlos Palminha <palminha@synopsys.com>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Liam Girdwood <lgirdwood@gmail.com>
> Cc: Jaroslav Kysela <perex@perex.cz>
> Cc: Takashi Iwai <tiwai@suse.com>
> Cc: Alexey Brodkin <abrodkin@synopsys.com>
> Cc: linux-snps-arc@lists.infradead.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-kernel@vger.kernel.org
> ---
>
> Changes v5 -> v6:
> * Use SNDRV_DMA_TYPE_CONTINUOUS
>
> Changes v4 -> v5:
> * Resolve undefined references when compiling as module
> * Use DMA properties in I2S to check which mode to use: PIO or DMA (as suggested by Lars-Peter Clausen)
>
> Changes v3 -> v4:
> * Reintroduced custom PCM driver
> * Use DT boolean to switch between ALSA DMA engine PCM or custom PCM
>
> Changes v2 -> v3:
> * Removed pll_config functions (as suggested by Alexey Brodkin)
> * Dropped custom platform driver, using now ALSA DMA engine
> * Dropped IRQ handler for I2S
>
> No changes v1 -> v2.
>
>  sound/soc/dwc/Kconfig          |   9 ++
>  sound/soc/dwc/Makefile         |   1 +
>  sound/soc/dwc/designware.h     |  71 +++++++++++++
>  sound/soc/dwc/designware_i2s.c |  94 ++++++++++++-----
>  sound/soc/dwc/designware_pcm.c | 228 +++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 376 insertions(+), 27 deletions(-)
>  create mode 100644 sound/soc/dwc/designware.h
>  create mode 100644 sound/soc/dwc/designware_pcm.c
>
> diff --git a/sound/soc/dwc/Kconfig b/sound/soc/dwc/Kconfig
> index d50e085..2a21120 100644
> --- a/sound/soc/dwc/Kconfig
> +++ b/sound/soc/dwc/Kconfig
> @@ -7,4 +7,13 @@ config SND_DESIGNWARE_I2S
>  	 Synopsys desigwnware I2S device. The device supports upto
>  	 maximum of 8 channels each for play and record.
>  
> +config SND_DESIGNWARE_PCM
> +	tristate "Synopsys I2S PCM Driver"
> +	help
> +	 Say Y or M if you want to add support for ALSA ASoC platform driver
> +	 using I2S.
> +
> +	 Select this option if you want to be able to create a sound interface
> +	 using the I2S device driver as CPU driver. Instead of using ALSA
> +	 DMA engine by selecting this driver a custom PCM driver will be used.
>  
> diff --git a/sound/soc/dwc/Makefile b/sound/soc/dwc/Makefile
> index 319371f..1b48bccc 100644
> --- a/sound/soc/dwc/Makefile
> +++ b/sound/soc/dwc/Makefile
> @@ -1,3 +1,4 @@
>  # SYNOPSYS Platform Support
>  obj-$(CONFIG_SND_DESIGNWARE_I2S) += designware_i2s.o
> +obj-$(CONFIG_SND_DESIGNWARE_PCM) += designware_pcm.o
>  
> diff --git a/sound/soc/dwc/designware.h b/sound/soc/dwc/designware.h
> new file mode 100644
> index 0000000..09fafee
> --- /dev/null
> +++ b/sound/soc/dwc/designware.h
> @@ -0,0 +1,71 @@
> +/*
> + * ALSA SoC Synopsys Audio Layer
> + *
> + * sound/soc/dwc/designware.h
> + *
> + * Copyright (C) 2016 Synopsys
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#ifndef __DESIGNWARE_H
> +#define __DESIGNWARE_H
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/kconfig.h>
> +#include <sound/designware_i2s.h>
> +#include <sound/dmaengine_pcm.h>
> +
> +struct dw_pcm_binfo {
> +	struct snd_pcm_substream *stream;
> +	unsigned char *dma_base;
> +	unsigned char *dma_pointer;
> +	unsigned int period_size_frames;
> +	unsigned int size;
> +	snd_pcm_uframes_t period_pointer;
> +	unsigned int total_periods;
> +	unsigned int current_period;
> +};
> +
> +union dw_i2s_snd_dma_data {
> +	struct i2s_dma_data pd;
> +	struct snd_dmaengine_dai_dma_data dt;
> +};
> +
> +struct dw_i2s_dev {
> +	void __iomem *i2s_base;
> +	struct clk *clk;
> +	int active;
> +	unsigned int capability;
> +	unsigned int quirks;
> +	unsigned int i2s_reg_comp1;
> +	unsigned int i2s_reg_comp2;
> +	struct device *dev;
> +	u32 ccr;
> +	u32 xfer_resolution;
> +	u32 fifo_th;
> +
> +	/* data related to DMA transfers b/w i2s and DMAC */
> +	bool use_dmaengine;
> +	union dw_i2s_snd_dma_data play_dma_data;
> +	union dw_i2s_snd_dma_data capture_dma_data;
> +	struct i2s_clk_config_data config;
> +	int (*i2s_clk_cfg)(struct i2s_clk_config_data *config);
> +	struct dw_pcm_binfo binfo;
> +};
> +
> +#if IS_ENABLED(CONFIG_SND_DESIGNWARE_PCM)
> +int dw_pcm_transfer(u32 *lsample, u32 *rsample, int bytes, int buf_size,
> +		struct dw_pcm_binfo *bi);
> +#else
> +int dw_pcm_transfer(u32 *lsample, u32 *rsample, int bytes, int buf_size,
> +		struct dw_pcm_binfo *bi)
> +{
> +	return 0;
> +}
> +#endif
> +
> +#endif
> diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
> index 0db69b7..5ee0faf 100644
> --- a/sound/soc/dwc/designware_i2s.c
> +++ b/sound/soc/dwc/designware_i2s.c
> @@ -24,6 +24,7 @@
>  #include <sound/pcm_params.h>
>  #include <sound/soc.h>
>  #include <sound/dmaengine_pcm.h>
> +#include "designware.h"
>  
>  /* common register for all channel */
>  #define IER		0x000
> @@ -84,31 +85,6 @@
>  #define MAX_CHANNEL_NUM		8
>  #define MIN_CHANNEL_NUM		2
>  
> -union dw_i2s_snd_dma_data {
> -	struct i2s_dma_data pd;
> -	struct snd_dmaengine_dai_dma_data dt;
> -};
> -
> -struct dw_i2s_dev {
> -	void __iomem *i2s_base;
> -	struct clk *clk;
> -	int active;
> -	unsigned int capability;
> -	unsigned int quirks;
> -	unsigned int i2s_reg_comp1;
> -	unsigned int i2s_reg_comp2;
> -	struct device *dev;
> -	u32 ccr;
> -	u32 xfer_resolution;
> -	u32 fifo_th;
> -
> -	/* data related to DMA transfers b/w i2s and DMAC */
> -	union dw_i2s_snd_dma_data play_dma_data;
> -	union dw_i2s_snd_dma_data capture_dma_data;
> -	struct i2s_clk_config_data config;
> -	int (*i2s_clk_cfg)(struct i2s_clk_config_data *config);
> -};
> -
>  static inline void i2s_write_reg(void __iomem *io_base, int reg, u32 val)
>  {
>  	writel(val, io_base + reg);
> @@ -145,6 +121,54 @@ static inline void i2s_clear_irqs(struct dw_i2s_dev *dev, u32 stream)
>  	}
>  }
>  
> +static irqreturn_t dw_i2s_irq_handler(int irq, void *dev_id)
> +{
> +	struct dw_i2s_dev *dev = dev_id;
> +	u32 isr[4], sleft[dev->fifo_th], sright[dev->fifo_th];
> +	int i, j, xfer_bytes = dev->config.data_width / 8;
> +	int dir = dev->binfo.stream->stream;
> +
> +	for (i = 0; i < 4; i++)
> +		isr[i] = i2s_read_reg(dev->i2s_base, ISR(i));
> +
> +	i2s_clear_irqs(dev, SNDRV_PCM_STREAM_PLAYBACK);
> +	i2s_clear_irqs(dev, SNDRV_PCM_STREAM_CAPTURE);
> +
> +	if (dev->use_dmaengine)
> +		return IRQ_HANDLED;
> +
> +	for (i = 0; i < 4; i++) {
> +		/* Copy only to/from first two channels
> +		 * TODO: Remaining channels
> +		 */
> +		if ((isr[i] & 0x10) && (i == 0) &&
> +				(dir == SNDRV_PCM_STREAM_PLAYBACK)) {
> +			/* TXFEM - TX FIFO is empty */
> +			dw_pcm_transfer(sleft, sright, xfer_bytes, dev->fifo_th,
> +					&dev->binfo);
> +			for (j = 0; j < dev->fifo_th; j++) {
> +				i2s_write_reg(dev->i2s_base, LRBR_LTHR(i),
> +						sleft[j]);
> +				i2s_write_reg(dev->i2s_base, RRBR_RTHR(i),
> +						sright[j]);
> +			}
> +		} else if ((isr[i] & 0x01) && (i == 0) &&
> +				(dir == SNDRV_PCM_STREAM_CAPTURE)) {
> +			/* RXDAM - RX FIFO is full */
> +			for (j = 0; j < dev->fifo_th; j++) {
> +				sleft[j] = i2s_read_reg(dev->i2s_base,
> +						LRBR_LTHR(i));
> +				sright[j] = i2s_read_reg(dev->i2s_base,
> +						RRBR_RTHR(i));
> +			}
> +			dw_pcm_transfer(sleft, sright, xfer_bytes, dev->fifo_th,
> +					&dev->binfo);
> +		}
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
>  static void i2s_start(struct dw_i2s_dev *dev,
>  		      struct snd_pcm_substream *substream)
>  {
> @@ -626,7 +650,7 @@ static int dw_i2s_probe(struct platform_device *pdev)
>  	const struct i2s_platform_data *pdata = pdev->dev.platform_data;
>  	struct dw_i2s_dev *dev;
>  	struct resource *res;
> -	int ret;
> +	int ret, irq_number;
>  	struct snd_soc_dai_driver *dw_i2s_dai;
>  	const char *clk_id;
>  
> @@ -649,6 +673,19 @@ static int dw_i2s_probe(struct platform_device *pdev)
>  	if (IS_ERR(dev->i2s_base))
>  		return PTR_ERR(dev->i2s_base);
>  
> +	irq_number = platform_get_irq(pdev, 0);
> +	if (irq_number <= 0) {
> +		dev_err(&pdev->dev, "get_irq fail\n");
> +		return -EINVAL;
> +	}
> +
> +	ret = devm_request_irq(&pdev->dev, irq_number, dw_i2s_irq_handler,
> +			IRQF_SHARED, "dw_i2s_irq_handler", dev);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "request_irq fail\n");
> +		return ret;
> +	}
> +
>  	dev->dev = &pdev->dev;
>  
>  	dev->i2s_reg_comp1 = I2S_COMP_PARAM_1;
> @@ -657,6 +694,7 @@ static int dw_i2s_probe(struct platform_device *pdev)
>  		dev->capability = pdata->cap;
>  		clk_id = NULL;
>  		dev->quirks = pdata->quirks;
> +		dev->use_dmaengine = false;
>  		if (dev->quirks & DW_I2S_QUIRK_COMP_REG_OFFSET) {
>  			dev->i2s_reg_comp1 = pdata->i2s_reg_comp1;
>  			dev->i2s_reg_comp2 = pdata->i2s_reg_comp2;
> @@ -664,6 +702,8 @@ static int dw_i2s_probe(struct platform_device *pdev)
>  		ret = dw_configure_dai_by_pd(dev, dw_i2s_dai, res, pdata);
>  	} else {
>  		clk_id = "i2sclk";
> +		dev->use_dmaengine = of_property_read_bool(pdev->dev.of_node,
> +				"dmas");
>  		ret = dw_configure_dai_by_dt(dev, dw_i2s_dai, res);
>  	}
>  	if (ret < 0)
> @@ -695,7 +735,7 @@ static int dw_i2s_probe(struct platform_device *pdev)
>  		goto err_clk_disable;
>  	}
>  
> -	if (!pdata) {
> +	if (dev->use_dmaengine) {
>  		ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
>  		if (ret) {
>  			dev_err(&pdev->dev,
> diff --git a/sound/soc/dwc/designware_pcm.c b/sound/soc/dwc/designware_pcm.c
> new file mode 100644
> index 0000000..beb4b99
> --- /dev/null
> +++ b/sound/soc/dwc/designware_pcm.c
> @@ -0,0 +1,228 @@
> +/*
> + * Synopsys I2S PCM Driver
> + *
> + * Copyright (C) 2016 Synopsys
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/slab.h>
> +#include <sound/pcm.h>
> +#include <sound/soc.h>
> +#include <sound/dmaengine_pcm.h>
> +#include "designware.h"
> +
> +#define BUFFER_BYTES_MAX	384000
> +#define PERIOD_BYTES_MIN	2048
> +#define PERIODS_MIN		8
> +
> +static const struct snd_pcm_hardware dw_pcm_hardware = {
> +	.info = SNDRV_PCM_INFO_INTERLEAVED |
> +		SNDRV_PCM_INFO_MMAP |
> +		SNDRV_PCM_INFO_MMAP_VALID |
> +		SNDRV_PCM_INFO_BLOCK_TRANSFER,
> +	.rates = SNDRV_PCM_RATE_32000 |
> +		SNDRV_PCM_RATE_44100 |
> +		SNDRV_PCM_RATE_48000,
> +	.rate_min = 32000,
> +	.rate_max = 48000,
> +	.formats = SNDRV_PCM_FMTBIT_S16_LE,
> +	.channels_min = 2,
> +	.channels_max = 2,
> +	.buffer_bytes_max = BUFFER_BYTES_MAX,
> +	.period_bytes_min = PERIOD_BYTES_MIN,
> +	.period_bytes_max = BUFFER_BYTES_MAX / PERIODS_MIN,
> +	.periods_min = PERIODS_MIN,
> +	.periods_max = BUFFER_BYTES_MAX / PERIOD_BYTES_MIN,
> +};
> +
> +int dw_pcm_transfer(u32 *lsample, u32 *rsample, int bytes, int buf_size,
> +		struct dw_pcm_binfo *bi)
> +{
> +	struct snd_pcm_runtime *rt = bi->stream->runtime;
> +	int dir = bi->stream->stream;
> +	int i;
> +
> +	for (i = 0; i < buf_size; i++) {
> +		if (dir == SNDRV_PCM_STREAM_PLAYBACK) {
> +			memcpy(&lsample[i], bi->dma_pointer, bytes);
> +			bi->dma_pointer += bytes;
> +			memcpy(&rsample[i], bi->dma_pointer, bytes);
> +			bi->dma_pointer += bytes;
> +		} else {
> +			memcpy(bi->dma_pointer, &lsample[i], bytes);
> +			bi->dma_pointer += bytes;
> +			memcpy(bi->dma_pointer, &rsample[i], bytes);
> +			bi->dma_pointer += bytes;
> +		}
> +	}
> +
> +	bi->period_pointer += bytes_to_frames(rt, bytes * 2 * buf_size);
> +
> +	if (bi->period_pointer >= (bi->period_size_frames * bi->current_period)) {
> +		bi->current_period++;
> +		if (bi->current_period > bi->total_periods) {
> +			bi->dma_pointer = bi->dma_base;
> +			bi->period_pointer = 0;
> +			bi->current_period = 1;
> +		}
> +		snd_pcm_period_elapsed(bi->stream);
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(dw_pcm_transfer);
> +
> +static int dw_pcm_open(struct snd_pcm_substream *substream)
> +{
> +	struct snd_soc_pcm_runtime *rtd = substream->private_data;
> +	struct snd_pcm_runtime *rt = substream->runtime;
> +	struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
> +
> +	snd_soc_set_runtime_hwparams(substream, &dw_pcm_hardware);
> +	snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
> +
> +	dev->binfo.stream = substream;
> +	rt->private_data = &dev->binfo;
> +	return 0;
> +}
> +
> +static int dw_pcm_close(struct snd_pcm_substream *substream)
> +{
> +	return 0;
> +}
> +
> +static int dw_pcm_hw_params(struct snd_pcm_substream *substream,
> +		struct snd_pcm_hw_params *hw_params)
> +{
> +	struct snd_pcm_runtime *rt = substream->runtime;
> +	struct dw_pcm_binfo *bi = rt->private_data;
> +	int ret;
> +
> +	ret = snd_pcm_lib_alloc_vmalloc_buffer(substream,
> +			params_buffer_bytes(hw_params));
> +	if (ret < 0)
> +		return ret;
> +
> +	memset(rt->dma_area, 0, params_buffer_bytes(hw_params));
> +	bi->dma_base = rt->dma_area;
> +	bi->dma_pointer = bi->dma_base;
> +
> +	return 0;
> +}
> +
> +static int dw_pcm_hw_free(struct snd_pcm_substream *substream)
> +{
> +	return snd_pcm_lib_free_vmalloc_buffer(substream);
> +}
> +
> +static int dw_pcm_prepare(struct snd_pcm_substream *substream)
> +{
> +	struct snd_pcm_runtime *rt = substream->runtime;
> +	struct dw_pcm_binfo *bi = rt->private_data;
> +	u32 buffer_size_frames = 0;
> +
> +	bi->period_size_frames = bytes_to_frames(rt,
> +			snd_pcm_lib_period_bytes(substream));
> +	bi->size = snd_pcm_lib_buffer_bytes(substream);
> +	buffer_size_frames = bytes_to_frames(rt, bi->size);
> +	bi->total_periods = buffer_size_frames / bi->period_size_frames;
> +	bi->current_period = 1;
> +
> +	if ((buffer_size_frames % bi->period_size_frames) != 0)
> +		return -EINVAL;
> +	if ((bi->size % (snd_pcm_format_width(rt->format) / 8)) != 0)
> +		return -EINVAL;
> +	return 0;
> +}
> +
> +static int dw_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
> +{
> +	switch (cmd) {
> +	case SNDRV_PCM_TRIGGER_START:
> +	case SNDRV_PCM_TRIGGER_RESUME:
> +		break;
> +	case SNDRV_PCM_TRIGGER_STOP:
> +	case SNDRV_PCM_TRIGGER_SUSPEND:
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static snd_pcm_uframes_t dw_pcm_pointer(struct snd_pcm_substream *substream)
> +{
> +	struct snd_pcm_runtime *rt = substream->runtime;
> +	struct dw_pcm_binfo *bi = rt->private_data;
> +
> +	return bi->period_pointer;
> +}
> +
> +static struct snd_pcm_ops dw_pcm_ops = {
> +	.open = dw_pcm_open,
> +	.close = dw_pcm_close,
> +	.ioctl = snd_pcm_lib_ioctl,
> +	.hw_params = dw_pcm_hw_params,
> +	.hw_free = dw_pcm_hw_free,
> +	.prepare = dw_pcm_prepare,
> +	.trigger = dw_pcm_trigger,
> +	.pointer = dw_pcm_pointer,
> +	.page = snd_pcm_lib_get_vmalloc_page,
> +	.mmap = snd_pcm_lib_mmap_vmalloc,
> +};
> +
> +static int dw_pcm_new(struct snd_soc_pcm_runtime *runtime)
> +{
> +	struct snd_pcm *pcm = runtime->pcm;
> +
> +	return snd_pcm_lib_preallocate_pages_for_all(pcm,
> +			SNDRV_DMA_TYPE_CONTINUOUS,
> +			snd_dma_continuous_data(GFP_KERNEL), BUFFER_BYTES_MAX,
> +			BUFFER_BYTES_MAX);
> +}
> +
> +static void dw_pcm_free(struct snd_pcm *pcm)
> +{
> +	snd_pcm_lib_preallocate_free_for_all(pcm);
> +}
> +
> +static struct snd_soc_platform_driver dw_pcm_platform = {
> +	.pcm_new = dw_pcm_new,
> +	.pcm_free = dw_pcm_free,
> +	.ops = &dw_pcm_ops,
> +};
> +
> +static int dw_pcm_probe(struct platform_device *pdev)
> +{
> +	return devm_snd_soc_register_platform(&pdev->dev, &dw_pcm_platform);
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id dw_pcm_of[] = {
> +	{ .compatible = "snps,designware-pcm" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, dw_pcm_of);
> +#endif
> +
> +static struct platform_driver dw_pcm_driver = {
> +	.driver = {
> +		.name = "designware-pcm",
> +		.of_match_table = of_match_ptr(dw_pcm_of),
> +	},
> +	.probe = dw_pcm_probe,
> +};
> +module_platform_driver(dw_pcm_driver);
> +
> +MODULE_AUTHOR("Jose Abreu <joabreu@synopsys.com>, Tiago Duarte");
> +MODULE_DESCRIPTION("Synopsys Designware PCM Driver");
> +MODULE_LICENSE("GPL v2");

Best regards,
Jose Miguel Abreu
Mark Brown April 29, 2016, 10:42 a.m. UTC | #2
On Fri, Apr 29, 2016 at 10:02:59AM +0100, Jose Abreu wrote:
> Hi Mark,
> 
> Can you give me some comments regarding this patch? Am I following the right
> track? This is the first time that I am using ALSA SoC so pardon me if I am
> making some mistake. I would appreciate some kind of input. I tested this only
> on a ARC SDP and it is working.
> 
> On 27-04-2016 11:05, Jose Abreu wrote:

Please don't send content free pings and please allow a reasonable time
for review.  People get busy, go on holiday, attend conferences and so 
on so unless there is some reason for urgency (like critical bug fixes)
please allow at least a couple of weeks for review.  Sending content
free pings just adds to the mail volume (if they are seen at all) and if 
something has gone wrong you'll have to resend the patches anyway.
Mark Brown May 4, 2016, 5:35 p.m. UTC | #3
On Wed, Apr 27, 2016 at 11:05:19AM +0100, Jose Abreu wrote:

> +	for (i = 0; i < 4; i++)
> +		isr[i] = i2s_read_reg(dev->i2s_base, ISR(i));
> +
> +	i2s_clear_irqs(dev, SNDRV_PCM_STREAM_PLAYBACK);
> +	i2s_clear_irqs(dev, SNDRV_PCM_STREAM_CAPTURE);
> +
> +	if (dev->use_dmaengine)
> +		return IRQ_HANDLED;

The driver should not report that it handled interrupts unless it
actually did so otherwise shared interrupts won't work and if something
goes wrong that causes the interrupt to scream then the interrupt core
won't be able to do any error handling.  The driver should instead check
to see if any interrupts occurred and only acknowledge those it actually
handled.

> @@ -649,6 +673,19 @@ static int dw_i2s_probe(struct platform_device *pdev)
>  	if (IS_ERR(dev->i2s_base))
>  		return PTR_ERR(dev->i2s_base);
>  
> +	irq_number = platform_get_irq(pdev, 0);
> +	if (irq_number <= 0) {
> +		dev_err(&pdev->dev, "get_irq fail\n");
> +		return -EINVAL;
> +	}

This will unconditionally fail if an interrupt is not provided which
will be incompatible with existing systems given that we don't currently
use the interrupt, I'm pretty sure you can find some in-tree devices
that get broken by this.  It's not like we even use the interrupt on
most systems so we should handle it being missing gracefully.

I'm also not seeing any code which masks or unmasks interrupts, if we
unconditionally enable interrupts we've no intention of using I'd expect
that will cause needless overhead for systems that don't use them.
Requesting it is fine but I'd expect to see the FIFO interrupts masked
in the device.

> +	ret = devm_request_irq(&pdev->dev, irq_number, dw_i2s_irq_handler,
> +			IRQF_SHARED, "dw_i2s_irq_handler", dev);
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "request_irq fail\n");
> +		return ret;
> +	}

Are you *sure* that this results in safe freeing of the interrupt?
Until the interrupt is freed the interrupt could still fire so the
handler would need to support things being freed while the interrupt is
firing.  It is safer to manually free.

> +		dev->use_dmaengine = of_property_read_bool(pdev->dev.of_node,
> +				"dmas");

> -	if (!pdata) {
> +	if (dev->use_dmaengine) {
>  		ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);

This breaks non-DT users like the AMD graphics card.

> +int dw_pcm_transfer(u32 *lsample, u32 *rsample, int bytes, int buf_size,
> +		struct dw_pcm_binfo *bi)
> +{
> +	struct snd_pcm_runtime *rt = bi->stream->runtime;
> +	int dir = bi->stream->stream;
> +	int i;
> +
> +	for (i = 0; i < buf_size; i++) {
> +		if (dir == SNDRV_PCM_STREAM_PLAYBACK) {
> +			memcpy(&lsample[i], bi->dma_pointer, bytes);
> +			bi->dma_pointer += bytes;
> +			memcpy(&rsample[i], bi->dma_pointer, bytes);
> +			bi->dma_pointer += bytes;

This code does not do DMA but it's using identifiers saying that it is
(which hence look like obvious bugs given that they're not using DMA
safe memory accesses).  This is just a scratch holding buffer AFAICT,
I'd expect to see code which says that explicitly.

It's not entirely clear that we have any bounds checking or anything to
make sure we stay within the buffer, there's an end of period reset but
it's hard to tell if that's enough.  I'm also not entirely sure why the
memcpy() is there at all - we appear to copy then immediately write to
FIFO which doesn't seem to add anything.

I'd also recommend looking at the xtfpga-i2s driver, it is for similar
hardware but avoids things like the memcpy().

> +static int dw_pcm_close(struct snd_pcm_substream *substream)
> +{
> +	return 0;
> +}

Remove empty functions, if that's not possible that's usually a sign
that the function needs to do something.

> +#ifdef CONFIG_OF
> +static const struct of_device_id dw_pcm_of[] = {
> +	{ .compatible = "snps,designware-pcm" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, dw_pcm_of);
> +#endif

This is adding a device tree binding but not documenting it.  All new
device tree bindings need to be documented.
diff mbox

Patch

diff --git a/sound/soc/dwc/Kconfig b/sound/soc/dwc/Kconfig
index d50e085..2a21120 100644
--- a/sound/soc/dwc/Kconfig
+++ b/sound/soc/dwc/Kconfig
@@ -7,4 +7,13 @@  config SND_DESIGNWARE_I2S
 	 Synopsys desigwnware I2S device. The device supports upto
 	 maximum of 8 channels each for play and record.
 
+config SND_DESIGNWARE_PCM
+	tristate "Synopsys I2S PCM Driver"
+	help
+	 Say Y or M if you want to add support for ALSA ASoC platform driver
+	 using I2S.
+
+	 Select this option if you want to be able to create a sound interface
+	 using the I2S device driver as CPU driver. Instead of using ALSA
+	 DMA engine by selecting this driver a custom PCM driver will be used.
 
diff --git a/sound/soc/dwc/Makefile b/sound/soc/dwc/Makefile
index 319371f..1b48bccc 100644
--- a/sound/soc/dwc/Makefile
+++ b/sound/soc/dwc/Makefile
@@ -1,3 +1,4 @@ 
 # SYNOPSYS Platform Support
 obj-$(CONFIG_SND_DESIGNWARE_I2S) += designware_i2s.o
+obj-$(CONFIG_SND_DESIGNWARE_PCM) += designware_pcm.o
 
diff --git a/sound/soc/dwc/designware.h b/sound/soc/dwc/designware.h
new file mode 100644
index 0000000..09fafee
--- /dev/null
+++ b/sound/soc/dwc/designware.h
@@ -0,0 +1,71 @@ 
+/*
+ * ALSA SoC Synopsys Audio Layer
+ *
+ * sound/soc/dwc/designware.h
+ *
+ * Copyright (C) 2016 Synopsys
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __DESIGNWARE_H
+#define __DESIGNWARE_H
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/kconfig.h>
+#include <sound/designware_i2s.h>
+#include <sound/dmaengine_pcm.h>
+
+struct dw_pcm_binfo {
+	struct snd_pcm_substream *stream;
+	unsigned char *dma_base;
+	unsigned char *dma_pointer;
+	unsigned int period_size_frames;
+	unsigned int size;
+	snd_pcm_uframes_t period_pointer;
+	unsigned int total_periods;
+	unsigned int current_period;
+};
+
+union dw_i2s_snd_dma_data {
+	struct i2s_dma_data pd;
+	struct snd_dmaengine_dai_dma_data dt;
+};
+
+struct dw_i2s_dev {
+	void __iomem *i2s_base;
+	struct clk *clk;
+	int active;
+	unsigned int capability;
+	unsigned int quirks;
+	unsigned int i2s_reg_comp1;
+	unsigned int i2s_reg_comp2;
+	struct device *dev;
+	u32 ccr;
+	u32 xfer_resolution;
+	u32 fifo_th;
+
+	/* data related to DMA transfers b/w i2s and DMAC */
+	bool use_dmaengine;
+	union dw_i2s_snd_dma_data play_dma_data;
+	union dw_i2s_snd_dma_data capture_dma_data;
+	struct i2s_clk_config_data config;
+	int (*i2s_clk_cfg)(struct i2s_clk_config_data *config);
+	struct dw_pcm_binfo binfo;
+};
+
+#if IS_ENABLED(CONFIG_SND_DESIGNWARE_PCM)
+int dw_pcm_transfer(u32 *lsample, u32 *rsample, int bytes, int buf_size,
+		struct dw_pcm_binfo *bi);
+#else
+int dw_pcm_transfer(u32 *lsample, u32 *rsample, int bytes, int buf_size,
+		struct dw_pcm_binfo *bi)
+{
+	return 0;
+}
+#endif
+
+#endif
diff --git a/sound/soc/dwc/designware_i2s.c b/sound/soc/dwc/designware_i2s.c
index 0db69b7..5ee0faf 100644
--- a/sound/soc/dwc/designware_i2s.c
+++ b/sound/soc/dwc/designware_i2s.c
@@ -24,6 +24,7 @@ 
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 #include <sound/dmaengine_pcm.h>
+#include "designware.h"
 
 /* common register for all channel */
 #define IER		0x000
@@ -84,31 +85,6 @@ 
 #define MAX_CHANNEL_NUM		8
 #define MIN_CHANNEL_NUM		2
 
-union dw_i2s_snd_dma_data {
-	struct i2s_dma_data pd;
-	struct snd_dmaengine_dai_dma_data dt;
-};
-
-struct dw_i2s_dev {
-	void __iomem *i2s_base;
-	struct clk *clk;
-	int active;
-	unsigned int capability;
-	unsigned int quirks;
-	unsigned int i2s_reg_comp1;
-	unsigned int i2s_reg_comp2;
-	struct device *dev;
-	u32 ccr;
-	u32 xfer_resolution;
-	u32 fifo_th;
-
-	/* data related to DMA transfers b/w i2s and DMAC */
-	union dw_i2s_snd_dma_data play_dma_data;
-	union dw_i2s_snd_dma_data capture_dma_data;
-	struct i2s_clk_config_data config;
-	int (*i2s_clk_cfg)(struct i2s_clk_config_data *config);
-};
-
 static inline void i2s_write_reg(void __iomem *io_base, int reg, u32 val)
 {
 	writel(val, io_base + reg);
@@ -145,6 +121,54 @@  static inline void i2s_clear_irqs(struct dw_i2s_dev *dev, u32 stream)
 	}
 }
 
+static irqreturn_t dw_i2s_irq_handler(int irq, void *dev_id)
+{
+	struct dw_i2s_dev *dev = dev_id;
+	u32 isr[4], sleft[dev->fifo_th], sright[dev->fifo_th];
+	int i, j, xfer_bytes = dev->config.data_width / 8;
+	int dir = dev->binfo.stream->stream;
+
+	for (i = 0; i < 4; i++)
+		isr[i] = i2s_read_reg(dev->i2s_base, ISR(i));
+
+	i2s_clear_irqs(dev, SNDRV_PCM_STREAM_PLAYBACK);
+	i2s_clear_irqs(dev, SNDRV_PCM_STREAM_CAPTURE);
+
+	if (dev->use_dmaengine)
+		return IRQ_HANDLED;
+
+	for (i = 0; i < 4; i++) {
+		/* Copy only to/from first two channels
+		 * TODO: Remaining channels
+		 */
+		if ((isr[i] & 0x10) && (i == 0) &&
+				(dir == SNDRV_PCM_STREAM_PLAYBACK)) {
+			/* TXFEM - TX FIFO is empty */
+			dw_pcm_transfer(sleft, sright, xfer_bytes, dev->fifo_th,
+					&dev->binfo);
+			for (j = 0; j < dev->fifo_th; j++) {
+				i2s_write_reg(dev->i2s_base, LRBR_LTHR(i),
+						sleft[j]);
+				i2s_write_reg(dev->i2s_base, RRBR_RTHR(i),
+						sright[j]);
+			}
+		} else if ((isr[i] & 0x01) && (i == 0) &&
+				(dir == SNDRV_PCM_STREAM_CAPTURE)) {
+			/* RXDAM - RX FIFO is full */
+			for (j = 0; j < dev->fifo_th; j++) {
+				sleft[j] = i2s_read_reg(dev->i2s_base,
+						LRBR_LTHR(i));
+				sright[j] = i2s_read_reg(dev->i2s_base,
+						RRBR_RTHR(i));
+			}
+			dw_pcm_transfer(sleft, sright, xfer_bytes, dev->fifo_th,
+					&dev->binfo);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
 static void i2s_start(struct dw_i2s_dev *dev,
 		      struct snd_pcm_substream *substream)
 {
@@ -626,7 +650,7 @@  static int dw_i2s_probe(struct platform_device *pdev)
 	const struct i2s_platform_data *pdata = pdev->dev.platform_data;
 	struct dw_i2s_dev *dev;
 	struct resource *res;
-	int ret;
+	int ret, irq_number;
 	struct snd_soc_dai_driver *dw_i2s_dai;
 	const char *clk_id;
 
@@ -649,6 +673,19 @@  static int dw_i2s_probe(struct platform_device *pdev)
 	if (IS_ERR(dev->i2s_base))
 		return PTR_ERR(dev->i2s_base);
 
+	irq_number = platform_get_irq(pdev, 0);
+	if (irq_number <= 0) {
+		dev_err(&pdev->dev, "get_irq fail\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_irq(&pdev->dev, irq_number, dw_i2s_irq_handler,
+			IRQF_SHARED, "dw_i2s_irq_handler", dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "request_irq fail\n");
+		return ret;
+	}
+
 	dev->dev = &pdev->dev;
 
 	dev->i2s_reg_comp1 = I2S_COMP_PARAM_1;
@@ -657,6 +694,7 @@  static int dw_i2s_probe(struct platform_device *pdev)
 		dev->capability = pdata->cap;
 		clk_id = NULL;
 		dev->quirks = pdata->quirks;
+		dev->use_dmaengine = false;
 		if (dev->quirks & DW_I2S_QUIRK_COMP_REG_OFFSET) {
 			dev->i2s_reg_comp1 = pdata->i2s_reg_comp1;
 			dev->i2s_reg_comp2 = pdata->i2s_reg_comp2;
@@ -664,6 +702,8 @@  static int dw_i2s_probe(struct platform_device *pdev)
 		ret = dw_configure_dai_by_pd(dev, dw_i2s_dai, res, pdata);
 	} else {
 		clk_id = "i2sclk";
+		dev->use_dmaengine = of_property_read_bool(pdev->dev.of_node,
+				"dmas");
 		ret = dw_configure_dai_by_dt(dev, dw_i2s_dai, res);
 	}
 	if (ret < 0)
@@ -695,7 +735,7 @@  static int dw_i2s_probe(struct platform_device *pdev)
 		goto err_clk_disable;
 	}
 
-	if (!pdata) {
+	if (dev->use_dmaengine) {
 		ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
 		if (ret) {
 			dev_err(&pdev->dev,
diff --git a/sound/soc/dwc/designware_pcm.c b/sound/soc/dwc/designware_pcm.c
new file mode 100644
index 0000000..beb4b99
--- /dev/null
+++ b/sound/soc/dwc/designware_pcm.c
@@ -0,0 +1,228 @@ 
+/*
+ * Synopsys I2S PCM Driver
+ *
+ * Copyright (C) 2016 Synopsys
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <sound/pcm.h>
+#include <sound/soc.h>
+#include <sound/dmaengine_pcm.h>
+#include "designware.h"
+
+#define BUFFER_BYTES_MAX	384000
+#define PERIOD_BYTES_MIN	2048
+#define PERIODS_MIN		8
+
+static const struct snd_pcm_hardware dw_pcm_hardware = {
+	.info = SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER,
+	.rates = SNDRV_PCM_RATE_32000 |
+		SNDRV_PCM_RATE_44100 |
+		SNDRV_PCM_RATE_48000,
+	.rate_min = 32000,
+	.rate_max = 48000,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+	.channels_min = 2,
+	.channels_max = 2,
+	.buffer_bytes_max = BUFFER_BYTES_MAX,
+	.period_bytes_min = PERIOD_BYTES_MIN,
+	.period_bytes_max = BUFFER_BYTES_MAX / PERIODS_MIN,
+	.periods_min = PERIODS_MIN,
+	.periods_max = BUFFER_BYTES_MAX / PERIOD_BYTES_MIN,
+};
+
+int dw_pcm_transfer(u32 *lsample, u32 *rsample, int bytes, int buf_size,
+		struct dw_pcm_binfo *bi)
+{
+	struct snd_pcm_runtime *rt = bi->stream->runtime;
+	int dir = bi->stream->stream;
+	int i;
+
+	for (i = 0; i < buf_size; i++) {
+		if (dir == SNDRV_PCM_STREAM_PLAYBACK) {
+			memcpy(&lsample[i], bi->dma_pointer, bytes);
+			bi->dma_pointer += bytes;
+			memcpy(&rsample[i], bi->dma_pointer, bytes);
+			bi->dma_pointer += bytes;
+		} else {
+			memcpy(bi->dma_pointer, &lsample[i], bytes);
+			bi->dma_pointer += bytes;
+			memcpy(bi->dma_pointer, &rsample[i], bytes);
+			bi->dma_pointer += bytes;
+		}
+	}
+
+	bi->period_pointer += bytes_to_frames(rt, bytes * 2 * buf_size);
+
+	if (bi->period_pointer >= (bi->period_size_frames * bi->current_period)) {
+		bi->current_period++;
+		if (bi->current_period > bi->total_periods) {
+			bi->dma_pointer = bi->dma_base;
+			bi->period_pointer = 0;
+			bi->current_period = 1;
+		}
+		snd_pcm_period_elapsed(bi->stream);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dw_pcm_transfer);
+
+static int dw_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_pcm_runtime *rt = substream->runtime;
+	struct dw_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
+
+	snd_soc_set_runtime_hwparams(substream, &dw_pcm_hardware);
+	snd_pcm_hw_constraint_integer(rt, SNDRV_PCM_HW_PARAM_PERIODS);
+
+	dev->binfo.stream = substream;
+	rt->private_data = &dev->binfo;
+	return 0;
+}
+
+static int dw_pcm_close(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+static int dw_pcm_hw_params(struct snd_pcm_substream *substream,
+		struct snd_pcm_hw_params *hw_params)
+{
+	struct snd_pcm_runtime *rt = substream->runtime;
+	struct dw_pcm_binfo *bi = rt->private_data;
+	int ret;
+
+	ret = snd_pcm_lib_alloc_vmalloc_buffer(substream,
+			params_buffer_bytes(hw_params));
+	if (ret < 0)
+		return ret;
+
+	memset(rt->dma_area, 0, params_buffer_bytes(hw_params));
+	bi->dma_base = rt->dma_area;
+	bi->dma_pointer = bi->dma_base;
+
+	return 0;
+}
+
+static int dw_pcm_hw_free(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_lib_free_vmalloc_buffer(substream);
+}
+
+static int dw_pcm_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *rt = substream->runtime;
+	struct dw_pcm_binfo *bi = rt->private_data;
+	u32 buffer_size_frames = 0;
+
+	bi->period_size_frames = bytes_to_frames(rt,
+			snd_pcm_lib_period_bytes(substream));
+	bi->size = snd_pcm_lib_buffer_bytes(substream);
+	buffer_size_frames = bytes_to_frames(rt, bi->size);
+	bi->total_periods = buffer_size_frames / bi->period_size_frames;
+	bi->current_period = 1;
+
+	if ((buffer_size_frames % bi->period_size_frames) != 0)
+		return -EINVAL;
+	if ((bi->size % (snd_pcm_format_width(rt->format) / 8)) != 0)
+		return -EINVAL;
+	return 0;
+}
+
+static int dw_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static snd_pcm_uframes_t dw_pcm_pointer(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *rt = substream->runtime;
+	struct dw_pcm_binfo *bi = rt->private_data;
+
+	return bi->period_pointer;
+}
+
+static struct snd_pcm_ops dw_pcm_ops = {
+	.open = dw_pcm_open,
+	.close = dw_pcm_close,
+	.ioctl = snd_pcm_lib_ioctl,
+	.hw_params = dw_pcm_hw_params,
+	.hw_free = dw_pcm_hw_free,
+	.prepare = dw_pcm_prepare,
+	.trigger = dw_pcm_trigger,
+	.pointer = dw_pcm_pointer,
+	.page = snd_pcm_lib_get_vmalloc_page,
+	.mmap = snd_pcm_lib_mmap_vmalloc,
+};
+
+static int dw_pcm_new(struct snd_soc_pcm_runtime *runtime)
+{
+	struct snd_pcm *pcm = runtime->pcm;
+
+	return snd_pcm_lib_preallocate_pages_for_all(pcm,
+			SNDRV_DMA_TYPE_CONTINUOUS,
+			snd_dma_continuous_data(GFP_KERNEL), BUFFER_BYTES_MAX,
+			BUFFER_BYTES_MAX);
+}
+
+static void dw_pcm_free(struct snd_pcm *pcm)
+{
+	snd_pcm_lib_preallocate_free_for_all(pcm);
+}
+
+static struct snd_soc_platform_driver dw_pcm_platform = {
+	.pcm_new = dw_pcm_new,
+	.pcm_free = dw_pcm_free,
+	.ops = &dw_pcm_ops,
+};
+
+static int dw_pcm_probe(struct platform_device *pdev)
+{
+	return devm_snd_soc_register_platform(&pdev->dev, &dw_pcm_platform);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id dw_pcm_of[] = {
+	{ .compatible = "snps,designware-pcm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, dw_pcm_of);
+#endif
+
+static struct platform_driver dw_pcm_driver = {
+	.driver = {
+		.name = "designware-pcm",
+		.of_match_table = of_match_ptr(dw_pcm_of),
+	},
+	.probe = dw_pcm_probe,
+};
+module_platform_driver(dw_pcm_driver);
+
+MODULE_AUTHOR("Jose Abreu <joabreu@synopsys.com>, Tiago Duarte");
+MODULE_DESCRIPTION("Synopsys Designware PCM Driver");
+MODULE_LICENSE("GPL v2");