[5/5] ARM: dts: qcom: pma8084: Add pwrkey entry
diff mbox

Message ID 1463634020-17252-6-git-send-email-andy.gross@linaro.org
State New, archived
Headers show

Commit Message

Andy Gross May 19, 2016, 5 a.m. UTC
This patch adds the power key device tree node.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
---
 arch/arm/boot/dts/qcom-pma8084.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Bjorn Andersson June 10, 2016, 8:29 p.m. UTC | #1
On Wed 18 May 22:00 PDT 2016, Andy Gross wrote:

> This patch adds the power key device tree node.
> 
> Signed-off-by: Andy Gross <andy.gross@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>  arch/arm/boot/dts/qcom-pma8084.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
> index ea7fce3..82d2580 100644
> --- a/arch/arm/boot/dts/qcom-pma8084.dtsi
> +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
> @@ -18,6 +18,14 @@
>  			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
>  		};
>  
> +		pwrkey@800 {
> +			compatible = "qcom,pm8941-pwrkey";
> +			reg = <0x800>;
> +			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
> +			debounce = <15625>;
> +			bias-pull-up;
> +		};
> +
>  		pma8084_gpios: gpios@c000 {
>  			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
>  			reg = <0xc000>;
> -- 
> 1.9.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Patch
diff mbox

diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index ea7fce3..82d2580 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -18,6 +18,14 @@ 
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
+		pwrkey@800 {
+			compatible = "qcom,pm8941-pwrkey";
+			reg = <0x800>;
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+		};
+
 		pma8084_gpios: gpios@c000 {
 			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;