Message ID | 1464100407-5935-1-git-send-email-dragos.bogdan@analog.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Dragos, Thank you for the patch. On Tuesday 24 May 2016 17:33:27 Dragos Bogdan wrote: > The part can be reset by a low pulse on the RESET pin (i.e. a hardware > reset) with a minimum width of 5 ms. It is recommended to wait 5 ms > after the low pulse before an I2C write is performed to the part. > For safety reasons, the delays will be between 5 and 10 ms. > > The RESET pin can be tied high, so the GPIO is optional. > > Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> > --- > Changes since v1: > - Replace mdelay() with usleep_range(); > - Limit the comments to 75 characters per line. > > drivers/media/i2c/adv7604.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c > index 41a1bfc..73c79bb 100644 > --- a/drivers/media/i2c/adv7604.c > +++ b/drivers/media/i2c/adv7604.c > @@ -164,6 +164,7 @@ struct adv76xx_state { > struct adv76xx_platform_data pdata; > > struct gpio_desc *hpd_gpio[4]; > + struct gpio_desc *reset_gpio; > > struct v4l2_subdev sd; > struct media_pad pads[ADV76XX_PAD_MAX]; > @@ -2996,6 +2997,21 @@ static int configure_regmaps(struct adv76xx_state > *state) return 0; > } > > +static int adv76xx_reset(struct adv76xx_state *state) Given that the function always returns 0 and that the return value is never checked I'd turn it into a void function. > +{ > + if (state->reset_gpio) { Nitpicking, if you write this as if (!state->reset_gpio) return; then you can lower the indendation of the following code block. That's a matter of style and preferences though, so I'll let you decide what you prefer. Apart from that, Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > + /* ADV76XX can be reset by a low reset pulse of minimum 5 ms. */ > + gpiod_set_value_cansleep(state->reset_gpio, 0); > + usleep_range(5000, 10000); > + gpiod_set_value_cansleep(state->reset_gpio, 1); > + /* It is recommended to wait 5 ms after the low pulse before */ > + /* an I2C write is performed to the ADV76XX. */ > + usleep_range(5000, 10000); > + } > + > + return 0; > +} > + > static int adv76xx_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > @@ -3059,6 +3075,12 @@ static int adv76xx_probe(struct i2c_client *client, > if (state->hpd_gpio[i]) > v4l_info(client, "Handling HPD %u GPIO\n", i); > } > + state->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", > + GPIOD_OUT_HIGH); > + if (IS_ERR(state->reset_gpio)) > + return PTR_ERR(state->reset_gpio); > + > + adv76xx_reset(state); > > state->timings = cea640x480; > state->format = adv76xx_format_info(state, MEDIA_BUS_FMT_YUYV8_2X8);
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 41a1bfc..73c79bb 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -164,6 +164,7 @@ struct adv76xx_state { struct adv76xx_platform_data pdata; struct gpio_desc *hpd_gpio[4]; + struct gpio_desc *reset_gpio; struct v4l2_subdev sd; struct media_pad pads[ADV76XX_PAD_MAX]; @@ -2996,6 +2997,21 @@ static int configure_regmaps(struct adv76xx_state *state) return 0; } +static int adv76xx_reset(struct adv76xx_state *state) +{ + if (state->reset_gpio) { + /* ADV76XX can be reset by a low reset pulse of minimum 5 ms. */ + gpiod_set_value_cansleep(state->reset_gpio, 0); + usleep_range(5000, 10000); + gpiod_set_value_cansleep(state->reset_gpio, 1); + /* It is recommended to wait 5 ms after the low pulse before */ + /* an I2C write is performed to the ADV76XX. */ + usleep_range(5000, 10000); + } + + return 0; +} + static int adv76xx_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -3059,6 +3075,12 @@ static int adv76xx_probe(struct i2c_client *client, if (state->hpd_gpio[i]) v4l_info(client, "Handling HPD %u GPIO\n", i); } + state->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(state->reset_gpio)) + return PTR_ERR(state->reset_gpio); + + adv76xx_reset(state); state->timings = cea640x480; state->format = adv76xx_format_info(state, MEDIA_BUS_FMT_YUYV8_2X8);
The part can be reset by a low pulse on the RESET pin (i.e. a hardware reset) with a minimum width of 5 ms. It is recommended to wait 5 ms after the low pulse before an I2C write is performed to the part. For safety reasons, the delays will be between 5 and 10 ms. The RESET pin can be tied high, so the GPIO is optional. Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> --- Changes since v1: - Replace mdelay() with usleep_range(); - Limit the comments to 75 characters per line. drivers/media/i2c/adv7604.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)