From patchwork Fri Jun 3 15:15:09 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Chris Zhong X-Patchwork-Id: 9153317 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 461006074E for ; Fri, 3 Jun 2016 15:19:04 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 3526C27BFA for ; Fri, 3 Jun 2016 15:19:04 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 29CF828304; Fri, 3 Jun 2016 15:19:04 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-4.1 required=2.0 tests=BAYES_00,DKIM_SIGNED, RCVD_IN_DNSWL_MED,T_DKIM_INVALID autolearn=ham version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 6D24927BFA for ; Fri, 3 Jun 2016 15:19:02 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1b8qsI-0001Al-5R; Fri, 03 Jun 2016 15:19:02 +0000 Received: from m50-112.126.com ([123.125.50.112]) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1b8qsB-00012l-L8; Fri, 03 Jun 2016 15:19:00 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=126.com; s=s110527; h=From:Subject:Date:Message-Id; bh=BMeslJmB9xugupXfUq jmQ8GKduRUlZ/3z/uzhXYwSWI=; b=d7BDZW4LCO3v+Ro30ylxalTiqHUzfLbIoY h+APx//gowpzCsE3679c7mrQzj1BbfG1DTR0c/b08rCal7GzRh60//ql+qpsj1Zd 1XjMKGBgkNAjWkOPqdjV7B/d7WUHMfEgyojHxjaP1SjYFHeQZRBFdmkeV4dzgcxD DoXY0MlAw= Received: from localhost.localdomain (unknown [211.97.105.9]) by smtp6 (Coremail) with SMTP id j9KowAA3pmF6n1FXuvuJAA--.1790S4; Fri, 03 Jun 2016 23:17:32 +0800 (CST) From: Chris Zhong To: dianders@chromium.org, tfiga@chromium.org, heiko@sntech.de, yzq@rock-chips.com Subject: [v1 PATCH 2/4] phy: Add USB Type-C PHY driver for rk3399 Date: Fri, 3 Jun 2016 23:15:09 +0800 Message-Id: <1464966911-18949-3-git-send-email-zyw@rock-chips.com> X-Mailer: git-send-email 2.6.3 In-Reply-To: <1464966911-18949-1-git-send-email-zyw@rock-chips.com> References: <1464966911-18949-1-git-send-email-zyw@rock-chips.com> X-CM-TRANSID: j9KowAA3pmF6n1FXuvuJAA--.1790S4 X-Coremail-Antispam: 1Uf129KBjvAXoWfKr1kZr47Gr4DArykGFW8Xrb_yoW5uFy5Ao Z7XFnxJw1rtr1fua10ka47Zr18Xw4kuasY9rnFqayxur9rZr1jkrn7Z3y0gw15Xry7KFs3 Arn3Xr43J3ZayFWUn29KB7ZKAUJUUUUU529EdanIXcx71UUUUU7v73VFW2AGmfu7bjvjm3 AaLaJ3UbIYCTnIWIevJa73UjIFyTuYvjxUIRwZUUUUU X-Originating-IP: [211.97.105.9] X-CM-SenderInfo: p21zt0rjttqiyswou0bp/1tbidB995FPgvQGq0QAAsG X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20160603_081857_897633_B8A3462D X-CRM114-Status: GOOD ( 15.91 ) X-BeenThere: linux-rockchip@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: Upstream kernel work for Rockchip platforms List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Kever Yang , linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, Chris Zhong , Kishon Vijay Abraham I , linux-arm-kernel@lists.infradead.org MIME-Version: 1.0 Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+patchwork-linux-rockchip=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB Type-C PHY is designed to support the USB3 and DP applications. The PHY basically has two main components: USB3 and DisplyPort. USB3 operates in SuperSpeed mode and the DP can operate at RBR, HBR and HBR2 data rates. Signed-off-by: Chris Zhong Signed-off-by: Kever Yang --- Changes in v1: - update the licence note - init core clock to 50MHz - use extcon API - remove unused global - add some comments for magic num - change usleep_range(1000, 2000) tousleep_range(1000, 1050) - remove __func__ from dev_err - return err number when get clk failed - remove ADDR_ADJ define - use devm_clk_get(&pdev->dev, "tcpdcore") drivers/phy/Kconfig | 7 + drivers/phy/Makefile | 1 + drivers/phy/phy-rockchip-typec.c | 942 +++++++++++++++++++++++++++++++++ include/linux/phy/phy-rockchip-typec.h | 20 + 4 files changed, 970 insertions(+) create mode 100644 drivers/phy/phy-rockchip-typec.c create mode 100644 include/linux/phy/phy-rockchip-typec.h diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 26566db..dc388a3d 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -351,6 +351,13 @@ config PHY_ROCKCHIP_DP help Enable this to support the Rockchip Display Port PHY. +config PHY_ROCKCHIP_TYPEC + tristate "Rockchip TYPEC PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip USB TYPEC PHY. + config PHY_ST_SPEAR1310_MIPHY tristate "ST SPEAR1310-MIPHY driver" select GENERIC_PHY diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 24596a9..91fa413 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o +obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c new file mode 100644 index 0000000..40be944 --- /dev/null +++ b/drivers/phy/phy-rockchip-typec.c @@ -0,0 +1,942 @@ +/* + * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd + * Author: Chris Zhong + * Kever Yang + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CMN_SSM_BANDGAP (0x21 << 2) +#define CMN_SSM_BIAS (0x22 << 2) +#define CMN_PLLSM0_PLLEN (0x29 << 2) +#define CMN_PLLSM0_PLLPRE (0x2a << 2) +#define CMN_PLLSM0_PLLVREF (0x2b << 2) +#define CMN_PLLSM0_PLLLOCK (0x2c << 2) +#define CMN_PLLSM1_PLLEN (0x31 << 2) +#define CMN_PLLSM1_PLLPRE (0x32 << 2) +#define CMN_PLLSM1_PLLVREF (0x33 << 2) +#define CMN_PLLSM1_PLLLOCK (0x34 << 2) +#define CMN_PLLSM1_USER_DEF_CTRL (0x37 << 2) +#define CMN_ICAL_OVRD (0xc1 << 2) +#define CMN_PLL0_VCOCAL_OVRD (0x83 << 2) +#define CMN_PLL0_VCOCAL_INIT (0x84 << 2) +#define CMN_PLL0_VCOCAL_ITER (0x85 << 2) +#define CMN_PLL0_LOCK_REFCNT_START (0x90 << 2) +#define CMN_PLL0_LOCK_PLLCNT_START (0x92 << 2) +#define CMN_PLL0_LOCK_PLLCNT_THR (0x93 << 2) +#define CMN_PLL0_INTDIV (0x94 << 2) +#define CMN_PLL0_FRACDIV (0x95 << 2) +#define CMN_PLL0_HIGH_THR (0x96 << 2) +#define CMN_PLL0_DSM_DIAG (0x97 << 2) +#define CMN_PLL0_SS_CTRL1 (0x98 << 2) +#define CMN_PLL0_SS_CTRL2 (0x99 << 2) +#define CMN_PLL1_VCOCAL_START (0xa1 << 2) +#define CMN_PLL1_VCOCAL_OVRD (0xa3 << 2) +#define CMN_PLL1_VCOCAL_INIT (0xa4 << 2) +#define CMN_PLL1_VCOCAL_ITER (0xa5 << 2) +#define CMN_PLL1_LOCK_REFCNT_START (0xb0 << 2) +#define CMN_PLL1_LOCK_PLLCNT_START (0xb2 << 2) +#define CMN_PLL1_LOCK_PLLCNT_THR (0xb3 << 2) +#define CMN_PLL1_INTDIV (0xb4 << 2) +#define CMN_PLL1_FRACDIV (0xb5 << 2) +#define CMN_PLL1_HIGH_THR (0xb6 << 2) +#define CMN_PLL1_DSM_DIAG (0xb7 << 2) +#define CMN_PLL1_SS_CTRL1 (0xb8 << 2) +#define CMN_PLL1_SS_CTRL2 (0xb9 << 2) +#define CMN_RXCAL_OVRD (0xd1 << 2) +#define CMN_TXPUCAL_CTRL (0xe0 << 2) +#define CMN_TXPUCAL_OVRD (0xe1 << 2) +#define CMN_TXPDCAL_OVRD (0xf1 << 2) +#define CMN_DIAG_PLL0_FBH_OVRD (0x1c0 << 2) +#define CMN_DIAG_PLL0_FBL_OVRD (0x1c1 << 2) +#define CMN_DIAG_PLL0_OVRD (0x1c2 << 2) +#define CMN_DIAG_PLL0_V2I_TUNE (0x1c5 << 2) +#define CMN_DIAG_PLL0_CP_TUNE (0x1c6 << 2) +#define CMN_DIAG_PLL0_LF_PROG (0x1c7 << 2) +#define CMN_DIAG_PLL1_FBH_OVRD (0x1d0 << 2) +#define CMN_DIAG_PLL1_FBL_OVRD (0x1d1 << 2) +#define CMN_DIAG_PLL1_OVRD (0x1d2 << 2) +#define CMN_DIAG_PLL1_V2I_TUNE (0x1d5 << 2) +#define CMN_DIAG_PLL1_CP_TUNE (0x1d6 << 2) +#define CMN_DIAG_PLL1_LF_PROG (0x1d7 << 2) +#define CMN_DIAG_PLL1_PTATIS_TUNE1 (0x1d8 << 2) +#define CMN_DIAG_PLL1_PTATIS_TUNE2 (0x1d9 << 2) +#define CMN_DIAG_PLL1_INCLK_CTRL (0x1da << 2) +#define CMN_DIAG_HSCLK_SEL (0x1e0 << 2) + +#define XCVR_PSM_RCTRL(n) ((0x4001 | (n << 9)) << 2) +#define XCVR_PSM_CAL_TMR(n) ((0x4002 | (n << 9)) << 2) +#define XCVR_PSM_A0IN_TMR(n) ((0x4003 | (n << 9)) << 2) +#define TX_TXCC_CAL_SCLR_MULT(n) ((0x4047 | (n << 9)) << 2) +#define TX_TXCC_CPOST_MULT_00(n) ((0x404c | (n << 9)) << 2) +#define TX_TXCC_CPOST_MULT_01(n) ((0x404d | (n << 9)) << 2) +#define TX_TXCC_CPOST_MULT_10(n) ((0x404e | (n << 9)) << 2) +#define TX_TXCC_CPOST_MULT_11(n) ((0x404f | (n << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_000(n) ((0x4050 | (n << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_001(n) ((0x4051 | (n << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_010(n) ((0x4052 | (n << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_011(n) ((0x4053 | (n << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_100(n) ((0x4054 | (n << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_101(n) ((0x4055 | (n << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_110(n) ((0x4056 | (n << 9)) << 2) +#define TX_TXCC_MGNFS_MULT_111(n) ((0x4057 | (n << 9)) << 2) +#define XCVR_DIAG_PLLDRC_CTRL(n) ((0x40e0 | (n << 9)) << 2) +#define XCVR_DIAG_BIDI_CTRL(n) ((0x40e8 | (n << 9)) << 2) +#define XCVR_DIAG_LANE_FCM_EN_MGN(n) ((0x40f2 | (n << 9)) << 2) +#define TX_PSC_A0(n) ((0x4100 | (n << 9)) << 2) +#define TX_PSC_A1(n) ((0x4101 | (n << 9)) << 2) +#define TX_PSC_A2(n) ((0x4102 | (n << 9)) << 2) +#define TX_PSC_A3(n) ((0x4103 | (n << 9)) << 2) +#define TX_RCVDET_CTRL(n) ((0x4120 | (n << 9)) << 2) +#define TX_RCVDET_EN_TMR(n) ((0x4122 | (n << 9)) << 2) +#define TX_RCVDET_ST_TMR(n) ((0x4123 | (n << 9)) << 2) +#define TX_DIAG_TX_DRV(n) ((0x41e1 | (n << 9)) << 2) +#define TX_DIAG_BGREF_PREDRV_DELAY (0x41e7 << 2) +#define TX_ANA_CTRL_REG_1 (0x5020 << 2) +#define TX_ANA_CTRL_REG_2 (0x5021 << 2) +#define TXDA_COEFF_CALC_CTRL (0x5022 << 2) +#define TX_DIG_CTRL_REG_2 (0x5024 << 2) +#define TXDA_CYA_AUXDA_CYA (0x5025 << 2) +#define TX_ANA_CTRL_REG_3 (0x5026 << 2) +#define TX_ANA_CTRL_REG_4 (0x5027 << 2) +#define TX_ANA_CTRL_REG_5 (0x5029 << 2) + +#define RX_PSC_A0(n) ((0x8000 | (n << 9)) << 2) +#define RX_PSC_A1(n) ((0x8001 | (n << 9)) << 2) +#define RX_PSC_A2(n) ((0x8002 | (n << 9)) << 2) +#define RX_PSC_A3(n) ((0x8003 | (n << 9)) << 2) +#define RX_PSC_CAL(n) ((0x8006 | (n << 9)) << 2) +#define RX_PSC_RDY(n) ((0x8007 | (n << 9)) << 2) +#define RX_IQPI_ILL_CAL_OVRD (0x8023 << 2) +#define RX_EPI_ILL_CAL_OVRD (0x8033 << 2) +#define RX_SDCAL0_OVRD (0x8041 << 2) +#define RX_SDCAL1_OVRD (0x8049 << 2) +#define RX_SLC_INIT (0x806d << 2) +#define RX_SLC_RUN (0x806e << 2) +#define RX_CDRLF_CNFG2 (0x8081 << 2) +#define RX_SIGDET_HL_FILT_TMR(n) ((0x8090 | (n << 9)) << 2) +#define RX_SLC_IOP0_OVRD (0x8101 << 2) +#define RX_SLC_IOP1_OVRD (0x8105 << 2) +#define RX_SLC_QOP0_OVRD (0x8109 << 2) +#define RX_SLC_QOP1_OVRD (0x810d << 2) +#define RX_SLC_EOP0_OVRD (0x8111 << 2) +#define RX_SLC_EOP1_OVRD (0x8115 << 2) +#define RX_SLC_ION0_OVRD (0x8119 << 2) +#define RX_SLC_ION1_OVRD (0x811d << 2) +#define RX_SLC_QON0_OVRD (0x8121 << 2) +#define RX_SLC_QON1_OVRD (0x8125 << 2) +#define RX_SLC_EON0_OVRD (0x8129 << 2) +#define RX_SLC_EON1_OVRD (0x812d << 2) +#define RX_SLC_IEP0_OVRD (0x8131 << 2) +#define RX_SLC_IEP1_OVRD (0x8135 << 2) +#define RX_SLC_QEP0_OVRD (0x8139 << 2) +#define RX_SLC_QEP1_OVRD (0x813d << 2) +#define RX_SLC_EEP0_OVRD (0x8141 << 2) +#define RX_SLC_EEP1_OVRD (0x8145 << 2) +#define RX_SLC_IEN0_OVRD (0x8149 << 2) +#define RX_SLC_IEN1_OVRD (0x814d << 2) +#define RX_SLC_QEN0_OVRD (0x8151 << 2) +#define RX_SLC_QEN1_OVRD (0x8155 << 2) +#define RX_SLC_EEN0_OVRD (0x8159 << 2) +#define RX_SLC_EEN1_OVRD (0x815d << 2) +#define RX_DIAG_SIGDET_TUNE(n) ((0x81dc | (n << 9)) << 2) +#define RX_DIAG_SC2C_DELAY (0x81e1 << 2) + +#define PMA_LANE_CFG (0xc000 << 2) +#define PIPE_CMN_CTRL1 (0xc001 << 2) +#define PIPE_CMN_CTRL2 (0xc002 << 2) +#define PIPE_COM_LOCK_CFG1 (0xc003 << 2) +#define PIPE_COM_LOCK_CFG2 (0xc004 << 2) +#define PIPE_RCV_DET_INH (0xc005 << 2) +#define DP_MODE_CTL (0xc008 << 2) +#define DP_CLK_CTL (0xc009 << 2) +#define STS (0xc00F << 2) +#define PHY_ISO_CMN_CTRL (0xc010 << 2) +#define PHY_DP_TX_CTL (0xc408 << 2) +#define PMA_CMN_CTRL1 (0xc800 << 2) +#define PHY_PMA_ISO_CMN_CTRL (0xc810 << 2) +#define PHY_ISOLATION_CTRL (0xc81f << 2) +#define PHY_PMA_ISO_XCVR_CTRL(n) ((0xcc11 | (n << 6)) << 2) +#define PHY_PMA_ISO_LINK_MODE(n) ((0xcc12 | (n << 6)) << 2) +#define PHY_PMA_ISO_PWRST_CTRL(n) ((0xcc13 | (n << 6)) << 2) +#define PHY_PMA_ISO_TX_DATA_LO(n) ((0xcc14 | (n << 6)) << 2) +#define PHY_PMA_ISO_TX_DATA_HI(n) ((0xcc15 | (n << 6)) << 2) +#define PHY_PMA_ISO_RX_DATA_LO(n) ((0xcc16 | (n << 6)) << 2) +#define PHY_PMA_ISO_RX_DATA_HI(n) ((0xcc17 | (n << 6)) << 2) +#define TX_BIST_CTRL(n) ((0x4140 | (n << 9)) << 2) +#define TX_BIST_UDDWR(n) ((0x4141 | (n << 9)) << 2) + +#define DP_PLL_CLOCK_ENABLE BIT(2) +#define DP_PLL_ENABLE BIT(0) +#define DP_PLL_DATA_RATE_RBR ((2 << 12) | (4 << 8)) +#define DP_PLL_DATA_RATE_HBR ((2 << 12) | (4 << 8)) +#define DP_PLL_DATA_RATE_HBR2 ((1 << 12) | (2 << 8)) + +#define GRF_SOC_CON26 0x6268 +#define UPHY_DP_SEL BIT(3) +#define UPHY_DP_SEL_MASK BIT(19) +#define DPTX_HDP_SEL (3 << 12) +#define DPTX_HDP_SEL_MASK (3 << 28) + +#define PHY_MODE_SET_TIMEOUT 1000000 + +#define MODE_DISCONNECT 0 +#define MODE_UFP_USB BIT(0) +#define MODE_DFP_USB BIT(1) +#define MODE_DFP_DP BIT(2) + +struct usb3phy_reg { + u32 offset; + u32 val_bit; + u32 write_enable; + u32 enable; + u32 disable; +}; + +struct rockchip_usb3phy_port_cfg { + u32 port_id; + struct usb3phy_reg typec_conn_dir; + struct usb3phy_reg usb3tousb2_en; + struct usb3phy_reg external_psm; + struct usb3phy_reg pipe_status; + struct usb3phy_reg dptx_hpd_sel; + struct usb3phy_reg uphy_dp_sel; +}; + +struct rockchip_typec_phy { + struct device *dev; + void __iomem *base; + struct extcon_dev *extcon; + struct phy *phy; + struct regmap *grf_regs; + struct clk *clk_core; + struct clk *clk_ref; + struct reset_control *phy_rst; + struct reset_control *pipe_rst; + struct reset_control *uphy_rst; + const struct rockchip_usb3phy_port_cfg *port_cfgs; + + /* to receive notifier from PD */ + struct notifier_block event_nb; + struct delayed_work event_wq; + + bool flip; + int mode; + int map; +}; + +struct phy_reg { + int value; + int addr; +}; + +struct phy_reg usb_pll_cfg[] = { + {0xf0, CMN_PLL0_VCOCAL_INIT}, + {0x18, CMN_PLL0_VCOCAL_ITER}, + {0xd0, CMN_PLL0_INTDIV}, + {0x4a4a, CMN_PLL0_FRACDIV}, + {0x34, CMN_PLL0_HIGH_THR}, + {0x1ee, CMN_PLL0_SS_CTRL1}, + {0x7f03, CMN_PLL0_SS_CTRL2}, + {0x20, CMN_PLL0_DSM_DIAG}, + {0, CMN_DIAG_PLL0_OVRD}, + {0, CMN_DIAG_PLL0_FBH_OVRD}, + {0, CMN_DIAG_PLL0_FBL_OVRD}, + {0x7, CMN_DIAG_PLL0_V2I_TUNE}, + {0x45, CMN_DIAG_PLL0_CP_TUNE}, + {0x8, CMN_DIAG_PLL0_LF_PROG}, +}; + +struct phy_reg dp_pll_cfg[] = { + {0xf0, CMN_PLL1_VCOCAL_INIT}, + {0x18, CMN_PLL1_VCOCAL_ITER}, + {0x30b9, CMN_PLL1_VCOCAL_START}, + {0x21c, CMN_PLL1_INTDIV}, + {0, CMN_PLL1_FRACDIV}, + {0x5, CMN_PLL1_HIGH_THR}, + {0x35, CMN_PLL1_SS_CTRL1}, + {0x7f1e, CMN_PLL1_SS_CTRL2}, + {0x20, CMN_PLL1_DSM_DIAG}, + {0, CMN_PLLSM1_USER_DEF_CTRL}, + {0, CMN_DIAG_PLL1_OVRD}, + {0, CMN_DIAG_PLL1_FBH_OVRD}, + {0, CMN_DIAG_PLL1_FBL_OVRD}, + {0x6, CMN_DIAG_PLL1_V2I_TUNE}, + {0x45, CMN_DIAG_PLL1_CP_TUNE}, + {0x8, CMN_DIAG_PLL1_LF_PROG}, + {0x100, CMN_DIAG_PLL1_PTATIS_TUNE1}, + {0x7, CMN_DIAG_PLL1_PTATIS_TUNE2}, + {0x4, CMN_DIAG_PLL1_INCLK_CTRL}, +}; + +static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy, + u32 num_lanes) +{ + u32 i; + + /* + * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent + * cmn_psm_clk_dig_div = 2, set the clk division to 2 + */ + writel(0x830, tcphy->base + PMA_CMN_CTRL1); + for (i = 0; i < num_lanes; i++) { + /* + * The following PHY configuration assumes a 24 MHz reference + * clocks. + */ + writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i)); + writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i)); + writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i)); + } +} + +static void tcphy_cfg_usb_pll(struct rockchip_typec_phy *tcphy) +{ + u32 rdata; + u32 i; + + /* + * Selects which PLL clock will be driven on the analog high speed + * clock 0: PLL 0 div 1. + */ + rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL); + writel(rdata & 0xfffc, tcphy->base + CMN_DIAG_HSCLK_SEL); + + /* load the configuration of PLL0 */ + for (i = 0; i < ARRAY_SIZE(usb_pll_cfg); i++) + writel(usb_pll_cfg[i].value, tcphy->base + usb_pll_cfg[i].addr); +} + +static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy) +{ + u32 rdata; + u32 i; + + /* set the default mode to RBR */ + writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR, + tcphy->base + DP_CLK_CTL); + + /* + * Selects which PLL clock will be driven on the analog high speed + * clock 1: PLL 1 div 2. + */ + rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL); + rdata = (rdata & 0xffcf) | 0x30; + writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL); + + /* load the configuration of PLL1 */ + for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++) + writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr); +} + +static void tcphy_tx_usb_cfg_lane(struct rockchip_typec_phy *tcphy, + u32 lane) +{ + writel(0x7799, tcphy->base + TX_PSC_A0(lane)); + writel(0x7798, tcphy->base + TX_PSC_A1(lane)); + writel(0x5098, tcphy->base + TX_PSC_A2(lane)); + writel(0x5098, tcphy->base + TX_PSC_A3(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane)); + writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane)); +} + +static void tcphy_rx_usb_cfg_lane(struct rockchip_typec_phy *tcphy, + u32 lane) +{ + writel(0xa6fd, tcphy->base + RX_PSC_A0(lane)); + writel(0xa6fd, tcphy->base + RX_PSC_A1(lane)); + writel(0xa410, tcphy->base + RX_PSC_A2(lane)); + writel(0x2410, tcphy->base + RX_PSC_A3(lane)); + writel(0x23ff, tcphy->base + RX_PSC_CAL(lane)); + writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane)); + writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane)); + writel(0x2010, tcphy->base + RX_PSC_RDY(lane)); + writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane)); +} + +static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, + u32 lane) +{ + u32 rdata; + + writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane)); + writel(0x6799, tcphy->base + TX_PSC_A0(lane)); + writel(0x6798, tcphy->base + TX_PSC_A1(lane)); + writel(0x98, tcphy->base + TX_PSC_A2(lane)); + writel(0x98, tcphy->base + TX_PSC_A3(lane)); + + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane)); + writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane)); + writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane)); + + writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane)); + writel(0x700, tcphy->base + TX_DIAG_TX_DRV(lane)); + + rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane)); + rdata = (rdata & 0x8fff) | 0x6000; + writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane)); +} + +static void tcphy_cfg_pin_assign(struct rockchip_typec_phy *tcphy) +{ + switch (tcphy->map) { + case PIN_MAP_A: + writel(0x19d5, tcphy->base + PMA_LANE_CFG); + break; + case PIN_MAP_B: + writel(0x1500, tcphy->base + PMA_LANE_CFG); + break; + case PIN_MAP_C: + case PIN_MAP_E: + writel(0x51d9, tcphy->base + PMA_LANE_CFG); + break; + case PIN_MAP_D: + case PIN_MAP_F: + writel(0x5100, tcphy->base + PMA_LANE_CFG); + break; + }; +} + +static void tcphy_cfg_lanes(struct rockchip_typec_phy *tcphy, + u32 link_cfg) +{ + u32 i; + + /* PMA lane configuration DP or USB3 */ + for (i = 0; i < 4; i++) { + if ((link_cfg >> i) & 0x1) { + tcphy_dp_cfg_lane(tcphy, i); + } else { + /* + * lan0 TX and lan1 RX for USB3 Normal direction + * lan3 TX and lan2 RX for USB3 Flip direction + */ + if (i == 0 || i == 3) + tcphy_tx_usb_cfg_lane(tcphy, i); + else + tcphy_rx_usb_cfg_lane(tcphy, i); + } + } +} + +static inline int property_enable(struct rockchip_typec_phy *tcphy, + const struct usb3phy_reg *reg, bool en) +{ + int mask = reg->enable << reg->write_enable; + int val = (en ? reg->enable : reg->disable) << reg->val_bit; + + return regmap_write(tcphy->grf_regs, reg->offset, val | mask); +} + +static void tcphy_cfg_flip_set(struct rockchip_typec_phy *tcphy) +{ + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; + + property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip); + + tcphy_cfg_24m(tcphy, 0x4); + + if (tcphy->mode == MODE_UFP_USB || + (tcphy->mode & MODE_DFP_USB)) + tcphy_cfg_usb_pll(tcphy); + + if (tcphy->mode & MODE_DFP_DP) + tcphy_cfg_dp_pll(tcphy); + + if (tcphy->mode == MODE_DFP_DP) + tcphy_cfg_lanes(tcphy, 0xf); + else if (tcphy->flip) + tcphy_cfg_lanes(tcphy, 0x3); + else + tcphy_cfg_lanes(tcphy, 0xc); +} + +static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy) +{ + int rdata, rdata2, val; + + /* disable txda_cal_latch_en for rewrite the calibration values */ + rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); + val = rdata & 0xdfff; + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + + /* + * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and + * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it + * works. + */ + rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2); + rdata = rdata & 0xffc0; + + rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL); + rdata2 = rdata2 & 0x3f; + + val = rdata | rdata2; + writel(val, tcphy->base + TX_DIG_CTRL_REG_2); + usleep_range(1000, 1050); + + /* + * Enable signal for latch that sample and holds calibration values. + * Activate this signal for 1 clock cycle to sample new calibration + * values. + */ + rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1); + val = rdata | 0x2000; + writel(val, tcphy->base + TX_ANA_CTRL_REG_1); + usleep_range(150, 200); + + /* set TX Voltage Level and TX Deemphasis to 0 */ + writel(0, tcphy->base + PHY_DP_TX_CTL); + /* re-enable decap */ + writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2); + writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2); + writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1); + writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1); + + writel(0, tcphy->base + TX_ANA_CTRL_REG_5); + + /* + * Programs txda_drv_ldo_prog[15:0], Sets driver LDO + * voltage 16'h1001 for DP-AUX-TX and RX + */ + writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4); + + /* re-enables Bandgap reference for LDO */ + writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1); + writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1); + + /* + * re-enables the transmitter pre-driver, driver data selection MUX, + * and receiver detect circuits. + */ + writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2); + writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2); + + /* + * Controls auxda_polarity, which selects the polarity of the xcvr + * 1'b1 : Reverses the polarity (If TYPEC, Pulls ups aux_p and pull + * down aux_m) + * 1'b0 : Normal polarity (if TYPE_C, pulls up aux_m and pulls down + * aux_p) + */ + if (tcphy->flip) + writel(0xa078, tcphy->base + TX_ANA_CTRL_REG_1); + else + writel(0xb078, tcphy->base + TX_ANA_CTRL_REG_1); + + writel(0, tcphy->base + TX_ANA_CTRL_REG_3); + writel(0, tcphy->base + TX_ANA_CTRL_REG_4); + writel(0, tcphy->base + TX_ANA_CTRL_REG_5); + + /* + * Controls low_power_swing_en, set the voltage swing of the driver + * to 400mv. The values below are peak to peak (differential) values. + */ + writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL); + writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA); + + /* Controls tx_high_z_tm_en */ + val = readl(tcphy->base + TX_DIG_CTRL_REG_2); + val |= BIT(15); + writel(val, tcphy->base + TX_DIG_CTRL_REG_2); +} + +static void tcphy_dp_hpd(struct rockchip_typec_phy *tcphy, + u8 mode) +{ + /* force hpd */ + if (mode) + regmap_write(tcphy->grf_regs, GRF_SOC_CON26, + DPTX_HDP_SEL_MASK | DPTX_HDP_SEL); + else + regmap_write(tcphy->grf_regs, GRF_SOC_CON26, + DPTX_HDP_SEL_MASK); +} + +static int tcphy_usb3_init(struct rockchip_typec_phy *tcphy) +{ + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; + const struct usb3phy_reg *reg = &cfg->pipe_status; + int timeout = 0; + int val; + + /* wait TCPHY for pipe ready */ + while (1) { + regmap_read(tcphy->grf_regs, reg->offset, &val); + if (!(val & (reg->enable << reg->val_bit))) + break; + + timeout++; + if (timeout > 1000) { + dev_err(tcphy->dev, "wait pipe ready timeout!\n"); + return -EBUSY; + } + usleep_range(10, 20); + } + + return 0; +} + +static int tcphy_dp_init(struct rockchip_typec_phy *tcphy) +{ + int ret, val; + + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, + val, val & BIT(6), 1000, PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + dev_err(tcphy->dev, "failed to wait TCPHY for DP ready\n"); + return -EBUSY; + } + + tcphy_dp_aux_calibration(tcphy); + + if (tcphy->mode & MODE_DFP_USB) + writel(0xc101, tcphy->base + DP_MODE_CTL); + else + writel(0x0101, tcphy->base + DP_MODE_CTL); + + ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL, + val, val & BIT(4), 1000, PHY_MODE_SET_TIMEOUT); + if (ret < 0) { + dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n"); + return -EBUSY; + } + + return 0; +} + +static int tcphy_phy_init(struct rockchip_typec_phy *tcphy) +{ + const struct rockchip_usb3phy_port_cfg *cfg = tcphy->port_cfgs; + + int timeout = 0; + int ret; + + ret = clk_prepare_enable(tcphy->clk_core); + if (ret) { + dev_err(tcphy->dev, "Failed to prepare_enable core clock\n"); + return ret; + } + + ret = clk_set_rate(tcphy->clk_core, 50000000); + if (ret) { + dev_err(tcphy->dev, "set type-c phy core clk rate failed\n"); + goto clk_ref_failed; + } + + ret = clk_prepare_enable(tcphy->clk_ref); + if (ret) { + dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n"); + goto clk_ref_failed; + } + + /* select external psm clock */ + property_enable(tcphy, &cfg->external_psm, 1); + property_enable(tcphy, &cfg->usb3tousb2_en, 0); + + reset_control_assert(tcphy->phy_rst); + reset_control_assert(tcphy->pipe_rst); + reset_control_assert(tcphy->uphy_rst); + + property_enable(tcphy, &cfg->uphy_dp_sel, cfg->port_id); + + reset_control_deassert(tcphy->uphy_rst); + + tcphy_cfg_flip_set(tcphy); + + tcphy_cfg_pin_assign(tcphy); + + if (tcphy->mode & MODE_DFP_DP) { + if (tcphy->mode & MODE_DFP_USB) + writel(0xc104, tcphy->base + DP_MODE_CTL); + else + writel(0x0104, tcphy->base + DP_MODE_CTL); + } + + reset_control_deassert(tcphy->phy_rst); + + while (!(readl(tcphy->base + PMA_CMN_CTRL1) & 1)) { + timeout++; + if (timeout > 1000) { + dev_err(tcphy->dev, "wait pma ready timeout!\n"); + goto timeout_failed; + } + usleep_range(10, 20); + } + + reset_control_deassert(tcphy->pipe_rst); + + return ret; + +timeout_failed: + clk_disable_unprepare(tcphy->clk_core); +clk_ref_failed: + clk_disable_unprepare(tcphy->clk_core); + return ret; +} + +static int tcphy_phy_deinit(struct rockchip_typec_phy *tcphy) +{ + clk_disable_unprepare(tcphy->clk_core); + clk_disable_unprepare(tcphy->clk_ref); + + return 0; +} + +static int rockchip_typec_phy_power_on(struct phy *_phy) +{ + return 0; +} + +static int rockchip_typec_phy_power_off(struct phy *_phy) +{ + return 0; +} + +static const struct phy_ops rockchip_tcphy_ops = { + .power_on = rockchip_typec_phy_power_on, + .power_off = rockchip_typec_phy_power_off, + .owner = THIS_MODULE, +}; + +static int tcphy_pd_event(struct notifier_block *nb, + unsigned long event, void *priv) +{ + struct rockchip_typec_phy *tcphy; + struct extcon_dev *edev = (struct extcon_dev *)priv; + int value = edev->state; + int mode; + u8 is_plugged, dfp; + + tcphy = container_of(nb, struct rockchip_typec_phy, event_nb); + + is_plugged = GET_PLUGGED(value); + tcphy->flip = GET_FLIP(value); + dfp = GET_DFP(value); + tcphy->map = GET_PIN_MAP(value); + + if (is_plugged) { + if (!dfp) + mode = MODE_UFP_USB; + else if (tcphy->map & (PIN_MAP_B | PIN_MAP_D | PIN_MAP_F)) + mode = MODE_DFP_USB | MODE_DFP_DP; + else if (tcphy->map & (PIN_MAP_A | PIN_MAP_C | PIN_MAP_E)) + mode = MODE_DFP_DP; + else + mode = MODE_DFP_USB; + } else { + mode = MODE_DISCONNECT; + } + + if (tcphy->mode != mode) { + tcphy->mode = mode; + schedule_delayed_work_on(0, &tcphy->event_wq, 0); + } + + return 0; +} + +static void tcphy_event_wq(struct work_struct *work) +{ + struct rockchip_typec_phy *tcphy; + + tcphy = container_of(work, struct rockchip_typec_phy, event_wq.work); + + if (tcphy->mode == MODE_DISCONNECT) { + tcphy_phy_deinit(tcphy); + tcphy_dp_hpd(tcphy, 0); + } else { + tcphy_phy_init(tcphy); + if (tcphy->mode & (MODE_UFP_USB | MODE_DFP_USB)) + tcphy_usb3_init(tcphy); + + if (tcphy->mode & MODE_DFP_DP) { + tcphy_dp_init(tcphy); + tcphy_dp_hpd(tcphy, 1); + } + } +} + +static const struct of_device_id rockchip_typec_phy_dt_ids[]; + +static int rockchip_typec_phy_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct device *dev = &pdev->dev; + struct rockchip_typec_phy *tcphy; + struct resource *res; + struct phy_provider *phy_provider; + struct rockchip_usb3phy_port_cfg *cfg; + int ret; + + tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL); + if (!tcphy) + return -ENOMEM; + + match = of_match_node(rockchip_typec_phy_dt_ids, dev->of_node); + cfg = (struct rockchip_usb3phy_port_cfg *)match->data; + + tcphy->port_cfgs = cfg; + tcphy->dev = dev; + platform_set_drvdata(pdev, tcphy); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + tcphy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(tcphy->base)) { + dev_err(dev, "failed to remap phy regs\n"); + return PTR_ERR(tcphy->base); + } + + tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node, + "rockchip,grf"); + if (IS_ERR(tcphy->grf_regs)) { + dev_err(dev, "could not find grf dt node\n"); + return PTR_ERR(tcphy->grf_regs); + } + + tcphy->clk_core = devm_clk_get(dev, "tcpdcore"); + if (IS_ERR(tcphy->clk_core)) { + dev_err(dev, "could not get uphy core clock\n"); + return PTR_ERR(tcphy->clk_core); + } + + tcphy->clk_ref = devm_clk_get(dev, "tcpdphy_ref"); + if (IS_ERR(tcphy->clk_ref)) { + dev_err(dev, "could not get uphy ref clock\n"); + return PTR_ERR(tcphy->clk_ref); + } + + tcphy->phy_rst = devm_reset_control_get(dev, "tcphy"); + if (IS_ERR(tcphy->phy_rst)) { + dev_err(dev, "no phy_rst reset control found\n"); + return PTR_ERR(tcphy->phy_rst); + } + + tcphy->pipe_rst = devm_reset_control_get(dev, "tcphy_pipe"); + if (IS_ERR(tcphy->pipe_rst)) { + dev_err(dev, "no pipe_rst reset control found\n"); + return PTR_ERR(tcphy->pipe_rst); + } + + tcphy->uphy_rst = devm_reset_control_get(dev, "uphy_tcphy"); + if (IS_ERR(tcphy->uphy_rst)) { + dev_err(dev, "no uphy_rst reset control found\n"); + return PTR_ERR(tcphy->uphy_rst); + } + + tcphy->mode = MODE_DISCONNECT; + + tcphy->phy = devm_phy_create(dev, NULL, &rockchip_tcphy_ops); + + phy_set_drvdata(tcphy->phy, tcphy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + tcphy->extcon = extcon_get_edev_by_phandle(dev, 0); + if (IS_ERR(tcphy->extcon)) { + if (PTR_ERR(tcphy->extcon) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_err(dev, "Invalid or missing extcon\n"); + return PTR_ERR(tcphy->extcon); + } + + tcphy->event_nb.notifier_call = tcphy_pd_event; + INIT_DELAYED_WORK(&tcphy->event_wq, tcphy_event_wq); + ret = extcon_register_notifier(tcphy->extcon, EXTCON_USB, + &tcphy->event_nb); + if (ret) { + dev_err(dev, "regitster notifer failed\n"); + return ret; + } + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static int rockchip_typec_phy_remove(struct platform_device *pdev) +{ + struct rockchip_typec_phy *tcphy = platform_get_drvdata(pdev); + + extcon_unregister_notifier(tcphy->extcon, EXTCON_USB, + &tcphy->event_nb); + + return 0; +} + +static const struct rockchip_usb3phy_port_cfg rk3399_tcphy0 = { + .port_id = 0, + .typec_conn_dir = {0xe580, 0, 16, 1, 0}, + .usb3tousb2_en = {0xe580, 3, 19, 1, 0}, + .external_psm = {0xe588, 14, 30, 1, 0}, + .pipe_status = {0xe5c0, 0, 0, 1, 0}, + .dptx_hpd_sel = {0x6268, 12, 28, 3, 0}, + .uphy_dp_sel = {0x6268, 3, 19, 1, 0}, +}; + +static const struct rockchip_usb3phy_port_cfg rk3399_tcphy1 = { + .port_id = 1, + .typec_conn_dir = {0xe58c, 0, 16, 1, 0}, + .usb3tousb2_en = {0xe58c, 3, 19, 1, 0}, + .external_psm = {0xe594, 14, 30, 1, 0}, + .pipe_status = {0xe5c0, 16, 16, 1, 0}, + .dptx_hpd_sel = {0x6268, 12, 28, 3, 0}, + .uphy_dp_sel = {0x6268, 3, 19, 1, 0}, +}; + +static const struct of_device_id rockchip_typec_phy_dt_ids[] = { + { .compatible = "rockchip,rk3399-typec-phy0", .data = &rk3399_tcphy0 }, + { .compatible = "rockchip,rk3399-typec-phy1", .data = &rk3399_tcphy1 }, + {} +}; + +MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids); + +static struct platform_driver rockchip_typec_phy_driver = { + .probe = rockchip_typec_phy_probe, + .remove = rockchip_typec_phy_remove, + .driver = { + .name = "rockchip-typec-phy", + .of_match_table = rockchip_typec_phy_dt_ids, + }, +}; + +module_platform_driver(rockchip_typec_phy_driver); + +MODULE_AUTHOR("Chris Zhong "); +MODULE_AUTHOR("Kever Yang "); +MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/phy/phy-rockchip-typec.h b/include/linux/phy/phy-rockchip-typec.h new file mode 100644 index 0000000..acdd8cb --- /dev/null +++ b/include/linux/phy/phy-rockchip-typec.h @@ -0,0 +1,20 @@ +#ifndef PHY_ROCKCHIP_TYPEC_H_ +#define PHY_ROCKCHIP_TYPEC_H_ + +#define PIN_MAP_A BIT(0) +#define PIN_MAP_B BIT(1) +#define PIN_MAP_C BIT(2) +#define PIN_MAP_D BIT(3) +#define PIN_MAP_E BIT(4) +#define PIN_MAP_F BIT(5) + +#define SET_PIN_MAP(x) (((x) & 0xff) << 24) +#define SET_FLIP(x) (((x) & 0xff) << 16) +#define SET_DFP(x) (((x) & 0xff) << 8) +#define SET_PLUGGED(x) ((x) & 0xff) +#define GET_PIN_MAP(x) (((x) >> 24) & 0xff) +#define GET_FLIP(x) (((x) >> 16) & 0xff) +#define GET_DFP(x) (((x) >> 8) & 0xff) +#define GET_PLUGGED(x) ((x) & 0xff) + +#endif