diff mbox

[v2,12/13] regulator: pwm: Support extra continuous mode cases

Message ID 1465403688-17098-13-git-send-email-boris.brezillon@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Boris BREZILLON June 8, 2016, 4:34 p.m. UTC
The continuous mode allows one to declare a PWM regulator without having
to declare the voltage <-> dutycycle association table. It works fine as
long as your voltage(dutycycle) function is linear, but also has the
following constraints:

- dutycycle for min_uV = 0%
- dutycycle for max_uV = 100%
- dutycycle for min_uV < dutycycle for max_uV

While the linearity constraint is acceptable for now, we sometimes need to
restrict of the PWM range (to limit the maximum/minimum voltage for
example) or have a min_uV_dutycycle > max_uV_dutycycle (this could be
tweaked with PWM polarity, but not all PWMs support inverted polarity).

Add the pwm-dutycycle-range and pwm-dutycycle-unit DT properties to define
such constraints. If those properties are not defined, the PWM regulator
use the default pwm-dutycycle-range = <0 100> and
pwm-dutycycle-unit = <100> values (existing behavior).

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
---
 drivers/regulator/pwm-regulator.c | 92 +++++++++++++++++++++++++++++++++++----
 1 file changed, 83 insertions(+), 9 deletions(-)
diff mbox

Patch

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index c39ecd1..3e8680a 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -21,6 +21,12 @@ 
 #include <linux/of_device.h>
 #include <linux/pwm.h>
 
+struct pwm_continuous_reg_data {
+	unsigned int min_uV_dutycycle;
+	unsigned int max_uV_dutycycle;
+	unsigned int dutycycle_unit;
+};
+
 struct pwm_regulator_data {
 	/*  Shared */
 	struct pwm_device *pwm;
@@ -28,6 +34,9 @@  struct pwm_regulator_data {
 	/* Voltage table */
 	struct pwm_voltages *duty_cycle_table;
 
+	/* Continuous mode info */
+	struct pwm_continuous_reg_data continuous;
+
 	/* regulator descriptor */
 	struct regulator_desc desc;
 
@@ -132,31 +141,79 @@  static int pwm_regulator_is_enabled(struct regulator_dev *dev)
 static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
+	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
+	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
 	int min_uV = rdev->constraints->min_uV;
-	int diff = rdev->constraints->max_uV - min_uV;
+	int max_uV = rdev->constraints->max_uV;
+	int diff_uV = max_uV - min_uV;
 	struct pwm_state pstate;
+	unsigned int diff_duty;
+	unsigned int voltage;
 
 	pwm_get_state(drvdata->pwm, &pstate);
 
-	return min_uV + pwm_get_relative_duty_cycle(&pstate, diff);
+	voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
+
+	/*
+	 * The dutycycle for the min_uV voltage might be greater than the
+	 * one for the max_uV. This is happening when the user needs an
+	 * inversed polarity, but the PWM device does not support inversing
+	 * it in hardware.
+	 */
+	if (max_uV_duty < min_uV_duty) {
+		voltage = min_uV_duty - voltage;
+		diff_duty = min_uV_duty - max_uV_duty;
+	} else {
+		voltage = voltage - min_uV_duty;
+		diff_duty = max_uV_duty - min_uV_duty;
+	}
+
+	voltage = DIV_ROUND_CLOSEST_ULL((u64)voltage * diff_uV, diff_duty);
+
+	return voltage + min_uV;
 }
 
 static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
-					int min_uV, int max_uV,
-					unsigned *selector)
+				     int req_min_uV, int req_max_uV,
+				     unsigned int *selector)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
+	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
+	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
+	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
 	unsigned int ramp_delay = rdev->constraints->ramp_delay;
-	unsigned int req_diff = min_uV - rdev->constraints->min_uV;
+	int min_uV = rdev->constraints->min_uV;
+	int max_uV = rdev->constraints->max_uV;
+	int diff_uV = max_uV - min_uV;
 	struct pwm_state pstate;
-	unsigned int diff;
+	unsigned int diff_duty;
+	unsigned int dutycycle;
 	int ret;
 
 	pwm_prepare_new_state(drvdata->pwm, &pstate);
-	diff = rdev->constraints->max_uV - rdev->constraints->min_uV;
 
-	/* We pass diff as the scale to get a uV precision. */
-	pwm_set_relative_duty_cycle(&pstate, req_diff, diff);
+	/*
+	 * The dutycycle for the min_uV voltage might be greater than the
+	 * one for the max_uV. This is happening when the user needs an
+	 * inversed polarity, but the PWM device does not support inversing
+	 * it in hardware.
+	 */
+	if (max_uV_duty < min_uV_duty)
+		diff_duty = min_uV_duty - max_uV_duty;
+	else
+		diff_duty = max_uV_duty - min_uV_duty;
+
+	dutycycle = DIV_ROUND_CLOSEST_ULL((u64)(req_min_uV - min_uV) *
+					  diff_duty,
+					  diff_uV);
+
+	if (max_uV_duty < min_uV_duty)
+		dutycycle = min_uV_duty - dutycycle;
+	else
+		dutycycle = min_uV_duty + dutycycle;
+
+	pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit);
 
 	ret = pwm_apply_state(drvdata->pwm, &pstate);
 	if (ret) {
@@ -237,11 +294,28 @@  static int pwm_regulator_init_table(struct platform_device *pdev,
 static int pwm_regulator_init_continuous(struct platform_device *pdev,
 					 struct pwm_regulator_data *drvdata)
 {
+	u32 dutycycle_range[2] = { 0, 100 };
+	u32 dutycycle_unit = 100;
+
 	memcpy(&drvdata->ops, &pwm_regulator_voltage_continuous_ops,
 	       sizeof(drvdata->ops));
 	drvdata->desc.ops = &drvdata->ops;
 	drvdata->desc.continuous_voltage_range = true;
 
+	of_property_read_u32_array(pdev->dev.of_node,
+				   "pwm-dutycycle-range",
+				   dutycycle_range, 2);
+	of_property_read_u32(pdev->dev.of_node, "pwm-dutycycle-unit",
+			     &dutycycle_unit);
+
+	if (dutycycle_range[0] > dutycycle_unit ||
+	    dutycycle_range[1] > dutycycle_unit)
+		return -EINVAL;
+
+	drvdata->continuous.dutycycle_unit = dutycycle_unit;
+	drvdata->continuous.min_uV_dutycycle = dutycycle_range[0];
+	drvdata->continuous.max_uV_dutycycle = dutycycle_range[1];
+
 	return 0;
 }