diff mbox

[v8,1/2] drm/bridge: Add sii902x driver

Message ID 1465890142-14464-1-git-send-email-boris.brezillon@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Boris BREZILLON June 14, 2016, 7:42 a.m. UTC
Add basic support for the sii902x RGB -> HDMI bridge.
This driver does not support audio output yet.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
Changes in v8:
- remove useless headers inclusion
- fix macro names (s/SIL/SII)
- drop unneeded hotplug_work field from struct sii902x
- drop drm_connector_unregister() call in the ->destroy() method
- add a timeout when polling a register value

Changes in v6:
- use HDMI_INFOFRAME_SIZE(AVI)
- fix reset_gpio initialization
- reduce the reset time based on Ming feedback

Changes in v5:
- drop the best_encoder() implementation

Changes in v4:
- make reset GPIO optional
- only support attaching to DRM devices supporting atomic updates

Changes in v3:
- fix get_modes() implementation to avoid turning the screen in power
  save mode
- rename the driver (sil902x -> sii902x)

Changes in v2:
- fix errors reported by the kbuild robot

fixup! drm: bridge: Add sii902x driver
---
 drivers/gpu/drm/bridge/Kconfig   |   8 +
 drivers/gpu/drm/bridge/Makefile  |   1 +
 drivers/gpu/drm/bridge/sii902x.c | 467 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 476 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/sii902x.c

Comments

Archit Taneja June 15, 2016, 11:25 a.m. UTC | #1
On 06/14/2016 01:12 PM, Boris Brezillon wrote:
> Add basic support for the sii902x RGB -> HDMI bridge.
> This driver does not support audio output yet.
>

Thanks for incorporating the comments.

Acked-by: Archit Taneja <architt@codeaurora.org>

> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
> Changes in v8:
> - remove useless headers inclusion
> - fix macro names (s/SIL/SII)
> - drop unneeded hotplug_work field from struct sii902x
> - drop drm_connector_unregister() call in the ->destroy() method
> - add a timeout when polling a register value
>
> Changes in v6:
> - use HDMI_INFOFRAME_SIZE(AVI)
> - fix reset_gpio initialization
> - reduce the reset time based on Ming feedback
>
> Changes in v5:
> - drop the best_encoder() implementation
>
> Changes in v4:
> - make reset GPIO optional
> - only support attaching to DRM devices supporting atomic updates
>
> Changes in v3:
> - fix get_modes() implementation to avoid turning the screen in power
>    save mode
> - rename the driver (sil902x -> sii902x)
>
> Changes in v2:
> - fix errors reported by the kbuild robot
>
> fixup! drm: bridge: Add sii902x driver
> ---
>   drivers/gpu/drm/bridge/Kconfig   |   8 +
>   drivers/gpu/drm/bridge/Makefile  |   1 +
>   drivers/gpu/drm/bridge/sii902x.c | 467 +++++++++++++++++++++++++++++++++++++++
>   3 files changed, 476 insertions(+)
>   create mode 100644 drivers/gpu/drm/bridge/sii902x.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 8f7423f..a1419214 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -50,6 +50,14 @@ config DRM_PARADE_PS8622
>   	---help---
>   	  Parade eDP-LVDS bridge chip driver.
>
> +config DRM_SII902X
> +	tristate "Silicon Image sii902x RGB/HDMI bridge"
> +	depends on OF
> +	select DRM_KMS_HELPER
> +	select REGMAP_I2C
> +	---help---
> +	  Silicon Image sii902x bridge chip driver.
> +
>   source "drivers/gpu/drm/bridge/analogix/Kconfig"
>
>   endmenu
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 96b13b3..bfec9f8 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -5,4 +5,5 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
>   obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
>   obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
>   obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> +obj-$(CONFIG_DRM_SII902X) += sii902x.o
>   obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
> new file mode 100644
> index 0000000..9126d03
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/sii902x.c
> @@ -0,0 +1,467 @@
> +/*
> + * Copyright (C) 2016 Atmel
> + *		      Bo Shen <voice.shen@atmel.com>
> + *
> + * Authors:	      Bo Shen <voice.shen@atmel.com>
> + *		      Boris Brezillon <boris.brezillon@free-electrons.com>
> + *		      Wu, Songjun <Songjun.Wu@atmel.com>
> + *
> + *
> + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_edid.h>
> +
> +#define SII902X_TPI_VIDEO_DATA			0x0
> +
> +#define SII902X_TPI_PIXEL_REPETITION		0x8
> +#define SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT     BIT(5)
> +#define SII902X_TPI_AVI_PIXEL_REP_RISING_EDGE   BIT(4)
> +#define SII902X_TPI_AVI_PIXEL_REP_4X		3
> +#define SII902X_TPI_AVI_PIXEL_REP_2X		1
> +#define SII902X_TPI_AVI_PIXEL_REP_NONE		0
> +#define SII902X_TPI_CLK_RATIO_HALF		(0 << 6)
> +#define SII902X_TPI_CLK_RATIO_1X		(1 << 6)
> +#define SII902X_TPI_CLK_RATIO_2X		(2 << 6)
> +#define SII902X_TPI_CLK_RATIO_4X		(3 << 6)
> +
> +#define SII902X_TPI_AVI_IN_FORMAT		0x9
> +#define SII902X_TPI_AVI_INPUT_BITMODE_12BIT	BIT(7)
> +#define SII902X_TPI_AVI_INPUT_DITHER		BIT(6)
> +#define SII902X_TPI_AVI_INPUT_RANGE_LIMITED	(2 << 2)
> +#define SII902X_TPI_AVI_INPUT_RANGE_FULL	(1 << 2)
> +#define SII902X_TPI_AVI_INPUT_RANGE_AUTO	(0 << 2)
> +#define SII902X_TPI_AVI_INPUT_COLORSPACE_BLACK	(3 << 0)
> +#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV422	(2 << 0)
> +#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV444	(1 << 0)
> +#define SII902X_TPI_AVI_INPUT_COLORSPACE_RGB	(0 << 0)
> +
> +#define SII902X_TPI_AVI_INFOFRAME		0x0c
> +
> +#define SII902X_SYS_CTRL_DATA			0x1a
> +#define SII902X_SYS_CTRL_PWR_DWN		BIT(4)
> +#define SII902X_SYS_CTRL_AV_MUTE		BIT(3)
> +#define SII902X_SYS_CTRL_DDC_BUS_REQ		BIT(2)
> +#define SII902X_SYS_CTRL_DDC_BUS_GRTD		BIT(1)
> +#define SII902X_SYS_CTRL_OUTPUT_MODE		BIT(0)
> +#define SII902X_SYS_CTRL_OUTPUT_HDMI		1
> +#define SII902X_SYS_CTRL_OUTPUT_DVI		0
> +
> +#define SII902X_REG_CHIPID(n)			(0x1b + (n))
> +
> +#define SII902X_PWR_STATE_CTRL			0x1e
> +#define SII902X_AVI_POWER_STATE_MSK		GENMASK(1, 0)
> +#define SII902X_AVI_POWER_STATE_D(l)		((l) & SII902X_AVI_POWER_STATE_MSK)
> +
> +#define SII902X_INT_ENABLE			0x3c
> +#define SII902X_INT_STATUS			0x3d
> +#define SII902X_HOTPLUG_EVENT			BIT(0)
> +#define SII902X_PLUGGED_STATUS			BIT(2)
> +
> +#define SII902X_REG_TPI_RQB			0xc7
> +
> +#define SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS	500
> +
> +struct sii902x {
> +	struct i2c_client *i2c;
> +	struct regmap *regmap;
> +	struct drm_bridge bridge;
> +	struct drm_connector connector;
> +	struct gpio_desc *reset_gpio;
> +};
> +
> +static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge)
> +{
> +	return container_of(bridge, struct sii902x, bridge);
> +}
> +
> +static inline struct sii902x *connector_to_sii902x(struct drm_connector *con)
> +{
> +	return container_of(con, struct sii902x, connector);
> +}
> +
> +static void sii902x_reset(struct sii902x *sii902x)
> +{
> +	if (!sii902x->reset_gpio)
> +		return;
> +
> +	gpiod_set_value(sii902x->reset_gpio, 1);
> +
> +	/* The datasheet says treset-min = 100us. Make it 150us to be sure. */
> +	usleep_range(150, 200);
> +
> +	gpiod_set_value(sii902x->reset_gpio, 0);
> +}
> +
> +static enum drm_connector_status
> +sii902x_connector_detect(struct drm_connector *connector, bool force)
> +{
> +	struct sii902x *sii902x = connector_to_sii902x(connector);
> +	unsigned int status;
> +
> +	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
> +
> +	return (status & SII902X_PLUGGED_STATUS) ?
> +	       connector_status_connected : connector_status_disconnected;
> +}
> +
> +static const struct drm_connector_funcs sii902x_connector_funcs = {
> +	.dpms = drm_atomic_helper_connector_dpms,
> +	.detect = sii902x_connector_detect,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = drm_connector_cleanup,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int sii902x_get_modes(struct drm_connector *connector)
> +{
> +	struct sii902x *sii902x = connector_to_sii902x(connector);
> +	struct regmap *regmap = sii902x->regmap;
> +	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
> +	unsigned long timeout;
> +	unsigned int status;
> +	struct edid *edid;
> +	int num = 0;
> +	int ret;
> +
> +	ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA,
> +				 SII902X_SYS_CTRL_DDC_BUS_REQ,
> +				 SII902X_SYS_CTRL_DDC_BUS_REQ);
> +	if (ret)
> +		return ret;
> +
> +	timeout = jiffies +
> +		  msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
> +	do {
> +		ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
> +		if (ret)
> +			return ret;
> +	} while (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
> +		 time_before(jiffies, timeout));
> +
> +	if (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
> +		dev_err(&sii902x->i2c->dev, "failed to acquire the i2c bus");
> +		return -ETIMEDOUT;
> +	}
> +
> +	ret = regmap_write(regmap, SII902X_SYS_CTRL_DATA, status);
> +	if (ret)
> +		return ret;
> +
> +	edid = drm_get_edid(connector, sii902x->i2c->adapter);
> +	drm_mode_connector_update_edid_property(connector, edid);
> +	if (edid) {
> +		num = drm_add_edid_modes(connector, edid);
> +		kfree(edid);
> +	}
> +
> +	ret = drm_display_info_set_bus_formats(&connector->display_info,
> +					       &bus_format, 1);
> +	if (ret)
> +		return ret;
> +
> +	ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
> +	if (ret)
> +		return ret;
> +
> +	ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA,
> +				 SII902X_SYS_CTRL_DDC_BUS_REQ |
> +				 SII902X_SYS_CTRL_DDC_BUS_GRTD, 0);
> +	if (ret)
> +		return ret;
> +
> +	timeout = jiffies +
> +		  msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
> +	do {
> +		ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
> +		if (ret)
> +			return ret;
> +	} while (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
> +			   SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
> +		 time_before(jiffies, timeout));
> +
> +	if (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
> +		      SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
> +		dev_err(&sii902x->i2c->dev, "failed to release the i2c bus");
> +		return -ETIMEDOUT;
> +	}
> +
> +	return num;
> +}
> +
> +static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,
> +					       struct drm_display_mode *mode)
> +{
> +	/* TODO: check mode */
> +
> +	return MODE_OK;
> +}
> +
> +static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {
> +	.get_modes = sii902x_get_modes,
> +	.mode_valid = sii902x_mode_valid,
> +};
> +
> +static void sii902x_bridge_disable(struct drm_bridge *bridge)
> +{
> +	struct sii902x *sii902x = bridge_to_sii902x(bridge);
> +
> +	regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
> +			   SII902X_SYS_CTRL_PWR_DWN,
> +			   SII902X_SYS_CTRL_PWR_DWN);
> +}
> +
> +static void sii902x_bridge_enable(struct drm_bridge *bridge)
> +{
> +	struct sii902x *sii902x = bridge_to_sii902x(bridge);
> +
> +	regmap_update_bits(sii902x->regmap, SII902X_PWR_STATE_CTRL,
> +			   SII902X_AVI_POWER_STATE_MSK,
> +			   SII902X_AVI_POWER_STATE_D(0));
> +	regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
> +			   SII902X_SYS_CTRL_PWR_DWN, 0);
> +}
> +
> +static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
> +				    struct drm_display_mode *mode,
> +				    struct drm_display_mode *adj)
> +{
> +	struct sii902x *sii902x = bridge_to_sii902x(bridge);
> +	struct regmap *regmap = sii902x->regmap;
> +	u8 buf[HDMI_INFOFRAME_SIZE(AVI)];
> +	struct hdmi_avi_infoframe frame;
> +	int ret;
> +
> +	buf[0] = adj->clock;
> +	buf[1] = adj->clock >> 8;
> +	buf[2] = adj->vrefresh;
> +	buf[3] = 0x00;
> +	buf[4] = adj->hdisplay;
> +	buf[5] = adj->hdisplay >> 8;
> +	buf[6] = adj->vdisplay;
> +	buf[7] = adj->vdisplay >> 8;
> +	buf[8] = SII902X_TPI_CLK_RATIO_1X | SII902X_TPI_AVI_PIXEL_REP_NONE |
> +		 SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT;
> +	buf[9] = SII902X_TPI_AVI_INPUT_RANGE_AUTO |
> +		 SII902X_TPI_AVI_INPUT_COLORSPACE_RGB;
> +
> +	ret = regmap_bulk_write(regmap, SII902X_TPI_VIDEO_DATA, buf, 10);
> +	if (ret)
> +		return;
> +
> +	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj);
> +	if (ret < 0) {
> +		DRM_ERROR("couldn't fill AVI infoframe\n");
> +		return;
> +	}
> +
> +	ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf));
> +	if (ret < 0) {
> +		DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
> +		return;
> +	}
> +
> +	/* Do not send the infoframe header, but keep the CRC field. */
> +	regmap_bulk_write(regmap, SII902X_TPI_AVI_INFOFRAME,
> +			  buf + HDMI_INFOFRAME_HEADER_SIZE - 1,
> +			  HDMI_AVI_INFOFRAME_SIZE + 1);
> +}
> +
> +static int sii902x_bridge_attach(struct drm_bridge *bridge)
> +{
> +	struct sii902x *sii902x = bridge_to_sii902x(bridge);
> +	struct drm_device *drm = bridge->dev;
> +	int ret;
> +
> +	drm_connector_helper_add(&sii902x->connector,
> +				 &sii902x_connector_helper_funcs);
> +
> +	if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) {
> +		dev_err(&sii902x->i2c->dev,
> +			"sii902x driver is only compatible with DRM devices supporting atomic updates");
> +		return -ENOTSUPP;
> +	}
> +
> +	ret = drm_connector_init(drm, &sii902x->connector,
> +				 &sii902x_connector_funcs,
> +				 DRM_MODE_CONNECTOR_HDMIA);
> +	if (ret)
> +		return ret;
> +
> +	if (sii902x->i2c->irq > 0)
> +		sii902x->connector.polled = DRM_CONNECTOR_POLL_HPD;
> +	else
> +		sii902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
> +
> +	drm_mode_connector_attach_encoder(&sii902x->connector, bridge->encoder);
> +
> +	return 0;
> +}
> +
> +static const struct drm_bridge_funcs sii902x_bridge_funcs = {
> +	.attach = sii902x_bridge_attach,
> +	.mode_set = sii902x_bridge_mode_set,
> +	.disable = sii902x_bridge_disable,
> +	.enable = sii902x_bridge_enable,
> +};
> +
> +static const struct regmap_range sii902x_volatile_ranges[] = {
> +	{ .range_min = 0, .range_max = 0xff },
> +};
> +
> +static const struct regmap_access_table sii902x_volatile_table = {
> +	.yes_ranges = sii902x_volatile_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(sii902x_volatile_ranges),
> +};
> +
> +static const struct regmap_config sii902x_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.volatile_table = &sii902x_volatile_table,
> +	.cache_type = REGCACHE_NONE,
> +};
> +
> +static irqreturn_t sii902x_interrupt(int irq, void *data)
> +{
> +	struct sii902x *sii902x = data;
> +	unsigned int status = 0;
> +
> +	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
> +	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
> +
> +	if ((status & SII902X_HOTPLUG_EVENT) && sii902x->bridge.dev)
> +		drm_helper_hpd_irq_event(sii902x->bridge.dev);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int sii902x_probe(struct i2c_client *client,
> +			 const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	unsigned int status = 0;
> +	struct sii902x *sii902x;
> +	u8 chipid[4];
> +	int ret;
> +
> +	sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL);
> +	if (!sii902x)
> +		return -ENOMEM;
> +
> +	sii902x->i2c = client;
> +	sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config);
> +	if (IS_ERR(sii902x->regmap))
> +		return PTR_ERR(sii902x->regmap);
> +
> +	sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
> +						      GPIOD_OUT_LOW);
> +	if (IS_ERR(sii902x->reset_gpio)) {
> +		dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n",
> +			PTR_ERR(sii902x->reset_gpio));
> +		return PTR_ERR(sii902x->reset_gpio);
> +	}
> +
> +	sii902x_reset(sii902x);
> +
> +	ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
> +	if (ret)
> +		return ret;
> +
> +	ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0),
> +			       &chipid, 4);
> +	if (ret) {
> +		dev_err(dev, "regmap_read failed %d\n", ret);
> +		return ret;
> +	}
> +
> +	if (chipid[0] != 0xb0) {
> +		dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n",
> +			chipid[0]);
> +		return -EINVAL;
> +	}
> +
> +	/* Clear all pending interrupts */
> +	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
> +	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
> +
> +	if (client->irq > 0) {
> +		regmap_write(sii902x->regmap, SII902X_INT_ENABLE,
> +			     SII902X_HOTPLUG_EVENT);
> +
> +		ret = devm_request_threaded_irq(dev, client->irq, NULL,
> +						sii902x_interrupt,
> +						IRQF_ONESHOT, dev_name(dev),
> +						sii902x);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	sii902x->bridge.funcs = &sii902x_bridge_funcs;
> +	sii902x->bridge.of_node = dev->of_node;
> +	ret = drm_bridge_add(&sii902x->bridge);
> +	if (ret) {
> +		dev_err(dev, "Failed to add drm_bridge\n");
> +		return ret;
> +	}
> +
> +	i2c_set_clientdata(client, sii902x);
> +
> +	return 0;
> +}
> +
> +static int sii902x_remove(struct i2c_client *client)
> +
> +{
> +	struct sii902x *sii902x = i2c_get_clientdata(client);
> +
> +	drm_bridge_remove(&sii902x->bridge);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id sii902x_dt_ids[] = {
> +	{ .compatible = "sil,sii9022", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, sii902x_dt_ids);
> +
> +static const struct i2c_device_id sii902x_i2c_ids[] = {
> +	{ "sii9022", 0 },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(i2c, sii902x_i2c_ids);
> +
> +static struct i2c_driver sii902x_driver = {
> +	.probe = sii902x_probe,
> +	.remove = sii902x_remove,
> +	.driver = {
> +		.name = "sii902x",
> +		.of_match_table = sii902x_dt_ids,
> +	},
> +	.id_table = sii902x_i2c_ids,
> +};
> +module_i2c_driver(sii902x_driver);
> +
> +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
> +MODULE_DESCRIPTION("SII902x RGB -> HDMI bridges");
> +MODULE_LICENSE("GPL");
>
Emil Velikov June 15, 2016, 11:53 a.m. UTC | #2
Hi Boris,

On 14 June 2016 at 08:42, Boris Brezillon
<boris.brezillon@free-electrons.com> wrote:
> Add basic support for the sii902x RGB -> HDMI bridge.
> This driver does not support audio output yet.
>
> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Thanks for sticking with my questions/nitpicking.

FWIW the patch is
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

-Emil
diff mbox

Patch

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 8f7423f..a1419214 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -50,6 +50,14 @@  config DRM_PARADE_PS8622
 	---help---
 	  Parade eDP-LVDS bridge chip driver.
 
+config DRM_SII902X
+	tristate "Silicon Image sii902x RGB/HDMI bridge"
+	depends on OF
+	select DRM_KMS_HELPER
+	select REGMAP_I2C
+	---help---
+	  Silicon Image sii902x bridge chip driver.
+
 source "drivers/gpu/drm/bridge/analogix/Kconfig"
 
 endmenu
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 96b13b3..bfec9f8 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -5,4 +5,5 @@  obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
 obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
 obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
+obj-$(CONFIG_DRM_SII902X) += sii902x.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
new file mode 100644
index 0000000..9126d03
--- /dev/null
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -0,0 +1,467 @@ 
+/*
+ * Copyright (C) 2016 Atmel
+ *		      Bo Shen <voice.shen@atmel.com>
+ *
+ * Authors:	      Bo Shen <voice.shen@atmel.com>
+ *		      Boris Brezillon <boris.brezillon@free-electrons.com>
+ *		      Wu, Songjun <Songjun.Wu@atmel.com>
+ *
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+
+#define SII902X_TPI_VIDEO_DATA			0x0
+
+#define SII902X_TPI_PIXEL_REPETITION		0x8
+#define SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT     BIT(5)
+#define SII902X_TPI_AVI_PIXEL_REP_RISING_EDGE   BIT(4)
+#define SII902X_TPI_AVI_PIXEL_REP_4X		3
+#define SII902X_TPI_AVI_PIXEL_REP_2X		1
+#define SII902X_TPI_AVI_PIXEL_REP_NONE		0
+#define SII902X_TPI_CLK_RATIO_HALF		(0 << 6)
+#define SII902X_TPI_CLK_RATIO_1X		(1 << 6)
+#define SII902X_TPI_CLK_RATIO_2X		(2 << 6)
+#define SII902X_TPI_CLK_RATIO_4X		(3 << 6)
+
+#define SII902X_TPI_AVI_IN_FORMAT		0x9
+#define SII902X_TPI_AVI_INPUT_BITMODE_12BIT	BIT(7)
+#define SII902X_TPI_AVI_INPUT_DITHER		BIT(6)
+#define SII902X_TPI_AVI_INPUT_RANGE_LIMITED	(2 << 2)
+#define SII902X_TPI_AVI_INPUT_RANGE_FULL	(1 << 2)
+#define SII902X_TPI_AVI_INPUT_RANGE_AUTO	(0 << 2)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_BLACK	(3 << 0)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV422	(2 << 0)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV444	(1 << 0)
+#define SII902X_TPI_AVI_INPUT_COLORSPACE_RGB	(0 << 0)
+
+#define SII902X_TPI_AVI_INFOFRAME		0x0c
+
+#define SII902X_SYS_CTRL_DATA			0x1a
+#define SII902X_SYS_CTRL_PWR_DWN		BIT(4)
+#define SII902X_SYS_CTRL_AV_MUTE		BIT(3)
+#define SII902X_SYS_CTRL_DDC_BUS_REQ		BIT(2)
+#define SII902X_SYS_CTRL_DDC_BUS_GRTD		BIT(1)
+#define SII902X_SYS_CTRL_OUTPUT_MODE		BIT(0)
+#define SII902X_SYS_CTRL_OUTPUT_HDMI		1
+#define SII902X_SYS_CTRL_OUTPUT_DVI		0
+
+#define SII902X_REG_CHIPID(n)			(0x1b + (n))
+
+#define SII902X_PWR_STATE_CTRL			0x1e
+#define SII902X_AVI_POWER_STATE_MSK		GENMASK(1, 0)
+#define SII902X_AVI_POWER_STATE_D(l)		((l) & SII902X_AVI_POWER_STATE_MSK)
+
+#define SII902X_INT_ENABLE			0x3c
+#define SII902X_INT_STATUS			0x3d
+#define SII902X_HOTPLUG_EVENT			BIT(0)
+#define SII902X_PLUGGED_STATUS			BIT(2)
+
+#define SII902X_REG_TPI_RQB			0xc7
+
+#define SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS	500
+
+struct sii902x {
+	struct i2c_client *i2c;
+	struct regmap *regmap;
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+	struct gpio_desc *reset_gpio;
+};
+
+static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct sii902x, bridge);
+}
+
+static inline struct sii902x *connector_to_sii902x(struct drm_connector *con)
+{
+	return container_of(con, struct sii902x, connector);
+}
+
+static void sii902x_reset(struct sii902x *sii902x)
+{
+	if (!sii902x->reset_gpio)
+		return;
+
+	gpiod_set_value(sii902x->reset_gpio, 1);
+
+	/* The datasheet says treset-min = 100us. Make it 150us to be sure. */
+	usleep_range(150, 200);
+
+	gpiod_set_value(sii902x->reset_gpio, 0);
+}
+
+static enum drm_connector_status
+sii902x_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct sii902x *sii902x = connector_to_sii902x(connector);
+	unsigned int status;
+
+	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
+
+	return (status & SII902X_PLUGGED_STATUS) ?
+	       connector_status_connected : connector_status_disconnected;
+}
+
+static const struct drm_connector_funcs sii902x_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.detect = sii902x_connector_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int sii902x_get_modes(struct drm_connector *connector)
+{
+	struct sii902x *sii902x = connector_to_sii902x(connector);
+	struct regmap *regmap = sii902x->regmap;
+	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+	unsigned long timeout;
+	unsigned int status;
+	struct edid *edid;
+	int num = 0;
+	int ret;
+
+	ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA,
+				 SII902X_SYS_CTRL_DDC_BUS_REQ,
+				 SII902X_SYS_CTRL_DDC_BUS_REQ);
+	if (ret)
+		return ret;
+
+	timeout = jiffies +
+		  msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
+	do {
+		ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
+		if (ret)
+			return ret;
+	} while (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
+		 time_before(jiffies, timeout));
+
+	if (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
+		dev_err(&sii902x->i2c->dev, "failed to acquire the i2c bus");
+		return -ETIMEDOUT;
+	}
+
+	ret = regmap_write(regmap, SII902X_SYS_CTRL_DATA, status);
+	if (ret)
+		return ret;
+
+	edid = drm_get_edid(connector, sii902x->i2c->adapter);
+	drm_mode_connector_update_edid_property(connector, edid);
+	if (edid) {
+		num = drm_add_edid_modes(connector, edid);
+		kfree(edid);
+	}
+
+	ret = drm_display_info_set_bus_formats(&connector->display_info,
+					       &bus_format, 1);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA,
+				 SII902X_SYS_CTRL_DDC_BUS_REQ |
+				 SII902X_SYS_CTRL_DDC_BUS_GRTD, 0);
+	if (ret)
+		return ret;
+
+	timeout = jiffies +
+		  msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS);
+	do {
+		ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status);
+		if (ret)
+			return ret;
+	} while (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
+			   SII902X_SYS_CTRL_DDC_BUS_GRTD) &&
+		 time_before(jiffies, timeout));
+
+	if (status & (SII902X_SYS_CTRL_DDC_BUS_REQ |
+		      SII902X_SYS_CTRL_DDC_BUS_GRTD)) {
+		dev_err(&sii902x->i2c->dev, "failed to release the i2c bus");
+		return -ETIMEDOUT;
+	}
+
+	return num;
+}
+
+static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,
+					       struct drm_display_mode *mode)
+{
+	/* TODO: check mode */
+
+	return MODE_OK;
+}
+
+static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = {
+	.get_modes = sii902x_get_modes,
+	.mode_valid = sii902x_mode_valid,
+};
+
+static void sii902x_bridge_disable(struct drm_bridge *bridge)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+
+	regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
+			   SII902X_SYS_CTRL_PWR_DWN,
+			   SII902X_SYS_CTRL_PWR_DWN);
+}
+
+static void sii902x_bridge_enable(struct drm_bridge *bridge)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+
+	regmap_update_bits(sii902x->regmap, SII902X_PWR_STATE_CTRL,
+			   SII902X_AVI_POWER_STATE_MSK,
+			   SII902X_AVI_POWER_STATE_D(0));
+	regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
+			   SII902X_SYS_CTRL_PWR_DWN, 0);
+}
+
+static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adj)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+	struct regmap *regmap = sii902x->regmap;
+	u8 buf[HDMI_INFOFRAME_SIZE(AVI)];
+	struct hdmi_avi_infoframe frame;
+	int ret;
+
+	buf[0] = adj->clock;
+	buf[1] = adj->clock >> 8;
+	buf[2] = adj->vrefresh;
+	buf[3] = 0x00;
+	buf[4] = adj->hdisplay;
+	buf[5] = adj->hdisplay >> 8;
+	buf[6] = adj->vdisplay;
+	buf[7] = adj->vdisplay >> 8;
+	buf[8] = SII902X_TPI_CLK_RATIO_1X | SII902X_TPI_AVI_PIXEL_REP_NONE |
+		 SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT;
+	buf[9] = SII902X_TPI_AVI_INPUT_RANGE_AUTO |
+		 SII902X_TPI_AVI_INPUT_COLORSPACE_RGB;
+
+	ret = regmap_bulk_write(regmap, SII902X_TPI_VIDEO_DATA, buf, 10);
+	if (ret)
+		return;
+
+	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj);
+	if (ret < 0) {
+		DRM_ERROR("couldn't fill AVI infoframe\n");
+		return;
+	}
+
+	ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf));
+	if (ret < 0) {
+		DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
+		return;
+	}
+
+	/* Do not send the infoframe header, but keep the CRC field. */
+	regmap_bulk_write(regmap, SII902X_TPI_AVI_INFOFRAME,
+			  buf + HDMI_INFOFRAME_HEADER_SIZE - 1,
+			  HDMI_AVI_INFOFRAME_SIZE + 1);
+}
+
+static int sii902x_bridge_attach(struct drm_bridge *bridge)
+{
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
+	struct drm_device *drm = bridge->dev;
+	int ret;
+
+	drm_connector_helper_add(&sii902x->connector,
+				 &sii902x_connector_helper_funcs);
+
+	if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) {
+		dev_err(&sii902x->i2c->dev,
+			"sii902x driver is only compatible with DRM devices supporting atomic updates");
+		return -ENOTSUPP;
+	}
+
+	ret = drm_connector_init(drm, &sii902x->connector,
+				 &sii902x_connector_funcs,
+				 DRM_MODE_CONNECTOR_HDMIA);
+	if (ret)
+		return ret;
+
+	if (sii902x->i2c->irq > 0)
+		sii902x->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	else
+		sii902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT;
+
+	drm_mode_connector_attach_encoder(&sii902x->connector, bridge->encoder);
+
+	return 0;
+}
+
+static const struct drm_bridge_funcs sii902x_bridge_funcs = {
+	.attach = sii902x_bridge_attach,
+	.mode_set = sii902x_bridge_mode_set,
+	.disable = sii902x_bridge_disable,
+	.enable = sii902x_bridge_enable,
+};
+
+static const struct regmap_range sii902x_volatile_ranges[] = {
+	{ .range_min = 0, .range_max = 0xff },
+};
+
+static const struct regmap_access_table sii902x_volatile_table = {
+	.yes_ranges = sii902x_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sii902x_volatile_ranges),
+};
+
+static const struct regmap_config sii902x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &sii902x_volatile_table,
+	.cache_type = REGCACHE_NONE,
+};
+
+static irqreturn_t sii902x_interrupt(int irq, void *data)
+{
+	struct sii902x *sii902x = data;
+	unsigned int status = 0;
+
+	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
+	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
+
+	if ((status & SII902X_HOTPLUG_EVENT) && sii902x->bridge.dev)
+		drm_helper_hpd_irq_event(sii902x->bridge.dev);
+
+	return IRQ_HANDLED;
+}
+
+static int sii902x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	unsigned int status = 0;
+	struct sii902x *sii902x;
+	u8 chipid[4];
+	int ret;
+
+	sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL);
+	if (!sii902x)
+		return -ENOMEM;
+
+	sii902x->i2c = client;
+	sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config);
+	if (IS_ERR(sii902x->regmap))
+		return PTR_ERR(sii902x->regmap);
+
+	sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						      GPIOD_OUT_LOW);
+	if (IS_ERR(sii902x->reset_gpio)) {
+		dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n",
+			PTR_ERR(sii902x->reset_gpio));
+		return PTR_ERR(sii902x->reset_gpio);
+	}
+
+	sii902x_reset(sii902x);
+
+	ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
+	if (ret)
+		return ret;
+
+	ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0),
+			       &chipid, 4);
+	if (ret) {
+		dev_err(dev, "regmap_read failed %d\n", ret);
+		return ret;
+	}
+
+	if (chipid[0] != 0xb0) {
+		dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n",
+			chipid[0]);
+		return -EINVAL;
+	}
+
+	/* Clear all pending interrupts */
+	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
+	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
+
+	if (client->irq > 0) {
+		regmap_write(sii902x->regmap, SII902X_INT_ENABLE,
+			     SII902X_HOTPLUG_EVENT);
+
+		ret = devm_request_threaded_irq(dev, client->irq, NULL,
+						sii902x_interrupt,
+						IRQF_ONESHOT, dev_name(dev),
+						sii902x);
+		if (ret)
+			return ret;
+	}
+
+	sii902x->bridge.funcs = &sii902x_bridge_funcs;
+	sii902x->bridge.of_node = dev->of_node;
+	ret = drm_bridge_add(&sii902x->bridge);
+	if (ret) {
+		dev_err(dev, "Failed to add drm_bridge\n");
+		return ret;
+	}
+
+	i2c_set_clientdata(client, sii902x);
+
+	return 0;
+}
+
+static int sii902x_remove(struct i2c_client *client)
+
+{
+	struct sii902x *sii902x = i2c_get_clientdata(client);
+
+	drm_bridge_remove(&sii902x->bridge);
+
+	return 0;
+}
+
+static const struct of_device_id sii902x_dt_ids[] = {
+	{ .compatible = "sil,sii9022", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sii902x_dt_ids);
+
+static const struct i2c_device_id sii902x_i2c_ids[] = {
+	{ "sii9022", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sii902x_i2c_ids);
+
+static struct i2c_driver sii902x_driver = {
+	.probe = sii902x_probe,
+	.remove = sii902x_remove,
+	.driver = {
+		.name = "sii902x",
+		.of_match_table = sii902x_dt_ids,
+	},
+	.id_table = sii902x_i2c_ids,
+};
+module_i2c_driver(sii902x_driver);
+
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("SII902x RGB -> HDMI bridges");
+MODULE_LICENSE("GPL");