[v2,1/2] clk: exynos5433: do not use CLK_IGNORE_UNUSED for SPI clocks
diff mbox

Message ID 1467032594-7643-1-git-send-email-andi.shyti@samsung.com
State Not Applicable
Headers show

Commit Message

Andi Shyti June 27, 2016, 1:03 p.m. UTC
The CLK_IGNORE_UNUSED flag has to be avoided whenever possible.
Use the CLK_IS_CRITICAL flag instead, which enables the clock line
during boot time.

While none of the SCLK_SPI need to be alive all the time as that
clock is handled by the SPI driver as a busclk whenever needed.

Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---

Hi,

this patch comes after Tomasz's review where he discouraged from
using the CLK_IGNORE_UNUSED flag. Therefore I added one more
patch to the original where I remove that flag for the SPI1
whenever not necessary while I replace it with the
CLK_IS_CRITICAL for the ioclk.

This patch makes this driver the first using the "critical"
functionality :)

Andi

 drivers/clk/samsung/clk-exynos5433.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Andi Shyti June 30, 2016, 7:18 a.m. UTC | #1
Hi,

On Mon, Jun 27, 2016 at 10:03:13PM +0900, Andi Shyti wrote:
> The CLK_IGNORE_UNUSED flag has to be avoided whenever possible.
> Use the CLK_IS_CRITICAL flag instead, which enables the clock line
> during boot time.
> 
> While none of the SCLK_SPI need to be alive all the time as that
> clock is handled by the SPI driver as a busclk whenever needed.
> 
> Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> ---

sorry for spamming, please ignore this patch, some more testing
has shown that if the SCLK_SPI1 is not kept alive, the device not
always works.

Thanks and sorry again,
Andi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
index 128527b..dcb4391 100644
--- a/drivers/clk/samsung/clk-exynos5433.c
+++ b/drivers/clk/samsung/clk-exynos5433.c
@@ -1655,7 +1655,7 @@  static struct samsung_gate_clock peric_gate_clks[] __initdata = {
 			ENABLE_SCLK_PERIC, 13, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_SPI1, "sclk_ioclk_spi1", "ioclk_spi1_clk_in",
 			ENABLE_SCLK_PERIC, 12,
-			CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+			CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_SPI0, "sclk_ioclk_spi0", "ioclk_spi0_clk_in",
 			ENABLE_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_IOCLK_I2S1_BCLK, "sclk_ioclk_i2s1_bclk",
@@ -1670,7 +1670,7 @@  static struct samsung_gate_clock peric_gate_clks[] __initdata = {
 	GATE(CLK_SCLK_SPI2, "sclk_spi2", "sclk_spi2_peric", ENABLE_SCLK_PERIC,
 			5, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI1, "sclk_spi1", "sclk_spi1_peric", ENABLE_SCLK_PERIC,
-			4, CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
+			4, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_SPI0, "sclk_spi0", "sclk_spi0_peric", ENABLE_SCLK_PERIC,
 			3, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_UART2, "sclk_uart2", "sclk_uart2_peric",