diff mbox

[v2,3/4] btrfs/125: test sysfs exports of allocation and device membership info

Message ID 1467058454-25907-4-git-send-email-jeffm@suse.com (mailing list archive)
State New, archived
Headers show

Commit Message

Jeff Mahoney June 27, 2016, 8:14 p.m. UTC
From: Jeff Mahoney <jeffm@suse.com>

This tests the sysfs publishing for btrfs allocation and device
membership info under a number of different layouts, similar to the
btrfs replace test. We test the allocation files only for existence and
that they contain numerical values. We test the device membership
by mapping the devices used to create the file system to sysfs paths
and matching them against the paths used for the device membership
symlinks.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
---
 common/btrfs        |   7 +++
 common/config       |   7 ++-
 tests/btrfs/125     | 177 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/btrfs/125.out |   1 +
 tests/btrfs/group   |   1 +
 5 files changed, 190 insertions(+), 3 deletions(-)
 create mode 100755 tests/btrfs/125
 create mode 100644 tests/btrfs/125.out

Comments

Eryu Guan June 30, 2016, 4:41 a.m. UTC | #1
On Mon, Jun 27, 2016 at 04:14:13PM -0400, jeffm@suse.com wrote:
> From: Jeff Mahoney <jeffm@suse.com>
> 
> This tests the sysfs publishing for btrfs allocation and device
> membership info under a number of different layouts, similar to the
> btrfs replace test. We test the allocation files only for existence and
> that they contain numerical values. We test the device membership
> by mapping the devices used to create the file system to sysfs paths
> and matching them against the paths used for the device membership
> symlinks.
> 
> Signed-off-by: Jeff Mahoney <jeffm@suse.com>
> ---
>  common/btrfs        |   7 +++
>  common/config       |   7 ++-
>  tests/btrfs/125     | 177 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  tests/btrfs/125.out |   1 +
>  tests/btrfs/group   |   1 +
>  5 files changed, 190 insertions(+), 3 deletions(-)
>  create mode 100755 tests/btrfs/125
>  create mode 100644 tests/btrfs/125.out
> 
> diff --git a/common/btrfs b/common/btrfs
> index b972b13..5828d0a 100644
> --- a/common/btrfs
> +++ b/common/btrfs
> @@ -41,3 +41,10 @@ _require_btrfs_ioctl()
>  		_notrun "btrfs ioctl $ioctl not implemented."
>  	fi
>  }
> +
> +# Requires the minimum size pool for largest btrfs RAID test
> +_require_btrfs_raid_dev_pool()
> +{
> +	_require_scratch_dev_pool 4 # RAID10
> +	_require_scratch_dev_pool_equal_size
> +}

I don't think this helper is needed, calling the two _requires in the
test directly is good enough and clear.

> diff --git a/common/config b/common/config
> index c25b1ec..8577924 100644
> --- a/common/config
> +++ b/common/config
> @@ -201,13 +201,14 @@ export DEBUGFS_PROG="`set_prog_path debugfs`"
>  # newer systems have udevadm command but older systems like RHEL5 don't.
>  # But if neither one is available, just set it to "sleep 1" to wait for lv to
>  # be settled
> -UDEV_SETTLE_PROG="`set_prog_path udevadm`"
> -if [ "$UDEV_SETTLE_PROG" == "" ]; then
> +UDEVADM_PROG="`set_prog_path udevadm`"
> +if [ "$UDEVADM_PROG" == "" ]; then
>  	# try udevsettle command
>  	UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
>  else
>  	# udevadm is available, add 'settle' as subcommand
> -	UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
> +	UDEV_SETTLE_PROG="$UDEVADM_PROG settle"
> +	export UDEVADM_PROG

UDEVADM_PROG should be exported no matter it's empty or not.

>  fi
>  # neither command is available, use sleep 1
>  if [ "$UDEV_SETTLE_PROG" == "" ]; then
> diff --git a/tests/btrfs/125 b/tests/btrfs/125
> new file mode 100755
> index 0000000..999a10e
> --- /dev/null
> +++ b/tests/btrfs/125
> @@ -0,0 +1,177 @@
> +#! /bin/bash
> +# FS QA Test No. 125
> +#
> +# Test of the btrfs sysfs publishing
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (C) 2016 SUSE.  All rights reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#
> +#-----------------------------------------------------------------------
> +#
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1
> +
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> +	cd /
> +	rm -f $tmp.*
> +}
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/btrfs
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs btrfs
> +_supported_os Linux
> +_require_scratch
> +_require_command "$UDEVADM_PROG" udevadm
> +_require_test
> +_require_btrfs_sysfs
> +_require_btrfs_raid_dev_pool
> +
> +sysfs_root=$(_btrfs_get_sysfs $TEST_DIR)
> +
> +[ -d "$sysfs_root/allocation" ] || _notrun "sysfs allocation dir not found"
> +[ -d "$sysfs_root/devices" ] || _notrun "sysfs devices dir not found"

With _require_btrfs_sysfs updated, we can just call

_require_btrfs_sysfs allocation
_require_btrfs_sysfs devices

> +
> +check_file()
> +{
> +	local file=$1
> +	base="$(basename $(dirname $file))/$(basename $file)"
> +	value="$(cat $file)"
> +	if [ -n "$(echo $value | tr -d 0-9)" ]; then
> +		echo "ERROR: $base: numerical value expected" \
> +		     "(got $value)"
> +	fi
> +}
> +
> +check_chunk()
> +{
> +	path=$1
> +	mkfs_options=$2
> +
> +	chunktype=$(basename $path)
> +	[ -d "$path" ] || echo "No $chunktype directory."
> +
> +	for file in bytes_may_use bytes_pinned bytes_reserved bytes_used \
> +		    disk_total disk_used flags total_bytes \
> +		    total_bytes_pinned; do
> +		check_file "$path/$file"
> +	done
> +
> +	if [ "$chunktype" = "data" -o "$chunktype" = "mixed" ]; then
> +		opt="-d"
> +	elif [ "$chunktype" = "metadata" -o "$chunktype" = "system" ]; then
> +		opt="-m"
> +	fi
> +
> +	profile=$(echo $mkfs_options | sed -e "s/.*$opt \([[:alnum:]]*\).*/\1/")
> +	[ -d "$path/$profile" ] || echo "No $profile dir for $chunktype"
> +
> +	for file in total_bytes used_bytes; do
> +		check_file $path/$profile/$file
> +	done
> +}
> +
> +check_dev_link()
> +{
> +	local dev=$1
> +	DEV="/sys/$($UDEVADM_PROG info --query=path $dev)"
> +	DEV="$(readlink -f $DEV)"

lowercase local names

> +	found=false
> +	for link in $sysfs_base/devices/*; do
> +		LINK="$(readlink -f $link)"
> +		if [ "$LINK" = "$DEV" ]; then
> +			found=true
> +			break
> +		fi
> +	done
> +	if ! $found; then
> +		echo "Symlink for $dev missing in $sysfs_base/devices"
> +	fi
> +	return 0
> +}
> +
> +workout()
> +{
> +	local mkfs_options="$1"
> +	local num_devs4raid="$2"
> +	local fssize
> +	local used_devs=""
> +
> +	if [ "$num_devs4raid" -gt 1 ]; then
> +		used_devs=$(echo $SCRATCH_DEV_POOL|tr '\t' ' '| \
> +			    cut -d ' ' -f 2-$num_devs4raid)
> +	fi
> +
> +	# We check the error code since mkfs can fail if the devices
> +	# are specified incorrectly but we may still have a file system
> +	# from a prior run.
> +	_scratch_mkfs $mkfs_options $used_devs 2>> $seqres.full || \
> +		_fail "mkfs failed"

Ah, I got it wrong about _scratch_mkfs previously, SCRATCH_DEV was cut
off from $used_devs, so _scratch_mkfs works here. It's not obvious,
would be better to have some comments here.

Thanks,
Eryu

> +
> +	_scratch_mount
> +
> +	# Check allocation
> +	sysfs_base="$(_btrfs_get_sysfs $SCRATCH_MNT)"
> +
> +	mixed=false
> +	case "$mkfs_options" in
> +	*-M*)
> +		mixed=true;
> +		;;
> +	esac
> +
> +	check_chunk "$sysfs_base/allocation/system" "$mkfs_options"
> +	if $mixed; then
> +		check_chunk "$sysfs_base/allocation/mixed" "$mkfs_options"
> +	else
> +		check_chunk "$sysfs_base/allocation/data" "$mkfs_options"
> +		check_chunk "$sysfs_base/allocation/metadata" "$mkfs_options"
> +	fi
> +
> +	for dev in $used_devs; do
> +		check_dev_link $dev
> +	done
> +
> +	_scratch_unmount
> +}
> +
> +workout "-m single -d single" 1
> +workout "-m single -d single -M" 1
> +workout "-m dup -d single" 1
> +workout "-m dup -d dup -M" 1
> +workout "-m raid0 -d raid0" 2
> +workout "-m raid1 -d raid1" 2
> +workout "-m raid5 -d raid5" 2
> +workout "-m raid6 -d raid6" 3
> +workout "-m raid10 -d raid10" 4
> +
> +status=0
> +exit
> diff --git a/tests/btrfs/125.out b/tests/btrfs/125.out
> new file mode 100644
> index 0000000..4f22ab0
> --- /dev/null
> +++ b/tests/btrfs/125.out
> @@ -0,0 +1 @@
> +QA output created by 125
> diff --git a/tests/btrfs/group b/tests/btrfs/group
> index 8b5050e..3535f02 100644
> --- a/tests/btrfs/group
> +++ b/tests/btrfs/group
> @@ -127,3 +127,4 @@
>  122 auto quick snapshot qgroup
>  123 auto quick qgroup
>  124 auto quick metadata
> +125 auto quick metadata
> -- 
> 1.8.5.6
> 
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/common/btrfs b/common/btrfs
index b972b13..5828d0a 100644
--- a/common/btrfs
+++ b/common/btrfs
@@ -41,3 +41,10 @@  _require_btrfs_ioctl()
 		_notrun "btrfs ioctl $ioctl not implemented."
 	fi
 }
+
+# Requires the minimum size pool for largest btrfs RAID test
+_require_btrfs_raid_dev_pool()
+{
+	_require_scratch_dev_pool 4 # RAID10
+	_require_scratch_dev_pool_equal_size
+}
diff --git a/common/config b/common/config
index c25b1ec..8577924 100644
--- a/common/config
+++ b/common/config
@@ -201,13 +201,14 @@  export DEBUGFS_PROG="`set_prog_path debugfs`"
 # newer systems have udevadm command but older systems like RHEL5 don't.
 # But if neither one is available, just set it to "sleep 1" to wait for lv to
 # be settled
-UDEV_SETTLE_PROG="`set_prog_path udevadm`"
-if [ "$UDEV_SETTLE_PROG" == "" ]; then
+UDEVADM_PROG="`set_prog_path udevadm`"
+if [ "$UDEVADM_PROG" == "" ]; then
 	# try udevsettle command
 	UDEV_SETTLE_PROG="`set_prog_path udevsettle`"
 else
 	# udevadm is available, add 'settle' as subcommand
-	UDEV_SETTLE_PROG="$UDEV_SETTLE_PROG settle"
+	UDEV_SETTLE_PROG="$UDEVADM_PROG settle"
+	export UDEVADM_PROG
 fi
 # neither command is available, use sleep 1
 if [ "$UDEV_SETTLE_PROG" == "" ]; then
diff --git a/tests/btrfs/125 b/tests/btrfs/125
new file mode 100755
index 0000000..999a10e
--- /dev/null
+++ b/tests/btrfs/125
@@ -0,0 +1,177 @@ 
+#! /bin/bash
+# FS QA Test No. 125
+#
+# Test of the btrfs sysfs publishing
+#
+#-----------------------------------------------------------------------
+# Copyright (C) 2016 SUSE.  All rights reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1
+
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/btrfs
+. ./common/filter
+
+# real QA test starts here
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+_require_command "$UDEVADM_PROG" udevadm
+_require_test
+_require_btrfs_sysfs
+_require_btrfs_raid_dev_pool
+
+sysfs_root=$(_btrfs_get_sysfs $TEST_DIR)
+
+[ -d "$sysfs_root/allocation" ] || _notrun "sysfs allocation dir not found"
+[ -d "$sysfs_root/devices" ] || _notrun "sysfs devices dir not found"
+
+check_file()
+{
+	local file=$1
+	base="$(basename $(dirname $file))/$(basename $file)"
+	value="$(cat $file)"
+	if [ -n "$(echo $value | tr -d 0-9)" ]; then
+		echo "ERROR: $base: numerical value expected" \
+		     "(got $value)"
+	fi
+}
+
+check_chunk()
+{
+	path=$1
+	mkfs_options=$2
+
+	chunktype=$(basename $path)
+	[ -d "$path" ] || echo "No $chunktype directory."
+
+	for file in bytes_may_use bytes_pinned bytes_reserved bytes_used \
+		    disk_total disk_used flags total_bytes \
+		    total_bytes_pinned; do
+		check_file "$path/$file"
+	done
+
+	if [ "$chunktype" = "data" -o "$chunktype" = "mixed" ]; then
+		opt="-d"
+	elif [ "$chunktype" = "metadata" -o "$chunktype" = "system" ]; then
+		opt="-m"
+	fi
+
+	profile=$(echo $mkfs_options | sed -e "s/.*$opt \([[:alnum:]]*\).*/\1/")
+	[ -d "$path/$profile" ] || echo "No $profile dir for $chunktype"
+
+	for file in total_bytes used_bytes; do
+		check_file $path/$profile/$file
+	done
+}
+
+check_dev_link()
+{
+	local dev=$1
+	DEV="/sys/$($UDEVADM_PROG info --query=path $dev)"
+	DEV="$(readlink -f $DEV)"
+	found=false
+	for link in $sysfs_base/devices/*; do
+		LINK="$(readlink -f $link)"
+		if [ "$LINK" = "$DEV" ]; then
+			found=true
+			break
+		fi
+	done
+	if ! $found; then
+		echo "Symlink for $dev missing in $sysfs_base/devices"
+	fi
+	return 0
+}
+
+workout()
+{
+	local mkfs_options="$1"
+	local num_devs4raid="$2"
+	local fssize
+	local used_devs=""
+
+	if [ "$num_devs4raid" -gt 1 ]; then
+		used_devs=$(echo $SCRATCH_DEV_POOL|tr '\t' ' '| \
+			    cut -d ' ' -f 2-$num_devs4raid)
+	fi
+
+	# We check the error code since mkfs can fail if the devices
+	# are specified incorrectly but we may still have a file system
+	# from a prior run.
+	_scratch_mkfs $mkfs_options $used_devs 2>> $seqres.full || \
+		_fail "mkfs failed"
+
+	_scratch_mount
+
+	# Check allocation
+	sysfs_base="$(_btrfs_get_sysfs $SCRATCH_MNT)"
+
+	mixed=false
+	case "$mkfs_options" in
+	*-M*)
+		mixed=true;
+		;;
+	esac
+
+	check_chunk "$sysfs_base/allocation/system" "$mkfs_options"
+	if $mixed; then
+		check_chunk "$sysfs_base/allocation/mixed" "$mkfs_options"
+	else
+		check_chunk "$sysfs_base/allocation/data" "$mkfs_options"
+		check_chunk "$sysfs_base/allocation/metadata" "$mkfs_options"
+	fi
+
+	for dev in $used_devs; do
+		check_dev_link $dev
+	done
+
+	_scratch_unmount
+}
+
+workout "-m single -d single" 1
+workout "-m single -d single -M" 1
+workout "-m dup -d single" 1
+workout "-m dup -d dup -M" 1
+workout "-m raid0 -d raid0" 2
+workout "-m raid1 -d raid1" 2
+workout "-m raid5 -d raid5" 2
+workout "-m raid6 -d raid6" 3
+workout "-m raid10 -d raid10" 4
+
+status=0
+exit
diff --git a/tests/btrfs/125.out b/tests/btrfs/125.out
new file mode 100644
index 0000000..4f22ab0
--- /dev/null
+++ b/tests/btrfs/125.out
@@ -0,0 +1 @@ 
+QA output created by 125
diff --git a/tests/btrfs/group b/tests/btrfs/group
index 8b5050e..3535f02 100644
--- a/tests/btrfs/group
+++ b/tests/btrfs/group
@@ -127,3 +127,4 @@ 
 122 auto quick snapshot qgroup
 123 auto quick qgroup
 124 auto quick metadata
+125 auto quick metadata