[1/2] xfstests: support dm-delay to introduce I/O delays
diff mbox

Message ID 1467290974-13203-2-git-send-email-bfoster@redhat.com
State New
Headers show

Commit Message

Brian Foster June 30, 2016, 12:49 p.m. UTC
Add some infrastructure in common/dmdelay to support use of the dm-delay
device-mapper module within tests. This is effectively copied from the
existing infrastructure in common/dmflakey. This provides the ability to
delay I/O. It only supports delaying read I/O as that is all that is
required at this point in time.

Signed-off-by: Brian Foster <bfoster@redhat.com>
---
 common/dmdelay | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 89 insertions(+)
 create mode 100644 common/dmdelay

Comments

Eryu Guan June 30, 2016, 1:19 p.m. UTC | #1
On Thu, Jun 30, 2016 at 08:49:33AM -0400, Brian Foster wrote:
> Add some infrastructure in common/dmdelay to support use of the dm-delay
> device-mapper module within tests. This is effectively copied from the
> existing infrastructure in common/dmflakey. This provides the ability to
> delay I/O. It only supports delaying read I/O as that is all that is
> required at this point in time.
> 
> Signed-off-by: Brian Foster <bfoster@redhat.com>
> ---
>  common/dmdelay | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 89 insertions(+)
>  create mode 100644 common/dmdelay
> 
> diff --git a/common/dmdelay b/common/dmdelay
> new file mode 100644
> index 0000000..c53e2dd
> --- /dev/null
> +++ b/common/dmdelay
> @@ -0,0 +1,89 @@
> +##/bin/bash
> +#
> +# Copyright (c) 2016 Red Hat, Inc.  All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> +#
> +#
> +# common functions for setting up and tearing down a dmdelay device
> +
> +DELAY_NONE=0
> +DELAY_READ=1
> +
> +echo $MOUNT_OPTIONS | grep -q dax
> +if [ $? -eq 0 ]; then
> +	_notrun "Cannot run tests with DAX on dmdelay devices"
> +fi
> +
> +_init_delay()
> +{
> +	local BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
> +	DELAY_DEV=/dev/mapper/delay-test
> +	DELAY_TABLE="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 0"
> +	DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 10000 $SCRATCH_DEV 0 0"
> +	$DMSETUP_PROG create delay-test --table "$DELAY_TABLE" || \
> +		_fatal "failed to create delay device"
> +	$DMSETUP_PROG mknodes > /dev/null 2>&1
> +}
> +
> +_mount_delay()
> +{
> +	_scratch_options mount
> +	mount -t $FSTYP $SCRATCH_OPTIONS $MOUNT_OPTIONS $DELAY_DEV $SCRATCH_MNT

I replaced mount with $MOUNT_PROG :)

> +}
> +
> +_unmount_delay()
> +{
> +	$UMOUNT_PROG $SCRATCH_MNT
> +}
> +
> +_cleanup_delay()
> +{
> +	# If dmsetup load fails then we need to make sure to do resume here
> +	# otherwise the umount will hang
> +	$DMSETUP_PROG resume delay-test > /dev/null 2>&1
> +	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> +	# wait for device to be fully settled so that 'dmsetup remove' doesn't
> +	# fail due to EBUSY
> +	$UDEV_SETTLE_PROG >/dev/null 2>&1
> +	$DMSETUP_PROG remove delay-test > /dev/null 2>&1
> +	$DMSETUP_PROG mknodes > /dev/null 2>&1
> +}
> +
> +# _load_delay_table <table> [lockfs]
> +#
> +# This defaults to --nolockfs, which doesn't freeze_fs() before loading the new
> +# table, so it simulates power failure.

Seems this comment is for dmflakey and needs update. Can you please
confirm? I can fix it at commit time if needs update, no v2 is needed.

Thanks,
Eryu

> +_load_delay_table()
> +{
> +	table="$DELAY_TABLE"
> +	[ $1 -eq $DELAY_READ ] && table="$DELAY_TABLE_RDELAY"
> +
> +	suspend_opt="--nolockfs"
> +	[ $# -gt 1 ] && [ $2 -eq 1 ] && suspend_opt=""
> +
> +	# run a suspend/resume cycle to avoid excessive resume delays once a
> +	# delay is introduced below
> +	$DMSETUP_PROG suspend $suspend_opt delay-test
> +	$DMSETUP_PROG resume $suspend_opt delay-test
> +
> +	$DMSETUP_PROG suspend $suspend_opt delay-test
> +	[ $? -ne 0 ] && _fatal "failed to suspend delay-test"
> +
> +	$DMSETUP_PROG load delay-test --table "$table"
> +	[ $? -ne 0 ] && _fatal "failed to load table into delay-test"
> +
> +	$DMSETUP_PROG resume delay-test
> +	[ $? -ne 0 ] && _fatal  "failed to resume delay-test"
> +}
> -- 
> 2.5.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe fstests" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Brian Foster June 30, 2016, 1:44 p.m. UTC | #2
On Thu, Jun 30, 2016 at 09:19:22PM +0800, Eryu Guan wrote:
> On Thu, Jun 30, 2016 at 08:49:33AM -0400, Brian Foster wrote:
> > Add some infrastructure in common/dmdelay to support use of the dm-delay
> > device-mapper module within tests. This is effectively copied from the
> > existing infrastructure in common/dmflakey. This provides the ability to
> > delay I/O. It only supports delaying read I/O as that is all that is
> > required at this point in time.
> > 
> > Signed-off-by: Brian Foster <bfoster@redhat.com>
> > ---
> >  common/dmdelay | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 89 insertions(+)
> >  create mode 100644 common/dmdelay
> > 
> > diff --git a/common/dmdelay b/common/dmdelay
> > new file mode 100644
> > index 0000000..c53e2dd
> > --- /dev/null
> > +++ b/common/dmdelay
> > @@ -0,0 +1,89 @@
> > +##/bin/bash
> > +#
> > +# Copyright (c) 2016 Red Hat, Inc.  All Rights Reserved.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> > +#
> > +#
> > +# common functions for setting up and tearing down a dmdelay device
> > +
> > +DELAY_NONE=0
> > +DELAY_READ=1
> > +
> > +echo $MOUNT_OPTIONS | grep -q dax
> > +if [ $? -eq 0 ]; then
> > +	_notrun "Cannot run tests with DAX on dmdelay devices"
> > +fi
> > +
> > +_init_delay()
> > +{
> > +	local BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
> > +	DELAY_DEV=/dev/mapper/delay-test
> > +	DELAY_TABLE="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 0"
> > +	DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 10000 $SCRATCH_DEV 0 0"
> > +	$DMSETUP_PROG create delay-test --table "$DELAY_TABLE" || \
> > +		_fatal "failed to create delay device"
> > +	$DMSETUP_PROG mknodes > /dev/null 2>&1
> > +}
> > +
> > +_mount_delay()
> > +{
> > +	_scratch_options mount
> > +	mount -t $FSTYP $SCRATCH_OPTIONS $MOUNT_OPTIONS $DELAY_DEV $SCRATCH_MNT
> 
> I replaced mount with $MOUNT_PROG :)
> 

Thanks.

> > +}
> > +
> > +_unmount_delay()
> > +{
> > +	$UMOUNT_PROG $SCRATCH_MNT
> > +}
> > +
> > +_cleanup_delay()
> > +{
> > +	# If dmsetup load fails then we need to make sure to do resume here
> > +	# otherwise the umount will hang
> > +	$DMSETUP_PROG resume delay-test > /dev/null 2>&1
> > +	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> > +	# wait for device to be fully settled so that 'dmsetup remove' doesn't
> > +	# fail due to EBUSY
> > +	$UDEV_SETTLE_PROG >/dev/null 2>&1
> > +	$DMSETUP_PROG remove delay-test > /dev/null 2>&1
> > +	$DMSETUP_PROG mknodes > /dev/null 2>&1
> > +}
> > +
> > +# _load_delay_table <table> [lockfs]
> > +#
> > +# This defaults to --nolockfs, which doesn't freeze_fs() before loading the new
> > +# table, so it simulates power failure.
> 
> Seems this comment is for dmflakey and needs update. Can you please
> confirm? I can fix it at commit time if needs update, no v2 is needed.
> 

Hmm, the command itself is part of the dmsetup suspend command, but the
power failure bit is probably not relevant since we aren't dropping
I/Os. We could just kill that part of the comment (everything after the
comma)..?

Brian

> Thanks,
> Eryu
> 
> > +_load_delay_table()
> > +{
> > +	table="$DELAY_TABLE"
> > +	[ $1 -eq $DELAY_READ ] && table="$DELAY_TABLE_RDELAY"
> > +
> > +	suspend_opt="--nolockfs"
> > +	[ $# -gt 1 ] && [ $2 -eq 1 ] && suspend_opt=""
> > +
> > +	# run a suspend/resume cycle to avoid excessive resume delays once a
> > +	# delay is introduced below
> > +	$DMSETUP_PROG suspend $suspend_opt delay-test
> > +	$DMSETUP_PROG resume $suspend_opt delay-test
> > +
> > +	$DMSETUP_PROG suspend $suspend_opt delay-test
> > +	[ $? -ne 0 ] && _fatal "failed to suspend delay-test"
> > +
> > +	$DMSETUP_PROG load delay-test --table "$table"
> > +	[ $? -ne 0 ] && _fatal "failed to load table into delay-test"
> > +
> > +	$DMSETUP_PROG resume delay-test
> > +	[ $? -ne 0 ] && _fatal  "failed to resume delay-test"
> > +}
> > -- 
> > 2.5.5
> > 
> > --
> > To unsubscribe from this list: send the line "unsubscribe fstests" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Eryu Guan June 30, 2016, 1:47 p.m. UTC | #3
On Thu, Jun 30, 2016 at 09:44:02AM -0400, Brian Foster wrote:
> On Thu, Jun 30, 2016 at 09:19:22PM +0800, Eryu Guan wrote:
> > On Thu, Jun 30, 2016 at 08:49:33AM -0400, Brian Foster wrote:
> > > Add some infrastructure in common/dmdelay to support use of the dm-delay
> > > device-mapper module within tests. This is effectively copied from the
> > > existing infrastructure in common/dmflakey. This provides the ability to
> > > delay I/O. It only supports delaying read I/O as that is all that is
> > > required at this point in time.
> > > 
> > > Signed-off-by: Brian Foster <bfoster@redhat.com>
> > > ---
> > >  common/dmdelay | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> > >  1 file changed, 89 insertions(+)
> > >  create mode 100644 common/dmdelay
> > > 
> > > diff --git a/common/dmdelay b/common/dmdelay
> > > new file mode 100644
> > > index 0000000..c53e2dd
> > > --- /dev/null
> > > +++ b/common/dmdelay
> > > @@ -0,0 +1,89 @@
> > > +##/bin/bash
> > > +#
> > > +# Copyright (c) 2016 Red Hat, Inc.  All Rights Reserved.
> > > +#
> > > +# This program is free software; you can redistribute it and/or
> > > +# modify it under the terms of the GNU General Public License as
> > > +# published by the Free Software Foundation.
> > > +#
> > > +# This program is distributed in the hope that it would be useful,
> > > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > > +# GNU General Public License for more details.
> > > +#
> > > +# You should have received a copy of the GNU General Public License
> > > +# along with this program; if not, write the Free Software Foundation,
> > > +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> > > +#
> > > +#
> > > +# common functions for setting up and tearing down a dmdelay device
> > > +
> > > +DELAY_NONE=0
> > > +DELAY_READ=1
> > > +
> > > +echo $MOUNT_OPTIONS | grep -q dax
> > > +if [ $? -eq 0 ]; then
> > > +	_notrun "Cannot run tests with DAX on dmdelay devices"
> > > +fi
> > > +
> > > +_init_delay()
> > > +{
> > > +	local BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
> > > +	DELAY_DEV=/dev/mapper/delay-test
> > > +	DELAY_TABLE="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 0"
> > > +	DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 10000 $SCRATCH_DEV 0 0"
> > > +	$DMSETUP_PROG create delay-test --table "$DELAY_TABLE" || \
> > > +		_fatal "failed to create delay device"
> > > +	$DMSETUP_PROG mknodes > /dev/null 2>&1
> > > +}
> > > +
> > > +_mount_delay()
> > > +{
> > > +	_scratch_options mount
> > > +	mount -t $FSTYP $SCRATCH_OPTIONS $MOUNT_OPTIONS $DELAY_DEV $SCRATCH_MNT
> > 
> > I replaced mount with $MOUNT_PROG :)
> > 
> 
> Thanks.
> 
> > > +}
> > > +
> > > +_unmount_delay()
> > > +{
> > > +	$UMOUNT_PROG $SCRATCH_MNT
> > > +}
> > > +
> > > +_cleanup_delay()
> > > +{
> > > +	# If dmsetup load fails then we need to make sure to do resume here
> > > +	# otherwise the umount will hang
> > > +	$DMSETUP_PROG resume delay-test > /dev/null 2>&1
> > > +	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
> > > +	# wait for device to be fully settled so that 'dmsetup remove' doesn't
> > > +	# fail due to EBUSY
> > > +	$UDEV_SETTLE_PROG >/dev/null 2>&1
> > > +	$DMSETUP_PROG remove delay-test > /dev/null 2>&1
> > > +	$DMSETUP_PROG mknodes > /dev/null 2>&1
> > > +}
> > > +
> > > +# _load_delay_table <table> [lockfs]
> > > +#
> > > +# This defaults to --nolockfs, which doesn't freeze_fs() before loading the new
> > > +# table, so it simulates power failure.
> > 
> > Seems this comment is for dmflakey and needs update. Can you please
> > confirm? I can fix it at commit time if needs update, no v2 is needed.
> > 
> 
> Hmm, the command itself is part of the dmsetup suspend command, but the
> power failure bit is probably not relevant since we aren't dropping
> I/Os. We could just kill that part of the comment (everything after the
> comma)..?

Looks fine to me. Updated and committed. Thanks for the test!

Eryu
--
To unsubscribe from this list: send the line "unsubscribe fstests" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Dave Chinner July 1, 2016, 1:31 a.m. UTC | #4
On Thu, Jun 30, 2016 at 09:19:22PM +0800, Eryu Guan wrote:
> On Thu, Jun 30, 2016 at 08:49:33AM -0400, Brian Foster wrote:
> > Add some infrastructure in common/dmdelay to support use of the dm-delay
> > device-mapper module within tests. This is effectively copied from the
> > existing infrastructure in common/dmflakey. This provides the ability to
> > delay I/O. It only supports delaying read I/O as that is all that is
> > required at this point in time.
> > 
> > Signed-off-by: Brian Foster <bfoster@redhat.com>
> > ---
> >  common/dmdelay | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 89 insertions(+)
> >  create mode 100644 common/dmdelay
> > 
> > diff --git a/common/dmdelay b/common/dmdelay
> > new file mode 100644
> > index 0000000..c53e2dd
> > --- /dev/null
> > +++ b/common/dmdelay
> > @@ -0,0 +1,89 @@
> > +##/bin/bash
> > +#
> > +# Copyright (c) 2016 Red Hat, Inc.  All Rights Reserved.
> > +#
> > +# This program is free software; you can redistribute it and/or
> > +# modify it under the terms of the GNU General Public License as
> > +# published by the Free Software Foundation.
> > +#
> > +# This program is distributed in the hope that it would be useful,
> > +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > +# GNU General Public License for more details.
> > +#
> > +# You should have received a copy of the GNU General Public License
> > +# along with this program; if not, write the Free Software Foundation,
> > +# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
> > +#
> > +#
> > +# common functions for setting up and tearing down a dmdelay device
> > +
> > +DELAY_NONE=0
> > +DELAY_READ=1
> > +
> > +echo $MOUNT_OPTIONS | grep -q dax
> > +if [ $? -eq 0 ]; then
> > +	_notrun "Cannot run tests with DAX on dmdelay devices"
> > +fi
> > +
> > +_init_delay()
> > +{
> > +	local BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
> > +	DELAY_DEV=/dev/mapper/delay-test
> > +	DELAY_TABLE="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 0"
> > +	DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 10000 $SCRATCH_DEV 0 0"
> > +	$DMSETUP_PROG create delay-test --table "$DELAY_TABLE" || \
> > +		_fatal "failed to create delay device"
> > +	$DMSETUP_PROG mknodes > /dev/null 2>&1
> > +}
> > +
> > +_mount_delay()
> > +{
> > +	_scratch_options mount
> > +	mount -t $FSTYP $SCRATCH_OPTIONS $MOUNT_OPTIONS $DELAY_DEV $SCRATCH_MNT
> 
> I replaced mount with $MOUNT_PROG :)

Shouldn't this also be using _common_dev_mount_options()?, as per
_scratch_mount_options?

Cheers,

Dave.

Patch
diff mbox

diff --git a/common/dmdelay b/common/dmdelay
new file mode 100644
index 0000000..c53e2dd
--- /dev/null
+++ b/common/dmdelay
@@ -0,0 +1,89 @@ 
+##/bin/bash
+#
+# Copyright (c) 2016 Red Hat, Inc.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+#
+# common functions for setting up and tearing down a dmdelay device
+
+DELAY_NONE=0
+DELAY_READ=1
+
+echo $MOUNT_OPTIONS | grep -q dax
+if [ $? -eq 0 ]; then
+	_notrun "Cannot run tests with DAX on dmdelay devices"
+fi
+
+_init_delay()
+{
+	local BLK_DEV_SIZE=`blockdev --getsz $SCRATCH_DEV`
+	DELAY_DEV=/dev/mapper/delay-test
+	DELAY_TABLE="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 0"
+	DELAY_TABLE_RDELAY="0 $BLK_DEV_SIZE delay $SCRATCH_DEV 0 10000 $SCRATCH_DEV 0 0"
+	$DMSETUP_PROG create delay-test --table "$DELAY_TABLE" || \
+		_fatal "failed to create delay device"
+	$DMSETUP_PROG mknodes > /dev/null 2>&1
+}
+
+_mount_delay()
+{
+	_scratch_options mount
+	mount -t $FSTYP $SCRATCH_OPTIONS $MOUNT_OPTIONS $DELAY_DEV $SCRATCH_MNT
+}
+
+_unmount_delay()
+{
+	$UMOUNT_PROG $SCRATCH_MNT
+}
+
+_cleanup_delay()
+{
+	# If dmsetup load fails then we need to make sure to do resume here
+	# otherwise the umount will hang
+	$DMSETUP_PROG resume delay-test > /dev/null 2>&1
+	$UMOUNT_PROG $SCRATCH_MNT > /dev/null 2>&1
+	# wait for device to be fully settled so that 'dmsetup remove' doesn't
+	# fail due to EBUSY
+	$UDEV_SETTLE_PROG >/dev/null 2>&1
+	$DMSETUP_PROG remove delay-test > /dev/null 2>&1
+	$DMSETUP_PROG mknodes > /dev/null 2>&1
+}
+
+# _load_delay_table <table> [lockfs]
+#
+# This defaults to --nolockfs, which doesn't freeze_fs() before loading the new
+# table, so it simulates power failure.
+_load_delay_table()
+{
+	table="$DELAY_TABLE"
+	[ $1 -eq $DELAY_READ ] && table="$DELAY_TABLE_RDELAY"
+
+	suspend_opt="--nolockfs"
+	[ $# -gt 1 ] && [ $2 -eq 1 ] && suspend_opt=""
+
+	# run a suspend/resume cycle to avoid excessive resume delays once a
+	# delay is introduced below
+	$DMSETUP_PROG suspend $suspend_opt delay-test
+	$DMSETUP_PROG resume $suspend_opt delay-test
+
+	$DMSETUP_PROG suspend $suspend_opt delay-test
+	[ $? -ne 0 ] && _fatal "failed to suspend delay-test"
+
+	$DMSETUP_PROG load delay-test --table "$table"
+	[ $? -ne 0 ] && _fatal "failed to load table into delay-test"
+
+	$DMSETUP_PROG resume delay-test
+	[ $? -ne 0 ] && _fatal  "failed to resume delay-test"
+}